HomeMy WebLinkAboutProdcut Approval-roof tile Ikit ®
BCIS Home Log In User Registration Hot Topics Submit Surcharge Stats&Facts Publications i Contact Us j BCIS Site Map i Links Search
drFioritia
V Product Approval 006
USER: Public User �(
.,. REVIEWED FOR
66
Product Approval Menu>Product or Application Search>Application List>Application Detail
• • �V FL # FL7849 R14 C COMPLIANCE
ODE
Application Type Revision ST. LUCIE COUNTY
Code Version 2020 BOCC
Application Status Approved
*Approved by DBPR. Approvals by DBPR shall be reviewed and ratified by
the POC and/or the Commission if necessary.
Fi.le CLAY
Comments
Archived
RECEIVED
Product Manufacturer Boral Roofing
Address/Phone/Email 7575 Irvine Center Drive JUN 0 1 1011
Suite 100
Irvine, CA 92618 Permitting Department
(801) 380-6091 St. Lucie County
RobinAnderson@boral.com
Authorized Signature Anderson Robin
RobinAnderson@boral.com
Technical Representative Robin Anderson
Address/Phone/Email 10701 So. River Front Parkway
Suite 300
So. Jordan, UT 84095
(801) 380-6091
robinanderson@boral.com
Quality Assurance Representative Robin Anderson
Address/Phone/Email 7575 Irvine Center Dr. #100
Irvine, CA 92618
(801) 380-6091
robinanderson@boral.com
Category Roofing
Subcategory Roofing Tiles
Compliance Method Evaluation Report from a Product Evaluation Entity
Evaluation Entity IAPMO Uniform Evaluation Services LLC.
Quality Assurance Entity QAI Laboratories
Quality Assurance Contract Expiration Date 12/31/2025
Validated By Gary W. Walker
Validation Checklist- Hardcopy Received
Certificate of Independence FL7849 R14 COI IAPMO Uniform ES - Certificate of Independence.pdf
Referenced Standard and Year(of Standard) Standard Year
ASTM C1492 2009
ASTM E108 2016
Equivalence of Product Standards
Certified By
Sections from the Code
Product Approval Method Method 1 Option C
Date Submitted 02/15/2021
Date Validated 05/07/2021
Date Pending FBC Approval
Date Approved 05/11/2021
Summary of Products
Go to Page (0 0 0 Page 2/2 0 0
D
Model, Number or Name Description
:Approved
1j Saxony 900 Flat Profile- Okeechobee, FL
of U Installation Instructions
HVHZ: No FL7849 R14 II EBS-Installation.{�df
e for use in
HVHZ: Yes FL7849 R14 II Florida High Wind Tile Installation Manual -
Impact Resistant: N/A 6th Edition.Rd
Design Pressure: N/A Verified By: IAPMO Uniform Evaluation Services LLC.
Other: Created by Independent Third Party:
Evaluation Reports
FL7849 R14 AE IAPMO UER 0412 w EP.pdf
7849.22 Saxony 900- Hartford Slate, Shake, Flat Profile- Stockton, CA
Slate, Country Slate&Split Old
English Thatch
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL7849 R14 II EBS-Installtion.pdf
Approved for use outside HVHZ: Yes FL7849 R14 II Florida High Wind Tile Installation Manual -
Impact Resistant: N/A 6th Edition.pdf
Design Pressure: N/A Verified By: IAPMO Uniform Evaluation Services LLC.
Other: Created by Independent Third Party:
Evaluation Reports
FL7849 R14 AE IAPMO UER 0412 w EP.pdf
7849.23 Saxony 900- Shake&Slate Flat Profile- Lathrop, CA
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL7849 R14 II EBS-Installtion.pdf
Approved for use outside HVHZ: Yes FL7849 R14 II Florida High Wind Tile Installation Manual -
Impact Resistant: N/A 6th Edition.pd
Design Pressure: N/A Verified By: IAPMO Uniform Evaluation Services LLC.
