The URL can be used to link to this page

Home My WebLink AboutAPPROVED, ems_catalog_complete_HURRICANEEastern Metal Supply www.easternmetal.com • info@easternmetal.com 02/08/21 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 01 2021 Approved Hurricane & Security Products • FBC (Non-HVHZ): Meets Florida Building Code for Non-High Velocity Hurricane Zones • FBC (HVHZ): Meets Florida Building Code for High Velocity Hurricane Zones • TDI: Meets Texas Department of Insurance Standards • IBC: Meets International Building Code • IRC: Meets International Residential Code • Miami-Dade NOA: Meets Florida Building Code for High Velocity Hurricane Zones (Dade County) Copyright© 2021 Eastern Metal Supply, Inc. HV, Bertha are all trademarks of Eastern Metal Supply, Inc. All rights reserved. Product Description FBC (Non-HVHZ) FBC (HVHZ) TDI Evaluation IBC/IRC Miami-Dade Assoc. Approval • PANELS: Aluminum, Steel, Polycarbonate & Fabric: 2” 28 Ga Galvanized Steel BERTHA™ Panel FL 22270 DWG#: EMS005 FL 22270 DWG#: EMS004 2” .050 Aluminum BERTHA™ Panel FL 11964 DWG#: 20-183 TDI Pending Pending 2” 24 GA Galv. Steel BERTHA™ Panel FL 11964 DWG#: 20-178 2” Clear Panel FL28390 DWG#: 20-28341 FL28390 DWG#: 20-28341 TDI Pending Pending 2-1/4” .040 Aluminum BERTHA™ Panel FL 11968 DWG#: 20-180 2-1/4” .050 Aluminum BERTHA™ Panel FL 11968 DWG#: 20-182 FL 11969 DWG#: 20-186 2-1/4” 24 GA Galvanized Steel BERTHA™ Panel FL 11968 DWG#: 20-181 2-1/4” .030 Galvanized Steel BERTHA™ Panel FL 11969 DWG#: 20-185 2-1/4” BERTHA™ Clear Panel FL 11968 DWG#: 20-184 BERTHA™ Guard Fabric Panel+ FL 13271 DWG#: 20-31278 Pending • NON-ASSA Bahama & Colonial Shutters: BERTHA™Board & Batten Shutter FL 11967 DWG# 20-188 Brickhouse Low Profile Colonial Shutter TDI Pending Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 09/05/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 02 2” Bertha™ Roll Form Storm Panel System Code Approvals: FBC (non-HVHZ), FBC (HVHZ) 2” Coverage Chart 2” .050 BERTHA™ Aluminum Storm Panel Mill Finish 1/2 panel available Code Approved: FBC (Non-HVHZ), TDI, IBC/IRC 2” 24 GA BERTHA™ Galvanized Steel Storm Panel 1/2 panel available Code Approved: FBC (Non-HVHZ), TDI, IBC/IRC 2” BERTHA™ Clear Storm Panel 1/2 panel available Code Approved: FBC (Non-HVHZ), FBC (HVHZ), TDI, IBC/IRC, Miami Dade 2” 28 GA BERTHA™ Galvanized Steel Storm Panel Code Approved: FBC (Non-HVHZ), TDI, IBC/IRC 2” Panels Hemmed Knurled .050 Aluminum FL, NC FL, NC .050 AL 1/2 Panel N/A FL, NC 24 GA Galv. Steel FL FL, NC 24 GA Galv. 1/2 Panel N/A FL 28 GA Galv. Steel FL N/A Knurled Edge Hemmed Edge Any item manufactured in FL is available via shuttle to the other branches. Any item manufactured in NC is available via shuttle to TX. FL • NC • TX maintain inventory of 20’ panels that can be offline punched and cut to size. BEFORE Installation AFTER Installation Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 10/13/17 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 2” Bertha™ Roll Form Storm Panel System Code Approvals: FBC (non-HVHZ), FBC (HVHZ) BERTHA™ U-Header 2” x .094” x 20’ 40-WH-4500 White 40-MB-4500 Bronze 40-WH-450 (.062) White Non-Approved 40-MB-450 (.062) Bronze Non-Approved BERTHA™ H-Header 2” x .094” x 20’ 40-WH-3500 White 40-MB-3500 Bronze 40-WH-350 (.062) White Non-Approved 40-MB-350 (.062) Bronze Non-Approved BERTHA™ 1” Build-Out Header 2” x .094” x 20’ 40-WH-3550 White 40-MB-3550 Bronze BERTHA™ 2” Build-Out Header 2” x .094” x 20’ 40-WH-3560 White 40-MB-3560 Bronze BERTHA™ 3” Build-Out Header 2” x .094” x 20’ 40-WH-3570 White 40-MB-3570 Bronze BERTHA™ Studless Flat Track x 20’ 40-63-615 (TX) M/F 40-WH-615 White 40-MB-615 Bronze BERTHA™ 1” Studless Track x 20’ 40-WH-630 White 40-MB-630 Bronze BERTHA™ 2” Studless Track x 20’ 40-WH-632 White 40-MB-632 Bronze BERTHA™ 3” Studless Track x 20’ 40-WH-635 White BERTHA™ Studless Angle Track x 20’ 40-WH-610 White 40-MB-610 Bronze BERTHA™ Reverse “F” Track x 20’ 40-WH-620 White BERTHA™ Stucco F-Track x 20’ MILL ORDER 52-63-5615 1/2” HURRICANE 03 Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 10/12/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 04 2-1/4” Bertha™ Roll Form Storm Panel System Code Approvals: FBC (non-HVHZ), FBC (HVHZ) 2-1/4” Coverage Chart BEFORE Installation AFTER Installation 2-1/4” Panels Hemmed Knurled .040 Aluminum N/A FL .050 Aluminum N/A FL .050 Aluminum - 1/2 Panel N/A FL 24 GA Galv. Steel FL FL 24 GA Galv. - 1/2 Panel N/A FL .030 Miami Dade Galv. Steel N/A FL Any item manufactured in FL is available via shuttle to the other branches. Knurled Edge Hemmed Edge Pre-Cut 2-1/4” Storm Panels FL: In Stock; NC: Mfg lead time less than 1 week .040 Aluminum .050 Aluminum Clear Panel Mill Finish Mill Finish Polycarbonate 80-40-33 x 33” 77-52-33 x 33” 79-06-33 x 33” 80-40-47 x 47” 77-52-47 x 47” 79-06-47 x 47” 80-40-57 x 57” 77-52-57 x 57” 79-06-57 x 57” 80-40-70 x 70” 77-52-70 x 70” 79-06-70 x 70” 80-40-88 x 88” 77-52-88 x 88” 79-06-88 x 88” 80-40-102 x 102” 77-52-102 x 102” 79-06-102 x 102” 2-1/4” .040 BERTHA™ Aluminum Storm Panel Mill Finish Code Approved: FBC (Non-HVHZ), IBC/IRC 2-1/4” .050 BERTHA™ Aluminum Storm Panel Mill Finish 1/2 panel available Code Approved: FBC (Non-HVHZ), FBC (HVHZ), TDI, IBC/IRC, Miami-Dade 2-1/4” BERTHA™ Clear Storm Panel Code Approved: FBC (Non-HVHZ), TDI, IBC/IRC 2-1/4” 24 GA BERTHA™ Galvanized Steel Storm Panel 1/2 panel available Code Approved: FBC (Non-HVHZ), IBC/IRC 2-1/4” 30 GA BERTHA™ Galvanized Steel Storm Panel 1/2 panel available Code Approved: FBC (HVHZ) Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 12/01/16 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 2-1/4” Bertha™ Roll Form Storm Panel System Code Approvals: FBC (non-HVHZ), FBC (HVHZ) BERTHA™ U-Header 2-1/4” x .075” x 19’ 41-WH-510 White 41-MB-510 Bronze BERTHA™ H-Header 2-1/4” x .075” x 19’ 41-WH-500 White 41-MB-500 Bronze Custom Lengths White (FL) 41-WH-39 x 39” 41-WH-51 x 51” 41-WH-63 x 63” 41-WH-75 x 75” 41-WH-87 x 87” 41-WH-99 x 99” BERTHA™ 1” Build-Out Header 2-1/4” x .075” x 19’ 41-WH-520 White 41-MB-520 Bronze BERTHA™ 2” Build-Out Header 2-1/4” x .075” x 19’ 41-WH-522 White BERTHA™ 3” Build-Out Header 2-1/4” x .075” x 19’ 41-WH-525 White BERTHA™ Studless Flat Track x 20’ 40-63-615 (TX) M/F 40-WH-615 White 40-MB-615 Bronze BERTHA™ 1” Studless Track x 20’ 40-WH-630 White 40-MB-630 Bronze BERTHA™ 2” Studless Track x 20’ 40-WH-632 White 40-MB-632 Bronze BERTHA™ 3” Studless Track x 20’ 40-WH-635 White BERTHA™ Studless Angle Track x 20’ 40-WH-610 White 40-MB-610 Bronze BERTHA™ Reverse “F” Track x 20’ 40-WH-620 White BERTHA™ Stucco F-Track x 20’ MILL ORDER 52-63-5615 1/2” HURRICANE 05 Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 10/08/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 06 2” Bertha™ Roll Form Storm Panel System Code Approvals: FBC (non-HVHZ), FBC (HVHZ) BERTHA™ Studded Angle 6” On Center 2 x 2 x .093 x 24’ 3” Standard: Finish: Reverse: 11-MF-500 M/F N/A 11-WH-500 White 11-WH-500RS 11-MB-500 Bronze 11-MB-500RS BERTHA™ Studded Angle 12” On Center 2 x 2 x .093 x 24’ 3” Standard: Finish: Reverse: N/A M/F N/A 11-WH-510 White Special Order 11-WH-510RS 11-MB-510 Bronze Special Order 11-MB-510RS BERTHA™ Studded Angle 12” On Center 2 x 2 x .093 x pre-cut lengths White Standard: 11-WH-39 x 39” 11-WH-51 x 51” 11-WH-63 x 63” 11-WH-75 x 75” 11-WH-87 x 87” 11-WH-99 x 99” BERTHA™ Low Profile Studded Angle 1.75 x 5/8 x 24’ 3” 6” On Center 11-WH-455 White 12” On Center 11-WH-460 White BERTHA™ Standard Angle 2 x 2 x .093 x 20’ 51-63-544 (TX) White 51-63-543 Bronze 52-63-013 Ivory BERTHA™ Standard Angle 2 x 2 x .125 x 20’ 11-63-315 M/F 11-WH-376 White 11-MB-376 Bronze 11-IV-376 Ivory 11-BG-376 Beige BERTHA™ Snap Cap x 20’ 3” 52-63-8292 White Mates with Studded Plate BERTHA™ Studded Plate x 20’ 3” 52-63-8291 White; Non Studded 52-WH-8291 White; 6” On Center MILL ORDER 52-WH-8295 12” On Center Mates with Snap Cap Standard Reverse Standard Reverse Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 08/21/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 2” Bertha™ Roll Form Storm Panel System Code Approvals: FBC (non-HVHZ), FBC (HVHZ) BERTHA™ AstroGuard MASTER ROLL 2825 Sq Ft 9’ 5” x 300’ (280 lbs) 12” OD; 3” ID Cardboard Tube Includes 4800 Screws Special Order 41-WH-95300 White Special Order 41-TN-95300 Tan BERTHA™ AstroGuard CUT-TO-LENGTH Clips Included; 6” OC, 2 Sides Only 41-WH-95300 White 41-TN-95300 Tan Based on Length BERTHA™ AstroGuard CUT-TO-SIZE Clips Included; 6” OC, 2 Sides Only 41-WH-95300 White 41-TN-95300 Tan Based on Square Footage BERTHA™ AstroGuard Clip (pack of 24) Bag includes screws and clips SPECIAL ORDER 41-CLIP-BULK Black BERTHA™ AstroGuard Clip One Each 41-BK-CLIP Black #8 x 1/2” SMS Pan Head Phillips 410 SS (Bag of 8) 41-85410PH BERTHA™ AstroGuard Storage Bag 28.5” wide x 44” Long 41-AG-BAG Maroon BERTHA™ AstroGuard Label FBC (250 per roll) LABEL-5 BERTHA™ AstroGuard Sample 10" x 10" with Label & Clip 41-WH-AGSAMPLE White 41-TN-AGSAMPLE Tan HURRICANE 07 2021 Approved Hurricane & Security Products American Shutter Systems Association FBC (Non-HVHZ): Meets Florida Building Code for Non-High Velocity Hurricane Zones FBC (HVHZ): Meets Florida Building Code for High Velocity Hurricane Zones TDI: Meets Texas Department of Insurance Standards IBC: Meets International Building Code IRC: Meets International Residential Code Miami-Dade NOA: Meets Florida Building Code for High Velocity Hurricane Zones (Dade County) ASSA Products listed above require membership to the American Shutter Systems Association unless listed otherwise. P Contact the ASSA for more information. American Shutter Systems Association 4268 Westroads Drive, West Palm Beach, FL 33407 877-999-ASSA Fax: (561) 209-8380 www.amshutter.org • info@amshutter.org HURRICANE 08 Product Description FBC (Non-HVHZ) FBC (HVHZ) TDI Evaluation IBC/IRC Miami-Dade Assoc. Approval HV® Essential Accordion FL32030 DWG #20-31274 FL32030 DWG #20-31274 HV® Accordion System (Blade 1) FL389 DWG #20-164 FL32030 DWG #20-31270 FL1850 DWG #20-169 FL32030 DWG #20-31270 TDI Pending Pending HV® Accordion System (Combo - Blade 1 & 2) FL 389 DWG# 20-163 FL 1850 DWG# 20-159 40mm BERTHA™ ER Roll Shutter End Retention FL32029 DWG #20-31262 FL32029 DWG #20-31262 FL17204 DWG #20-173 SHU-217 DWG# 19-18642 Pending 55--mm BERTHA™ ER Roll Shutter Retention & Non Retention FL 22558 DWG#: EMS002 FL 22558 DWG#: EMS003 SHU-232 DWG# EMS006 58 mm BERTHA™ ER Roll Shutter Retention & Non Retention FL5790 DWG #20-0401 FL20716 DWG #20-171 FL 17424 DWG#: 20-172 SHU-224 DWG# 15-248 Single Wall Slat Roll Shutter FL 31658 DWG#: 20-31266 FL 31658 DWG#: 20-31266 TDI Pending Pending BERTHA™ Colonial Shutter (Impact) FL 2681 DWG# 20-167 FL 2681 DWG# 20-162 DWG# 06-214 BERTHA™ Bahama Shutter (Impact) FL 2683 DWG# 20-167 FL6566 DWG# 20-161 HIGH VISIBILTY (HV) Colonial Shutter FL 8200 DWG# 20-170 Pending HIGH VISIBILTY (HV) Bahama Shutter FL 8523 DWG# 20-166 Pending Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 02/08/21 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 BERTHA HV® BLADE #1 41-COLOR-400 x 14’ 6” 41-COLOR-405 x 16’ 6” 41-COLOR-410 x 18’ Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (10 Pcs/Sub; 120 Pcs/Master) Covered under US Patents #5,458,179; #6,779,582 BERTHA HV® BLADE #2 41-COLOR-406 x 16’ 6” CLOSEOUT! 