HomeMy WebLinkAboutEngineering ,horizontal roller window Engineering Evaluation Report# HR5510-20200909
i
i Prepared by:
A. Lynn Miller, P.E.
1070 Technology Dr.
N.Venice, FL 34275
( (941)480-1600
i Certificate of Authorization:#29296
Manufacturer:
PGT Industries, Inc.
1070 Technology Drive
North Venice, FL 34275
Product Description:
HR5510 Series Impact-Resistant Vinyl Horizontal Roller Window, (LMI), FL-29699
Compliance:
The above-mentioned product has been evaluated for compliance with the requirements of the Florida Department of
Business and Professional Regulation for Statewide Acceptance per Rule 61 G20-3.005 method 1(d). The product listed
herein complies with requirements of the current Florida Building Code.
This product has been evaluated and is in compliance with the current Florida Building Code, including the"High Velocity t
Hurricane Zone"(HVHZ).
i
Supporting Technical Documentation: j
1.Approval Document: Drawing number HR5510 LAMI Rev.A,signed and sealed by A. Lynn Miller, P.E.
2.Test Report No.: FTL-8072, FTL-8073, FTL-a074, FTL 19-9037&20-2107.1-4, signed and sealed by Idalmis Ortega,
P.E. j
Fenestration Testing Laboratories, Medley, FL 33166 +I
TAS 201-94 Large Missile Impact Test
TAS 202-94 Uniform Static Air Pressure Test
TAS 203-94 Cyclic Pressure Loading Test
3. Calculations, signed and sealed by A. Lynn Miller, P.E., dated 08/28/15&04/02/20
4. Miami-Dade RER Product Control Section NOA's; PVB Interlayer by Kuraray America, Inc.
Limitations and Conditions of use:
•Units must be glazed per ASTM E1300-09, refer to approval document for glazing details.
•This product is rated to be used in the HVHZ.
•This product is impact resistant and "does not require impact protection in wind borne debris regions:
•Frame and sash material to be extruded Vinyl.
•Units must be installed in accordance with approval document, HR5510 LAMI.
LYNA
Na:58705
, _
-
STATE OF. 4(/`
/ANAL.•S�O� '•
A. Lynn Miller, P.E.
P.E.#58705