Other: Created by Independent Third Party:
Evaluation Reports
FL7849 R14 AE IAPMO UER 0412 w ERpd
7849.24 Saxony 900 -Shake, Slate&Country Flat Profile- Henderson, NV
Slate
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL7849 R14 II EBS-Installtion.pdf
Approved for use outside HVHZ: Yes FL7849 R14 II Florida High Wind Tile Installation Manual -
Impact Resistant: N/A 6th Edition.p 1f
Design Pressure: N/A Verified By: IAPMO Uniform Evaluation Services LLC.
Other: Created by Independent Third Party:
Evaluation Reports
FL7849 R14 AE IAPMO UER 0412 w EP pdf
7849.25 Saxony 900 - Shake, Slate, Split Flat Profile- Lake Wales FL
lShake&Country Slate
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL7849 R14 II EBS-Installtion.pdf
Approved for use outside HVHZ: Yes FL7849 R14 II Florida High Wind Tile Installation Manual -
Impact Resistant: N/A 6th Edition.pdf
Design Pressure: N/A Verified By: IAPMO Uniform Evaluation Services LLC.
Other: Created by Independent Third Party:
Evaluation Reports
FL7849 R14 AE IAPMO UER 0412 w EP pdf
7849.26 Saxony 900 -Slate, Shake&Country Flat Profile - Rialto, CA
Shake
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL7849 R14 II EBS-Installtion.pdf
Approved for use outside HVHZ: Yes FL7849 R14 II Florida High Wind Tile Installation Manual -
Impact Resistant: N/A 6th Edition.pdf
Design Pressure: N/A Verified By: IAPMO Uniform Evaluation Services LLC.
Other: Created by Independent Third Party:
Evaluation Reports
FL7849 R14 AE IAPMO UER 0412 w EP.p�
7849.27 Tejas Espana/Barcelona High Profile- Katy,TX
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL7849 R14 II EBS-Installation.pdf
Approved for use outside HVHZ: Yes FL7849 R14 II Florida High Wind Tile Installation Manual -
Impact Resistant: N/A 6th Edition.pdf
Design Pressure: N/A Verified By: IAPMO Uniform Evaluation Services LLC.
Other: Created by Independent Third Party:
Evaluation Reports
FL7849 R14 AE IAPMO UER 0412 w ERpdf
-_ _ - --- il--- --- - — —
7849.28 Villa Low Profile - Katy,TX
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL7849 R14 II EBS Installation.pdf
Approved for use outside HVHZ: Yes FL7849 R14 II Florida High Wind Tile Installation Manual -
Impact Resistant: N/A 6th Edition.pdf
Design Pressure: N/A Verified By: IAPMO Uniform Evaluation Services LLC.
Other: Created by Independent Third Party:
Evaluation Reports
FL7849 R14 AE IAPMO UER 0412 w ERpd
7849.29 Villa Low Profile- Phoenix, AZ
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL7849 R14 II EBS-Installation.pdf
Approved for use outside HVHZ: Yes FL7849 R14 II Florida High Wind Tile Installation Manual -
Impact Resistant: N/A 6th Edition.pdf
Design Pressure: N/A Verified By: IAPMO Uniform Evaluation Services LLC.
Other: Created by Independent Third Party:
Evaluation Reports
FL7849 R14 AE IAPMO UER 0412 w EP.pdf
7849.30 Villa 600&900 Low Profile - Rialto, CA
---------------
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL7849 R14 II EBS-Installtion.pdf
Approved for use outside HVHZ: Yes FL7849 R14 II Florida High Wind Tile Installation Manual -
Impact Resistant: N/A 6th Edition.pdf
Design Pressure: N/A Verified By: IAPMO Uniform Evaluation Services LLC.
