HomeMy WebLinkAboutREVISION polyglass underlayment 2020 codeFlorida Building Code Online
Page 1 of 2
Business Professional r r
r
wis lMxrlp 1pgG lker pwiir xM WTOWrs Su0TR 5uKllage flats RFwc PUMka4onc Gntert Uc Bps Silo MaP LIM1W SeaKM1
db product Approval
pr
Prod: chic Pre
NM I.Uiiil > AL,Dk,11, le.:>Ap 11md a I
FL x FI5259-1131
Application Type Revision
Code Version 2020
Application Status Approved
Comments
Archived
Product Manufacturer POLYGLASS USA
Address/Phone/Enroll 1111 W. Newport Center Drive
Deerfield Beach, FL 33442
(954) 233-1330 Ext 242
ma Ipert0poly9lass.cam
Authorized Signature Maury Alpert
ma I pertopolyglass.com
Technical Representative TECH REP
Address/Phone/Email 1111 West Newport Center Drive
Deerfield Beach, FL 33442
(865) 802-8017
uspolyglasstechnical0polyglass.coca
Quality Assurance Representative QA REP
Address/Phone/Email 1111 West Newport Center Drive
Deerfield Beach, FL 33442
(888)410-1375
uspolyglasstechnical@POlygiass.=m
Category
Roofing
Subcategory
Underlayments
Evaluation Report from a Florida Registered Architect or a Licensed
Compliance Method
Florida Professional Engineer
Evaluation Report - Hardcopy Received
Florida Engineer or Architect Name who developed Robert Naminen
the Evaluation Report
Florida License
PE-59166
Quality Assurance Entity
UL LLC
Quality Assurance Contract Expiration Date
10/21/2022
Validated By
John W. Knezevich, PE
✓ Validation Checklist - Hardcopy Received
Certificate of Independence R31 CN 2'- - 'O'
NIEM1NEN pdf
Referenced Standard and Year (of Standard) Standowrur
ASTM D3970
2015
ASTM D226
2D09
ASTM D4798
2011
ASTM D6163
2015
ASTM 06164
2011
ASTM D6222
2011
ASTM D6509
2015
FM 4474
2D11
FRSA/TR1, Sixth Edition
2018
https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgvbSgAaZp3 Cr... 1 /20/2021
Florida Building Code Online
UL 1897
Equivalence of Product Standards
Certified By
Sections from the Cade
Product Approval Method Method 1 Option D
Date Submitted
10/22/2020
Date Validated
10/26/2020
Date Pending FBC Approval
11/01/2020
Date Approved
12/15/2020
Date Revised
12/21/2020
Summary of Products
Page 2 of 2
2015
FL x
Model, Number or
Description
Name
5259.1
Pclyglam PAO
Underk9atetts
floalling nadedaYnla M
Limits of Use
Approved for use in MVN2: No
Approved for use outside NVNL• Yes
Impact Resistant: N/A
Design Pressure: ♦N/q/-622.5
Installation Instructions
F152?�r2R31J.L »3r cc NDPRI AYMENTc Fl5259
R31.adf
Verified By: Robert Nleminen PE-59166
Created by Independent Third Party: Yes
Other: 1.) The design pressure in this
application relates to one parucuiar
Evaluation Reports
'L - R31 AE 2020 09 30 FINAL ER POLYGIASS UNDFRIAYMENTS FL5259-
R31.13df
Created by Independent Third Party: Yes
underiayrltent system far use in the mof
systems. Refer to ER Section 5.8.3 for
other systems and associated maximum
design pressures. 2.) Refer to ER
Section 5 for other limits of use.
0 ED
:gnlxtyr ::ic li3Go v sr1 -ia:C
this Rata d rbrHa h en MIB-0 ¢mpla/e[. rbdyn lw 200L2013 State iir ReidaQ: FRd,i. Su
. �"•Jiaw5tlltiohddt
Pa`una Su[emen[
Unhr, noble taw, lmeil a0tlrcssee ere puE4c rttecEe. ]f pV av nv[ wa:rc your ¢-mall ademab relaasetl In rtsponu tv a WNlortco[tls r¢auesi. Uo n W sene elMvnlr
[fill low, avary.Plsdhodw. Cruilb 1, 2, . Wbynatlalmds mhs,owo55. F a. YOt sin-s. two conlad 8W sim IJ95.'Vnauanl ie ho"'a5SP5
(t), , hp. Smtutes, er--it odeear 1, 2fi13, Ymnseas Omni fit—
under d wwi e55. 55, must pmvld took
winds. 11 you
d an email addrtss Ii tiles nave one. The
emna pall may M Stud W oakbl sows.,
atlas wan this I ho... Nw,md email aINlreaes art WtYfi remb. It ya¢ do not Msil m su. ape .I.S. adpress.
