HomeMy WebLinkAboutPA FL9777-R13BCFSname I Leg In user Rea lStratian Hot7opies SubmltSurcharge i Salts&Fact= � Puh]Fcatibns Contact us BMSStteMa I
R IJnks Search
Fitxlt��
fy' � Produrt Approval
Y-j USER: Public user
'V1 Men Prod or A li do h n AGD icatlon Li n Appncation oetair
FL n
Application Type
Cade Version
Application Status
Comments
Archived
Product Manufacturer
Address/Phone/Email
Authorized Signature
Technical Representative
Address/Phone/Email
Quality Assurance Representative
Address/Phone/Email
Category
Subcategory
Compliance Method
Florida Engineer or Architect Name who developed
the Evaluation Report
Florida License
Quality Assurance Entity
Quality Assurance Contract Expiration Date
Validated By
Certificate of Independence
Referenced Standard and Year (of Standard)
FL9777-R13
Revision
2020
Approved
Owens Corning
One Owens Coming Parkway
Toledo, OH 43659
(740)404-7829
greg.keeler@owenscorning.com
Greg Keeler
greg-]<eeler@owenscarning.com
Roofing
underlayments
Evaluation Report from a Florida Registered Architect or a Licensed Florida
Professional Engineer
Evaluation Report - Hardcopy Received
Zachary R. Priest
PE-74421
PP I Construction Materiais Technologies, LLc
12/31/2074
Steven M. Urich, PE
J Validation Checklist - Hardcopy Received
'1.4777_B13—= OCRI4002,10a 20PCI N -HV
f1a�.p�
Standard
Year
ASTM D 1970
2015
ASTM ❑ 226
2009
ASTM G 155
2013
hops:lfwww.floridabuilding.org/prlpr app_dtl.aspx?param=wGEVXQwtf)gtgkc:MG61CW11%2fZr7gdugvKoCLUG7APd%2fOgNMaJns15ew9fi3dl3d
Page 1 of 3
TA5 103
UL 1897
Equivalence of Product Standards
Certified By
Sections from the Code
2020
2012
Product Approval Method Method 1 option D
Date Submitted
10/22/2020
Date Validated
10/23/2020
Date Pending FSC Approval
10/28/202G
Date Approved
12/15/2020
Date Revised
12/1712020
Summary of Products
FL #
Model, Number or Name
9777.1� Weatherlock G
Limits of Use
Approved for use in HVHZ: r4o
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: N/A
Other: see evaluation report for limits of use.
9777.2 WeatherLock G (High Tear)
Limits of Use
Approved for use in HVHZ: Nc
Approved for use outside HVHZ: yes
Impact Resistant: N/A
Design Pressure: N/A
Other: See evaluation report For, limits of use.
9777.3 Weatherlock MAT
Limits of Use
Approved for use in HVHZ: Yes
Approved for use outside HVHZ; No
Impact Resistant: N/A
Design Pressure: N/A
Other: See evaluation report for limits of use.
9777.4
Weatherlock MAT
Limits of Use
Approved for use in HVHZ! No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: N/A
Other: See evaluation report for limits of use
Description
Weatherproofing Underlayment
Installation Instructions
FL47'77 RI? 11 0CR140 .10 202 FB v I W tY ri
naLpff
Verified By: Zachary R, priest 74021
Created by Independent Third Party: Yes
Evaluation Reports
9777 P,13 AE OCR14002,10a 70 n FSC Eval Weatherlock
ygn-;1VH,4 tinal Anrif
Created by Independent Third Party: Yes
' Weatherproofing Underlayment
installation Instructions
4777 II O R 0 a (120 F val Wan I ck
Nan-HVHZ final.
