Loading...
HomeMy WebLinkAboutPRODUCT APPROVAL ROOFING TILES6/7/2021 Florida Building Code Online https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDqtO4mGNBAAIXGaCXFLgsFDOpzpXOE0F7PMiYxusW7hGKg%3d%3d 1/5 BCIS Home Log In User Registration Hot Topics Submit Surcharge Stats & Facts Publications Contact Us BCIS Site Map Links Search Product Approval USER: Public User Product Approval Menu > Product or Application Search > Application List > Application Detail FL #FL7849-R14 Application Type Revision Code Version 2020 Application Status Approved *Approved by DBPR. Approvals by DBPR shall be reviewed and ratified by the POC and/or the Commission if necessary. Comments Archived Product Manufacturer Boral Roofing Address/Phone/Email 7575 Irvine Center Drive Suite 100 Irvine, CA 92618 (801) 380-6091 RobinAnderson@boral.com Authorized Signature Anderson Robin RobinAnderson@boral.com Technical Representative Robin Anderson Address/Phone/Email 10701 So. River Front Parkway Suite 300 So. Jordan, UT 84095 (801) 380-6091 robinanderson@boral.com Quality Assurance Representative Robin Anderson Address/Phone/Email 7575 Irvine Center Dr. #100 Irvine, CA 92618 (801) 380-6091 robinanderson@boral.com Category Roofing Subcategory Roofing Tiles Compliance Method Evaluation Report from a Product Evaluation Entity Evaluation Entity IAPMO Uniform Evaluation Services LLC. Quality Assurance Entity QAI Laboratories Quality Assurance Contract Expiration Date 12/31/2025 Validated By Gary W. Walker Validation Checklist - Hardcopy Received Certificate of Independence FL7849_R14_COI_IAPMO Uniform ES - Certificate of Independence.pdf Referenced Standard and Year (of Standard)Standard Year ASTM C1492 2009 ASTM E108 2016 Equivalence of Product Standards Certified By Sections from the Code 6/7/2021 Florida Building Code Online https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDqtO4mGNBAAIXGaCXFLgsFDOpzpXOE0F7PMiYxusW7hGKg%3d%3d 2/5 Product Approval Method Method 1 Option C Date Submitted 02/15/2021 Date Validated 05/07/2021 Date Pending FBC Approval Date Approved 05/11/2021 Summary of Products Go to Page Page 1 / 2 FL #Model, Number or Name Description 7849.1 Barcelona - Impact High Profile - Katy, TX Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installtion.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.2 Barcelona 900 High Profile - Lake Wales, FL Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installtion.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.3 Barcelona 900 High Profile - Lathrop, CA Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installtion.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.4 Bermuda Flat Profile - Okeechobee, FL Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installation.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.5 Cedarlite 600 Flat Profile - Stockton, CA Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_Cedarlite Madera-Installation.pdf FL7849_R14_II_EBS-Installtion.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.6 Espana / Barcelona High Profile - Rialto, CA Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installtion.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: 6/7/2021 Florida Building Code Online https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDqtO4mGNBAAIXGaCXFLgsFDOpzpXOE0F7PMiYxusW7hGKg%3d%3d 3/5 Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.7 Espana / Barcelona High Profile - Henderson, NV Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installtion.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.8 Espana 600 / Barcelona 600 High Profile - Rialto, CA Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installtion.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.9 Estate "S"Low Profile - Okeechobee, FL Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installation.