please pmntle Wa Uaplrtrnon[ MM en mail eoNass wnkll mn Ce moue avanabb ds:ne pW+lic. To Vetermine 1! you ww a 4mnsee uMer CTep{er 455, r.4., ukau
dick hr¢.
product APProral Aepspta:
=KI%Iu■
Credit Card
Sale
https;llwww.floridabuilding.org/pr/pr_app dtl.aspx?param=wGEVXQwtDgvbSgAaZp3Cr... 1/2012021
NEMD l etc.
Certljlcate of Authorization #31455
353 Christian Street, Unit #13
Oxford, CT 06478
(203)262-9245
ENGINEER EVALUATE TEST CONSULT
7N RFpnp
Polyglass USA, Inc. Evaluation Report 3m-PLYG.20-FBCER.A
1111 West Newport Center Drive FL5259-R32 (HVHZ)
Deerfield Beach, FL 33442 Date of Issuance:12/21/2020
(954)Z33-1330
SCOPE:
This Evaluation Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida. The documentation submitted has been reviewed by Robert Nieminen, P.E.
for use of the product under the Florida Building Code and Florida Building Code, Residential Volume. The products
described herein have been evaluated for compliance with the 7" Edition (2020) Florida Building Code sections noted
herein.
DESCRIPTION: Polyglass Roof Underlayments, for use in FBC HVHZ jurisdictions
LABELING: Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted herein
and FBC 1507.1.1.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s) changes, the referenced Quality
Assurance or production facility location(s) changes, or Code provisions that relate to the product(s) change. Acceptance of
our Evaluation Reports by the named client constitutes agreement to notify NEMD ETC, LLC of any changes to the product(s),
the Quality Assurance or the production facility location(s). NEMO ETC, LLC requires a complete review of its Evaluation Report
relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Florida Product Approval Number (FL#) preceded by the words "NEMOIetc. Evaluated" may be displayed
in advertising literature. If any portion of the Evaluation Report is displayed, then it shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or its
distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists of pages 1 through 11
Prepared by:
. • ..
Robert J.M. Nieminen, P.E.
Florida Registration No. 59166, Florida OCA ANE1983
=Pi: ; 7`•'
The facsimile seal appearing was authorized by Robert Nieminen, P.E.
on 12/21/2020. This does not serve as an electrunlcally signed
document.
CERTIFICATION OF INDEPENDENCE:
1. NEMO ETC, LLC does not have, not does it Intend to acquire or will it acq ulre, a financial interest in any company manufacturing or distributing
products it evaluates.
2. NEMO ETC, LLC is not owned, operated or controlled by any company manufacturing or distributing products It evaluates.
3. Robert Nieminen, P.E. does not have nor will acquire, a financial Interest In any company manufacturing or distributing products for which the
evaluation reports are being Issued.
4. Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved In the approval process of the product.
5. This is a building code evaluation. Neither NEMD ETC, LLC nor Robert Nieminen, P.E. are, in any way, the Designer of Record for any project on
which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless retained specifically for that
purpose.
®2019 NEMD ETC, LLC
04NEMOjetc.
ROOFING COMPONENT EVALUATION:
,•
Product Category:
Roofing
Sub -Category:
Underlayment
Compliance Statement: Roof Underlayments, as produced
by Polyglass USA, Inc., have demonstrated compliance with the
following
sections of the 7th Edition (2020) Florida Building Code through testing in accordance
with the following Standards.
Compliance
is subjectto the Installation Requirements and Limitations / Conditions of Use set forth herein.
STANDARDS:2.
