HomeMy WebLinkAboutAO SMITH 200 GALLON HOLDING TANK Page 1 of 4
Revised October 2012 AOSTT35300
Commercial Sto rage Tanks
UNINSULATED
STANDARD STOCK BARE STORAGE TANKS
A. O. Smith commercial hot water storage tanks are designed for use with gas/electric
water heaters and boilers to provide additional hot water storage capacity for systems
with large hot water draws. A. O. Smith glasslined storage tanks are designed and
recommended for systems with operating temperatures up to 180°F.
PERMAGLAS® GLASSLINING
All internal surfaces exposed to water are glasslined per ASME
HLW procedures, using an NSF-approved glasslining compound
Glass is highly resistant to effects of temperature, corrosion
and electrolysis
SIZES FROM 80 TO 1,000 GALLONS IN STOCK
All tanks in table on reverse side are normally carried in stock
for immediate shipment, providing a fast solution for retrofit
requirements
HORIZONTAL OR VERTICAL MOUNTING
A. O. Smith standard stock tanks (except the T-80S, T-120S and
TL-500A) are shipped factory standard with leg sockets for
vertical installation, but are also designed to have the proper
inlet/outlet openings that allow horizontal installation
For horizontal installations, optional tank saddles are required
(TL-500A is horizontal only)
T-325 ASME RETROFIT SPECIAL
The T-325 ASME (34 x 84) is designed to provide maximum storage
capacity and fit through a 36” door
MAGNESIUM ANODES
For extra protection against corrosion
WORKING PRESSURES
Tanks tested at pressures assigned in accordance with working pressures shown in
table on reverse side
CUSTOM TANKS
In order to offer storage tanks for immediate shipping, the A. O. Smith Standard
Stock Tanks are offered with only those openings and features shown in the
following tables
A. O. Smith also offers a full line of custom tanks from 80 to 12,500 gallons built to
meet your specifications and are available with many options such as various
working pressures, lifting lugs, handholes, manholes, special linings, special
openings, factory jacket/installation, and built to military specifications
For custom tanks, please see the A. O. Smith Custom-Line HD storage tank
spec sheet
MODELS
T-80
THROUGH
T-1000
(OPTIONAL)
CRN
Low Lead Content
250661_AOSTT35300.indd 1250661_AOSTT35300.indd 1 10/5/12 9:44 AM10/5/12 9:44 AM
Commercial Storage Tanks
OPTIONS
ASME and National Board Certification sheets - furnished upon request
Tanks saddles - two per horizontal tank required
FIVE-YEAR LIMITED TANK WARRANTY
For complete information, consult written warranty or contact A. O. Smith
Page 2 of 4
www.hotwater.com AOSTT35300
250661_AOSTT35300.indd 2250661_AOSTT35300.indd 2 10/5/12 9:44 AM10/5/12 9:44 AM
Commercial Storage Tanks
Page 3 of 4
www.hotwater.com AOSTT35300
MODEL
NUMBER
GALLON
CAPACITY
OVERALL
DIMENSIONS
INCHES
ABCDEFGH J KNP
APPROX.
SHIPPING
WEIGHT
T-80 STD 80 20 x 62-1/8 20 61-1/2 2 – 7 2 3/4 46-1/4 16 3-1/2 3-1/4 4 170
T-120 STD 119 24-1/4 x 65 24-1/4 64-3/8 2 – 7 2 3/4 34-1/2 15-1/2 10-1/2 3-1/2 4-1/8 287
T-200 STD 200 30 x 72 30 70-3/4 2-1/2 10 13 2-1/2 3/4 28-1/2 19-1/2 13 – 4 460
T-350 STD 350 36 x 88 36 86 2-1/2 14 16 2-1/2 3/4 31-1/2 20-1/4 16 – 4 670
T-140 ASME 140 24 x 76-1/4 24 75 2-1/2 8 12 2-1/2 3/4 27-1/2 18-1/2 12 – 4 400
T-200 ASME 200 30 x 72 30 70-3/4 2-1/2 10 13 2-1/2 3/4 28-1/2 19-1/2 13 – 4 460
T-250 ASME 250 30 x 84 30 84 2-1/2 10 13-1/4 2-1/2 3/4 28-1/2 19-1/2 13 – 4 505
T-325 ASME 325 34 x 84 34 84 2-1/2 12 13-1/4 2-1/2 3/4 28-3/4 19-3/4 13-3/4 – 5 600
DIMENSION AND SHIPPING WEIGHTS
T-350 ASME 350 36 x 88 36 86 2-1/2 14 16 2-1/2 3/4 31-1/2 20-1/4 16 – 4 670
T-400 ASME 400 36 x 97 36 96 2-1/2 14 16 2-1/2 3/4 31-1/2 20-1/4 16 – 4 775
TN-500 ASME 500 42 x 89 42 88 3 16 18 3 3/4 33-1/2 24-1/2 18 – 5 815
T-500 ASME 500 48 x 74 48 72-3/4 3 18 18 3 3/4 32-3/4 26-3/4 19-3/4 – 6 950
T-750 ASME 750 48 x 106 48 105 3 18 19-3/4 3 3/4 32-3/4 26-3/4 19-3/4 – 6 1290
T-1000 ASME 1000 48 x 138 48 136 3 18 19-3/4 3 3/4 32-3/4 26-3/4 19-3/4 – 6 1655
Working pressure for Standard models T-80, T-120 and T-200: 150 psi
Working pressure for ASME models T-140 and T-200 through T-1000: 125 psi
OPTIONAL TANK SADDLES FOR HORIZONTAL TANK INSTALLATIONS
HORIZONTAL TANK SADDLES
PART
NUMBER
TANK
DIAMETER AB
9500007145 20 22 6
9500007146 24 26 6
9500007147 30 32 6
9500007149 36 38 6
9500007150 42 44 6
9500007152 48 50 6
250661_AOSTT35300.indd 3250661_AOSTT35300.indd 3 10/5/12 9:44 AM10/5/12 9:44 AM
Commercial Storage Tanks
SUGGESTED SPECIFICATION
Glasslined storage tank(s) shall be A. O. SMITH glasslined storage tank(s) or equal. Tank(s) shall be ____” x ____” and
have a nominal capacity of _______ gallons. Tank(s) shall have threaded openings as shown on drawings. Exterior of
tank(s) shall be thoroughly cleaned and painted. Interior of tank(s) shall be glasslined with an alkaline borosillcate
composition which has been fused to the steel base by firing at a temperature of 1500°F. All internal surfaces exposed
to water are glasslined per ASME HLW code procedures using an NSF - approved glasslining compound. Cathodic
protection shall be provided. The storage tank(s) shall have a working pressure of ______ psi. The storage tank shall
have a five-year limited warranty as outlined in the written warranty.
UNINSULATED
STANDARD STOCK BARE STORAGE TANKS
Page 4 of 4
www.hotwater.com AOSTT35300
For Technical Information and Automated Fax Service, call 800-527-1953. A. O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
250661_AOSTT35300.indd 4250661_AOSTT35300.indd 4 10/5/12 9:44 AM10/5/12 9:44 AM