41-COLOR-411 x 18’ Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (10 Pcs/Sub; 120 Pcs/Master) Covered under US Patents #5,458,179; #6,779,582 Copyright 2007-2020 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. BERTHA HV® UNIVERSAL FLOATER x 18’ 41-COLOR-450 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (10 Pcs/Sub) ACCORDION TRACK FELT (.320/.270) 41-HV-320 Black Felt Roll x 2000’ BERTHA HV® CEILING HEADER #1 x 20’ 41-COLOR-424 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (4 Pcs/Sub) Felt: 41-HV-320 BERTHA HV® 3/8” BUILD OUT HEADER #1 x 20' 41-COLOR-425 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (4 Pcs/Sub) Felt: 41-HV-320 BERTHA HV® 1” BUILD OUT HEADER #1 x 20' 41-COLOR-426 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (4 Pcs/Sub) Felt: 41-HV-320 BERTHA HV® 2” BUILD OUT HEADER #1 x 20' 41-COLOR-433 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (4 Pcs/Sub) Felt: 41-HV-320 BERTHA HV® ACCORDION SHUTTER - BLADES 1 & 2 Code Approvals: FBC (non-HVHZ), FBC (HVHZ), IBC/IRC Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 08/13/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 09 Copyright 2007-2020 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. BERTHA HV® HD CEILING HEADER #2 x 20’ 41-COLOR-430 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (4 Pcs/Sub) Felt: 41-HV-320 BERTHA HV® HD 3/8” BUILD OUT HEADER #2 x 20' 41-COLOR-431 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (4 Pcs/Sub) Felt: 41-HV-320 BERTHA HV® HD 1” BUILD OUT HEADER #2 x 20' 41-COLOR-432 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (4 Pcs/Sub) Felt: 41-HV-320 BERTHA HV® SHD™ CEILING HEADER x 20' 41-COLOR-470 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (10 Pcs/Sub) Felt: 41-HV-320 BERTHA HV® 3/8” DIRECT MOUNT STARTER x 20’ 41-COLOR-427 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (4 Pcs/Sub) BERTHA HV® 1” DIRECT MOUNT STARTER x 20’ 41-COLOR-428 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (6 Pcs/Sub) BERTHA HV® 2” DIRECT MOUNT STARTER x 20’ 41-COLOR-434 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (6 Pcs/Sub) BERTHA HV® 90/180 STARTER x 20’ 41-COLOR-415 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (14 Pcs/Sub) BERTHA HV® ACCORDION SHUTTER - BLADES 1 & 2 Code Approvals: FBC (non-HVHZ), FBC (HVHZ), IBC/IRC Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 03/06/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 10 BERTHA HV® ADJUSTABLE TRACK w/FELT x 20' 41-COLOR-423 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (6 Pcs/Sub) Felt: 41-HV-320 BERTHA HV® SILL ADAPTOR W/LIP x 20' 90-COLOR-012 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (6 Pcs/Sub) BERTHA HV® WALKOVER TRACK x 20’ 41-COLOR-440 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (6 Pcs/Sub) Felt: 41-HV-320 Accepts Vinyl Inserts (p15) BERTHA HV® CORNER CENTERMATE #3 X 20’ 41-COLOR-429 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (6 Pcs/Sub) BERTHA HV® CENTERMATE #1 X 20’ 41-COLOR-421 Self Mating Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (6 Pcs/Sub) BERTHA HV® FEMALE T LOCK x 20’ 41-COLOR-438 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (4 Pcs/Sub) BERTHA HV® MALE T LOCK x 20’ 41-COLOR-437 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (4 Pcs/Sub) BERTHA HV® J-CLIP 52-63-4159F for T-Handle Lock MF with pretreat; 4” x 2.75” x .125” 1/4” hole 100 pc/box BERTHA HV® ANODIZED TRENCH TRACK x 20’ 41-63-437 Silver Anodized Felt: 41-HV-320 BERTHA HV® FLOATING CENTERMATE #2 X 20’ 41-COLOR-422 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) (4 Pcs/Sub) BERTHA HV® ACCORDION SHUTTER - BLADES 1 & 2 Code Approvals: FBC (non-HVHZ), FBC (HVHZ), IBC/IRC Copyright 2007-2020 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 03/06/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 11 BERTHA HV® RAINGUARD x 17’ 41-COLOR-460 (10 Pcs.) Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) BERTHA HV® BUILD-OUT ANGLE x 20’ 2-1/2 x 7 x .190 x 20’With Inside Radius 11-COLOR-420 6063-T6 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) BERTHA HV® BUILD-OUT ANGLE x 20’ 2 x 5 x .190 x 20’With Inside Radius 11-COLOR-413 6063-T6 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) BERTHA HV® VINYL INSERTS Mates with Walkover Track 41-COLOR-440 41-WH-Insert2 White x 8’ 41-IV-Insert2 Ivory x 8’ 41-MB-Insert2 Bronze x 8’ 41-BG-Insert2 Beige x 8’ 41-BK-Insert Black x 12’ BERTHA HV® COMBO BLADE LABEL LABEL-3 (250 per Roll) Warning: During periods of hurricane warnings, home- owner, tenant or others must properly close all BERTHA HV® & HD centermates and engage or lock all BERTHA HV® & HD locks. BERTHA HV® HD™ CENTERMATE WITH RODS x 20’ 41-COLOR-435 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) BERTHA HV® HD™ INSERT x 20’ 41-COLOR-436 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) BERTHA HV® HD™ CENTERMATE WITHOUT RODS x 20’ 41-COLOR-439 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) Mates with BERTHA HV® HD™ Centermates BERTHA HV® ACCORDION SHUTTER - BLADES 1 & 2 Code Approvals: FBC (non-HVHZ), FBC (HVHZ), IBC/IRC Bagged Sample 41-INSERT-RING Copyright 2007-2020 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 03/06/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 12 HV® WINDOW PUNCH SPECIAL ORDER HVPUNCH BERTHA HV® ACCORDION WINDOW 41-HV-WINDOW Patent Pending 3 HOLES - HV® BLADE # 1 X 6' Punched Window 3 Holes 41-COLOR-72P3 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) 3” Diameter Viewports on Blade (3 each) 30-1/4” End of Blade to centerline of first opening Spacing @ 5-3/4” On Center HV® WINDOW HAND TOOL HV-TOOL HVPUNCH-1 (PIC at Right) Top Row Components Left to Right: Hex Bit Socket 3/8 Sq Drive with 1/4" Hex to 3/8 Sq Drive 2" long / Base Die / Grade 8 Hex Screw & Washer Center Row Components Left to Right: Slug Knockout Tool / HV Window Hand Tool Bottom Row Components Left to Right: Cutting Die with Thrust Bearing / 1" Hole Saw BERTHA HV® ACCORDION WINDOW Code Approvals: FBC (non-HVHZ), FBC (HVHZ) 3 HOLES - HV® BLADE # 1 X 8' Punched Window 3 Holes 41-COLOR-96P3 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) 3” Diameter Viewports on Blade (3 each) 42-1/2” End of Blade to centerline of first opening Spacing @ 5-3/4” On Center 5 HOLES - HV® BLADE # 1 X 8' Punched Window 5 Holes 41-COLOR-96P5 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) 3” Diameter Viewports on Blade (5 each) 36-1/2” End of Blade to centerline of first opening Spacing @ 5-3/4” On Center Copyright 2007-2020 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 03/20/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 13 Covered under US Patents #5,458,179; #6,779,582 BERTHA HV® ACCORDION SHUTTER - BLADE 3 Code Approvals: FBC (non-HVHZ), FBC (HVHZ) COLOR = Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) Copyright 2007-2020 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. BERTHA HV® BLADE #3 x 18’ 41-COLOR-4100 - CLOSEOUT BERTHA HV® CEILING HEADER #1 x 20’ 41-COLOR-424 (4 Pcs.) Felt: 41-HV-320 BERTHA HV® (3) 3/8” BUILD OUT TRACK x 20' 41-COLOR-462 - CLOSEOUT Felt: 41-HV-320 BERTHA HV® 1” BUILD OUT TRACK x 20' 41-COLOR-426 Felt: 41-HV-320 BERTHA HV® (3) 2” BUILD OUT TRACK x 20' 41-COLOR-468 - CLOSEOUT Felt: 41-HV-320 BERTHA HV® ADJ TRACK w/FELT x 20' 41-COLOR-423 (6 Pcs.) Felt: 41-HV-320 BERTHA HV® (3) 1” DIRECT MOUNT x 20’ 41-COLOR-465 - CLOSEOUT BERTHA HV® (3) 2” DIRECT MOUNT x 20’ 41-COLOR-469 - CLOSEOUT BERTHA HV® 90/180 STARTER x 20’ 41-COLOR-415 BERTHA HV® (3) 3/8” DIRECT MOUNT x 20’ 41-COLOR-466 - CLOSEOUT BERTHA HV® (3) SILL ADAPTOR W/LIP x 20' 41-COLOR-464 - CLOSEOUT Copyright 2007-2020 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 07/10/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 14 COLOR = Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) Copyright 2007-2020 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. BERTHA HV™ Blade #1 41-COLOR-400 x 14’ 6” 41-COLOR-405 x 16’ 6” 41-COLOR-410 x 18’ (10 Pcs/Sub; 120 Pcs/Master) HV® Flat Center Mate x 20’ 41-COLOR-420 HV® Essential Ceiling Header x 20’ 41-COLOR-478 Felt: 41-HV-320 HV® Essential 3/8" Build Out x 20’ 41-COLOR-480 Felt: 41-HV-320 HV® Essential 1" Build Out x 20’ 41-COLOR-482 Felt: 41-HV-320 HV® Essential .080 Adjustable Adapter With Lip x 20’ 41-COLOR-486 HV® Essential Adjustable Track With Felt x 20’ 41-COLOR-488 HV® Essential 3/8" Direct Mount x 20’ 41-COLOR-472 HV® Essential 1" Direct Mount x 20’ 41-COLOR-474 HV® Essential 2" Direct Mount x 20’ 41-COLOR-476 HV® ESSENTIAL ACCORDION SHUTTER Code Approvals: FBC (non-HVHZ), FBC (HVHZ) HV® Essential 2" Build Out x 20’ 41-COLOR-484 Felt: 41-HV-320 HV® Holdback Clip For Flat Centermates 41-HV-HBCLIPWH White (shown) 41-HV-HBCLIPBL Black COMING SOON COMING SOON Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 09/01/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 15 BERTHA HV® “HEAVY DUTY”CENTERMATE SAMPLE HD-SAMPLE 17” x 30” Top Track: 1” Build-Out Header Bottom Track: Walkover Centermate: “HD” Centermate BERTHA HV® ACCORDION KIT HV-KIT Includes Mini Sample; Boxed 6” HV Blade 1 Components SPECIAL ORDER HV-KIT3 Includes Mini Sample; Boxed 6” HV Blade 3 Components BERTHA HV® “T-LOCK” CENTERMATE SAMPLE SPECIAL ORDER 17” x 30” HT-SAMPLE Top Track: 1” Build-Out Header Bottom Track: Walkover Centermate: “T Lock” Centermate BERTHA HV® CENTERMATE SAMPLE HV-SAMPLE 17” x 30” Top Track: 1” Build-Out Header Bottom Track: Walkover Centermate: BERTHA HV® Centermate BERTHA HV® ACCORDION SHUTTER SAMPLES BERTHA HV® ACCORDION SHUTTER RADIUS TRACK HV ® Accordion Shutter Radius Track IN STOCK - HD Tracks Ceiling/Ceiling 52-COLOR-145 (Inside/HD) 45° Color* 52-WH-190 (Inside/HD) 90° White 52-MB-190 (Inside/HD) 90° Bronze *Available in White (WH), Ivory (IV), Beige (BG) and Bronze (MB) Ideal for Large Balconies or Bay Windows Covered under US Patents 5458179 and 6779585 SPECIAL ORDER - Call for more information Custom Sizes & Lengths are Also Available Available for HD™ Tracks and SHD™ Tracks (High Rise) Price per Set 2 pc set - Sold in sets only 3 pc set - Sold in sets only Copyright 2007-2020 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 03/06/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 16 HV Bushings (boxes of 100) HVLONG1 Long White HVLONG2 Long Black HVSHORT1 Short White HVSHORT2 Short Black HVHAT1 Hat