Verified By: Zachary R. Priest PE-74021
Created by Independent Third Party: Yes
Evaluation Reports
L 7 7 R13 AE OCR14OD2 l0a 2020 F$C Eval-Weatherlock '
Npn-HVHZ final.pdf
Created by Independent Third Party-
Waterproofing Underlayment
Installation Instructions
ELUZZ luUO ¢ 2 Wtherlock
VHz finall,w
Verified By: Zachary R. Priest 74021
Created by Independent Third Party-. Yes
Evaluation Reports
9 7 RI _AE 4 B vai Wea ! 41S
dYH7 final.Ddf
Created by Independent Third Party: Yes
Waterproofing Underlayment
Installation Instructions
EL9777 R1 I3 R14 .l Qa 2 20 FBC Eval We h rl
oCk
.Non-HVHZ f[na 1. P-C—If
Verified By: Zachary R, Priest 74021
Created by Independent Third Party: Yes
Evaluation Reports
JL9777 1113 AF_ OCR1q�fj2,10a 2020 F6� Ev_8f W therlo_r_k
Mon-HVH7 final.
https:pwww.riorldabuliding.org/pr/pr_a pp_dti.aspx?param=wGEVXQwtDgtgkcMG blrW71%2fZr7gdugvKDCLUr,7APd /2fogN Mains 15ew%sdf 3d
Page 2 of 3
Created by Independent Third Party: Yes
9777.5 WeatherLock Metal Weatherproofing Underlayment
Limits of Use i Installation Instructions
Approved for use in HVHZ: No EL9777 _ 2. 2 6+~_s<val Weath _r i
Approved for use outside HVHZ: Yes Nan-HVHZ final.odF
Impact Resistant: N/A Verified By: Zachary R. Priest PE-74o21
Design Pressure: N/A Created by Independent Third Party: Yes
Other: See evaluation report for limits of use. Evaluation Reports
�77_8Q_AL_OCR146n2.1oa 2020 FBC E"Al wapt rinrlr
RQ%HV}j-Z_Fina� of
( Created by Independent Third Party- Yes
9777.E Weatherl-ock Metal
-
f Weatherproofing Underlayment
Limits of Use
---
Installation instructions
Approved for use in HVHZ: Yes
FL9777 R13 II QC1114 02.1 2020 FDC Eval by a h dock
Approved for use outside HVHZ: No
HVHZ firlal.pdf
Impact Resistant: N/A
Design Pressure: NIA
Verified By: Zachary R. Priest PE-74021
Other: See evaluation report for limits of use,
Created by Independent Third Party: Yes
evaluation Reports
FL 777 R13 AE OCR14QQ2.10b 2020 FQC Eval Weatherlock
HVHZ Final .Qd.f
Created by Independent Third Party:
9777.7 WeaHlerLock Specialty The &Meta[
Yes
Weatherproofing Underlayment
Limits of Use
Approved for use in HVHZ; NO
Installation Instructions
Approved for use outside HVHZ: Yes
Ft, 777 R13 C:R14002, roQ.EBC vy rl ock
the
LV�HVHZ finaL�f
Verified By: Zachary R. Priest 74021
impact Resistant: NSA
Design Pressure: +0/-142.5
Other: See evaluation report for limits of use.
Created by Independent Third Party: Yes
Evaluation Reports
FL9777 RD—AF—R -10a 202C FBC Eval Weatherlock
Non-HVHZ final pdE
Created by Independent Third Party: Yes
i3nck hc.*_t
Contaee Os :: 260191afr Stone Road, Pllahas� s e�99 PRone. u5n.487 -1$2,j
The State cf Florida Is an AA/EEO employer Saovrioht 2nU7-2oi3 State of Florida, . A�1-.Y 5:tatement :: A"e55i1biliN Statement .: Rind Statement
under Flurida law, email addresses are public records. If you do not want your a - Mal l address released In response to a public-tecords request, do not send electionlc
mail to this entity. Instead, contact: the ornce by phone or by traditlonaF mail. If you have any questions, please contact i356.487.1395. *Pursuant to Sernpn
455.275[1), Florida SG7 CU [CS, affect ve October 3, 2012, ilCensee9 IICen5ed under Chapter 455, F.S. must provide the Department with an emad address If they have
one. The emalls provided may be used for offlclal communication with the Ilcensee. However email addre SSP5 are public record_ If yotA do not wish to supply a
personal address, please provide the Department with an email address which can be made available to the public. To determine if you are a licensee under Chapter
455, F_S., please click h re .