Section
Properly
Standard
Year
RAS 115, TAS 110
Material standard
ASTM D226
2009
TA5110
Material standard
ASTM D1970
2015
TAS 110
Material standard
TAS103
2020
TA5110
Material standard
ASTM D6163
2015
TAS 110
Material standard
ASTM D6164
2011
TAS 110
Material standard
ASTM D6222
2011
TAS 110
Accelerated Weathering
ASTM 04799
2011
Ent"
Ealaminati m
Reference
DOW
Entity
Etamtnatlon
rice
Date
Ego (TST 6049)
TAS 1140)
11757.08.01-1
8/13/2001
NEMO (TST 60491
ASTM 01970
4-PLYG-18-00403.18
3/29/2018
END (TST 60491
TAS 1141C)
P3740.01.07
1/4/2007
NEMO (TST 6049)
ASTM 0I623, TAS 103
45-I0-18-001.07.18-R1
7/23/2018
ERD(T5T6049)
ASTM D3623, TAS 103
P13030.11.09-1
11/30/20M
NEMO ITST 60491
ASTM D6163
4S-PLYG-18-002.01.19-A
1/24/2019
END [TST 6049)
TAS Will)/TAS 114(C)
P11030.11.09.2
11/30/2009
NEMO (TST 60491
ASTM D6222
4S-PLYG-18.002A5-19-C
5/20/2019
END (TST 6049)
ASTM C4977/ TAS 103
P11030.11(19-3
11/30/2OD9
NEMO ITST 50491
TA5103
4S-PLYG-184l04.10.19-G
10/8/1019
END (Tar 60491
ASTM D1970, D4798
P373DO.10.11
10/19/2011
MEMO ITST 604%
TAS103
4SPLYG-18.004.10.19-1
10/8/2019
ENO ITST 60491
TAS103
P40390.08.12-1
8/6/2012
NEMO(T6T 6049)
TAS103
4S-PLYG-18-004.10.19-L
10/9/2019
END (TST 60491
ASTM 01623, TAS 103
P40390.08.12-2
8/7/2012
NEMO(TST6049)
TAS103
4SPLYG-18-004.12.19-F
12/29/20A
END M6049)
ASTM 01623, TAS 103
C41420.09.12-3
9/11/2012
NEMO (TST 5049)
TAS103
4j-PLYG-I9-SS1JDL-02.A
IX2020
ERDITST6049)
ASTM D65M
P37590.03.13-1-R1
2/5/2013
NEMO ITST EMS)
ASTM D3970, 04798
45.PLYG-18-004.01.20.H
1/14/2020
END (TST 6049)
TAS 1140)
P39680.03.13
3/4/2013
NEMO (r5T 60491
ASTM 01970, 04798
48-PLYG-IB-0W.01.20.8
1/14/2020
ENO TST 6049)
ASTM D6164
P37590.03.13-3A
3/6/2013
NEMO (TST 6D49)
TAS 103 (tile slippagel
4SPLYG-18-004.01.20.A
1/16/2020
END 1157 60491
ASTM D6164
P37590.07.13-1
7/2/2013
NEMO ITST 6049)
ASTM 06164
45-PLY&I"04.01.20.8
1/16/2020
Ego(m 6049)
ASTM D4602
P45940.09.13
9/4/2013
NEW ITST 6049)
TAS 103
PLYG.SC35855.05.20A
5/29/2020
END PsT 6049)
ASTM DI623. TAS 103
P45270.05.14
5/12/2014
NEMO ITST 60491
TAS 103
4j-PLYG-20-SSUDL-M
7/6/2020
END (TST 60491
ASTM D1623, TAS103
6020.09.146
9/8/2014
NEMO ITST 6049)
ASTM O6R2
4q-PLYG-I9-SSNffl A
7/23/2020
END (TST 60491
TAS103
P443611W.14111
10/7/2014
NEMO ITST 60491
ASTM D4798,D3623
4j-PLYG-I9-SSUDL-05.A
9/30/2020
Ego (TST ONE)
ASTM D3970, 04798
P43290.10.14
10/17/2014
NEMO ITST 6G49)
ASTM D1970
4j-PLYG-20-SSUDL-05.A
9/30/2020
END (TST 6049)
TA5114I11
P39680.03.13
3/4/2013
NEMO ITST 60491
TAS103
41-PLYG-20-SSUDL-OS.0
9/30/2020
END ITST 6049)
ASTM D3970,04798
PLYG-SC10130.05.16.1
6/27/2016
NEMO ITST Gods)
TAS 103
4j-PLYG-20-SSUOL-11.A
10/21/2020
END (TST 6049)
ASTM D3623, TAS 103
PLYG-SC10130.06.162
6/27/2016
NEMO UST 60491
ASTM D397D, D4798
45-PLYG-I9-004.12.19.0
10/27/2020
END ITST 60491
TAS 103
PLYG-SC10130.06.15-3
6/27/2016
NEMO ITST 60491
ASTM 01623, TAS 103
4p-ICP-20-SSLAP-01.A
12/15/2020
ENDfST 6049)
TAS 103 (Vie slippage)
PLYG-SC33040.12.16
12/27/2016
ULIQUA9625)
Quality Control
Service ConOrmatlon(FL)
09/13/2018
END (TST 60491
TAS 103(tile slippage)
PLYG-SC32115.08.17
8/8/2017
UL IQUA96251
Quality Control
Service ConFlrmatlon(TX)
11/07/200
END (TST Ems)
TASI03
PLYG-SC13035.08.17
10/31/2017
UL(QUA9625)
Quality Control
Florida 8CI5
Current
NEMO ETC, U.C. Evaluation Report 3m-PLYG-2G-FHCER.A
Cernhcme of Authorization n32455 7" EDITION(20201 FFIC HVHZ EVALUATION FL5ZS9-R32(HVHZ)
P0lyg12ss Roof Underlayments Revision 28: 12/21/2020
Page 2 of 12
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
4.10
4.11
4.12
4,13
4.14
5.1
5.2
5.3
5.4
NNEMOletc.