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.10 Galena Spanish "S"High Profile - Okeechobee, FL Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installation.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.11 Madera - 700 & 900 Flat Profile - Stockton, CA Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_Cedarlite Madera-Installation.pdf FL7849_R14_II_EBS-Installtion.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.12 Mission S / Barcelona High Profile - Phoenix, AZ Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installtion.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.13 Plantation Flat Profile - Okeechobee, FL Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installation.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.14 Saxony - Country Shake, Country Slate, Country Split Shake, English Thatch, Impact, Shake & Slate Flat Profile - Katy, TX 6/7/2021 Florida Building Code Online https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDqtO4mGNBAAIXGaCXFLgsFDOpzpXOE0F7PMiYxusW7hGKg%3d%3d 4/5 Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installtion.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.15 Saxony - Shake & Slate Flat Profile - Phoenix, AZ Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installation.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.16 Saxony - Shake, Slate, Country Slate, Split Old English Thatch & Impact Flat Profile - Denver, CO Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installtion.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.17 Saxony 600 - Slate, Shake & Split Shake Flat Profile - Stockton, CA Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installtion.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.18 Saxony 600 - Slate, Shake & Split Shake Flat Profile - Rialto, CA Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installtion.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.19 Saxony 700 - Shake, Slate & Split Shake Flat Profile - Stockton, CA Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installtion.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf 7849.20 Saxony 700 - Shake, Slate & Split Shake Flat Profile - Rialto, CA Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: N/A Other: Installation Instructions FL7849_R14_II_EBS-Installtion.pdf FL7849_R14_II_Florida High Wind Tile Installation Manual - 6th Edition.pdf Verified By: IAPMO Uniform Evaluation Services LLC. Created by Independent Third Party: Evaluation Reports FL7849_R14_AE_IAPMO UER_0412 w_EP.pdf Go to Page Page 1 / 2 6/7/2021 Florida Building Code Online https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDqtO4mGNBAAIXGaCXFLgsFDOpzpXOE0F7PMiYxusW7hGKg%3d%3d 5/5 Back Next Contact Us :: 2601 Blair Stone Road, Tallahassee FL 32399 Phone: 850-487-1824 The State of Florida is an AA/EEO employer. Copyright 2007-2013 State of Florida. :: Privacy Statement :: Accessibility Statement :: Refund Statement Under Florida law, email addresses are public records. If you do not want your e-mail address released in response to a public-records request, do not send electronic mail to this entity. Instead, contact the office by phone or by traditional mail. If you have any questions, please contact 850.487.1395. *Pursuant to Section 455.275(1), Florida Statutes, effective October 1, 2012, licensees licensed under Chapter 455, F.S. must provide the Department with an email address if they have one. The emails provided may be used for official communication with the licensee. However email addresses are public record. If you do not wish to supply a personal address, please provide the Department with an email address which can be made available to the public. To determine if you are a licensee under Chapter 455, F.S., please click here . Product Approval Accepts: BATTEN INSTALLATION • Battens are to be fastened through the batten and through the plastic pads. Locations of pads are marked with a target on top of the batten for ease of