White Only HV Wheel Carriage WC10 HV Saltwater Lock & HV Thumbscrews HVPLATE - Stainless Steel Plate 31C100MTPB/HV Black Thumbscrew 31C100MTPW/HV White Thumbscrew HV Accordion Screws 14D275TUW4/HV 14 x 2-3/4” Long 14D175TUW4/HV 14 x 1-3/4” Long 10N275TUW4/HV 10 x 2-3/4" Long HV Egress Lock LOHVTT/WH White LOHVTT/BZ Bronze LOHVTT/BE Beige LOHVTT/IV Ivory LOHVTT (cylinder only) HV Push Button Lock LOHV/WH White LOHV/BZ Bronze LOHV/BE Beige LOHV/IV Ivory HD Lock LOHRHB Hook Bolt Mortise Lock –SS LOBRCL Key cylinder – Brass/SS LOBRTT Thumb turn cylinder – brass/SS HV T-Handle Lock with J-Clip LO/WH White LO/BZ Bronze LO/IV Ivory LO/BE Beige HV Locking Pins Please specify ¼-20 or 3/8-16 thumbscrew. Also specify Stainless Steel or Nylon thumbscrew HV Snap Track ECSC HV Holdback Clip HVCLIP/BZ Black HVCLIP/WH White HVCLIPFC/WH White (for Flat Centermates) HVCLIPFC/BK Black (for Flat Centermates) HV 3/8 X ¾ Acetel® Thumb Screw 37C75MTSN White 37C75MTSN/B Black please specify white or black BERTHA HV® ACCORDION COMPONENTS AVAILABLE FROM ***To Order Accordion Components Contact ALL POINTS Directly*** 1-800-226-5555 • info@allpointsscrew.com Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 05/27/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 17 40MM BERTHA™ END RETENTION ROLL SHUTTER SYSTEM (ER) Code Approvals: FBC Non-HVHZ, FBC HVHZ, IBC/IRC 40mm Double Wall Slat with Screw Boss x 22’ VENTED 40-COLOR-471 Sub Bundle Size: 10 40mm Small Leg Track x 24’ 40-COLOR-476 Mates with 40-COLOR-486 Use with 41-HV-200 Felt Also used with 55mm & Single Wall systems Sub Bundle Size: 4 Cover Cap x 12’ 40-COLOR-486 Mates 40-COLOR-476, 40-COLOR-481 Sub Bundle Size: 30 40mm Small Leg Closed Face Track x 22’ 6” 40-COLOR-478 Use with 41-HV-200 Felt Also used with 55mm & Single Wall systems Sub Bundle Size: 4 40mm Large Leg Closed Face Track x 22’ 6” 40-COLOR-483 Use with 41-HV-200 Felt Also used with 55mm & Single Wall Systems 40mm Slat Locks 90000C LEFT (bags of 100) 90001C RIGHT (bags of 100) Black 40mm Large Leg Track x 24’ 40-COLOR-481 Mates with 40-COLOR-486 Use with 41-HV-200 Felt Also used with 55mm & Single Wall systems Sub Bundle Size: 5 40mm #10 x 2 ER Screw 90003C (bags of 100) Roll Shutter Track Felt (.200/.270) 41-HV-200 Black Felt Roll x 2000’ 40mm Screw Sleeve 90002C (bags of 100) Black 40mm Hand Held Sample 40ERDW-SAMPLE Double Wall SPECIAL ORDER 40ERSW-SAMPLE Single Wall 17” x 8” with Base Slat & Lock 40mm Double Wall Slat with Screw Boss x 22’ NON-VENTED 40-COLOR-472 Sub Bundle Size: 10 COLOR = available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 03/19/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 18 40MM BERTHA™ END RETENTION ROLL SHUTTER SYSTEM (ER) Code Approvals: FBC Non-HVHZ, FBC HVHZ, IBC/IRC Additional 40mm Extrusions & Acc. on Previous page (Hurricane 19) Copyright 2007-2019 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. 40mm Base Cover x 20’ 40-COLOR-105 Mates with 40-COLOR-100 Sub Bundle Size: 20 Bottom Slat Weather Seal 41-68-101 400' Roll - 21" Reel Bulb Gasket Seal Black Mates w/ 40mm, 55mm, 58mm, 60mm Slats 40mm Base Slat Lock Guide 40-BK-800 Black Plastic Profile Base Slat Cylinder Lock 2003432-1 2003432-2 2003432-3 2003432-4 40mm Base Slat Locking Rod 10-63-265 3/16 x 1 x 20’ Mill Finish Somfy myLink™ 1811264 Requires RTS Motor; Free App Download 40mm Single Wall Sample with Assist Spring 40ERSW-SPRING 24” x 24” Manually operated by hand COLOR = available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) 40mm Base Slat x 20’ 40-COLOR-100 Mates with 40-COLOR-105 Sub Bundle Size: 8 Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 02/13/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 19 55 MM VENTED Slat x 24’ 40-COLOR-980 Sub Bundle Size: 10 55mm ER NON VENTED View Port Slat x 24’ 40-COLOR-980VPNV 55mm ER View Port Insert (.118 x .845 x 96”) 40-VP-990 Clear Polycarbonate 55mm ER Slat Lock Black 40-63-786 One Piece - NEW 55 MM End Retention Assembly Screws Phillips Head Sheet Metal Screws 41108-100 (bags of 100) All Points Product Code: 10N250TXFS/HV 55mm Small Leg Track x 24’ 40-COLOR-476 Mates with 40-COLOR-486 Use with 41-HV-200 Felt Also used with 40mm & Single Wall systems Sub Bundle Size: 4 Cover Cap x 12’ 40-COLOR-486 Mates 40-COLOR-476, 40-COLOR-481 Sub Bundle Size: 30 55mm Large Leg Track x 24’ 40-COLOR-481 Mates with 40-COLOR-486 Use with 41-HV-200 Felt Also used with 55mm & Single Wall systems Sub Bundle Size: 5 40mm Base Slat x 20’ 40-COLOR-100 Mates with 40-COLOR-105 Sub Bundle Size: 8 55mm ER Hand Held Sample 55ER-SAMPLE Base Slat Cylinder Lock 2003432-1 2003432-2 2003432-3 2003432-4 40mm Base Cover x 20’ 40-COLOR-105 Mates with 40-COLOR-100 Sub Bundle Size: 20 Base Slat Locking Rod 10-63-265 Mill Finish 3/16 x 1 x 20’ Roll Shutter Track Felt (.200/.270) 41-HV-200 Black Felt Roll x 2000’ 55MM BERTHA™ END RETENTION SYSTEM (ER) Code Approvals: FBC Non-HVHZ, FBC HVHZ, TDI COLOR = available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) Base Slat Lock Guide 40-BK-800 Black Plastic 55mm Small Leg Closed Face Track x 22’ 6” 40-COLOR-478 Use with 41-HV-200 Felt Also used with 40mm & Single Wall systems Sub Bundle Size: 4 55mm Large Leg Closed Face Track x 22’ 6” 40-COLOR-483 Use with 41-HV-200 Felt Also used with 40mm & Single Wall Systems Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 08/13/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 20 Copyright 2007-2020 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. 3” BERTHA™ ER TRACK x 24’ 40-COLOR-824PC Use with 41-HV-200 Felt BERTHA™ DADE TRACK x 24’ 6” (Non-ER) 41-COLOR-300 Available in White (WH), Ivory (IV), Bronze (MB) Use with 41-HV-200 Felt BERTHA™ ER OPEN TRACK x 22’ 6” (Open End) 40-COLOR-800 Mates with 40-COLOR-486 Use with 41-HV-200 Felt Cover Cap x 12’ 40-COLOR-486 Mates with 40-COLOR-800 Sub Bundle Size: 30 BERTHA™ ER SLAT LOCK GLIDE 40-63-799 boxed - 500 sets left and right BERTHA™ SLAT LOCK (Non-ER) 40-63-798 boxed - 1000 pcs Lock Glide Slat Lock 58mm BERTHA™ ER VENTED SLAT x 24’ 40-COLOR-805PC 40-COLOR-810PC x 21’ - CLOSEOUT NON VENTED SLAT x 24’ 40-WH-805PCNV White 58mm BERTHA™ ER VIEW PORT SLAT x 24’ 40-Color-805PCVPNV 1 x 2 Window CLEAR POLYCARBONATE VIEW PORT INSERT X 8’ 40-VP-805 1-7/16 x .090 58MM BERTHA™ END RETENTION SYSTEM (ER) Code Approvals: FBC (non-HVHZ); Open Back Slat: FBC (non-HVHZ), TDI COLOR = available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 08/18/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 21 70mm Direct Connect Tube x 24’ 40-63-429 6063-T6 Mill Finish Mates with 40-63-428 Single Wall ER Small Leg Track x 24’ 40-COLOR-476 Mates with 40-COLOR-486 Use with 41-HV-200 Felt Also used with 40/55mm systems Single Wall ER Large Leg Track x 24’ 40-COLOR-481 Mates with 40-COLOR-486 Use with 41-HV-200 Felt Also used with 40/55mm systems Single Wall ER Small Leg Closed Face Track x 22’ 6” 40-COLOR-478 Use with 41-HV-200 Felt Also used with 40/55mm systems Single Wall ER Large Leg Closed Face Track x 22’ 6” 40-COLOR-483 Use with 41-HV-200 Felt Also used with 40/55mm systems Cover Cap x 12’ 40-COLOR-486 Mates with 40-COLOR-476, 40-COLOR-481 ER Screw 90003C #10 - 8 x 2” 410 SS Dacroshield Coated (Bags of 100) Screw & Slat Lock 40-63-794 8 x 1 410 SS SDS Non End Retention Screw Plastic Non End Retention Slat Lock (Kitted in Bags of 100) Single Wall Slat Lock Guide 40-63-795 Nylon with UV Inhibitor (Bags of 200) Roll Shutter Track Felt (.200/.270) 41-HV-200 Black Felt Roll x 2000’ Base Slat x 20’ 40-COLOR-100 Mates with 40-COLOR-105 Also used with 40/55/58mm systems Short Base Slat x 24’ 40-COLOR-432 Mates with 40-COLOR-105, 40-COLOR-427 Also used with 40/55/58mm systems Base Cover x 20’ 40-COLOR-105 Mates with 40-COLOR-100, 40-COLOR-432 Also used with 40/55/58mm systems Short Base Slat T-Bar x 24’ 40-COLOR-427 Mates with 40-COLOR-432 Also used with 40/55/58mm systems 60mm Direct Connect Tube x 24’ 40-63-431 6063-T6 Mill Finish Mates with 40-63-428 Torsion Spring Adjuster* (Kitted with 3 parts) TSA1 Used with SPA-TOOL Also used with 40mm system *COLOR available in: White (WH), Ivory (IV), Bronze (MB) and Beige (BG) Also Available: Single Wall Slat* (63mm) 40-COLOR-430 x 24’ 40-COLOR-429 x 20’ Sub Bundle Size: 10 Finger Pull Slat x 24’ 40-COLOR-431 Use with spring loaded shutters only Starter Slat x 22’ 6” 40-63-428 6063-T6 Mill Finish Mates with 40-63-429, 40-63-431; Also used with 40/55mm systems *PATENT PENDING *PATENT PENDING Torsion Spring Adjuster Handle SPA-TOOL Used with TSA-1 Assist Springs: Hurricane 27 • Motors: Hurricane 38-40 End Caps - Hurricane 31-32 • Hoods - Hurricane 33 SINGLE WALL SLAT ROLL SHUTTER SYSTEM Code Approvals: FBC (HVHZ), FBC (Non-HVHZ) - FL31658 Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 03/03/21 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 22 Copyright 2007-2020 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. Bertha™ Painted Aluminum Square Tube Size in Inches Approx. Stock Code ( E x M x S color )Wt/Lin ft. 19-WH-225 3 x .125 x 20' White 1.726 19-WH-220 3 x .125 x 24' White 1.726 19-MB-235 3 x .125 x 24' Bronze 1.726 19-IV-235 3 x .125 x 24' Ivory 1.726 19-BG-235 3 x .125 x 24' Beige 1.726 19-BK-235 3 x .125 x 24' Black 1.726 19-COLOR-240 3 x .250 x 24’ ** 3.300 19-WH-245 4 x .125 x 20’ White 2.325 19-WH-400 4 x .125 x 24' White 2.325 19-MB-246 4 x .125 x 24' Bronze 2.325 19-IV-400 4 x .125 x 24' Ivory 2.325 19-BG-400 4 x .125 x 24' Beige 2.325 19-BK-400 4 x .125 x 24' Black 2.325 200-WH-028 4 x .125 x 30' White 2.325 200-MB-028 4 x .125 x 30' Bronze 2.325 19-WH-2500 4 x .250 x 20’ White 4.500 19-MB-2500 4 x .250 x 24’ Bronze 4.500 19-IV-2500 4 x .250 x 24’ Ivory 4.500 19-BG-2500 4 x .250 x 24’ Beige 4.500 19-WH-2501 4 x .250 x 24’ 6” White 4.500 Bertha™ Painted Aluminum Rectangular Tube Size in Inches Approx. Stock Code ( E x M x S color)Wt/Lin ft. 20-COLOR-803 4 x 6 x .125 x 24’ ** 2.925 20-COLOR-805 4 x 6 x .250 x 20’ ** 5.700 **COLOR - Available in: White (WH), Bronze (MB), Ivory (IV), Beige (BG) Touch Up Spray Paint 16 ounce cans Stock Code Color 35-00-100 White 35-00-100G White Gloss 35-00-105 Bronze 35-00-105G Bronze Gloss 35-00-110 Ivory Gloss 35-00-115 (TX)Beige 35-00-115G Beige Gloss 35-00-120 Black 35-00-120G Black Gloss PAINTED TUBING FOR ROLL SHUTTERS Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 01/24/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 23 Copyright 2007-2020 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. 