PRODUCT DESCRIPTION
Product
Material Standard
Plant(s)
Description
Elastobase
ASTM D6163
FL
Fiberglass -reinforced, SBS modified bitumen base sheet
Elastobase P
ASTM D6164
FL
Polyester -reinforced, SBS modified bitumen base sheet
Elastoflex S6 G
ASTM D6164
FL, PA
Polyester -reinforced, SBS modified bitumen cap sheet
TAS 103 (partial)
Elastoflex S6 G FR
ASTM 06164
FL
Polyester -reinforced, SBS modified bitumen cap sheet
TAS 103 (partial)
Polyflex G
ASTM D6222
FL
Polyester -reinforced, APP modified bitumen cap sheet
TAS 103 (partial)
Polyflex G FR
ASTM D6222
FL
Polyester -reinforced, APP modified bitumen cap sheet
TAS 103 (partial)
Polyflex SA P
ASTM D6222
FL, TX
Polyester -reinforced, APP modified bitumen cap sheet
TAS 103 (partial)
Polyflex SA P FR
ASTM D6222
FL, TX
Polyester -reinforced, APP modified bitumen cap sheet
TAS 103 (partial)
Polystick IR-Xe
ASTM D1970
FL, PA, TX
Nominal 60-mil thick rubberized asphalt waterproofing
membrane, glass fiber reinforced, with an aggregate surface
Polystick MTS Plus
ASTM D1970
FL, NV, PA,
Nominal 60-mil thick rubberized asphalt waterproofing
TAS 103
TX
membrane, glass fiber reinforced, surfaced with poly -film
surface
Polystick TU Max
ASTM D1970
FL, PA, TX
Nominal 60-mil thick rubberized asphalt waterproofing
TAS 103
membrane with a 190 g/m2 polyester fabric surface
PolystickTU P
TAS 103
FL, PA, TX
Nominal 130-mil thick rubberized asphalt waterproofing
membrane, glass-fiber/polyester reinforced, with a granular
surface
,PohistickTU Plus
ASTM D1970
FL, PA, TX
Nominal 80-mil thick rubberized asphalt waterproofing
TAS 103
membrane, glass fiber reinforced, with a polyester fabric
surface
ASTM D1970
NV, TX
Nominal 80-mil thick rubberized asphalt waterproofing
rPolystickR
TAS 103
membrane, glass fiber reinforced, surfaced with a textured
film surface
This is a Building Code Evaluation. Neither NEMO ETC, LLC nor Robert Nleminen, P.E. are, In any way, the Designer of Record
for any project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance
unless retained specifically for that purpose.
This Evaluation Report is not for use in FBC Non -High Velocity Hurricane Zone jurisdictions (i.e., outside of Broward and Miami -
Dade Counties).
This Evaluation Report pertains to above -deck roof components. Roof decks and structural members shall be in accordance
with FBC requirements to the satisfaction of the Authority Having Jurisdiction.
This Evaluation Report does not include evaluation of fire classification. Refer to FBC 1516 for requirements and limitations
regarding roof assembly fire classification. Refer to FBC 2603 for requirements and limitations concerning the use of foam
plastic Insulation.