installation. Pads are located 12” on center to allow 12” or 24” on center as required per code and roof design. • Battens are to be fastened to the deck with corrosion-resistant fasteners. Batten fasteners are to be 8d nails, #8 - 2-inch wood screws at 24-inch on centers, or 2-inch long 16 gauge staples with 7/16- inch crown at 12-inch on centers. Batten fasteners are to either penetrate 3/4-inch into the roof deck or framing or through the roof deck whichever is less. • EBS compatible eave risers should be used to insure proper elevation of eave tiles. TILE INSTALLATION Basic wind speed less than 100 mph and with a mean roof height of 40 feet or less. • Fasten tiles to the battens only. Tile fasteners must completely penetrate the batten, but not penetrate the underlayment, deck or framing using the following recommended fastener lengths: Basic wind speed 100 mph or greater or mean roof height greater than 40 feet. • Roof tiles must be attached in accordance with the “Design Considerations for High Wind Application” in the Tile Roofing Institute (TRI) Concrete and Clay Roof Tile – Installation Manual for Moderate Climate Regions or the Florida Roofing and Sheet Metal ssociation (FRSA)/TRI Concrete and Clay Roof Tile Installation Manual. • Tile fasteners are to either penetrate 3/4-inch into the roof deck or framing or through the roof deck,whichever is less. EBS USAGE RECOMMENDATIONS Cedarlite & Madera • 120 linear feet when courses are 9.25 to 10 inches (Each bundle equals 0.8 squares). • 130 linear feet when courses are less than 9.25 inches (Each bundle equals .738 squares). All other tiles • 80 linear feet when courses are 13.3 to 14 inches (Each bundle equals 1.2 squares). • 90 linear feet when courses are 12.1 to 13.3 inches (Each bundle equals 1.016 squares). Usage may vary depending on tile course layout and adjustments for roof size.TILE PROFILE RECOMMENDED FASTENER LENGTH Flat Profiles 1 3/4” High Profiles 1 3/4” at pan 3” at crown Medium Profiles 2 1/2” at center hole 3” at side holes Elevated Batten System® INSTALLATION GUIDE © 2016 Boral Roofing LLC AC542-6/16 The following guidelines are provided to insure proper installation of Elevated Batten System®, however check local building code for additional or different fastening requirements Boral Roofing Build something great™ 1.800.669.TILE (8453) | www.BoralRoofComponents.com Number: 412 Originally Issued: 07/31/2015 Revised: 03/29/2020 Valid Through: 07/31/2021 The product described in this Uniform Evaluation Service (UES) Report has been evaluated as an alternative material, design or method of construction in order to satisfy and comply with the intent of the provision of the code, as noted in this report, and for at least equivalence to that prescribed in the code in quality, strength, effectiveness, fire resistance, durability and safety, as applicable, in accordance with IBC Section 104.11. This document shall only be reproduced in its entirety. Copyright © 2020 by International Association of Plumbing and Mechanical Officials. All rights reserved. Printed in the United States. Ph: 1-877-4IESRPT • Fax: 909.472.4171 web: www.uniform-es.org • 4755 East Philadelphia Street, Ontario, California 91761-2816 – USA Page 1 of 7 BORAL ROOFING 7575 Irvine Center Drive, Suite 100 Irvine, California 92618 (949) 756-1605 www.BoralRoof.com CONCRETE ROOF TILES CSI Section: 07 32 16 Concrete Roof Tiles 1.0 RECOGNITION Boral Roofing Concrete Roof Tiles recognized in this report have been evaluated for use as concrete roof tiles. The weather resistance, wind uplift resistance and fire classification properties of the roof tiles comply with the intent of the provisions of the following codes and regulations: • 2018, 2015, 2012, 2009, and 2006 International Building Code® (IBC) • 2018, 2015, 2012, 2009, and 2006 International Residential Code® (IRC) • 2019 California Building Code (CBC) –Supplement attached • 2019 California Residential Code (CRC) – Supplement attached • 2020 Florida Building Code, Building (FBC, Building) – Supplement attached • 2020 Florida Building Code, Residential (FBC, Residential) – Supplement attached 2.0 LIMITATIONS Use of the Boral Roofing Concrete Roof Tiles recognized in this report is subject to the following limitations: 2.1 The roof tiles shall be manufactured, identified and installed in accordance with this report and the applicable code. In the event of a conflict this report governs. 