HomeMy WebLinkAboutProduct Reviews; Smart VentESR-2074 I Most Widely Accepted -rf Try ted Page 2 of 3
_- A -
■ With the bottom of the FV _,._ =iteu a maximum of are permitter__,/'ub:, in conjunction with breakaway
12 inches (305.4 mm) above the Higher of the final walls in other areas.
grade or floor and finished exterior grade immediately 6.0 EVIDENCE SUBMITTED
under each opening.
5.0 CONDITIONS OF USE Data in accordance with the ICC-ES Acceptance Criteria
for Mechanically Operated Flood Vents (AC364), dated
The Smart Vent® FVs described in this report comply with, - August 2015.
or are suitable alternatives to what is specified in' those 7.0. IDENTIFICATION
codes listed in Section 1.0 of this report, subject to the
following conditions: The Smart VENT' models recognized in this report must
5.1 The Smart Vent® FVs must be installed in accordance
with this report, the applicable' code and the
manufacturer's installation instructions. In the event of
a conflict, the instructions in this report govern.
5.2 The Smart Vent® FVs must not be fused in the place
of "breakaway walls" in coastal high) hazard areas, but,
RECEIVED
Sl . l.uclq County, WMI9,1119
be identified by a label bearing the, manufacturer's name
(Smartven# Products, Inc.), the model number,. and the
evaluation report number (ESR-2074).
TABLE 1—MODEL SIZES
MODEL NAME
MODEL NUMBER
MODEL SIZE (in.)
COVERAGE (sq. ft.)
FloodVENT®
1540-520
153/4" X T3/4"
200
SmartVENT®
1540-510
153/4" X 73/4"
200
FloodVENT' Overhead Door
1540-524
153/47 X 7%"
200
SmartVENT Overhead Door
1540-514
153/4" X 73/4"
200
Wood Wall FloodVENT®
1540-570
14" X 83/4"
200
Wood Wall FloodVENT' Overhead Door
1540-5.74
14" X 83/4"
200'
SmarlVENT' Stacker
1540-511
16" X 16"
400
FloodVent® Stacker
15401-521
16" X 16"
400
For SI: 1 inch = 25.4 mm; 1 square foot = mZ
ESR-2074 I Most Widely Aced ll 'rusted Page 3 of 3
FIGURE 1-SMART VENT: MODEL 1540-510
FIGURE 2—SMART VENT MODEL 1540-520
FIGURE 3=SMART VENT: SHOWN WITH FLOOD DOOR PIVOTED OPEN