Product Approval Accepts;
Credit card
Safe
httpS:J1www.tloridabuilding.argJprjpr_app_dtl.aspx?param=wGEVXQwtDgtgkcMGbICW7i%2fZr7gdugvKoCLUG7APdl2fOgNMnJnsl5ew%3d%3d Page 3 of 3
Certificate of Authorization No. 29824
�. 17520 Edrnburgfl Drive
CREEK
�, • .:..i Tampa, FL 33647
TECHNICAL SERVICES, L,LC (813)480-3421
EVALUATION REPORT FLORIDA BUILDING CODE, 7T" EDITION (2020)
Manufacturer: OWENS CORNING Issued October23, 2020
1 Owens Corning Parkway
Toledo, OH 43657
(800) 438-7465
wwwowenscornin -coin
Manufacturing Location: Brentwood, NH
Houston, TX
Quality Assurance: PRI Construction Materials Technologies, LLC (QUA9110))
SCOPE
Category:
Roofing
Subcategory:
Underlayments
Code Sections:
1504.3.1, 1507.1.1
Properties:
Physical properties
REFERENCES
Entity
PRI Construction Materials Technologies (TST5878)
Report No-
NEI-039-02-01
Standard
ASTM D 1970
Year
PRI Construction Materials Technologles (TST5878)
PRI Construction Materials Technologies (TST5878)
NEI-042-02-01REV2
NE1-045-02-01
ASTM D 197C
2015a
20152
PRI Construction Materials Technologies (TST5678)
NEI-053-02-0i
ASTM G 155
ASTM G 155
2013
PRI Construction Materials Technologies (TST5878)
PRI Construction Materials Technologies (rST5878)
NEI.093.02-02
CCF-213-02-01
ASTM D 1970
2013
2015a
PRI Construction Materials Technologies (TST5878)
OCF-237-02-01
ASTM D 1623
2009
PRI Construction Materials Technologies (TST5878)
OOF-252-02-01
UL 1897
ASTM 0 4798
2012
2011
PRI Construction Materials Technologies (TST5878)
PRI Construction Malarials Technologles (TST5878)
CCF•252.02-01
OCF-253-02-02
ASTM D 1970
2015a
PRI Construction Materials Technologies (TST5878)
OCF-293-02-01
ASTM D 1970
2015a
PRI Construction Materials Technologies 9ST5878}
OCF-296-02-02
ASTM D 1970
2015a
ICC-ES AC 188'
2012
Construction Materials Technologies (TST5878)
OCF-297-02-01,1
I CC-ESPRI AC 0
ASTM
ASTM D 1970
2012
2015a
PRI Construction Materials Technologies (TST5878)
PRI Construction Materials Technologies (TST5878)
OCF-318-02-01
OCF-320-02-01
ASTM D 1970
2015a
PRI Construction Materials Technologies (TST5878)
OCF-321-02-01
ASTM G 1
ASTM D 16262 3
2005a2013
PRI Construction Materials Technologies (-TST5878)
OCF-322-02-01
UL 1397
2009
PRI Construction Materials Technologies (TST5878)
OCF-355-02-01
UL 1897
2012
PRI Construction Materials Technologies (TST5878)
1375TO120
TAS 103
2012
PRI Construction Materials Technologies (TST5878)
1378TO121
ASTM D 1623
2020
2019
'Determined to be equivalent to ASTM D 226-09, Type I
and II
TAS 103
2020
00R14002.1 a FL9777-R13 —Page 1 ^` 4
This evaluation report is provided for State of Florida product approval under Rule 61G20-3, The manufacturer shall notify CREEK Tschnical Sorvices, LLC of Any product changes or quality assurance changes throughout the duration for which this report is valid
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes h._Zl that are not
.{.-olhr o.l.i�occo.i
CREEKOVVENS CORNING ROOFING AND ASPHALT LLC
WeatherLock® Underlayments (Non-HVHZ)
` TECHNICAL SZRVIC1Es. LLC
PRODUGT DESCRIPTION AND LIMITS OF USE
WeatherLock® G WeatherLock® G is an ASTM D 1970 self -adhered underlayment constructed from SBS
(Brentwood, NH or modified asphalt, a fiberglass mat reinforcement and surfaced with granules. The
Houston, TX) product is supplied in 2-sq_ rolls with nominal dimensions of 3-ft x 66.7-ft.