2.2 Boral Roofing “concrete roof tile shall be installed on roof slopes of 2½ units vertical in 12 units horizontal (21- percent slope) or greater.” IBC Section 1507.3.2. 2.3 The supporting structure shall be designed to support the loads and is beyond the scope of this report. 2.4 The Concrete Roof Tiles recognized in this report are manufactured in Lake Wales, FL; Brookshire, TX; Phoenix, AZ; Henderson, NV; Okeechobee, FL, Rialto, CA; French Camp, CA; Henderson, CO and Lathrop, CA; Tables 2 A through 2 I describe the tiles produced at each location. 3.0 PRODUCT USE 3.1 General: Boral Roofing Concrete Roof Tiles shall be used as a roof covering in accordance with IBC Section 1503 or IRC Section 903, as applicable. 3.2 Installation: 3.2.1 Installation in accordance with the 2018 IBC or IRC: Boral Concrete Roof Tiles shall be installed in accordance with 2018 IBC Section 1507.3 or 2018 IRC Section R905.3, including the attachment requirements of 2018 IBC Section 1507.3.7 or 2018 IRC Section R905.3.7, as applicable. Underlayment shall conform to 2018 IBC Section 1507.1.1 or 2018 IRC Section R905.1.1. Installation of accessory tiles, EnviroPro® see section 4.1.1. 3.2.2 Installation in accordance with the 2015, 2012, 2009, or 2006 IBC or IRC: Boral Concrete Roof Tiles shall be fastened in accordance with the code specific requirements in Table 1 of this report using The Concrete and Clay Roof Tile Installation Manual for Moderate Climate Regions, dated July 2015, published by the Tile Roofing Institute and the Western States Roofing Contractors Association. The July 2015 TRI manual is associated with ER-2015 in the UES Evaluation Report Directory and available for download at www.uniform- es.org. Installation of accessory tiles, EnviroPro® see section 4.1.1. TABLE 1 – ATTACHMENT DESIGN Applicable Code Criteria for Applicability Design Information Location 2015 or 2012 IBC Ultimate Design Wind Speeds (Vult) ≤ 130 MPH and Mean Roof Height ≤ 60 feet Roof Tile Installation Manual & Table 1507.3.7 of the applicable IBC 2009 or 2006 IBC Basic Wind Speed (3 sec gust) ≤ 100 mph and Mean Roof Height ≤ 60 feet 2015, 2012, 2009 or 2006 IRC Mean Roof Height ≤ 40 feet Roof Tile Installation Manual & Section R905.3.7 For SI: 1 foot = 305 mm, 1 mph = 1.6 m/s 3.3 Anchoring: Boral Concrete Roof tiles may be anchored using mortar in accordance with the applicable building code and, where permitted, the TRI Manual or adhesively attached in accordance with the adhesive manufacturer’s research report issued by an approved evaluation service agency. Number: 412 Originally Issued: 07/31/2015 Revised: 03/29/2020 Valid Through: 07/31/2021 Page 2 of 7 4.0 PRODUCT DESCRIPTION Boral Roofing Concrete Roof Tiles comply with ASTM C1492 as required by Section 1507.3.5 of the IBC. The roof tiles are described by model, weight, dimensions, and tile factor in Tables 2 A through 2 I, for each of the production locations listed in Section 2.4 of this report. When installed in accordance with this report on minimum 15/32-inch-thick (12 mm) plywood solid sheathing or non-combustible decks, the assembly incorporating the roof tiles achieve an ASTM E108 Class A rating per Section 1505.2 of the IBC and Section R902.1 of the IRC, as applicable. Roof classifications for adhesively attached systems shall be in accordance with the adhesive manufacturer’s approved research report. 