HomeMy WebLinkAboutMaterial Safety Data SheetRECEIVED
MAR 01 1011
Permitting Department
St. Lucie County
Material Safety Data Sheet
Section 1: Product Identification and Emergency Information
Product Description
Foamed, colored polyolefin material WearDeck'"
Chemical Description
HDPE (High Density Polyethylene) with (less than
reinforced & semi -reinforced extruded products
25%) calcium carbonate in base HDPE resin. 5 5%
of overall total weight is fibrous glass, < 2.5% by
wt of organic surface binder.
Address
Phone Number
5111 South Pine, Suite G
(352) 425-8867
Ocala, FL. 34480
Section 2: Material Identification and Information
Non -Hazardous Ingredients
HDPE (High Density Polyethylene) with (less than 25%)
calcium carbonate
Hazardous Ingredients
<_ 5% of overall total weight is fibrous glass with < 2.5%
of organic surface binder.
Note: Fiberglass may cause mechanical irritation to the skin, eye and upper respiratory tract.
Section 3: Physical and -Chemical Characteristics
Appearance
Odor
Non -Translucent, Colored Extruded Product
Slight
Boiling Point
Melting Point
N/A
250°F 121°C
Vapor Pressure (mm HG)
Specific Gravity (H2O =1), (g/cc)
N/A
0.65-0.88
Solubility in Water
Evaporative Rate
Negligible
Negligible
Vapor Density (air =1)
Evaporation Point
N/A
N/A
Section 4: Fire and Explosion Hazard Data
Flash Point
Auto -Ignition Temperature
645°F 340°C
645°F 340°C
Fiberglass component will not,support
combustion
Flammable Limits (LEL
Flammable Limits (UEL)
N/A
N/A
Extinguish Media
Special Fire Fighting Instructions
Carbon dioxide, foam, dry chemical water spray
Use self -contains breathing apparatus.
Use standard chemical firefighting procedures
Unusual fire and explosion hazards
NFPA Hazard ID
Exposure to fire can generate toxic fumes.
Health: 1, Flammability: 1, Reactivity: 0
High dust levels may create potential for
explosion.
FIDE COP