HomeMy WebLinkAboutPRODUCT APPROVAL SPECIFICATION SHEETPRODUCT APPROVAL SPECIFICATION SHEET
As required by Florida Statute 553.842 and Florida Administrative Code 913-72, please provide the information and approval
numbers on the building components listed below if they will be utilized on the construction project for which you are applying
for a building permit. We recommend you contact your local product supplier should you not know the product approval
number for any of the applicable listed products. Statewide approved products are listed online at www.floridabuilding.org.
Category/Subcategory
1. EXTERIOR DOORS
Manufacturer
Product Description
Approval NUmber(s)
A. SWINGING
B. SLIDING
7-
C. SECTIONAUROLL UP
D. OTHER
2. WINDOWS
A. SINGLEIDOUBLE HUNG
B. HORIZONTAL SLIDER
C.CASEMENT
D. FIXED
E. MULLION
F. SKYLIGHTS
G. OTHER
3. PANEL WALL
A. SIDING
B. SOFFITS
C.STOREFRONTS
D. GLASS BLOCK
E. OTHER
4. ROOFING PRODUCTS
A. ASPHALT SHINGLES
1KO
Cambridge JO
NOA NO: 19-1112.02
B. NON-STRUCT METAL
C. ROOFING TILES
D. SINGLE PLY ROOF
E. OTHER
Stormshield
Ice and water protector
FL34896
LOmancoINC
Ridqe Vent
NOA NO: 19-1217.05
5. STRUCT COMPONENTS
A. WOOD CONNECTORS
B. WOOD ANCHORS
C. TRUSS PLATES
D. INSULATION FORMS
E. LINTELS
F. OTHERS
6. NEW EXTERIOR
A. ENVELOPE PRODUCTS
The products listed below did not demonstrate product approval at plan review. I understand that at the time of inspection of
these products, the following information must be available to the inspector on the jobsite; (1) copy of the product approval (2)
performance characteristics which the product was tested and certified to comply with (3) copy of the applicable manufacturer's
installation requirements. Further, I understand these products may have to be removed if approval cannot be demonstrated
during inspection. --;:r
Jason Armstrong
AUGUST 2021
DATE Plan 3 — Rev 8/15