4.1 Accessories: Boral EnviroPro® recognized in this report has been evaluated for use as an accessory product to be used with concrete roof tiles. The weather resistance, wind uplift resistance and fire classification properties of the product complies with the intent of the provisions of the codes and regulations in Section 1.0 of this report. The Boral EnviroPro product is subject to all limitations in Section 2.0 of this report. The Boral EnviroPro product complies with ASTM C1492 as required by Section 1507.3.5 of the IBC. The Boral EnviroPro product is described by model, weight, dimensions, and tile factor in Tables 2 A through 2 I, for each of the production locations listed in Section 2.4 of this report. When installed in accordance with this report on minimum 15/32-inch-thick (12 mm) plywood solid sheathing or non- combustible decks, the assembly incorporating the Boral EnviroPro product achieves an ASTM E108 Class A rating per Section 1505.2 of the IBC and Section R902.1 of the IRC, as applicable. 4.1.1 Installation: The Boral EnviroPro accessory product shall be limited to installation where roof tiles must be cut, such as in valleys and boundary edges at rakes, walls, chimneys, skylights, and other roof openings and penetrations. The installed dry weight of Boral EnviroPro is equivalent to that of the tile profile in Tables 2A-2I with which it is used. 5.0 IDENTIFICATION Shipping pallets are identified with the report holder’s name (Boral Roofing), manufacturing address, product name, installed weight, inspection agency, and evaluation report number (ER-412). The Cedarlite 600, Madera 700 and Madera 900 tiles are imprinted on the top side of each tile with an “M”, all other field tiles are imprinted with the name “Boral”, “Boral Lifetile”, “Monierlifetile”, or the Boral Roofing, or MonierLifetile or “Vostile” or logo. The Boral EnviroPro product shall be clearly identified to provide distinction between field tiles and accessory tiles as stated in the EnviroPro product installation guidelines. The identification includes the IAPMO Uniform Evaluation Service Mark of Conformity. Either Mark of Conformity may be used as follows: or IAPMO UES ER-412 6.0 SUBSTANTIATING DATA Data in accordance with ICC-ES AC180, dated February 2012 (editorially revised March 2018), manufacturer’s descriptive literature and installation instructions. Test reports are from laboratories in compliance with ISO/IEC 17025. 7.0 STATEMENT OF RECOGNITION This evaluation report describes the results of research completed by IAPMO Uniform Evaluation Service on Boral Roofing Concrete Roof Tiles to assess conformance to the codes shown in Section 1.0 of this report and serves as documentation of the product certification. Products are manufactured at locations noted in Section 2.4 of this report under a quality control program with periodic inspection under the supervision of IAPMO UES. For additional information about this evaluation report please visit www.uniform-es.org or email us at info@uniform-es.org Number: 412 Originally Issued: 07/31/2015 Revised: 03/29/2020 Valid Through: 07/31/2021 Page 3 of 7 Table 2 B - Tiles Manufactured at Henderson, NV Tile Installed Dry Weight1 (psf) Dimemsions2 (inch) Tile Factor Length X Width TF (ft3) Ratio 1 Espana / Barcelona 9.0 17 X 123/8 1.470 1.045 Saxony 900 – Shake, Slate, Country Slate 9.1 17 X 13 1.533 1.090 For SI: 1 inch = 25.4 mm, 1 psf = 4.88 kg/m2 Table 2 C - Tiles Manufactured at Katy (Brookshire), TX Tile Installed Dry Weight1 (psf) Dimemsions2 (inch) Tile Factor Length X Width TF (ft3) Ratio 1 Barcelona – Impact 10.3 16½ X 13 1.444 1.027 Saxony – Country Shake, Country Slate, Country Split Shake, English Thatch 10.3 16½ X 13 1.392 0.989 Saxony – Impact 10.5 16½ X 13 1.392 0.989 Saxony – Shake, Slate 10.3 16½ X 13 1.392 0.989 Tejas Espana / Barcelona 9.0 16½ X 13 1.407 1.000 Villa 9.0 16½ X 13 1.407 1.000 For SI: 1 inch = 25.4 mm, 1 psf = 4.88 kg/m2 NOTES