40MM NON END RETENTION ROLL SHUTTER SYSTEM - Code Approvals 40mm: FBC (non-HVHZ), FBC (HVHZ), IBC/IRC 40 MM SLAT x 20’ (vented) 40-WH-275T 40-IV-275T - CLOSEOUT 40-MB-275T - CLOSEOUT 40-BG-275T - CLOSEOUT 10 Pcs 40mm Non-ER SLAT LOCK 40-63-796 Left & Right (2 Bags of 100 each) Black BOTTOM SLAT x 22’ 41-WH-001 White 41-MB-001 (TX) White 10 Pcs 40 MM TRACK x 20’ 40-WH-002 40-IV-002 - CLOSEOUT 40-MB-002 - CLOSEOUT 40-BG-002 - CLOSEOUT 6 Pcs MISCELLANEOUS ROLL SHUTTER EXTRUSIONS BERTHA™ GLADIATOR SCREEN 3-1/4” Side Rail x 24’ 5” 41-WH-705 White 41-IV-705 Ivory 41-MB-705 Bronze 41-BG-705 Beige BERTHA™ GLADIATOR SCREEN Rail Cap x 24’ 41-WH-703 White 41-IV-703 Ivory 41-MB-703 Bronze 41-BG-703 Beige DADE 55 MM TRACK x 24’6” 41-COLOR-300 Available in White (WH), Ivory (IV), Bronze (MB) and Beige (BG) 6 Pcs Felt: 41-HV-160 2” STORM BAR CLIP 6063-T6 Mill Finish x 2” TB-CLIP (with holes) x 12’ 40-63-262 Receives 2” Square Tube; Also used as support brace bracket 2” Piece with Holes Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 08/18/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 24 Copyright 2007-2010 Eastern Metal Supply, Inc. HVTM, BERTHA HV®, BERTHA®, DACROSHIELD® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. 100mm Reel Tube x 20’ 18-61-255 3.548 ID (3-1/2”) SCH 40 BERTHA™ Reel Sleeve 41-63-352 Mill Finish x 20’ 2” Donut SPECIAL ORDER 41-63-3522 Mill Finish In-Line Galvanized Steel Reel Tube 4” (95.5MM ID) 4” O.D.; 120 Wall 41-GLV-240 x 20’ 41-GLV-288 x 24’ ROLL SHUTTER SYSTEMS - Miscellaneous Reel Tubes BERTHA™Reel Tube Sleeve 41-63-353 Mill Finish x 20’ 41-63-354 Mill Finish x 27’ 2” Donut SPECIAL ORDER 41-63-3533 Mill Finish 60mm Reel Tube x 17’ 51-63-338 2.365 ID Mill Finish Storm Bars x 22’ 6” (Dove Tail Tubes) 40-WH-902 White (8 Pcs.) 58 mm Octagonal Tube x 24’ 40-63-250 Mill Finish 70mm Heavy Reel Tube x 24’ 1” 52-63-7521 Wall: 0.168 70mm HD Reel Tube x 21’ 1” 41-63-349 Wall: 0.215 94mm Reel Tube 3.701 ID 41-63-350 x 24’ 41-63-11905 x 31’ Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 06/12/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 25 Typical Roll Shutter Hood* Assembly Override Motor Standard Motor * Various Hood sizes, styles & colors listed on Hurricane p34 Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 11/05/13 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 26 Plastic Gear 6A23811PF7 11:1 Ratio 7MM Hex 66 lbs. max 6A23808PF7 8:1 Ratio 7MM Hex 44 lbs. max Metal/ZAMAC Gear 6A23811ZF7 11:1 Ratio 7mm Hex 66 lbs.max 6A23808ZF7 8:1 Ratio 7MM Hex 44 lbs.max ROLL SHUTTER COMPONENTS: Gears ROLL SHUTTER COMPONENTS: Assist Springs All Assist Springs Utilize Plate 6A39438 Assist Spring 60mm Assist Spring 70mm 33 lb (15KG)7014-004 66 lb (30 kg)2002372 44 lb (20KG)2002369 99 lb (45 kg)7014-027 53 lb (24KG)7014-005 132 lb (60 KG)6C0450140G4 75 lb (34 KG)6C0445160G2 165 lb (75 kg)7014-010 137 lb (62KG)7014-023 220 lb (100 KG)2005355 ROLL SHUTTER COMPONENTS: Assist Springs 1424 Simu Gear 2002147 11:1 7mm Hex/16mmm square Use with Bracket 2003639 56 lbs. max 1424 Simu Gear Connector 2002392 Mates with Gears Simu 1424 Gear Plate 2003639 includes mounting screws Mates with 2002146 Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 10/08/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 27 CRANK EXTENSION KIT CRANK-KIT Includes one of each of the following: Crank handle extension (1/2" tube) 2004173; SS handle for extension (needs pin 2003341) 2004166; Bell for extension (needs pin 2005400) 2001776; Roll Pin for Bell 2005400; Roll Pin for Handle 2003341 Crank Handle Extension 2004173 1/2" Tube x 10’ Mates with 2004166; needs pin 2005400 SS Handle for Extension Mates with 2004173; Needs pin 2003341 2004166 Bell for Extension 2001776 Needs pin 2005400; Mates with Bullet for Crank Rod/Handle Roll Pins Mates with Bell and Crank Handle Extension 2005400 for Bell 2003341 for Handle Mates with SS Handle 2004166 5' Crank Handle w/Bell (Nickel) 6A322E78215 90° Universal 2 hole (exterior mount) includes screw for bullet (bullet sold separately) Hex Drive 6A323S584E7 Square Drive 2004121 90° Universal 4 hole (interior mount) includes screw for bullet (bullet sold separately) Hex Drive 6A323T584E7 Square Drive 2004125 Bullet for Universal (pivot) 6A32341FX Screw comes with Universal; Mates with Bell for removeable crank handle Universal Hex Coupler 9685120 for Extension Shaft Mates with Hex Ext. Shaft for Universals ROLL SHUTTER COMPONENTS: Universals & Handcranks Universal Hex Extension Shaft x 13” 9420659 Mates with Hex Coupler for Universals Handle Lock Wall Clip (plastic) 2005402 5' Assembled Awning Handle & Hook 2001892 T8-9 OVERRIDE EYE & SHAFT 9340020 Not for use with 2008302 or 2008303 90° Universal 2 hole (exterior mount) For 7” End Caps or Less Comes with Bullet Hex Drive 2001783 Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 02/01/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 28 Idle Side Adjustable Pivot (metal) 6C66643AL 60mm 6C66645AL 70mm Idle Side Adjustable Pivot (plastic) 6C66643 60mm 6C66645 70mm Bearing End Cap (bearing not included) 2003504 60mm 2003505 70mm 60mm Nylon Gear Insert 6D66603 Aluminum Gear Insert (metal) 6C66603AL 60mm 6C66605AL 70mm Double Adjustable Cap 6A66743 60 mm 2225467 70 mm 60mm Adjustable Articulated Cap 6A66753 CLOSEOUT 60mm Cap with Round Pivot (plastic) 6D66633 Aluminum Cap w/Round Pivot (metal) 6D66633AL 60mm 6D66635AL 70mm SIMU Idler Cap (use plate 2003638) 2003592 60mm 2003560 70mm Octagonal Adapter Ring for Round Tube 2006280 60mm 2003501 70mm ROLL SHUTTER COMPONENTS: Caps, Pivots and Adapter Rings Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 10/08/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 29 42 mm Ball Bearing Steel Bushing 6C35802 Bearing Plate (100mm x 100mm) 6A39431 includes mounting screws Heavy Duty Bearing Plate (100mm x 100mm) 7006107 includes mounting screws Plate for Gear (100mm x 100mm) 6A39436 includes mounting screws Universal Plate for Gear - no pin (100mm x 100mm) 6A39441 includes mounting screws Simu 1424 Gear Plate (for # 2002146) 2003639 includes mounting screws SIMU Spring Support Plate (100mm x 100mm) 2003638 w/retainer clip includes mounting screws Spring Support Plate (100mm x 100mm) 6A39438 w/retainer screw & nut includes mounting screws Screws for ALL Plates 2005563 (Cheese head/4 per plate) ROLL SHUTTER COMPONENTS: Bearings and Plates; Plugs, Stops, Entry Guides, Slat Hangers, Slat Locks Hood Roller 40 x 95 x 30mm 2001826 10 mm - 3/8” Track Plugs 701277 White Fits 3/8” drill hole 5/8" Track Plugs Fits 5/8” drill hole 58NPWH White 58NPIV Ivory 58NPBG Beige 58NPMB Bronze Conical Stop (screw included) 6D3332320 White (shown) 2006136 Ivory 2006320 Beige 2003493 Bronze Entry Guide NON END RETENTION 6D8642020 White (by the pair - for 40mm) Entry Guide 2005490 White (by the pair) Modify for 58mm ER 40mm Slat Lock Guide 40-63-796 Sold as a Set 40mm Slat Hanger 6A33713FX 58mm End Retention Slat Lock Guide 40-63-799 Sold as a Set 58mm Slat Lock Guide NON RETENTION 40-63-798 Sold as a Set Slat Hanger 6A33619FX for 55mm, 58mm, 60mm Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 10/09/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 30 7” SMALL LEG EMS Brand HD 45° End Caps (sold by the pair) Hood Cut Size Deduction: 0.4375” or 7/16” 2007 Silver 2007MB Bronze 2007WH White 2007BG Beige 2007IV Ivory Associated Hoods (see Hurricane 33): 120-COLOR-7FL45HD (Front Lip) 120-COLOR-7FN45HD (Front No Lip) 120-COLOR-7BHD (Back) 8” SMALL LEG EMS Brand HD 45° End Caps (sold by the pair) Hood Cut Size Deduction: 0.531” or 17/32” 2008 Silver 2008MB Bronze 2008WH White 2008BG Beige 2008IV Ivory Associated Hoods (see Hurricane 33): 120-COLOR-8FL45HD (Front Lip) 120-COLOR-8FN45HD (Front No Lip) 120-COLOR-8BHD (Back) 8” LARGE LEG EMS Brand HD 45° End Caps (sold by the pair) • Hood Cut Size Deduction: 0.531” or 17/32” • 40mm ER 8” Large Leg Slat Deduction: 5.8125” • 55mm ER 8” Large Leg Slat Deduction: 5.5625” • 58mm ER 8” Large Leg Slat Deduction: 5.5625” 20081 Silver 20081MB Bronze 20081WH White 20081BG Beige 20081IV Ivory Associated Hoods (see Hurricane 33): 120-COLOR-8FL45LLHD (Front Lip) 120-COLOR-8FN45LLHD (Front No Lip) 120-COLOR-8BHD (Back) 10” LARGE LEG EMS Brand HD 45° End Caps ( sold by the pair) • Hood Cut Size Deduction: 0.531” or 17/32” • 40mm ER 10” Large Leg Slat Deduction: 5.8125” • 55mm ER 10” Large Leg Slat Deduction: 5.5625” • 58mm ER 10” Large Leg Slat Deduction: 5.5625” 20091 Silver 20091MB Bronze 20091WH White 20091BG Beige 20091IV Ivory Associated Hoods (see Hurricane 33): 120-COLOR-10FL45LLHD (Front Lip) 120-COLOR-10FN45LLHD (Front No Lip) 120-COLOR-10BHD (Back) ROLL SHUTTER COMPONENTS: EMS Heavy Duty End Caps Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 01/06/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 31 ROLL SHUTTER COMPONENTS: End Caps 45° End Caps: SMALL LEG (sold by the pair) Colors Available: White: W • Bronze: MB • Ivory: IV • Beige: BG • Mill Finish/Silver (no sufffix) 5" End Cap 125 mm-powder 2006315COLOR 5.5" End Cap 137 mm-powder 2002765COLOR 6" End Cap 150 mm-powder 2005472COLOR 6.5" End Cap 150 mm-powder 2005327COLOR 7" End Cap 180 mm-powder 6C81518M20COLOR 8" End Cap 205 mm-powder 6C81520M20COLOR 10" End Cap 250 mm-powder 2006459COLOR 45° End Caps: LARGE LEG (sold by the pair) Colors Available: White: W • Bronze: MB • Ivory: IV • Beige: BG • Mill Finish/Silver (no sufffix) 8" End Cap 205 mm-powder 7008-592COLOR 10" End Cap 250 mm-powder 6C8172520COLOR 12" End Cap 300 mm-powder 6C8173020COLOR 10" HD 250MM END CAP KIT 9018758 White 12" HD 300MM END CAP KIT 9018759 White 14” HD 360MM END CAP KIT 9018906 White End Cap Kits Include: left & right cap, wall bracket, safety plate, plate support and roller accessory kit 90° End Caps (sold by the pair) SMALL LEG ONLY Mill Finish Only 7" End Cap 2002721 Mill Finish 8" End Cap 2002731 Mill Finish 10" End Cap 2002741 Mill Finish Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 01/31/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 SAFETY PLATES (sold by the pair) 180-45 hole 72 (7") use with 60mm 7008-549 205-45 hole 72 (8") use with 60mm 7008-551 205-45 hole 92 (8") use with 70mm 7008-457 250-45 hole 92 (10") use with 70mm 7008-245 300-45 hole 92 (12") use with 70mm 7008-247 ROLL SHUTTER COMPONENTS: Safety Plates HURRICANE 32 7” 45° HOOD WITH LIP 45° HOODS - SMALL LEG End Cap Colors Available: White: WH • Bronze: MB • Ivory: IV • Beige: BG Product Code Description Style 120-COLOR-5FL45 5" HOOD 45° Front with Lip 120-COLOR-5FN45 5" HOOD 45° Front (No Lip) 120-COLOR-5B 5" HOOD Back 120-COLOR-5.5FL45 5.5" HOOD 45° Front with Lip 120-COLOR-5.5FN45 5.5" HOOD 45° Front (No Lip) 120-COLOR-5.5B 5.5" HOOD Back 120-COLOR-6FL45 6" HOOD 45° Front with Lip 120-COLOR-6FN45 6" HOOD 45° Front (No Lip) 120-COLOR-6B 6" HOOD Back 120-COLOR-6.5FL45 6.5" HOOD 45° Front with Lip 120-COLOR-6.5FN45 6.5" HOOD 45° Front (No Lip) 120-COLOR-6.5B 6.5" HOOD Back 120-COLOR-7FL45 7" HOOD 45° Front with Lip 120-COLOR-7FN45 7" HOOD 45° Front (No Lip) 120-COLOR-7B 7" HOOD Back 120-COLOR-8FL45 8" HOOD 45° Front with Lip 120-COLOR-8FN45 8" HOOD 45° Front (No Lip) 120-COLOR-8B 8" HOOD Back 45° HOODS – LARGE LEG End Cap Colors Available: White: WH • Bronze: MB • Ivory: IV • Beige: BG Product Code Description Style 120-COLOR-8FL45LL 8" HOOD 45° Front with Lip 120-COLOR-8FN45LL 8" HOOD 45° Front (No Lip) 120-COLOR-8B 8" HOOD Back 120-COLOR-10FL45 10" HOOD 45° Front with Lip 120-COLOR-10FN45 10" HOOD 45° Front (No Lip) 120-COLOR-10B 10" HOOD Back 120-COLOR-12FL45 12" HOOD 45° Front with Lip 120-COLOR-12FN45 12" HOOD 45° Front (No Lip) 120-COLOR-12B 12" HOOD Back 90° HOODS – SMALL LEG End Cap Colors Available: White: WH • Bronze: MB • Ivory: IV • Beige: BG Product Code Description Style 120-COLOR-7FLSQ9 7" HOOD 90° Front with Lip) 120-COLOR-7FNSQ9 7" HOOD 90° Front (No Lip) 120-COLOR-7B 7" HOOD Back 120-COLOR-8FLSQ 8" HOOD 90° Front with Lip 120-COLOR-8FNSQ 8" HOOD 90° Front (No Lip) 120-COLOR-8B 8" HOOD Back 120-COLOR-10FLSQ 10" HOOD 90° Front with Lip 120-COLOR-10FNSQ 10" HOOD 90° Front (No Lip) 120-COLOR-10B 10" HOOD Back 7” 45° HOOD WITHOUT LIP Hoods are produced to order; generally ready to ship in one week or less from FL. Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 01/31/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 33 ROLL SHUTTER COMPONENTS: Roll Shutter Hoods (Custom Sizes Available) EMS Brand Standard Motor Kit (TYPE 5) 349K (DM45S) 30Nm; 4 Wire 449K (DM45S) 50Nm; 4 Wire equiv. to 449SK Includes (Also Sold Separately): 60 & 70MM Crowns • 60 & 70mm Drives Bracket • Alt. Bracket EMS Brand Standard Motor Kit (TYPE 6) 510K (DM59S) 100Nm; 4 Wire equiv. to 510SK Includes (Also Sold Separately): 70MM Crown • 70mm Drive Bracket • Alt. Bracket EMS Brand Standard Override Motor Kit (TYPE 5) 323K (DM45S) 30Nm; 4 Wire 423K (DM45S) 50Nm; 4 Wire equiv. to 423SK Includes (Also Sold Separately): 60 & 70MM Crowns • 60 & 70mm Drives Bracket EMS Brand Standard Override Motor Kit (TYPE 6) 529K (DM59M) 100Nm; 4 Wire equiv. to 529SK Includes (Also Sold Separately): 70MM Crown • 70mm Drive Bracket • Alt. Bracket EMS Brand Override Motor Kit (TYPE 9) (NOT UL LISTED) 580K (DM92M) 300Nm; 4 Wire Includes (Also Sold Separately): 100MM Crown • 100mm Drive No Bracket - Direct Mount Override Crank Eye EMS Brand Motor Specification Chart - NOT compatible with SIMU motor products Rated Output Motor Rated Rated Rated Continuos Protection Max Limit Theoretical Model Torque Speed Length Voltage Freq.Power Current Run Time Degree Turns Lifting Capacity** Standard Motors 349K 30 Nm 13 rpm 21.5” 120V 60Hz 152W 1.51A 4min IP44 45 134lbs - 148 lbs 449K 50 Nm 13 rpm 21.5” 120V 60Hz 235W 2.2A 4min IP44 22 150lbs - 246 lbs 510K 100 Nm 11 rpm 32.75” 120V 60Hz 340W 2.94A 4min IP44 22 256lbs - 386lbs Standard w/Override Motor 323K 30 Nm 13 rpm 24” 120V 60Hz 152W 1.51A 4min IP44 45 134lbs - 148 lbs 423K 50 Nm 13 rpm 24” 120V 60Hz 235W 2.2A 4min IP44 22 150lbs - 246 lbs 529K 100 Nm 11 rpm 24.5” 120V 60Hz 340W 2.94A 4min IP44 22 256lbs - 386lbs Remote Motor 345K 30 Nm 13 rpm 27” 120V 60Hz 152W 1.51A 4min IP44 45 134lbs - 148 lbs 445K 50 Nm 13 rpm 27” 120V 60Hz 235W 2.2A 4min IP44 22 150lbs - 246 lbs 528K 100 Nm 11 rpm 30.5” 120V 60Hz 340W 2.94A 4min IP44 22 256lbs - 386lbs Remote w/Override Motor 346K 30 Nm 13 rpm 29.75” 120V 60Hz 152W 1.51A 4min IP44 45 134lbs - 148 lbs 446K 50 Nm 13 rpm 29.75” 120V 60Hz 235W 2.2A 4min IP44 22 150lbs - 246 lbs 527K 100 Nm 11 rpm 30.5” 120V 60Hz 340W 2.94A 4min IP44 22 256lbs - 386lbs Standard w/Override Motor 580K (NOT UL LISTED)300 Nm 11 rpm 23.75” 120V 60Hz 881W 8.17A 4min IP44 30 760lbs - 1015lbs ** Lifting Capacity decreases as the height increases. ROLL SHUTTER MOTORS: EMS Brand Standard & Override Motor Kits Use DC136 to make Remote Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 02/01/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 34 ROLL SHUTTER MOTORS: EMS Brand Remote Motor Kits EMS Brand Remote Motor Kit (TYPE 5) 345K (DM45R) 30Nm; 3 Wire 445K (DM45R) 50Nm; 3 Wire equiv. to 445SK Includes (Also Sold Serarately): 60 & 70MM Crowns • 60 & 70mm Drives Bracket • Alt. Bracket • Five Channel Emitter EMS Brand Remote Motor Kit (TYPE 6) 528K (DM59R) 100Nm; 3 Wire equiv. to 528SK Includes (Also Sold Serarately): 70MM Crown • 70mm Drive Bracket • Alt. Bracket • Five Channel Emitter EMS Brand Remote Override Motor Kit (TYPE 5) 346K (DM45R) 30Nm; 3 Wire 446K (DM45R) 50Nm; 3 Wire equiv. to 446SK Includes (Also Sold Serarately): 60 & 70MM Crowns • 60 & 70mm Drives Bracket • Five Channel Emitter EMS Brand Remote Override Motor Kit (TYPE 6) 527K (DM59R) 100Nm; 3 Wire equiv. to 527SK Includes (Also Sold Serarately): 70MM Crown • 70mm Drive Bracket • Alt. Bracket Five Channel Emitter ROLL SHUTTER MOTORS: EMS Brand Miscellaneous Electronics EMS Brand Solar Motor Kit - NEW! Remote Override (TYPE 5) S346KB (DM45R) 30Nm lifts up to 119 lbs S446KB (DM45R) 50Nm lifts up to 200 lbs Both used with DD1538HK (see below) Includes (Also Sold Serarately): 60 & 70MM Crowns 60 & 70mm Drives • Bracket • Five Channel Emitter DD1538HK Solar Panel Kit - NEW! WiFi Smart Hub DD7002B Handheld Emitter DC104 One Channel Handheld Emitter DC105 Five Channel DC512 Fifteen Channel Keychain Emitter DC61 One Channel Wallmounted Emitter DC559 15 Channel DC48 1 Channel Twenty Channel Wireless Receiver DC74 (Standard Motors) DC136 (for 580K) Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 10/14//20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 ROLL SHUTTER MOTORS: EMS Brand Remote Override Motor Kits HURRICANE 35 SIMU Standard Motor Kit (TYPE 5) 449SK (DM45S) 50Nm; 4 Wire equiv. to 449K Includes (Also Sold Separately): 60 & 70MM Crowns • 60 & 70mm Drives • Bracket • Alt. Bracket SIMU Standard Motor Kit (TYPE 6) 510SK (DM59S) 100Nm; 4 Wire equiv. to 510K Includes (Also Sold Separately): 70MM Crown • 70mm Drive • Bracket • Alt. Bracket SIMU Motor Specification Chart - NOT compatible with EMS motor products Rated Output Motor Rated Rated Rated Continuos Protection Max Limit Theoretical Model Torque Speed Length Voltage Freq.Power Current Run Time Degree Turns Lifting Capacity** Standard Motors 449SK 50 Nm 12 rpm 23.625" 120V 60Hz 210W 2.1A 5min IP44 28 224lbs-246lbs 510SK 100 Nm 14 rpm 27.125" 120V 60Hz 430W 3.8A 4min IP44 22 308lbs-448lbs Standard w/Override Motor 423SK 50 Nm 12 rpm 26" 120V 60Hz 210W 2.1A 5min IP44 28 224lbs-246lbs 529SK 100 Nm 14 rpm 26.25" 120V 60Hz 430W 3.8A 5min IP44 28 308lbs-448lbs Remote Motor 445SK 50 Nm 12 rpm 26.5" 120V 60Hz 250W 2.1A 5min IP44 28 224lbs-246lbs 528SK 100 Nm 14 rpm 28.75" 120V 60Hz 430W 3.8A 4min IP44 28 308lbs-448lbs Remote w/Override Motor 446SK 50 Nm 12 rpm 30.25" 120V 60Hz 250W 2.1A 5min IP44 28 224lbs-246lbs 527SK 100 Nm 14 rpm 33.75" 120V 60Hz 430W 3.8A 5min IP44 28 308lbs-448lbs ** Lifting Capacity decreases as the height increases. SIMU ROLL SHUTTER MOTORS: Standard & Override Motor Kits SIMU Standard Override Motor Kit (TYPE 5) 423SK (DM45S) 50Nm; 4 Wire equiv. to 423K Includes (Also Sold Separately): 60 & 70MM Crowns • 60 & 70mm Drives • Bracket SIMU Standard Override Motor Kit (TYPE 6) 529SK (DM59M) 100Nm; 4 Wire equiv. to 529K Includes (Also Sold Separately): 70MM Crown • 70mm Drive • Bracket Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 02/01/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 36 SIMU ROLL SHUTTER MOTORS: Remote Motor Kits SIMU Remote Motor Kit (TYPE 5) 445SK (DM45R) 50Nm; 3 Wire equiv. to 445K Includes (Also Sold Serarately): 60 & 70MM Crowns 60 & 70mm Drives • Bracket; Single Channel Emitter SIMU Remote Motor Kit (TYPE 6) 528SK (DM59R) 100Nm; 3 Wire equiv. to 528K Includes (Also Sold Serarately): 70MM Crown • 70mm Drive • Bracket Alt. Bracket; Single Channel Emitter SIMU ROLL SHUTTER MOTORS: Remote Override Motor Kits SIMU Remote Override Motor Kit (TYPE 5) 446SK (DM45R) 50Nm; 3 Wire equiv. to 446K Includes (Also Sold Serarately): 60 & 70MM Crowns 60 & 70mm Drives • Bracket; Single Channel Emitter SIMU Remote Override Motor Kit (TYPE 6) 527SK (DM59R) 100Nm; 3 Wire equiv. to 527K Includes (Also Sold Serarately): 70MM Crown • 70mm Drive • Bracket Single Channel Emitter Hz TRANSMITTER 2006138 White 1 Channel Handheld Hz TRANSMITTER 2006143 White 5 Channel Handheld Hz TRANSMITTER 1810813 White 1810606 Ivory 5 Channel Recessed Designer Hz TRANSMITTER 1810603 White 1810604 Ivory 1 Channel Recessed Designer Hz 2 CHANNEL KEYCHAIN TRANSMITTER 2005326 ref. 2008329 Device for Home Automation Somfy myLink App 1811264 White RELAY/ISOLATION CONTROL 1822135 (NON STOCK) For 2 Switches on 1 Motor EXTERNAL RADIO RECEIVER (Non Stock) 1810481 For IGC; Remote for Duals & Sync Kit 1810602 To Make STND. Motor Remote EXTERNAL SYNC. CONTROL For Dual Motors 1822159 Standard IGC 1822161 (Non Stock) GROUP RELAY SWITCH 2282074 (Non Stock) 2 Motors on 1 Master Switch 2282075 (Non Stock) 3 Motors on 1 Master Switch EXTERNAL HZ RECEIVER 2008191 Micro Motor 120V AC Hz RADIO EXTERNAL KEYPAD 2006029 Up to 2 Hz Motors ROLL SHUTTER MOTORS: Hz Radio Systems Accessories Hz TRANSMITTER 2007350 White 16 Channel Handheld Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 02/29/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 37 ROLL SHUTTER MOTORS: Miscellaneous Electronics ROLL SHUTTER MOTORS by SIMU: Standard Motors - Type 5 & 6 SIMU STANDARD MOTORS (TYPE 5) SPECIAL ORDER 535 - 2000648 35 Nm 540 - 2000652 40 Nm SIMU OVERRIDE MOTORS (TYPE 5) SPECIAL ORDER 530 - 2000774 30 Nm 535 - 2000771 35 Nm 540 - 2000775 40 Nm MOTOR BRACKETS 9520187 TYPE 5 Operator Bracket 100mm x 100mm square MOTOR BRACKETS DZ315K TYPE 5 & 6 DMI Override Operator Bracket ref. 9706034 SIMU STANDARD MOTORS (TYPE 6) SPECIAL ORDER 660 - 2000985 60 Nm 680 - 2000986 80 Nm MOTOR BRACKETS 9530018 TYPE 6 Operator Bracket 100mm x 100mm square Crowns, Drives & Brackets Sold Separately SIMU Motor Specifications - Single Motors (Non-Kits) Rated Output Tube Rated Rated Rated Continuos Protection Max Limit Theoretical Model Torque Speed Diameter Voltage Freq.Power Current Run Time Degree Turns Lifting Capacity** Standard Motors (TYPE 5) 535 - 2000648 35 Nm 18 rpm 47mm 120V 60 Hz 210W 2.1A 5 min IP44 28 143 lbs - 172 lbs 540 - 2000652 40 Nm 12 rpm 47mm 120V 60 Hz 210W 1.8A 5 min IP44 28 179 lbs - 195 lbs Standard w/Override Motors (TYPE 5) 530 - 2000774 30 Nm 12 rpm 47mm 120V 60 Hz 170W 1.5A 5 min IP44 28 134 lbs - 148 lbs 535 - 2000771 35 Nm 18 rpm 47mm 120V 60 Hz 250W 2.1A 5 min IP44 28 143 lbs - 172 lbs 540 - 2000775 40 Nm 12 rpm 47mm 120V 60 Hz 210W 1.8A 5 min IP44 28 179 lbs - 195 lbs Standard w/Override Motor 660 - 2000985 60 Nm 14 rpm 60mm 120V 60 Hz 285W 2.5A 4 min IP44 22 185 lbs - 268 lbs 680 - 2000986 80 Nm 14 rpm 60mm 120V 60 Hz 390W 3.4A 4 min IP44 22 246 lbs - 358 lbs Crowns, Drives & Brackets Sold Separately Crowns, Drives & Brackets Sold Separately MOTOR ADAPTORS (crown & drive) 9012814 TYPE 5 60mm Octagonal Set, Aluminum Drive Wheel MOTOR ADAPTORS (crown & drive) 9012812 TYPE 5 70mm Octagonal Set, Aluminum Drive Wheel MOTOR ADAPTORS (crown & drive) 9012815 TYPE 6 70mm Octagonal Set, Aluminum Drive Wheel MOTOR BRACKETS 9520049 TYPE 5 Operator Bracket 80mm x 80mm square Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 01/31/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 38 SIMU OVERRIDE MOTORS (TYPE 8) SPECIAL ORDER T8 - 2008302 200 Nm ROLL SHUTTER MOTORS by SIMU: Toggle Switches TOGGLE SWITCH Single Pole Maintained 2005520 Ivory 2005521 White TOGGLE SWITCH Single Pole Momentary 2005522 Ivory 2005523 White DESIGNER PADDLE SWITCHES Single Pole Maintained 2005553 Ivory 2005554 White DESIGNER PADDLE SWITCHES Single Pole Momentary 2005558 Ivory 2005559 White KEY SWITCHES 2001547 Maintain 2001548 Momentary 2005752 * Extra Key Blanks *Non Stock Item TEST SWITCH 2001476 Installation Test switch SIMU SLIM OVERRIDE MOTOR (TYPE 8) SPECIAL ORDER T8 - 2008303 280 Nm ROLL SHUTTER MOTORS by SIMU: Standard Motors - Type 8 Drives & Brackets Sold Separately Drives & Brackets Sold Separately To make Remote Use 1810602 9001297 Drive 9018069 Bracket To make Remote Use Smart Motor Control 2005720 and IGC Control 1810481 9001297 Drive 9018069 Bracket SIMU Motor Specifications - Single Motors (Non-Kits) Rated Output Tube Rated Rated Rated Continuos Protection Max Limit Theoretical Model Torque Speed Diameter Voltage Freq.Power Current Run Time Degree Turns Lifting Capacity** Standard w/Override Motor T8 - 2008302 200 Nm 10 rpm 94mm 120V 60 Hz 600W 5.6A 4min IP44 17 490 - 551 lbs T8 - 2008303 280 Nm 10 rpm 94mm 120V 60 Hz 820W 6.9A 4min IP44 17 686 - 771 lbs ** Lifting Capacity decreases as the height increases. MOTOR ADAPTORS (drive) 9001297 T8 94MM Round Drive Wheel T8 IDLER SUPPORT 2003807 94MM IDLE INSERT 9542008 MOTOR BRACKETS 9018069 T8 Bracket Angle (2 piece set) Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 02/01/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 39 REMOTE Hz (TYPE 5) SPECIAL ORDER 520 - 2006353 20 Nm 530 - 2005136 30 Nm (No Transmitter) 535 - 2005135 35 Nm REMOTE Hz OVERRIDE MOTORS (TYPE 5) SPECIAL ORDER 530 - 2004673*30 Nm (No Transmitter) 535 - 2004674 35 Nm Crowns, Drives & Brackets Sold Separately SIMU Motor Specifications - Single Motors (Non-Kits) Rated Output Tube Rated Rated Rated Continuos Protection Max Limit Theoretical Model Torque Speed Diameter Voltage Freq.Power Current Run Time Degree Turns Lifting Capacity** Remote Motor 520 - 2006353 35 Nm 12 rpm 47mm 120V 60 Hz 130W 1.1A 5 min IP44 28 82 lbs - 100 lbs 530 - 2005136 30 Nm 12 rpm 47mm 120V 60 Hz 170W 1.5A 5 min IP44 28 123 lbs - 148 lbs 535 - 2005135 35 Nm 18 rpm 47mm 120V 60 Hz 250W 2.1A 5 min IP44 28 143 lbs - 172 lbs Remote w/Override Motor 530 - 2004673 30 Nm 12 rpm 47mm 120V 60 Hz 170W 1.5A 5 min IP44 28 123 lbs - 148 lbs 535 - 2004674 35 Nm 18 rpm 47mm 120V 60 Hz 250W 2.1A 5 min IP44 28 143 lbs - 172 lbs ** Lifting Capacity decreases as the height increases ROLL SHUTTER MOTORS by SIMU: Remote Hz Motors - Type 5 Crowns, Drives & Brackets Sold Separately ROLL SHUTTER MOTORS: Hz Radio Systems Accessories MOTOR ADAPTORS (crown & drive) 9012814 TYPE 5 60mm Octagonal Set, Aluminum Drive Wheel MOTOR ADAPTORS (crown & drive) 9012812 TYPE 5 70mm Octagonal Set, Aluminum Drive Wheel MOTOR BRACKETS 9520049 TYPE 5 Operator Bracket 80mm x 80mm square MOTOR BRACKETS 9520187 TYPE 5 Operator Bracket 100mm x 100mm square MOTOR BRACKETS DZ315K TYPE 5 DMI Override Operator Bracket ref. 9706034 Hz TRANSMITTER 2006138 White 1 Channel Handheld Hz TRANSMITTER 2006143 White 5 Channel Handheld Hz TRANSMITTER 1810813 White 1810606 Ivory 5 Channel Recessed Designer Hz TRANSMITTER 1810603 White 1810604 Ivory 1 Channel Recessed Designer Hz 2 CHANNEL KEYCHAIN TRANSMITTER 2005326 ref. 2008329 Device for Home Automation Somfy myLink App 1811264 White RELAY/ISOLATION CONTROL 1822135 (NON STOCK) For 2 Switches on 1 Motor EXTERNAL RADIO RECEIVER (Non Stock) 1810481 For IGC; Remote for Duals & Sync Kit 1810602 To Make STND. Motor Remote EXTERNAL SYNC. CONTROL For Dual Motors 1822159 Standard IGC 1822161 (Non Stock) GROUP RELAY SWITCH 2282074 (Non Stock) 2 Motors on 1 Master Switch 2282075 (Non Stock) 3 Motors on 1 Master Switch EXTERNAL HZ RECEIVER 2008191 Micro Motor 120V AC Hz RADIO EXTERNAL KEYPAD 2006029 Up to 2 Hz Motors Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 07/23/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 40 HIGH VISIBILITY™ BAHAMA/COLONIAL SYSTEM Code Approvals: FBC (non-HVHZ) visible finished blades height" 1 6-7/8 2 8-1/4 3 9-5/8 4 11 5 12-3/8 6 13-3/4 7 15-1/8 8 16-1/2 9 17-7/8 10 19-1/4 11 20-5/8 12 22 13 23-3/8 14 24-3/4 15 26-1/8 16 27-1/2 17 28-7/8 visible finished blades height" 18 30-1/4 19 31-5/8 20 33 21 34-3/8 22 35-3/4 23 37-1/8 24 38-1/2 25 39-7/8 26 41-1/4 27 42-5/8 28 44 29 45-3/8 30 46-3/4 31 48-1/8 32 49-1/2 33 50-7/8 34 52-1/4 visible finished blades height" 35 53-5/8 36 55 37 56-3/8 38 57-3/4 39 59-1/8 40 60-1/2 41 61-7/8 42 63-1/4 43 64-5/8 44 66 45 67-3/8 46 68-3/4 47 70-1/8 48 71-1/2 49 72-7/8 50 74-1/4 51 75-5/8 visible finished blades height" 52 77 53 78-3/8 54 79-3/4 55 81-1/8 56 82-1/2 57 83-7/8 58 85-1/4 59 86-5/8 60 88 61 89-3/8 62 90-3/4 63 92-1/8 64 93-1/2 65 94-7/8 66 96-1/4 67 97-5/8 68 99 visible finished blades height" 69 100-3/8 70 101-3/4 71 103-1/8 72 104-1/2 73 105-7/8 74 107-1/4 75 108-5/8 76 110 77 111-3/8 78 112-3/4 79 114-1/8 80 115-1/2 81 116-7/8 82 118-1/4 83 119-5/8 84 121 85 122-3/8 High Visibility Bahama Colonial coverage chart - Additional heights available upon request. Bahama/Colonial Hollow Blade x 16’ Mill Finish 80-MF-013 uses #14 screw Bahama Decorative Blade x 16’ Mill Finish 41-63-830 (Non-Impact) Colonial Decorative Blade x 16’ Mill Finish 41-63-835 (Non-Impact) 2-1/8” Bahama/Colonial Air Foil Blade x 16’ Mill Finish 56-63-200 uses #14 screw HV™ Bahama/Colonial Horizontal Frame x 20’ 41-63-819 Mill Finish 2.33 x 2 HV™ Bahama/Colonial Center Mullion x 12’ Mill Finish Punched 41-63-818P 2” Blade (shown) 41-63-818PA 2-1/8” Airfoil HV™ Bahama Horizontal Frame x 20’ 41-63-826 Mill Finish 2.33 x 2 HV™ Bahama/Colonial Side Frame x 20’ 7” Mill Finish 41-63-823L (Punched-Left) 41-63-823R (Punched-Right) 2.33 x 2” HV™ Bahama/Colonial Air Foil Side Frame x 20’ 7” SPECIAL ORDER (Mill Finish) Accepts 2-1/8” Airfoil Blade 56-63-200 41-63-823LA (Punched-Left) 41-63-823RA (Punched-Right) HV™ Colonial Wood Hinge 2” 41-63-843 Wall Mount 1 pc Mill Finish HV™ Colonial Concrete Hinge 2” 41-63-844 Wall Mount 1 pc Mill Finish HV™ Colonial Flat Hinge 2” 41-63-845 Wall Mount 1 pc Mill Finish HV™ Colonial Storm Bar Clip 41-63-840 Mill Finish 41-63-840WH White 41-63-840BK Black 41-63-840MB Bronze Shutter Mount 1pc High Visibilty 2” Blade Typical Angularity & Spacing Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 03/17/21 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 41 visible finished blades height" 86 123-3/4 87 125-1/8 88 126-1/2 89 127-7/8 90 129-1/4 91 130-5/8 92 132 93 133-3/8 94 134-3/4 95 136-1/8 96 137-1/2 97 138-7/8 98 140-1/4 Bahama/Colonial Screen Frame x 12’ Mill Finish 41-63-859 with Spline Groove 18/14 Charcoal Screen 100’ Rolls 200-CC-025 36" 200-CC-024 60" 200-CC-026 72" 200-CC-027 78" 200-CC-028 84" 200-CC-034 90" 200-CC-029 96" 200-CC-023 102" 200-CC-030 108" HIGH VISIBILITY™ BAHAMA/COLONIAL SYSTEM Code Approvals: FBC (non-HVHZ) Bahama Female Flat Hinge x 20’ 41-63-805 Mill Finish 6 pcs Ceiling Mount 1 x 2 x 1/8 Storm Bar x 24’ 20-63-225 Mill Finish 20-WH-231 White 20-MB-231 Bronze 20-IV-231 Ivory 20-BG-231 Beige 1 x 3 x 1/8 Storm Bar x 24’ 20-63-230 Mill Finish 20-WH-230 White 20-IV-230 Ivory 20-BG-230 Beige HV™ Bahama Hold Down Bracket 4” CONCRETE Wall Mount Storm Bar Clips 1 pc 41-63-842 Mill Finish 41-63-842WH White 41-63-842BK Black 41-63-842MB Bronze HV™ Female Bahama Hinge x 20’ 41-63-836 Mill Finish 1 x 3 x 1/8 x 24’ Radius Corner Stock Also Available: 20-63-689 (NC/TX) Mill Finish Colonial Single Hinge x 12’ Mill Finish 6 pcs 41-63-816 Wall Mount Mates with 41-63-824N Colonial Double Hinge x 12’ Mill Finish 4 pcs; Wall Mount 41-63-813 Mates with 41-63-824N 2.25 Colonial Double Hinge x 12’ Mill Finish 4 pcs; Wall Mount 52-61-4146 Mates with 41-63-824N Telescoping Serrated Tube x 20’ Mill Finish 52-63-537 .875” 26 pcs 51-63-381 1.000” 32 pcs Colonial Flat Hinge x 12’ Wall Mount Mill Finish 6 pcs 41-63-811 Mates with 41-63-824N Colonial Flat Hinge x 12’ Shutter Mount Mill Finish 6 pcs 41-63-824N Mates with 41-63-816, 41- 63-813, 41-63-811, 41-63- 824N HV™ Bahama Hold Down Bracket 4” WOOD Wall Mount Storm Bar Clips Set: 1 pc right & 1 pc left 41-63-841 Mill Finish 41-63-841WH White 41-63-841BK Black 41-63-841MB Bronze 1” SLIP COLLAR WITH THUMB SCREW Accepts 1” Serrated Tube for Telescoping Arms 7000 (FL/TX)Mill Finish x 9/16” 7000WH White x 9/16” 7000BK Black x 9/16” 7000MB Bronze x 9/16” 52-00-139 (TX) Mill Finish x 9/16” (No Thumbscrew) MILL ORDER 52-63-2484 Mill Finish x 20’ (No Thumbscrew) 41014 (TX)1/4-20 x 3/4 Thumbscrew (mates with 52-00-139) 41021 (TX)1/4-20 x 1 Thumbscrew (mates with 52-00-139) CAMEL BACK CLIP WITH PIN 7001 Mill Finish 7001WH White 7001BK Black 7001MB Bronze Copyright 2007-2020 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. HV™ Bahama Telescoping Arm Kit Kit includes 2 Tubes, Slip Collar, Camel Back, Cap and U-Clip. (Approximate Max Extended Length shown in parenthesis) Code Arm Size (Extended) Finish Code Arm Size (Extended) Finish 7002K 12” (23”) MF 7017K 30” (59”) MF 7002KWH 12” (23”) White 7017KWH 30” (59”) White 7002KBK 12” (23”) Black 7017KBK 30” (59”) Black 7002KMB 12” (23”) Bronze 7017KMB 30” (59”) Bronze 7003K 18” (35”) MF 7018K 36” (71”) MF 7003KWH 18” (35”) White 7018KWH 36” (71”) White 7003KBK 18” (35”) Black 7018KBK 36” (71”) Black 7003KMB 18” (35”) Bronze 7018KMB 36” (71”) Bronze 7004K 24” (47”) MF 7004KWH 24” (47”) White 7004KBK (FL/TX) 24” (47”) Black 7004KMB 24” (47”) Bronze Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 11/19/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 42 HV™ Board & Batten 5" Radius Tube x 24' 40-63-723 6063 T6 M/F HV™ Board & Batten Snap Cap x 12' 40-63-720 6063 T6 M/F HV™ Board & Batten End Cap - Flat Bar 40-63-726 3/4 x 3 x .062' (with holes) - 6063 T52 M/F HV™ Board & Batten 4" Radius Tube x 24' 40-63-724 6063 T6 M/F HV™ Board & Batten Snap Channel x 12' 40-63-721 6063 T6 M/F HV™ Board & Batten 3" Radius Tube x 24' 40-63-722 6063 T6 M/F 2” Concrete Hinge 41-63-847 1pc 6063 T6 M/F 2” Wood Hinge 41-63-848 1pc 6063 T6 M/F 2” Flat Hinge 41-63-846 (4 Holes) 41-63-849 (5.99 x 2 Holes) 1pc 6063 T6 M/F 3” Decorative Slat x 24’ Board & Batten 8736-001 (TX) Mill Finish 4” Decorative Slat x 24’ Board & Batten 8736-002 (TX) Mill Finish Non-Rated Non-Rated 3.5” Tongue & Groove Slat x 24’ 40-63-727 6063 T6 M/F Tongue & Groove End Slat x 24’ 40-63-728 6063 T6 M/F HV™ BOARD & BATTEN COLONIAL SYSTEM Code Approvals: FBC (non-HVHZ) Board Cover