NENIO ETC, U.C. Evaluation Report 3m-PLYG-20-FBCER.A
Cert)fkvte of Authorimtian#32455 7- EDITION(2020) FBC HVHZ EVALUATION FL5259-R32 (HVHZ)
Polyglass Roof Underlaymerns Revision 28: 12/21/2020
Page 3 of 11
NNEMOjetc.
5.5 Polyglass Roof Underlayments may be used with any prepared roof cover where the product is specifically referenced within
FBC approval documents. If not listed, a request may be made to the Authority Having Jurisdiction for approval based on this
evaluation combined with supporting data for the prepared roof covering.
5.6 Allowable Roof Covers:
TABLE S: ROOF COVER OPTIONS
FBCSecdon:
TAS 110(SIO),
TASI10(S31),
RAS I33
TAS 110(511)
945130
RAS 11S
RAS 118,I19&120
Asphalt
Clay and Concrete Tile
Metal
Slate or Slate-
Wood
Mechanlcal Attach
Adhesive -Set
Underlayment
Shingles
Type Shingles
Yes
Yes
Yes
Yes
Yes
Yes
Elastobase
lAhernateto
(as Base sheet,
(as Base Sheet,
(Alternateto
IAltefwte to
(Altemate to
D226, Type Ip
See 5.8)
See 5.8)
D226, Type II)
D226, Type II)
D226, Type 11)
Yes
Yes
Yes
yes
Yes
Yes
ElastobaseP
(Altemate to
las Base Sheet,
(as Base Sheet,
(Menlatet.
(Alternate to
(Altemate to
D22G.Twell)
See 5.91
See 5.8)
D226,Typell)
0226, Type ll)
D226, Type 11)
Elastoflex S6G
No
Yes
Yes
No
No
No
Elastoflex S6 G FR
No
Yes
No
No
No
No
PolyflexG
No
Yes
Yes
(see5.6.i)
No
No
No
Polyflex G FR
No
Ves
No
No
No
No
Polyflex SAP
No
Yes
Yes 15ee 5.6.11
No
No
No
Polyflex SA P FR
No
Yes
No
No
No
No
Polystick IR-Xe
yes
No
No
No
Yes
Yes
Polystick MTS Plus
Yes
Yes
No
Yes
Yes
Yes
PolystickTU Max
No
Yes
Yes
(see 5.6.11
Yes
No
Yes
PolTUP
No
Yes
No
No
No
Yes
UPystick
Polystick Tlus
Yes
Yes
Yes (Sees 6.1)
Yes
Yes
Yes
Polystick XFR
Yes
Yes
No
Yes
Yes
Yes
5.6.1 Adhesive -set the is limited to use of the following underlayment / tile -adhesive combinations.
TABLE SA: ALLOWABLE UNDERLAYMENT / TILE -ADHESIVE COMBINATIONS'
Undedayment
Adhesive
Florida Product
Approval
Polystick TU Max or PolystickTU Plus
DAP Foam "Touch In Seal
StormBond Roof Tile Adhesive"
NOA 20-0309.05
Dupont °Tile Bond"' Roof Tile
FL22525
PolystickTU Max or Polystick TU Plus
Adhesive'
Elastoflex S6 G, Polyflex G, Polyflex SA P, Polystick TU Max or Polystick TU
ICP Adhesives and Sealants
NOA 17-0322.03
Plus
"Polyset® AH-160"
Polystick TU Max or PolystickTU Plus
ICP Adhesives and Sealants
"Polysete RTA-1"
NOA 18-0131.02
J Refer to Tile Manufacturer's or Adhesive Manufacturers Florida Product Approval for Overturning Moment Resistance Performance
NEMO ETC, LLC. Evaluation Report 3m-PLYCa-20-FBCER.A
Cerdficote ofAuthpr(cadon C32455 7- EDITION(2020) FBC HVHZ EVALUATION FL5259-R32(HVH2)
Polyglass Roof Undedayments Revision 28: 12/21/2020
Page 4 of 11
5.7
5.8
5.9
5.10
NNEMO I etc.