TO TABLES: 1. Used on a 3-inch head-lap. 2. Nominal dimension. Table 2 A - Tiles Manufactured at Denver (Henderson), CO Tile Installed Dry Weight1 (psf) Dimemsions2 (inch) Tile Factor Length X Width TF (ft3) Ratio 1 Saxony – Shake, Slate, Country Slate Split Old English Thatch 9.6 17 X 13 1.568 1.115 Saxony – Impact 10.5 17 X 13 1.568 1.115 Villa 900 9.0 17 X 13 1.503 1.068 Villa– Impact 10.1 17 X 13 1.503 1.068 For SI: 1 inch = 25.4 mm, 1 psf = 4.88 kg/m2 Number: 412 Originally Issued: 07/31/2015 Revised: 03/29/2020 Valid Through: 07/31/2021 Page 4 of 7 Table 2 D - Tiles Manufactured at Lake Wales, FL Tile Installed Dry Weight1 (psf) Dimemsions2 (inch) Tile Factor Length X Width TF (ft3) Ratio 1 Barcelona 900 9.5 17 X 13 1.525 1.084 Saxony 900 – Shake, Slate, Split Shake, Country Slate 9.5 17 X 13 1.545 1.098 Spanish “S” Nuevo 9.9 17 X 93/4 1.144 0.813 Villa 900 9.2 17 X 13 1.533 1.090 For SI: 1 inch = 25.4 mm, 1 psf = 4.88 kg/m2 Table 2 E - Tiles Manufactured at Lathrop, CA Tile Installed Dry Weight1 (psf) Dimemsions2 (inch) Tile Factor Length X Width TF (ft3) Ratio 1 Barcelona 900 9.3 17 X 13 1.509 1.073 Saxony 900 – Shake, Slate 9.1 17 X 13 1.533 1.090 For SI: 1 inch = 25.4 mm, 1 psf = 4.88 kg/m2 Table 2 F - Tiles Manufactured at Phoenix, AZ Tile Installed Dry Weight1 (psf) Dimemsions2 (inch) Tile Factor Length X Width TF (ft3) Ratio 1 Mission S / Barcelona 10.3 16½ X 13 1.494 1.062 Saxony – Shake, Slate 9.5 16½ X 13 1.494 1.062 Villa 9.0 16½ X 13 1.407 1.000 For SI: 1 inch = 25.4 mm, 1 psf = 4.88 kg/m2 Table 2 G - Tiles Manufactured at Okeechobee, FL Tile Installed Dry Weight1 (psf) Dimemsions2 (inch) Tile Factor Length X Width TF (ft3) Ratio 1 Bermuda 12.44 161/8 X 101/8 1.036 0.736 Estate “S” 7.9 16½ X 13 1.417 1.007 Galena Spanish “S” 9.3 17 X 10 1.144 0.831 Plantation 10.4 16½ X 13 1.426 1.014 Saxony 900 9.3 17 X 13 1.533 1.090 For SI: 1 inch = 25.4 mm, 1 psf = 4.88 kg/m2 NOTES TO TABLES: 1. Used on a 3-inch head-lap. 2. Nominal dimension. Number: 412 Originally Issued: 07/31/2015 Revised: 03/29/2020 Valid Through: 07/31/2021 Page 5 of 7 Table 2 H - Tiles Manufactured at Rialto, CA Tile Installed Dry Weight1 (psf) Dimemsions2 (inch) Tile Factor Length X Width TF (ft3) Ratio 1 Espana / Barcelona 9.0 17 X 123/8 1.454 1.033 Espana 600 / Barcelona 600 5.9 17 X 123/8 1.454 1.033 Saxony 600 - Slate, Shake, Split Shake 5.9 17 X 13 1.533 1.090 Saxony 700 – Slate, Shake, Split Shake 7.1 17 X 13 1.533 1.090 Saxony 900 - Slate, Shake, Country Shake 9.3 17 X 13 1.533 1.090 Villa 600 5.8 17 X 13 1.494 1.061 Villa 900 9.0 17 X 13 1.494 1.061 For SI: 1 inch = 25.4 mm, 1 psf = 4.88 kg/m2 Table 2 I - Tiles Manufactured at Stockton (French Camp), CA Tile Installed Dry Weight1 (psf) Dimemsions2 (inch) Tile Factor Length X Width TF (ft3) Ratio 1 Cedarlite 600 5.9 13½ X 13 0.942 0.673 Madera 700 7.2 13½ X 13 0.947 0.673 Madera 900 9.5 13½ X 13 0.947 0.673 Saxony 600 – Slate, Shake, Split Shake 5.7 17 X 13 1.525 1.084 Saxony 700 – Slate, Shake, Split Shake 7.2 17 X 13 1.525 1.084 Saxony 900 – Hartford Slate, Shake, Slate, Country Slate 9.1 17 X 13 1.533 1.090 Saxony 900 – Split Old English Thatch 9.8 17 X 13 1.525 1.084 Villa 600 6.0 17 X 13 1.494 1.115 Villa 900 9.3 17 X 13 1.494 1.115 For SI: 1 inch = 25.4 mm, 1 psf = 4.88 kg/m2 NOTES TO TABLES: 1. Used on a 3-inch head-lap. 2. Nominal dimension. Number: 412 Originally Issued: 07/31/2015 Revised: 03/29/2020 Valid Through: 07/31/2021 Page 6 of 7 CALIFORNIA SUPPLEMENT BORAL ROOFING 7575 Irvine Center Drive, Suite 100 Irvine, California 92618 (949) 756-1605 www.boralamerica.com CONCRETE ROOF TILES CSI Section: 07 32 16 Concrete Roof Tiles 1.0 RECOGNITION The Boral Concrete Roof Tiles and accessories evaluated in IAPMO UES ER-412 are satisfactory alternative roof covering materials in accordance with the following codes and regulations: • 2019 California Building Code (CBC) • 2019 California Residential Code (CRC) 2.0 PRODUCT USE 2.1 The Boral Roofing concrete roof tiles may be used as a Class A, B, or C roof covering systems complying with Sections 1505.1.1 of the CBC or R902.1.1 of the CRC; Sections 1505.1.2 of the CBC or R902.1.2 of the CRC; or Sections 1505.1.3 of the CBC or R902.1.3 of the CRC, respectively. The design and installation of the Boral Roofing concrete roof tiles shall be in accordance with Sections 1507.3.10 and 1513 CBC or Section 905.3 of the CRC, as applicable, and ER-412. 