WeatherLock® G is permitted to be used as prescribed in FBC Section 1507.1.1 and
Table 1507.1.1.1 for mechanically attached roofing coverings. Exposure on the roof
deck shall be limited to a maximum 30 days.
Weatherl-ockS Mat WeatherLockp Mat is an ASTM D 1970 self -adhered underlayment constructed from
(Brentwood NH or SES modified asphalt with a fiberglass mat reinforcement. The product is supplied in
Houston, TX) 1-sq. rolls with nominal dimensions of 3-ft x 33.3-ft and 2 sq. rolls with nominal
dimensions of 3-ft x 56.7-ft.
WeatherLock® Mat is permitted to be used as prescribed in FBC Section 15D7.1.1 and
Table 1507.1.1.1 for mechanically attached roof coverings. Exposure on the roof deck
shall be limited to a maximum 30 days.
WeatherLock® Metal WeatherLock(a Metal is an ASTM D 1970 self -adhered underlayment constructed from
(Brentwood, NH) SBS modified asphalt with a fiberglass mat reinforcement and plastic film surface. The
product is supplied in 2.0 sq rolls with nominal dimensions of 3-ft x 66.7-ft,
WeatherLock(D Metal is permitted to be used as prescribed in FBC Section 1507.1.1 and
Table 1507.1.1.1 for mechanically attached roof coverings Exposure on the roof deck
shall be limited to a maximurn 90 days
WeatherLockO
Specialty Tile & Metal
WeatherLock® Specialty Tile & Metal is an ASTM D 1970, TAS 103 and FRSAITRI
Florida Nigh Wind Concrete and Clay Tile Installation Manula,
(Brentwood, NH)
Sixth Edition compliant
self -adhered underlayment constructed from SBS modified asphalt and surfaced with a
non -woven polyester fabric. The product is supplied in 2.14 sq. roils with nominal
dimensions of 3-ft x 71.3-ft.
WeatherLocke Specialty Tile & Metal is permitted to be used as prescribed in FBC
Section 1507.1.1 and Table 1507.1.1 1. WeatherLock(D Specialty Tile & Metal is
permitted to be used with adhered clay or concrete tile roofing using Dupont TILE
BOND Roof Tile Adhesive. Exposure on the roof deck shall be limited to a maximum
90 days.
The maximum roof slope shall be 6712 when used with clay or concrete tile installations
vrithout battens. Tile shall be stored on battens for roof slopes greater than 6:12_ Tiles
shall not be stacked greater 10 tiles per stack,
WeatherLock® G
(High Tear)
WeatherLockg G (High Tear) is an ASTM D 1970 self -adhered underlayment used as an
(Houston, TX)
alternative to ASTM D 226, Type II roofing felt. The underlayment is composed of SBS
modified asphalt with a fiberglass mat internal
reinforcement and is surfaced with
granules_ The product is suppiled with a nominal thickness of 50 mils in 1.95-sq rolls
with nominal dimensions of 3-fix 65-$,
WeatherLock@ G (High Tear) is permitted to be used as prescribed in FBC Section
1507.1.1 and Table 1507.1.1.1 for mechanically attached
roof coverings. Exposure on
the roof deck shall be limited to a maximum 30 days.
0CR14002.10a FL9777-R13 Page 2 of
This evaluation report is provided for State of Florida product aAproval under Rule 61G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express not imply warranty, installation, recommendet[ use, or other product attributes that are not
�...,if'in- rI., art'4—aa 4 he—;n
CREEKUJIJENS CORNING ROOFING AND ASPHALT LLC
. WeatherLock& Underlayments (Non-HVHZi
=_ TEcHNICAI_ SERVICES, LLC
PRODUCT APPLICATION
Min, Roof Slope: 2:12 in accordance with the FBC
Application: All underlayments shall be iosfalled in accordance with the FBC.
Deck substrates shall be clear, dry, and free from any irregularities and debris. All
fasteners in the deck shall be checked for protrusion and corrected prior to underlayment
application. Prior to beginning installation, the underlayment steali be unrolled and
allowed to relax for a minlrT in of 3-5 minutes
The underlayment shall be installed with the release backer removed and pressed firmly
into place to ensure complete contact with the deck. The underlayment shall he installed
with the roll length parallel to the eave, starting at the eave, and with minimum 3" side
laps and minimum 6" end laps staggered min. 6-it.from preceding course
Additionally, if applying WeatherLock® Specialty Tile & Metal, end laps shall be primed
with ASTM ❑ 41 primer or sealed with asphatt roof cement a minimum of 3-4 inches
across the width of the lap.