Other: Created by Independent Third Party:
Evaluation Reports
FL7849 R14 AE IAPMO UER 0412 w EP.pdf
7849.31 Villa 600 &900 Low Profile -Stockton, CA
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL7849 R14 II EBS-Installtion.pdf
Approved for use outside HVHZ: Yes FL7849 R14 II Florida High Wind Tile Installation Manual -
Impact Resistant: N/A 6th Edition.pdf
Design Pressure: N/A Verified By: IAPMO Uniform Evaluation Services LLC.
Other: Created by Independent Third Party:
Evaluation Reports
FL7849 R14 AE IAPMO UER 0412 w ERpdf
7849.32 Villa 900 Low Profile- Lake Wales, FL
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL7849 R14 II EBS-Installtion.pdf
Approved for use outside HVHZ: Yes FL7849 R14 II Florida High Wind Tile Installation Manual -
Impact Resistant: N/A 6th Edition.pdf
Design Pressure: N/A Verified By: IAPMO Uniform Evaluation Services LLC.
Other: Created by Independent Third Party:
Evaluation Reports
FL7849 R14 AE IAPMO UER 0412 w EP pdf
7849.33 Villa 900 Low Profile-Stockton, CA
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL7849 R14 II EBS-Installation.pdf
Approved for use outside HVHZ: Yes FL7849 R14 II Florida High Wind Tile Installation Manual -
Impact Resistant: N/A 6th Edition.pdf
Design Pressure: N/A Verified By: IAPMO Uniform Evaluation Services LLC.
Other: Created by Independent Third Party:
Evaluation Reports
FL7849 R14 AE IAPMO UER 0412 w EP.pdf
7849.34 Villa 900 Low Profile- Denver, CO
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL7849 R14 II EBS-Installation.pdf
Approved for use outside HVHZ: Yes FL7849 R14 II Florida High Wind Tile Installation Manual
Impact Resistant: N/A 6th Edition.pdf
Design Pressure: N/A Verified By: IAPMO Uniform Evaluation Services LLC.
Other: Created by Independent Third Party:
Evaluation Reports
FL7849 R14 AE IAPMO UER 0412 w EP.pdf
7849.35 Villa Impact Low Profile- Denver, CO
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL7849 R14 II EBS-Installation.pdf
Approved for use outside HVHZ: Yes FL7849 R14 II Florida High Wind Tile Installation Manual -
Impact Resistant: N/A 6th Edition.p-
Design Pressure: N/A Verified By: IAPMO Uniform Evaluation Services LLC.
Other: Created by Independent Third Party:
Evaluation Reports
FL7849 R14 AE IAPMO UER 0412 w EP.pdf
Go to Page 0 0 Page 2/2 0 0
Back Nett
Contact Us::2601 Blair Stone Road,Tallahassee FL 32399 Phone:850-487-1824
The State of Florida is an AA/EEO employer.Copyright 2007-2013 State of Florida. ::Privacy Statement::Accessibility Statement::Refund Statement
Under Florida law,email addresses are public records.If you do not want your e-mail address released in response to a public-records request,do not send electronic
mail to this entity.Instead,contact the office by phone or by traditional mail.If you have any questions,please contact 850.487.1395.*Pursuant to Section 455.275(1),
Florida Statutes,effective October 1,2012,licensees licensed under Chapter 455,F.S.must provide the Department with an email address if they have one.The emails
provided may be used for official communication with the licensee.However email addresses are public record.If you do not wish to supply a personal address,please
provide the Department with an email address which can be made available to the public.To determine if you are a licensee under Chapter 455,F.S.,please click here.
Product Approval Accepts:
® Ed
Credit Card
Safe
A
UE$ E"LUATIONREPORT412
® Originally Issued: 07/31/2015 Revised: 03/29/2020 Valid Through: 07/31/2021
BORAL ROOFING 3.0 PRODUCT USE
7575 Irvine Center Drive, Suite 100
Irvine, California 92618 3.1 General: Boral Roofing Concrete Roof Tiles shall be
(949) 756-1605 used as a roof covering in accordance with IBC Section
www.BoralRootcom 1503 or IRC Section 903,as applicable.
