Loading...
HomeMy WebLinkAboutProject Information pWiV iir : 1-404 - 0011 CFI FOAM, INC. cFeLE. Injection Foam Products for the Cores ofF'reC, Concrete Masonry Units (CMU) Masonry Foam Insulation 1 SUL -_ SMART _ Interior Foam Insulation' 1 SUL 4 SMART ►wH t t # '.rY�'� Core Foam Masonry Foam Insulation@ is not associated with and is a different product from the Core Fill-500TM products manufactured Drawings for Illustrative Purposes Only by Tailored Chemical Products, Inc. Product Description: Basic Use: • R-Value per inch: 5.0 inch @ 25°F;4.6 inch @ 757 Injection Foam Insulation for Enclosed Cavity Applications. • Flame Spread: <25 per ASTM E-84 @ 4" •Smoke Developed: <450 per ASTM E-84 @ 4" Since cfiFOAM products are a solid, physical characteris- •Fire Classification: Class A tics such as boiling point, vapor pressure, vapor density, •STC Rating: 54-60 dB in 8"CMU walls percent volatiles, evaporation rate, etc., do not apply. 58-61 dB in 12"CMU walls Color and Odor: White semi-rigid foam with •Shrinkage: <0.5% • minimal odor VOC Emissions: <16 ppb Density: 0.5-1.0 Ib/ft Usage Precautions: Ventilate well until foam Application: fully cures. Walls can be filled with foam using either top-fill or pressure- Hazardous Components: None present at levels injection techniques using 5/8"to 7/8"holes. Prior to instal- above 0.1% lation, the wall should not have any standing water in the Personal Protection: Safety glasses and gloves CMU cores and no visible wetness on the exterior surface. A 72-hour curing period is normally suggested prior to painting wall.Foam should not be exposed to surfaces over 190°F for Testing: ASTM E-84,ASTM C-518, an extended period of time. Foam should not be used for ASTM D-1621,ASTM E-96, flotation, in horizontal applications or as a waterproofing ASTM D-2842, NFPA 259, material. ASTM D-51 16 ©cfiFOAM, Inc.-2014 oa cfiFOAM,Inc. CH 1 FOAMP.O. ,1 N c• Box 10393` Knoxville,l'N 37939 800-656-FOAM 3626 INJECTION FOAM PRODUCTS Fax: 865-588-6607 www.cfifoam.com Pe I� *� , 1-704 - oo 1 I CH FOAM, INC. C&E Injection Foam Products for the Cores of F Concrete Masonry Units (CMU) Masonry Foam Insulation ' SUS SMART ` Interior Foam Insulation' SUL SMART M" Core Foam Masonry Foam Insulation@ is not associated with and is a different product from the Core Fill-500TM products manufactured Drawings for Illustrative Purposes Only by Tailored Chemical Products,inc. Product Description: Basic Use: • R-Value per inch: 5.0 inch @ 25°F;4.6 inch @ 75°F Injection Foam Insulation for Enclosed Cavity Applications. • Flame Spread: <25 per ASTM E-84 @ 4" •Smoke Developed: <450 per ASTM E-84 @ 4" Since cfiFOAM products are a solid, physical characteris- •Fire Classification Class A tics such as boiling point, vapor pressure, vapor density, •STC Rating: 54-60 dB in 8"CMU walls percent volatiles, evaporation rate, etc., do not apply. 58-61 dB in 12"CMU walls Color and Odor: White semi-rigid foam with •Shrinkage: <0.5% minimal odor •VOC Emissions: <16 ppb Density: 0.5-1.0 lb/ft3 ,application: Usage Precautions: Ventilate well until foam Walls can be filled with foam using either top fill or pressur fully cures. e- Hazardous Components: None present at levels injection techniques using 5/8"to 7/8"holes. Prior to instal- above 0.1°1° lotion, the wall should not have any standing water in the CMU cores and no visible wetness on the exterior surface. A Personal Protection: Safety glasses and gloves 72-hour curing period is normally suggested prior to painting wall.Foam should not be exposed to surfaces over 190°F for Testing: ASTM E-84,ASTM C-518, an extended period of time. Foam should not be used for ASTM D-1627,ASTM E-96, flotation, in horizontal applications or as a waterproofing ASTM D-2842, NFPA 259, material. ASTM D-51 16 ©cfiFOAM, Inc.-2014 /1� oo cfiFOAM,Inc. �1�, FOAM,mc. 10.lox 10393�Knoxville,Ti413?939 800-656-FOAM 3626 iNJECTION FOAM PRODUCTS Fax: 865-588-6607 vvww cr`ifoaM.co►n