It is permissible to back nail the underlayment 12-inches on -center as needed (nails shall
be installed perpendicular to deck with the nail heads flush to the top surface of the
underlayment).
Additionally, WeatherLockV Specialty Tile & Metal shall be back nailed when installed on
roof slopes greater than 3:12.
Min. Application 40°F; Contact the manufacturer when installing at temperatures below the minimum
Temperature: application temperature.
WIND RESISTANCE
The Maximum Design Pressures shown below were calculated using a 2:1 margin of safety per FBC Section 1504.9.
Underla merit Ryoforn Kirk.1 — %Aha2ther.4Qck 5 cial Tile & Metal Oril
Roof Deck: Min. 15132-inch CDT{ plywood attached to wood supports spaced a maximum 24" o.c.
Underlayment: WeatherLock® Specialty Tile & [Metal shall be applied in accordance with
manufacturer's installation instructions to the fastened deck and backnailed along the
selvage with minimum 12ga., 1-1/4-inch galvanized ring shank roofing nails through
optionally primed. 32ga. x 1-5/8-inch 0 tin caps spaced 12" o.c. The applied
underlayment shall be rolled with a minimum 751b steel roller immediately following
application.
Maximum Design -142 5 psf
Pressure:
OCR14002.1 Oa FL9777-R13 Page 3 of 4
This evaluation report is provided Par state or Florida protluc1 approval under Rule &1G20-3. The manufacturer shall notify CREEK
Technienl services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty. installation, recommended use, or other product attributes that are not
CREEK
PCs TECHNICAL SERVICES, LLC
GENERAL LIMITATIONS
OWENS CORNING ROOFING AND ASPHALT LLC
Weatherl-OC } Underlayments (Non-HVFIZ)
1) This evaluation report is not use in the HVHZ.
2) Fire Classification is not within the scope of this evaluation.
3) Installation of the evaluated product shall comply with this report, the FBC, and the manufacturer's published
application instructions. Where discrepancies exist between these sources, the more restrictive and FBC
compliant installation detail shall prevail.
4) The roof deck shalt he constructed of closely fitted plywood sheathing for new or existing construction.
5) The space under the deck area shalt be properly ventilated in accordance with the FBC requirements.
6) All side lap seams shall be installed to shed water from the deck.
7) The underiayment may be used as described in other current FBC product approval documents.
B) Design wind load pressures shall be determined for components and cladding in accordance with FBC
1609.
9) The roof deck shall be designed by others in accordance with FBC requirements to resist the design wind
load pressures for components and cladding.
10) Maximum Design Pressures for a given underlayment shall meet or exceed the design wind loads
determined forthe roof assembly.
11) All products listed in this report shall be manufactured under a quality assurance program in compliance with
Rule 51 G20-3.
COMPLIANCE STATEMENT
The products evaluated herein by Zachary R. Priest, P.E. have demonstrated compliance with the Florida Building
Code 7d' Edition (2020) as evidenced in the referenced documents submitted by the named manufacturer.
����1��setirreEE►
p��rf
No 74.021
STATE OF :�44t-Z
tea:
CERTIFICATION OF INDEPENDENCE
2020.10.23
09:42:3 7
-04'00'
Zachary R. Priest, P.E.
Florida Registration No. 74021
Organization No. ANE9641
CREEK Technical Services. LLC does not have, nor will it acquire a financial Interest in any company Marufacturing or distributing
products under this evaluation.
CREEK Technical Services. LLC is not owned, operated, or controlled by any company manufacturing or distributing products under
this evaluation.
Zachary R_ Priest, P.E. does not have, nor will acquire a financial interest in any company manufacturing or distributing products
under this evaluation.
Zachary R. Priest. P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
Product.
END OF REPORT
CCR14002.10a FL9777-1113 Page 4 of
This evaluation report is provided for State of Florida product approval under Rule 81G20.3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not