CONCRETE ROOF TILES 3.2 Installation:
CSI Section: 3.2.1 Installation in accordance with the 2018 IBC or
07 32 16 Concrete Roof Tiles IRC: Boral Concrete Roof Tiles shall be installed in
accordance with 2018 IBC Section 1507.3 or 2018 IRC
1.0 RECOGNITION Section R905.3, including the attachment requirements of
Boral Roofing Concrete Roof Tiles recognized in this report 2018 IBC Section 1507.3.7 or 2018 IRC Section R905.3.7,
have been evaluated for use as concrete roof tiles. The as applicable. Underlayment shall conform to 2018 IBC
weather resistance, wind uplift resistance and fire Section 1507.1.1 or 2018 IRC Section R905.1.1.Installation
classification properties of the roof tiles comply with the of accessory tiles,EnviroProe see section 4.1.1.
intent of the provisions of the following codes and
regulations: 3.2.2 Installation in accordance with the 2015, 2012,
2009,or 2006 IBC or IRC:Boral Concrete Roof Tiles shall
• 2018, 2015, 2012, 2009, and 2006 International be fastened in accordance with the code specific
Building Code®(IBC) requirements in Table 1 of this report using The Concrete
• 2018, 2015, 2012, 2009, and 2006 International and Clay Roof Tile Installation Manual for Moderate
Residential Code®(IRC) Climate Regions, dated July 2015, published by the Tile
• 2019 California Building Code(CBC)—Supplement Roofing Institute and the Western States Roofing
attached Contractors Association. The July 2015 TRI manual is
• 2019 California Residential Code (CRC) — associated with ER-2015 in the UES Evaluation Report
Supplement attached Directory and available for download at www.uniform-
• 2020 Florida Building Code, Building (FBC, es•ore. Installation of accessory riles, EnviroPro® see
Building)—Supplement attached section 4.1.1.
• 2020 Florida Building Code, Residential (FBC,
Residential)—Supplement attached TABLE 1—ATTACHMENT DESIGN
Applicable Design
2.0 LIMITATIONS Code Criteria for Applicability Information
Location
Use of the Boral Roofing Concrete Roof Tiles recognized in 2015 or Ultimate Design Wind Roof Tile
this report is subject to the following limitations: 2012 IBC Speeds(Vw,)s 130 MPH and Installation
Mean Roof Hei t<60 feet Manual&Table
2.1 The roof tiles shall be manufactured, identified and 2009 or Basic Wind Speed(3 sec 1507.3.7 of the2006 IBC gust):5 100 mph and Mean applicable IBC
installed in accordance with this report and the applicable Roof Hei t s 60 feet
code.In the event of a conflict this report governs. 2015,2012, Roof Tile
2009 or Mean Roof Heights 40 feet Installation
2.2 Boral Roofing"concrete roof tile shall be installed on 2006 IRC Manual&Section
roof slopes of 21/2 units vertical in 12 units horizontal(21- For SI:1 foot=305 mm,1 mph=1.6 m/s R905.3.7
percent slope)or greater."IBC Section 1507.3.2.
2.3 The supporting structure shall be designed to support the 3.3 Anchoring: Boral Concrete Roof tiles may be anchored
loads and is beyond the scope of this report. using mortar in accordance with the applicable building code
and,where permitted,the TRI Manual or adhesively attached
2.4 The Concrete Roof Tiles recognized in this report are in accordance with the adhesive manufacturer's research
manufactured in Lake Wales,FL;Brookshire,TX;Phoenix, report issued by an approved evaluation service agency.
AZ; Henderson,NV; Okeechobee, FL, Rialto, CA; French
Camp, CA; Henderson, CO and Lathrop, CA; Tables 2 A
through 2 I describe the tiles produced at each location.
C �
The product described in this Uniform Evaluation Service(LIES)Report has been evaluated as an alternative material,design or method of construction in order to satisfy and comply \� E
with the intent of the provision of the code,as noted in this report,and for at least equivalence to that prescribed in the code in quality,strength,effectiveness,fire resistance,durability
and safety,as applicable,in accordance with 18C Section 104.11,This document she//only be reproduced in its entirety.