2.2 Roof Tiles shall be installed in accordance with Sections 3.0 and 4.0 of ER-412 except, where the building official requires conformance to the CBC or CRC, the following shall be substituted: 2.2.1 Underlayment shall conform with CBC Section 1507.1.1 or CRC Section 905.1.1. 2.2.2 Attachment of the concrete roof tiles shall be designed to resist wind loads according to CBC Sections 1507.3.7 and 1609.5 or CRC Section 905.3, as applicable. 2.3 Boral Roofing concrete roof tiles may be used in “new buildings located in any Fire Hazard Severity Zone or any Wildland-Urban Interface Fire Area designated by the enforcing agency constructed after the application date shall comply with the provisions” in accordance with Sections 701A.3 and 705A of the CBC, or Sections R337.1.3.1 and R337.5 of the CRC, as applicable, and with the IBC as presented in ER-412. 2.4 Boral Roofing concrete roof tiles used on structures regulated by the Division of the State Architect or the Office of Statewide Planning and Development are subject to installation provisions in CBC Section 1513. For additional information about this evaluation report please visit www.uniform-es.org or email us at info@uniform-es.org Number: 412 Originally Issued: 07/31/2015 Revised: 03/29/2020 Valid Through: 07/31/2021 Page 7 of 7 FLORIDA SUPPLEMENT BORAL ROOFING 7575 Irvine Center Drive, Suite 100 Irvine, California 92618 (949) 756-1605 www.boralamerica.com CONCRETE ROOF TILES CSI Section: 07 32 16 Concrete Roof Tiles 1.0 RECOGNITION The Boral Roofing concrete roof tiles and accessories evaluated in IAPMO UES ER-412 are a satisfactory alternative roof covering materials in accordance with to the following codes and regulations: • 2020 Florida Building Code, Building (FBC, Building) • 2020 Florida Building Code, Residential (FBC, Residential) 2.0 LIMITATIONS 2.1 Verification shall be provided that a quality assurance agency audits the manufacturers quality assurance program and audits the production quality of products, in accordance with Section (5)(d) of Florida Rule 61G20-3.008. The quality assurance agency shall be approved by the Commission (or the building official when the report holder does not possess an approval by the Commission). 2.2 Evaluation to the high-velocity hurricane zone provisions in Section 1512 of the FBC, Building and Chapter 44 of the FBC, Residential is beyond the scope of this report. 3.0 PRODUCT USE The design and installation of the Boral Roofing concrete roof tiles shall be in accordance with the 2018 International Building Code and the 2018 International Residential Code, as applicable, as noted in ER-412. The FBC, Building Section 1507.3 and FBC, Residential Section R905.3 states that the installation of the Boral Roofing concrete roof tiles “shall be in accordance with the requirements of the FRSA/TRI Florida High Wind Concrete and Clay Roof Tile Installation Manual, Sixth Edition where the Vasd is determined in accordance with” FBC, Building Section 1609.3.1, FBC-Residential Section R301.2.1.3, or the recommendations of RAS 118, 119 or 120. Load combinations shall be in accordance with Sections 1605.2 or 1605.3 of the FBC, Building, as applicable. Design wind loads shall be in accordance with Section 1609.5 of the FBC, Building or Section R301.2.1 of the FBC, Residential, as applicable. For additional information about this evaluation report please visit www.uniform-es.org or email us at info@uniform-es.org