HomeMy WebLinkAboutAPPROVED DESIGN PRESSURE CALULATIONSDATE: 3/26/21 Order No.: 21RO219
CLIENT: Atlas Roofing
ADDRESS: 851 South Deerfield Avenue; Deerfield Beach, FL 33441
PROTECT: 8000 South U.S. Hwv 1
Flat Concrete Deck
ADDRESS: 8000 South U.S. Hwy 1: Port St Lucie, FL 34952
ASCE 7-16 DESIGN PRESSURE CALCULATIONS
In Accordance with Chapter 30, Part I
Proiect Information:
Height = 40'
Length = 80'
Width = 75'
Parapet Wall: < 3'
Design Calculations:
Velocity Pressure:
Flat Concrete Deck
Exposure: C
Category: II
Slope: < 7°
Phone: 954-784-2941
E*-Fax: 954-784-7875
admin@fed-eng.com
www.fed-eng.com
Ultimate Windspeed: Vwt= 170 mph
Basic Windspeed: V.d = 132 mph
KZ = 1.04 Kd = 0.85
q = 0.00256*[(1.04)(0.85)(1.00)(1.00)(132)2]
39.4 psf
Width of Pressure Coefficient Zone 1 and 2 0.6(40') — 24.0'
Length of Pressure Coefficient Zone 3 0.6(40') = 24.0'
Width of Pressure Coefficient Zone 3 0.2(40') = 8.0'
Effective Wind Tributary Area: <10f 2
For parapet height three feet (T) or larger, zone three (3) can be treated as zone two (2) (ASCE 7-16).
External Pressure Coefficient:
11)
GCP F =
-0.9
1)
GCP1 =
-1.7
2)
GCP3 =
-2.3
3)
GCP3
— -3.2
Desien Pressures:
Internal Pressure Coefficient:
1) GCPi — 0.18
Zone 1' P1' = 39.4*(-0.9 - 0.18) = -42.6 psf
Zone 1 P1 = 39.4*(-1.7 - 0.18) = -74.1 psf
Zone 2 P2 = 39.4*(-2.3 - 0.18) = -97.8 psf
Zone 3 P3 = 39.4*(-3.2 - 0.18) = -133.3 psf
ac MIAM
aMADE F�OT
�a'I'f51'i38 A[rxtC:n>s . -'
Page 2
3126/21
8000 South US 1
Port St. Lucie, FL
Attachment_ Requirements:
Based on RAS-117 and N.O.A. #20-0723.27; with a design pressure of -635 psf; the referenced system is
approved with base sheet adhered to the primed concrete deck with approved mopping asphalt applied
withing the EVT range and at a rate of 20-40 lbs./sq. Ply sheet adhered to base sheet with approved mopping
asphalt applied withing the EVT range and at a rate of 20-401bs./sq. Membrane adhered to ply sheet with
approved mopping asphalt applied withing the EVT range and at a rate of 20-401bs./sq.
Notes: All work shall be in compliance with the local building code product control notice of
acceptance and manufacturer specifications and the Florida Building Code 2020 edition.
Wind load calculations based on ASCE 7-16 and information provided by client.
All work shall be inspected by our field engineer or city inspector to verify compliance
with specifications.
Digitally signed by Keith
LeBlanc, P.E.
*r,,,,,,,a• DN: c=US, st=Florida,l=Oakland
,`" �p4iN tFe ••,, Park, o=Federal Engineering &
���GENgF.{yy`i
Testing, Inc., ou=FL Professional
No.69394
*; '•,* Engineer #59394, cn=Keith
* LeBlanc, P.E., email=keith@fed-
` STATE OF , r�,�d•
eng.com Date: 2021.03.26 09:32:02 -04, 00
a c i MtAFIFiJV>C1E F D O�
NM9HTU R18hcaxf3ae �- -