Copyright®2020 by International Association of Plumbing and Mechanical Officials.All rights reserved.Printed in the United States. Ph:1-877-41ESRPT•Fax:909.472.4171
web:www.uni/orm-es.org•4755 East Philadelphia Street,Ontario,California 91781-2816—USA
ISQ'IEC 11065
Page 1 of 7 "°°""c."m""b"a°°y
UES
EVALUATION REPORT Number: 12
® Originally Issued: 07/31/2015 Revised: 03/29/2020 Valid Through: 07/31/2021
4.0 PRODUCT DESCRIPTION 5.0 IDENTIFICATION
Boral Roofing Concrete Roof Tiles comply with ASTM Shipping pallets are identified with the report holder's
C1492 as required by Section 1507.3.5 of the IBC.The roof name (Boral Roofing), manufacturing address, product
tiles are described by model, weight, dimensions, and tile name, installed weight, inspection agency,and evaluation
factor in Tables 2 A through 2 1, for each of the production report number(ER-412). The Cedarlite 600, Madera 700
locations listed in Section 2.4 of this report. When installed and Madera 900 tiles are imprinted on the top side of each
in accordance with this report on minimum 15/32-inch-thick tile with an"M",all other field tiles are imprinted with the
(12 mm)plywood solid sheathing or non-combustible decks, name "Boral", `Boral Lifetile", "Monierlifetile", or the
the assembly incorporating the roof riles achieve an ASTM Boral Roofing,or MonierLifetile or"Vostile"or logo.The
E108 Class A rating per Section 1505.2 of the IBC and Boral EnviroPro product shall be clearly identified to
Section R902.1 of the IRC, as applicable. Roof provide distinction between field tiles and accessory tiles
classifications for adhesively attached systems shall be in as stated in the EnviroPro product installation guidelines.
accordance with the adhesive manufacturer's approved The identification includes the IAPMO Uniform
research report. Evaluation Service Mark of Conformity. Either Mark of
Conformity may be used as follows:
4.1 Accessories:
Boral EnviroPro® recognized in this report has been
evaluated for use as an accessory product to be used with A P M 0 or U E S
concrete roof tiles. The weather resistance, wind uplift
resistance and fire classification properties of the product E S
complies with the intent of the provisions of the codes and O O
regulations in Section 1.0 of this report.The Boral EnviroPro IAPMO UES ER-412
product is subject to all limitations in Section 2.0 of this
report. The Boral EnviroPro product complies with ASTM 6.0 SUBSTANTIATING DATA
C 1492 as required by Section 1507.3.5 of the IBC.The Boral
EnviroPro product is described by model, weight, Data in accordance with ICC-ES AC180, dated February
dimensions,and tile factor in Tables 2 A through 21,for each 2012 (editorially revised March 2018), manufacturer's
of the production locations listed in Section 2.4 of this report. descriptive literature and installation instructions. Test
When installed in accordance with this report on minimum reports are from laboratories in compliance with ISO/IEC
15/32-inch-thick(12 mm)plywood solid sheathing or non- 17025.
combustible decks, the assembly incorporating the Boral
EnviroPro product achieves an ASTM E108 Class A rating 7.0 STATEMENT OF RECOGNITION
per Section 1505.2 of the IBC and Section R902.1 of the IRC,
as applicable. This evaluation report describes the results of research
completed by IAPMO Uniform Evaluation Service on Boral
4.1.1 Installation: Roofing Concrete Roof Tiles to assess conformance to the
codes shown in Section 1.0 of this report and serves as
The Boral EnviroPro accessory product shall be limited to documentation of the product certification. Products are
installation where roof tiles must be cut, such as in valleys manufactured at locations noted in Section 2.4 of this report
and boundary edges at rakes,walls,chimneys,skylights,and under a quality control program with periodic inspection
other roof openings and penetrations. The installed dry under the supervision of IAPMO UES.