Cap - Architechtural Angle x 20’ 11-63-220 1 x 1 x 1/16 End Cap - Architechtural Channel x 20’ 13-63-230 1-1/4 x 1-1/4 x 1/8 Non-Rated Non-Rated 2” Bi-Fold Hinge 41-63-844 1pc 6063 T6 M/F Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 03/25/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 43 Colonial/Bahama Frame x 20’ 41-63-806 Mill Finish 8 pcs Hinged Bahama Top Frame x 20’ 41-63-807 Mill Finish 4 pcs Bahama Snap Cap x 20’ 41-63-808 Mill Finish 20 pcs Standard Center Mullion x 20’ 41-63-809 Mill Finish 3 pcs Copyright 2007-2016 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA®, DACROSHIELD® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. Colonial/Bahama Blade x 12’6” 41-63-799N M/F (Non-Vented) 41-63-800N M/F (Vented) Both mate with 41-1/2-799N 6 pcs Colonial/Bahama Top Half Blade x 12’6” 41-1/2-799N Mill Finish Mates with 41-63-799N and 41-63-800N Female Bahama Hinge x 20’ 41-63-803 Mill Finish 3.311 Female Bahama Hinge x 20’ 41-63-804 Mill Finish Colonial Frame x 20’ 41-63-802 Mill Finish 6 pcs HV™ Bahama Telescoping Arm Kit Kit includes 2 Tubes, Slip Collar, Camel Back, Cap and U-Clip. (Approximate Max Extended Length shown in parenthesis) Code Arm Size (Extended) Finish 7002K 12” (23”) MF 7002KWH 12” (23”) White 7002KBK 12” (23”) Black 7002KMB 12” (23”) Bronze 7003K 18” (35”) MF 7003KWH 18” (35”) White 7003KBK 18” (35”) Black 7003KMB 18” (35”) Bronze 7004K 24” (47”) MF 7004KWH 24” (47”) White 7004KBK (FL/TX)24” (47”) Black 7004KMB 24” (47”) Bronze 7017K 30” (59”) MF 7017KWH 30” (59”) White 7017KBK 30” (59”) Black 7017KMB 30” (59”) Bronze 7018K 36” (71”) MF 7018KWH 36” (71”) White 7018KBK 36” (71”) Black 7018KMB 36” (71”) Bronze Copyright 2007-2020 Eastern Metal Supply, Inc. HV™, BERTHA HV®, BERTHA® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved. Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 11/19/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 44 BERTHA™ IMPACT RATED EXTRUDED BAHAMA/COLONIAL SYSTEM Code Approvals: FBC (non-HVHZ), FBC (HVHZ) 1.46 x 2.25 Brickhouse Low Profile Side Rail x 20' Mill Finish 20-63-805L (TX) Left Side Punched 20-63-805R (TX) Right Side Punched Left Side Right Side 1.46 x 2.25 Brickhouse Low Profile Center Mullion x 20’ 20-63-805M (TX)Mill Finish Both Sides Punched Brickhouse Low Profile Top/Bottom Rail 41-63-839 (TX)x 20’ Mill Finish 41-63-832 x 20’ 3” Mill Finish Brickhouse Low Profile Blade x 16’ 80-MF-013 Mill Finish Brickhouse Low Profile Colonial Flat Hinge x 12’ 41-63-824 (TX)Mill Finish For Bi-Fold Application Colonial Flat Hinge x 12’ 41-63-824N Shutter to House Mount Mill Finish Mates with 41-63-813, 41-63-824N Brickhouse Low Profile 4” New Orleans Style Center Mullion x 21’ MILL ORDER 41-63-863 For Non-Impact Decorative Applications Only Brickhouse Low Profile Colonial Storm Bar x 24’ 1 x 2 x 1/8 Rect Bar x 24’ 20-63-225 Mill Finish 20-WH-231 White 20-MB-231 Bronze 20-IV-231 Ivory 20-BG-231 Beige HV™ Colonial Storm Bar Clip 1pc/Shutter Mount 41-63-840 Mill Finish 41-63-840WH White 41-63-840BK Black 41-63-840MB Bronze Brickhouse Low Profile Bahama Top Rail w/Hinge x 20’ 41-63-849 (TX)Mill Finish Colonial Double Hinge x 12’ Mill Finish 4 pcs; Wall Mount 41-63-813 Mates with 41-63-824N 2.25 Colonial Double Hinge x 12’ Mill Finish 4 pcs; Wall Mount 52-61-4146 Mates with 41-63-824N Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 06/13/18 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 45 BRICKHOUSE LOW PROFILE BAHAMA/COLONIAL SYSTEM visible finished blades height" 9 21 1/2 10 23 3/16 11 24 7/8 12 26 9/16 13 28 1/4 14 29 15/16 15 31 5/8 16 33 3/8 17 35 1/16 18 36 3/4 19 38 7/16 visible finished blades height" 20 40 1/8 21 41 13/16 22 43 1/2 23 45 3/16 24 46 7/8 25 48 9/16 26 50 1/4 27 51 15/16 28 53 5/8 29 55 5/16 30 57 visible finished blades height" 31 58 11/16 32 60 3/8 33 62 1/8 34 63 13/16 35 65 1/2 36 67 3/16 37 68 7/8 38 70 9/16 39 72 1/4 40 73 15/16 41 75 5/8 visible finished blades height" 42 77 5/16 43 79 44 80 11/16 45 82 3/8 46 84 1/16 47 85 3/4 48 87 7/16 49 89 1/8 50 90 13/16 51 92 9/16 52 94 1/4 visible finished blades height" 53 95 15/16 54 97 5/8 55 99 19/64 56 100 57 102 11/16 58 104 3/8 59 106 1/16 60 107 3/4 61 109 7/16 FEATURES & BENEFITS: • Colonial application tested to ASTM E 330, E 1886 & E 1996 Protocols and passed the Large Missile Impact Test as well as +/- 60 psf for both the Design and Static Load Testing. • Colonial application meets or exceeds standards for TDI (engineered drawings available). • Offers the appearance of a more decorative, thin-lined traditional shutter. • Increase LEED Rating of your “Green” Project • Cost effective for commercial applications • New pre-fabbed side rails & mullions eliminate need to mechanically fasten the blades, resulting in labor reduction of over 50% compared to traditional Colonial shutter assemblies • Easy & Fast mechanical frame fastening assembly resulting in a functional product • Provided in mill finish to allow the fabricator the flexibility to match colors to the building design after assembly • Upscale look providing a durable product for years to come with little maintenance TOP/BOTTOM RAIL RIGHT SIDE RAIL (punched) LEFT SIDE RAIL (punched) BLADES BRICKHOUSE LOW PROFILE BAHAMA/COLONIAL SYSTEM Brickhouse Low Profile Bahama Colonial coverage chart - Additional heights available upon request. Colonial Schematic (Bahama not shown) TOP/BOTTOM RAIL Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 09/19/14 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 46 Decorative Bahama Application (Exterior View) Decorative Engineering available upon request. All rivets & screws are commercially available. 41-63-803 HV Low Profile Z-Blade System Schematic 41-63-837N 41-63-861L or 41-63-861R 41-63-861L or 41-63-861R 41-63-860 41-63-831 41-63-860 41-63-838PZ 41-63-831 41-63-861L or 41-63-861R 41-63-861L or 41-63-861R HV Low Profile Colonial Schematics (Exterior Views)Note: For applications requiring code rated hurricane protection refer to EMS High Visibility Bahama/Colonial product. 41-63-803 41-63-837N 41-63-832L125 or 41-63-832R125 41-63-831 41-63-838P125 or 41-63-838P200 41-63-831 41-63-832L125 or 41-63-832R125 41-63-831 41-63-831 41-63-831 41-63-831 or 41-63-862 41-63-831 or 41-63-862 HV Low Profile Bahama Schematic (Exterior View) Decorative Colonial Application (Exterior View) 41-63-831 41-63-860 41-63-860 Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 05/16/14 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 47 HV LOW PROFILE DECORATIVE BAHAMA/COLONIAL SYSTEMS* *Currently available for decorative applications 2” Bahama/Colonial Hollow Blade x 16’ 80-MF-013 Mill Finish Uses #14 screw 2” LOW PROFILE DECORATIVE BAHAMA/COLONIAL SYSTEM* *Currently available for decorative applications visible total finished blades blades height" 4 6 11-3/4 5 7 13-9/16 6 8 15-3/8 7 9 17-3/16 8 10 19 9 11 20-13/16 10 12 22-5/8 11 13 24-7/16 12 14 26-1/4 13 15 28 14 16 29-13/16 15 17 31-5/8 16 18 33-7/16 visible total finished blades blades height" 17 19 35-1/4 18 20 37-1/16 19 21 38-7/8 20 22 40-11/16 21 23 42-1/2 22 24 44-5/16 23 25 46-1/8 24 26 47-15/16 25 27 49-3/4 26 28 51-9/16 27 29 53-3/8 28 30 55-3/16 29 31 57 2” Low Profile Bahama Colonial coverage chart Additional heights available upon request. Blades continue inside top & bottom channel. visible total finished blades blades height" 30 32 58-13/16 31 33 60-5/8 32 34 62-7/16 33 35 64-1/4 34 36 66-1/16 35 37 67-7/8 36 38 69-11/16 37 39 71-1/2 38 40 73-1/4 39 41 75-1/16 40 42 76-7/8 41 43 78-11/16 42 44 80-1/2 For Hinges & Components see Hurricane pp 53-54 visible total finished blades blades height" 43 45 82-5/16 44 46 84-1/8 45 47 85-15/16 46 48 87-3/4 47 49 89-9/16 48 50 91-3/8 49 51 93-3/16 50 52 95 51 53 96-13/16 52 54 98-5/8 2” Colonial Decorative Blade x 16’ (Non-Impact) 41-63-835 Mill Finish Low Profile Bahama Vertical Center Mullion x 20’ 3” 41-63-838 UNPUNCHED 41-63-838P200 PUNCHED* Mill Finish *Punched for 2” Blades Low Profile Horizontal Frame x 21’ 41-63-831 Mill Finish Can be used as Bottom Frame &Center Mullion; Colonial Top Frame LOW PROFILE MALE BAHAMA FRAME HINGE 41-63-837N x 20’ Mill Finish Low Profile Colonial Horizontal Rail x 16’ 2”Mill Finish 41-63-862 Horizontal Rail for Colonials Low Profile Side Frame x 20’ 3” 41-63-832 UNPUNCHED 41-63-832L200 PUNCHED Left* 41-63-832R200 PUNCHED Right* Mill Finish *Punched for 2” Blades 2” Bahama Decorative Blade x 16’ (Non-Impact) 41-63-830 Mill Finish Alternate New Orleans Style 4” Bottom Rail Colonial Applications MILL ORDER 41-63-863 BAHAMA FEMALE HINGE x 20’ 41-63-803 Mill Finish 6 pcs 1” BUILD-OUT BAHAMA FEMALE HINGE x 20’ 41-63-804 Mill Finish 6 pcs BAHAMA FEMALE FLAT HINGE x 20’ 41-63-805 Mill Finish 6 pcs Low Pofile 2” Blade Typical Angularity & Spacing Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 04/07/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 48 HV LOW PROFILE SIDE FRAME x 20’ 3” 41-63-832 UNPUNCHED 41-63-832L125 PUNCHED Left* 41-63-832R125 PUNCHED Right* Mill Finish *Punched for 1-1/4” Blades Low Profile Horizontal Frame x 21’ 41-63-831 Mill Finish Can be used as Bottom Frame &Center Mullion; Colonial Top Frame HV LOW PROFILE MALE BAHAMA HINGE 41-63-837N x 20’ Mill Finish HV LOW PROFILE COLONIAL HORIZONTAL RAIL x 16’ 2” 41-63-862 Mill Finish Horizontal Rail for Colonials visible total finished blades blades height" 18 22 20-3/8 19 23 21-1/4 20 24 22-1/8 21 25 23 22 26 23-7/8 23 27 24-13/16 24 28 25-11/16 25 29 26-9/16 26 30 27-7/16 27 31 28-5/16 28 32 29-3/16 29 33 30-1/16 visible total finished blades blades height" 30 34 30-15/16 31 35 31-13/16 32 36 32-3/4 33 37 33-5/8 34 38 34-1/2 35 39 35-3/8 36 40 36-1/4 37 41 37-1/8 38 42 38 39 43 38-7/8 40 44 39-3/4 41 45 40-11/16 1-1/4” Low Profile Bahama Colonial coverage chart Additional heights available upon request. Blades continue inside top & bottom channel. visible total finished blades blades height" 42 46 41-9/16 43 47 42-7/16 44 48 43-5/16 45 49 44-3/16 46 50 45-1/16 47 51 45-15/16 48 52 46-13/16 49 53 47-11/16 50 54 48-5/8 51 55 49-1/2 52 56 50-3/8 53 57 51-1/4 For Hinges & Components see Hurricane pp 53-54 visible total finished blades blades height" 54 58 52-1/8 55 59 53 56 60 53-7/8 57 61 54-3/4 58 62 55-5/8 59 63 56-9/16 60 64 57-7/16 61 65 58-5/16 62 66 59-3/16 63 67 60-1/16 1-1/4” HV LOW PROFILE BLADE x 12’ 41-63-834 Mill Finish Low Pofile 1-1/4” Blade Typical Angularity & Spacing HV LOW PROFILE BAHAMA VERTICAL CENTER MULLION x 20’ 3” 41-63-838 UNPUNCHED 41-63-838P125 PUNCHED* Mill Finish *Punched for 1-1/4” Blades Alternate New Orleans Style 4” Bottom Rail Colonial Applications MILL ORDER 41-63-863 BAHAMA FEMALE HINGE x 20’ 41-63-803 Mill Finish 6 pcs 1” BUILD-OUT BAHAMA FEMALE HINGE x 20’ 41-63-804 Mill Finish 6 pcs BAHAMA FEMALE FLAT HINGE x 20’ 41-63-805 Mill Finish 6 