weight of Boral EnviroPro is equivalent to that of the tile
profile in Tables 2A-21 with which it is used. For additional information about this evaluation report please visit
www.uniform-es.or or email us at info(Wuniform-es.ore
Page 2 of 7
EVALUATION REPORT Numberz, 412
CUE
Originally Issued: 07/31/2015 Revised: 03/29/2020 Valid Through: 07/31/2021
Table 2 A-Tiles Manufactured at Denver(Henderson),CO
Installed Dr DimemsionsZ
Y Tile Factor
Tile Weight' inch
(psf) Length X Width TF(ft3) Ratio'
Saxony—Shake,Slate,Country 9.6 17 X 13 1.568 1.115
Slate Split Old English Thatch
Saxon —Im act 10.5 17 X 13 1.568 1.115
Villa 900 9.0 17 X 13 1.503 1.068
Villa—Impact 10.1 17 X 13 1 1.503 1.068
For SI: I inch=25.4 mm,1 psf=4.88 kg/mZ
Table 2 B-Tiles Manufactured at Henderson,NV
Installed D DimemsionsZ
r3' Tile Factor
Tile Weight' inch
(psf) Length X Width TF(ft3) Ratio I
Espana/Barcelona 9.0 17 X 123/8 1.470 1.045
Saxony 900—Shake,Slate, 9.1 17 X 13 1.533 1.090
Country Slate
For SI: I inch=25.4 mm,1 psf=4.88 kg/m2
Table 2 C-Tiles Manufactured at Katy(Brookshire),TX
Installed Dry DimemsionsZ Tile Factor
Tile Weight' inch
(psf) Length X Width TF(ft3) Ratio'
Barcelona—Impact 10.3 16'/2 X 13 1.444 1.027
Saxony—Country Shake,Country
Slate,Country Split Shake,English 10.3 16%2 X 13 1.392 0.989
Thatch
Saxon —Impact 10.5 16'/2 X 13 1.392 0.989
Saxon —Shake,Slate 10.3 16'/2 X 13 1.392 0.989
Teas Espana/Barcelona 9.0 16'/2 X 13 1.407 1.000
Villa 9.0 16'/2 X 13 1.407 1.000
For SI:1 inch=25.4 mm,1 psf=4.88 kg/m2
NOTES TO TABLES:
1. Used on a 3-inch head-lap.
2. Nominal dimension.
Page 3 of 7
VEg EVALUATION REPORT Number:,,,,, , 12
® Originally Issued: 07/31/2015 Revised: 03/29/2020 Valid Through: 07/31/2021
Table 2 D-Tiles Manufactured at Lake Wales,FL
Installed Dry Dimemsions2 Tile Factor
Tile Weight' inch
(psf) Length X Width TF(ft3) Ratio'
Barcelona 900 9.5 17 X 13 1.525 1.084
Saxony 900—Shake,Slate,Split 9.5 17 X 13 1.545 1.098
Shake Country Slate
Spanish"S"Nuevo 9.9 17 X 93/4 1.144 0.813
Villa 900 9.2 17 X 13 1.533 1.090
For SI: 1 inch=25.4 mm,I psf=4.88 kg/m2
Table 2 E-Tiles Manufactured at Lathrop,CA
Installed Dry Dimemsions2 Tile Factor
Tile Weight' inch
(psf) Length X Width TF(ft3) Ratio'
Barcelona 900 9.3 17 X 13 1.509 1.073
Saxon 900—Shake Slate 9.1 17 X 13 1.533 1.090
For SI: 1 inch=25.4 mm,I psf=4.88 kg/m2
Table 2 F-Tiles Manufactured at Phoenix,AZ
Installed Dry Dimemsions2 Tile Factor
Tile Weight' inch
(psf) Length X Width TF(ft3) Ratio'
Mission S/Barcelona 10.3 16'/2 X 13 1.494 1.062
Saxon —Shake,Slate 9.5 16'/2 X 13 1.494 1.062
Villa 9.0 16%2 X 13 1.407 1.000
For SI:1 inch=25.4 mm,1 psf=4.88 kg/m2
Table 2 G-Tiles Manufactured at Okeechobee,FL
Installed Dry Dimemsions2 Tile Factor
Tile Weight' inch
(psf) Length X Width TF(ft3) Ratio'
Bermuda 12.44 16'/s X 101/s 1.036 0.736
Estate"S" 7.9 16%2 X 13 1.417 1.007
Galena Spanish"S" 9.3 17 X 10 1.144 0.831
Plantation 10.4 16'/2 X 13 1.426 1.014
Saxony 900 9.3 17 X 13 1.533 1 1.090
For SI:1 inch=25.4 mm,1 psf=4.88 kg/mz
NOTES TO TABLES:
I. Used on a 3-inch head-lap.
2. Nominal dimension.
Page 4 of 7
UES EVALUATION REPORTNumber: 12
Originally Issued: 07/31/2015 Revised: 03/29/2020 Valid Through: 07/31/2021
Table 2 H-Tiles Manufactured at Rialto,CA
Installed D DimemsionsZ
Dry Tile Factor
Tile Weight' inch
(psf) Length X Width TF(ft3) Ratio
Espana/Barcelona 9.0 17 X 123/s 1.454 1.033
Espana 600/Barcelona 600 5.9 17 X 123/s 1.454 1.033
Saxony 600-Slate,Shake,Split 5.9 17 X 13 1.533 1.090
Shake
Saxony 700-Slate,Shake,Split 7.1 17 X 13 1.533 1.090
Shake
Saxony 900-Slate,Shake,Country 9.3 17 X 13 1.533 1.090
Shake
Villa 600 5.8 17 X 13 1.494 1.061
Villa 900 9.0 17 X 13 1.494 1.061
For SI:1 inch=25.4 mm,1 psf=4.88 kg/m2
Table 2 I-Tiles Manufactured at Stockton(French Camp),CA
Installed Dry DimemsionsZ Tile Factor
Tile Weight' inch
(psf) Length X Width TF(ft3) Ratio'
Cedarlite 600 5.9 13'/2 X 13 0.942 0.673
Madera 700 7.2 13'/2 X 13 0.947 0.673
Madera 900 9.5 13'/2 X 13 0.947 0.673
Saxon 600-Slate Shake Split Shake 5.7 17 X 13 1.525 1.084
Saxon 700-Slate,Shake,Split Shake 7.2 17 X 13 1.525 1.084
Saxony 900-Hartford Slate,Shake,Slate Country Slate 9.1 17 X 13 1.533 1.090
Saxon 900-Split Old English Thatch 9.8 17 X 13 1.525 1.084
Villa 600 6.0 17 X 13 1.494 1.115
Villa 900 9.3 17.X 13 1.494 1.115
For SI:1 inch=25.4 mm,1 psf=4.88 kg/m2
NOTES TO TABLES:
1. Used on a 3-inch head-lap.
2. Nominal dimension.
Page 5 of 7
qUES . 412
Originally Issued: 07/31/2015 Revised: 03/29/2020 Valid Through: 07/31/2021
CALIFORNIA SUPPLEMENT 2.4 Boral Roofing concrete roof tiles used on structures
regulated by the Division of the State Architect or the Office
BORAL ROOFING of Statewide Planning and Development are subject to
7575 Irvine Center Drive, Suite 100 installation provisions in CBC Section 1513.
Irvine, California 92618 For additional information about this evaluation report please visit
(949)756-1605 www.uniform-es.ore or email us at infoaa uniform-es.ore
www.boralamerica.com
CONCRETE ROOF TILES
CSI Section:
07 32 16 Concrete Roof Tiles
1.0 RECOGNITION
The Boral Concrete Roof Tiles and accessories evaluated in
IAPMO UES ER412 are satisfactory alternative roof
covering materials in accordance with the following codes
and regulations:
• 2019 California Building Code(CBC)
• 2019 California Residential Code(CRC)
2.0 PRODUCT USE
2.1 The Boral Roofing concrete roof tiles may be used as a
Class A, B, or C roof covering systems complying with
Sections 1505.1.1 of the CBC or R902.1.1 of the CRC;
Sections 1505.1.2 of the CBC or R902.1.2 of the CRC; or
Sections 1505.1.3 of the CBC or R902.1.3 of the CRC,
respectively. The design and installation of the Boral
Roofing concrete roof tiles shall be in accordance with
Sections 1507.3.10 and 1513 CBC or Section 905.3 of the
CRC,as applicable,and ER412.
2.2 Roof Tiles shall be installed in accordance with Sections
3.0 and 4.0 of ER412 except, where the building official
requires conformance to the CBC or CRC,the following shall
be substituted:
2.2.1 Underlayment shall conform with CBC Section
1507.1.1 or CRC Section 905.1.1.
2.2.2 Attachment of the concrete roof tiles shall be designed
to resist wind loads according to CBC Sections 1507.3.7
and 1609.5 or CRC Section 905.3,as applicable.
2.3 Boral Roofing concrete roof tiles may be used in"new
buildings located in any Fire Hazard Severity Zone or any
Wildland-Urban Interface Fire Area designated by the
enforcing agency constructed after the application date shall
comply with the provisions" in accordance with Sections
701A.3 and 705A of the CBC, or Sections R337.1.3.1 and
R337.5 of the CRC, as applicable, and with the IBC as
presented in ER-412.
Page 6 of 7
m =
DES EVALUATION REPORT Number& 412
Originally Issued: 07/31/2015 Revised: 03/29/2020 Valid Through: 07/31/2021
FLORIDA SUPPLEMENT combinations shall be in accordance with Sections 1605.2
or 1605.3 of the FBC,Building,as applicable.Design wind
BORAL ROOFING loads shall be in accordance with Section 1609.5 of the FBC,
7575 Irvine Center Drive, Suite 100 Building or Section R301.2.1 of the FBC, Residential, as
Irvine, California 92618 applicable.
(949)756-1605
www.boralamerica.com For additional information about this evaluation report please visit
www.uniform-es.ora or email us at info6i uniform-es.ore
CONCRETE ROOF TILES
CSI Section:
07 32 16 Concrete Roof Tiles
1.0 RECOGNITION
The Boral Roofing concrete roof tiles and accessories
evaluated in IAPMO UES ER-412 are a satisfactory
alternative roof covering materials in accordance with to the
following codes and regulations:
• 2020 Florida Building Code, Building (FBC,
Building)
• 2020 Florida Building Code, Residential (FBC,
Residential)
2.0 LEMTATIONS
2.1 Verification shall be provided that a quality assurance
agency audits the manufacturers quality assurance program
and audits the production quality of products, in accordance
with Section(5)(d)of Florida Rule 61 G20-3.008.The quality
assurance agency shall be approved by the Commission(or
the building official when the report holder does not possess
an approval by the Commission).
2.2 Evaluation to the high-velocity hurricane zone
provisions in Section 1512 of the FBC, Building and
Chapter 44 of the FBC, Residential is beyond the scope of
this report.
3.0 PRODUCT USE
The design and installation of the Boral Roofing concrete
roof tiles shall be in accordance with the 2018 International
Building Code and the 2018 International Residential Code,
as applicable, as noted in ER-412. The FBC, Building
Section 1507.3 and FBC,Residential Section R905.3 states
that the installation of the Boral Roofing concrete roof tiles
"shall be in accordance with the requirements of the
FRSA/TRI Florida High Wind Concrete and Clay Roof Tile
Installation Manual, Sixth Edition where the V.,d is
determined in accordance with" FBC, Building Section
1609.3.1, FBC-Residential Section R301.2.1.3, or the
recommendations of RAS 118, 119 or 120. Load
Page 7 of 7