pcs Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 04/07/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 49 1-1/4” HV LOW PROFILE DECORATIVE BAHAMA/COLONIAL SYSTEM* *Currently available for decorative applications BAHAMA FEMALE HINGE x 20’ 41-63-803 Mill Finish 6 pcs 1” BUILD-OUT BAHAMA FEMALE HINGE x 20’ 41-63-804 Mill Finish 6 pcs BAHAMA FEMALE FLAT HINGE x 20’ 41-63-805 Mill Finish 6 pcs Alternate New Orleans Style 4” Bottom Rail Colonial Applications MILL ORDER 41-63-863 HV LOW PROFILE DECORATIVE BAHAMA/COLONIAL Z-BLADE SYSTEM* *Currently available for decorative applications HV LOW PROFILE Z-BLADE x 12’ 2” 52-63-060 Mill Finish for Z-Blade System HV LOW PROFILE VERTICAL FRAME WITH SNAP x 16’ 2” 41-63-860 Mill Finish Mates with 41-63-861R/L for Z-Blade System HV LOW PROFILE Z - SNAP PLATE x 16’ 2” Mill Finish Mates with 41-63-860 41-63-861R PUNCHED* Right 41-63-861L PUNCHED* Left *Punched to accept Z-Blade HV LOW PROFILE HORIZONTAL FRAME x 21’ 41-63-831 Mill Finish Can be used as Bottom Frame & Center Mullion; Colonial Top Frame HV LOW PROFILE COLONIAL HORIZONTAL RAIL x 16’ 2” 41-63-862 Mill Finish Horizontal Rail for Colonials HV LOW PROFILE BAHAMA VERTICAL CENTER MULLION x 20’ 3” 41-63-838 UNPUNCHED 41-63-838PZ PUNCHED* Mill Finish *Punched to accept Z-Blade HV LOW PROFILE MALE BAHAMA HINGE x 20’ 41-63-837N Mill Finish visible total finished blades blades height" 11 13 27-7/16 12 14 29-1/2 13 15 31-9/16 14 16 33-11/16 15 17 35-3/4 16 18 37-3/16 17 19 39-15/16 18 20 42 19 21 44-1/16 20 22 46-3/16 21 23 48-1/4 22 24 50-5/16 23 25 52-7/16 24 26 54-1/2 25 27 56-9/16 visible total finished blades blades height" 26 28 58-11/16 27 29 60-3/4 28 30 62-3/16 29 31 64-15/16 30 32 67 31 33 69-1/16 32 34 71-1/8 33 35 73-1/4 34 36 75-5/16 35 37 77-3/8 36 38 79-1/2 37 39 81-9/16 38 40 83-5/8 39 41 85-3/4 40 42 87-13/16 Low Profile Bahama Colonial Z-BLADE coverage chart Additional heights available upon request. Blades continue inside top & bottom channel. visible total finished blades blades height" 41 43 89-7/8 42 44 92 43 45 94-5/8 44 46 96-1/8 45 47 98-1/4 46 48 100-5/16 47 49 102-3/8 48 50 104-1/2 49 51 106-5/8 50 52 108-5/8 51 53 110-3/4 52 54 112-7/8 53 55 114-7/8 54 56 117 55 57 119-1/8 For Hinges & Components see Hurricane pp 53-54 visible total finished blades blades height" 56 58 121-1/8 57 59 123-1/4 58 60 125-3/8 59 61 127-3/8 60 62 129-1/2 61 63 131-5/8 62 64 133-5/8 63 65 135-3/4 64 66 137-3/4 65 67 139-7/8 66 68 142 67 69 144 Low Pofile Z-Blade Typical Angularity & Spacing Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 04/07/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 50 BAHAMA FEMALE HINGE x 20’ 41-63-803 Mill Finish 6 pcs 1” BUILD-OUT BAHAMA FEMALE HINGE x 20’ 41-63-804 Mill Finish 6 pcs BAHAMA FEMALE FLAT HINGE x 20’ 41-63-805 Mill Finish 6 pcs Bahama Top Frame with Hinge x 20’ Welded System 41-63-885 2” Bahama/Colonial Hollow Blade x 16’ Uses #14 screw Mill Finish 80-MF-013 2” Bahama Decorative Blade x 16’ Non-Impact Mill Finish 41-63-830 1.25 HV Low Profile Blade x 12’ 41-63-834 Mill Finish *Special Mill Order Frame Required - Call your Sales Representative for Coverage Chart WELDED Low Profile Bahama Colonial coverage chart Additional heights available upon request. Blades continue inside top & bottom channel. For Hinges & Components see Hurricane pp 53-54 Self Mating Colonial Inside Frame x 20’ 3” Welded System 41-63-880 UNPUNCHED 41-63-880R PUNCHED Right 41-63-880L PUNCHED Left Side & Bottom Frame x 20’ Welded System 41-63-883 UNPUNCHED 41-63-883R PUNCHED Right 41-63-883L PUNCHED Left Can also be used as a top frame in Colonial applications Center Mullion x 12’ Welded System 41-63-888 UNPUNCHED 41-63-888P PUNCHED HV LOW PROFILE COLONIAL HORIZONTAL RAIL x 16’ 2” 41-63-862 Mill Finish Horizontal Rail for Colonials visible total finished blades blades height" 11 24-7/16 12 26-1/4 13 28-1/16 14 29-7/8 15 31-11/16 16 33-1/2 17 35-5/16 18 37-1/8 19 38-15/16 20 40-3/4 visible total finished blades blades height" 21 42-9/16 22 44-3/8 23 46-3/16 24 48 25 49-13/16 26 51-5/8 27 53-7/16 28 55-1/4 29 57-1/16 30 58-7/8 visible total finished blades blades height" 31 60-11/16 32 62-1/2 33 64-5/16 34 66-1/8 35 67-15/16 36 69-3/4 37 71-9/16 38 73-3/8 39 75-3/16 40 77 Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 10/16/19 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 51 HV LOW PROFILE DECORATIVE BAHAMA/COLONIAL WELDED SYSTEM* *Currently available for decorative applications 2” 3-WAVE BLADE DECORATIVE BAHAMA/COLONIAL SYSTEM* *Currently available for decorative applications 2” 3-Wave Blade x 12’ 41-63-700 Self Mating Mill Finish 6063-T6 Side Rail with Lip x 20’ 41-63-701 Mill Finish 6063-T6 Accepts 3-Wave Blade Center Mullion x 12’ 41-63-888 Mill Finish Accepts 3-Wave Blade Center Mullion option not required in most applications.visible finished blades height" 1 6-11/16 2 12-9/16 3 18-7/16 4 24-5/16 5 30-3/16 6 36-1/16 7 41-15/16 8 47-13/16 9 53-11/16 10 59-9/16 visible finished blades height" 11 65-7/16 12 41-5/16 13 77-3/16 14 83-1/16 15 88-15/16 16 94-13/16 17 100-11/16 18 106-9/16 19 112-7/16 20 118-5/16 Coverage Chart Additional heights available upon request. Blades continue inside top & bottom channel. Top & Bottom Rail x 21’ 41-63-831 Mill Finish 6063-T6 HV LOW PROFILE MALE BAHAMA HINGE x 20’ 41-63-837N Mill Finish 12-3/8” Fixed Colonial Mounting Bracket 1.5 x 1.5 x .062 Angle (Pre-Drilled 3/16” Holes) 7053 x 10” 7055 x 14” Radius Cover Cap 1-1/4” x 1-1/4” x 1/8” Channel x 20’ 13-63-230 2 Blades Interlocked Together 41-63-701 41-63-831 41-63-837N 41-63-803 41-63-804 41-63-805 41-63-700 3-Wave Blade Decorative Bahama Schematic (Exterior View) Center Mullion option not shown 3-Wave Blade Samples Powder Coated WB-SAMPLE 12” x 24” WBA-SAMPLE 12” x 24” Arched For Hinges & Components see Hurricane pp 53-54 Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 02/01/21 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 52 BAHAMA/COLONIAL HINGES For additional Components see Hurricane p54 (next page) Bahama Female Hinge x 20’ 41-63-803 Mill Finish 6 pcs 1” Build-Out Bahama Female Hinge x 20’ 41-63-804 Mill Finish 6 pcs Bahama Female Flat Hinge x 20’ 41-63-805 Mill Finish 6 pcs Bahama Male Hinge x 20’ 41-63-814 Mill Finish 16 pcs Colonial Single HInge x 12’ 41-63-816 Wall Mount Mill Finish 6 pcs Mates with 41-63-824N Colonial Double Hinge x 12’ 41-63-813 Wall Mount Mill Finish 4 pcs Mates with 41-63-824N 2.25 Colonial Double Hinge x 12’ 52-61-4146 Wall Mount Mill Finish 4 pcs Mates with 41-63-824N Colonial Flat HInge x 12’ 41-63-811 Wall Mount Mill Finish 6 pcs Mates with 41-63-824N Colonial Flat HInge x 12’ 41-63-824N Shutter Mount Mill Finish 6 pcs; Mates with 41-63-816, 41-63-813, 41-63-811, 41-63-824N, 52-61-4146 Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 07/22/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 53 HV LOW PROFILE BAHAMA PUNCHED CENTER MULLION 41-63-838PZ (Z-blade) Used for wider spans. Mill Finish Bahama Applications HV LOW PROFILE VERTICAL FRAME WITH SNAP x 16’ 2” for Z-Blade System Mates with 41-63-861R/L 41-63-860 Mill Finish HV LOW PROFILE Z - SNAP PLATE x 16’ 2” for Z-Blade System Mates with 41-63-860 Punched to accept Z- Blade 41-63-861R Right MF 41-63-861L Left MF HV LOW PROFILE BAHAMA FRAME MALE HINGE x 12' 41-63-837 Mill Finish NOT PRE-PUNCHED Left BAHAMA/COLONIAL COMPONENTS Used in a variety of Bahama/Colonial Systems 1” SLIP COLLAR WITH THUMB SCREW Accepts 1” Serrated Tube for Telescoping Arms 7000 (FL/TX)Mill Finish x 9/16” 7000WH White x 9/16” 7000BK Black x 9/16” 7000MB Bronze x 9/16” MILL ORDER 52-63-2484 MF x 20’ 52-00-139 (TX) Mill Finish x 9/16” (No Thumbscrew) 41014 (TX)1/4-20 x 3/4 Thumbscrew (mates with 52-00-139) 41021 (TX)1/4-20 x 1 Thumbscrew (mates with 52-00-139) Piano Hinge x 6’ 41-63-871 2” open width .062” thick; 1/8” pin Mill Finish; without holes For use with Decorative Colonials HV™ Bahama Telescoping Arm Kit Kit includes 2 Tubes, Slip Collar, Camel Back, Cap and U-Clip. (Approximate Max Extended Length shown in parenthesis) Code Arm Size (Extended) Finish Code Arm Size (Extended) Finish 7002K 12” (23”) MF 7017K 30” (59”) MF 7002KWH 12” (23”) White 7017KWH 30” (59”) White 7002KBK 12” (23”) Black 7017KBK 30” (59”) Black 7002KMB 12” (23”) Bronze 7017KMB 30” (59”) Bronze 7003K 18” (35”) MF 7018K 36” (71”) MF 7003KWH 18” (35”) White 7018KWH 36” (71”) White 7003KBK 18” (35”) Black 7018KBK 36” (71”) Black 7003KMB 18” (35”) Bronze 7018KMB 36” (71”) Bronze 7004K 24” (47”) MF 7004KWH 24” (47”) White 7004KBK (FL/TX)24” (47”) Black 7004KMB 24” (47”) Bronze Telescoping Serrated Tube x 20’ Mill Finish 52-63-537 .875” 26 pcs 51-63-381 1.000” 32 pcs Corner Key/Tie Down Mill Finish Angle 2 x 2 x 1/8 x 20’ 11-63-315 2 x 2 x 3/16 x 20’ 11-63-320 Low Pro Hold Back Clip LP-HOLDBACK (1 of each: LP-003 & LP-004) Boxed in pairs of 100 Fixed Low Pro Colonial Mounting Bracket 1.5 x 1.5 x .062 Angle Pre-Drilled 3/16” Holes 7058 x 4" 7053 x 10" 7055 x 14" CAMEL BACK CLIP WITH PIN 7001 Mill Finish 7001WH White 7001BK Black 7001MB Bronze Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 07/22/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 54 Pre-Fabricated Hurricane Protection Products Extrusions, components and systems listed in Hurricane section. Please ask your Sales Representative for more information. Accordion Shutters • HV™ Blade 1 • HV™ Combo (Blade 1 and 2) Roll Shutters • End Retention Systems: 40mm, 55mm, 58mm • Non-End Retention Systems: 40mm, 58mm, 63mm • Roll Shutter Hood Manufacturing Bahama & Colonial Shutters • Code Approved: High Visibility™, HV™ Board & Batten • Decorative: HV™ Low Profile (mechanical & welded) • 3-Wave Blade Colonial • Raised Panel Colonial (assembled only) • Powder Coating available Roll Formed Storm Panels • .040 Aluminum (2-¼” in Mill Finish) • .050 Aluminum (2” & 2-¼” in Mill Finish & White) • Galvanized Steel (2” & 2-¼” panels) • Clear Polycarbonate (2” & 2-¼” panels) Pre-Fabricated Hurricane Shutters Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 07/22/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 55 Raised Panel Decorative Colonial • Available in a variety of colors, widths and heights • Only sold assembled Options include: • Raised Panel (raised panel top & bottom) • Raised Panel Combination (Raised Panel & 2" HV™ Low Profile Deco Slat) • Flat Panel (not shown) • Mounting Brackets 1-1/2" x 1-1/2" x .062 Angle 4" Bracket 10" Bracket 14" Bracket • Samples Available RP-Sample 12" x 24" Raised Panel RPLP-Sample 12" x 24" Raised Panel Combo • Engineering Available Upon Request Fabricated Products: Raised Panel Decorative Colonial Shutter Eastern Metal Supply www.easternmetal.com • info@easternmetal.com 07/22/20 FL: 800-432-2204 • NC/DE/GA: 800-343-8154 • TX/AR: 800-996-6061 • MO/OH: 888-822-6061 HURRICANE 56