Allowable Substrates:
TABLE 2: SUBSTRATE OPTIONS FOR ADHERED UNDERLAYMENTS
Substrates (designed to meet wind loads for project)
Substrates
Underlayment
Application
Primer
Material(s)
Polystick IR-Xe, Polystick MTS Plus,
Deck
ASTM 041
1 structural concrete
Polystick TU Max, Polystick TU P,
self -adhering
Polystick TU Plus, Polystick XFR,
Base Sheet
N/A
ASTM D226, Type II felt, Elastobase, Elastobase P
Polyflex SA P or Polyflex SA P FR
Elastoflex S6 G or Elastoflex S6 G
Deck
ASTM 041
structural concrete
FR
hot asphalt
Base Sheet
N/A
ASTM D226, Type II felt, Elastobase, Elastobase P
Deck
ASTM D41
structural Concrete
Polyflex G or Polyflex G FR
torch -applied
Base Sheet
N/A
Elastobase, Elastobase P
Attachment Limitations:
Refer to Section 6
Fx❑osure Limitations:
TABLE 3: EXPOSURE LIMITATIONS
Underlayment
Prepared Roof Cover
Installation Type
Maximum
Exposure (days)
Elastobase, Elastobase P, Polyglass G2 Base or Polyglass Base
Mechanically attached
30
Polystick IR-Xe
Mechanically attached
90
Polystick MTS Plus, Polystick TU Max, Polystick TU P, Polystick TU Plus or Polystick
XFR
Any type (per Table 1)
IRO
Elastoflex 56 G, Polyflex G or Polyflex SA P
Adhesive -set tile roof system
ISO
Elastoflex S6 G, Elastoflex S6 G FR, Polyflex G, Polyflex G FR, Polyflex SA P or
Polyflex SA P FR
Mechanically attached
UNLIMITED
Tile Slippage Limitations: When loading roof tiles on the underlayment in direct -deck tile roof assemblies, the maximum roof
clnne shall be as follows. These slope limitations can only be exceeded by using battens during loading of the roof tiles.
TABLE 4: TILE SLIPPAGE LIMITATIONS FOR DIRECT -DECK TILE INSTALLATIONS
Underlayment
Tile Profile
Staging Method
Maximum Staging Slope
Elastoflex S6 G or 56 G FR
Flat or Lugged
6-tile stack (4 over 2)
Prohibited without battens
Polyflex G or G FR
Flat or Lugged
6-tile stack (4 over 2)
4:12
Polyflex SA P or SA P FR
Flat or Lugged
6-tile stack (4 over 2)
4:12
Polystick M75 Plus
Flat
6-tile stack (4 over 21
5:12
Lugged
6-tile stack (4 over 2)
4:12
Polystick TU Max
Flat
6-tile stack (4 over 2) or 10-tile stack
7:12
Lugged
6-tlle stack (4 over 2)
7:12
Lugged
10-tlle stack
6:12
Polystick TU P
Flat or Lugged
6-tile stack (4 over 2)
7:12
Polystick TU Plus
Flat or Lugged
6-tile stack (4 over 2)
7:12
Flat or Lugged
TO tile stack
612
Polystick XFR
Flat or Lugged
Prohibited without battens
Prohibited without battens
NEW ETC, LLC Evaluation Report 3m-PLYO-20•FBCER.A
Certii icote of Authorizabon#32455 1" EDITION (2020) FBC HVNZ EVALUATION FLS2S9-R32 (HVHZ)
Polyglass Roof Underhyments Revision 20: 12/21/2020
Page 5 of 12
ONEMOletc.
6.1 Polyglass Roof Underlayments shall be installed in accordance with Polyglass published installation instructions subject to
the Limitations set forth in Section 5 herein and the specifics noted below.
6.2 Re -fasten any loose decking panels, and check for protruding nail heads. Sweep the substrate thoroughly to remove any dust
and debris prior to application, and prime the substrate (if applicable).
6.3
6.3.1
6.3.2
Approved Assemblies:
Deck Type 1: Wood Non -Insulated
nor4 nacrrintinn Min. 19/12" olvwood or wood plank
System Type E: Underlayment mechanically fastened to deck
Underlayment: One or more plies of Elastobase or Elastobase P with a minimum 4-inch side lap and 6-Inch end lap,
Fastening:
Surfacing:
mechanically fastened to deck.
FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5), 6-inch o.c. at the lap -edges and 12-inch o.c.
in a grid -pattern between the overlaps.
FBC HVHZ Approved asphalt shingles, metal panels, metal shingles, slate, slate -type shingles, wood
shakes or wood shingles.
Deck Type 1:
Wood, Non -Insulated
Deck Description:
Min.19/32" plywood or wood plank
System Type E:
Base sheet mechanically fastened to deck; underlayment adhered to base sheet
Base Sheet:
One or more plies of Elastobase, Elastobase P or FBC HVHZ Approved ASTM D226, Type 11 felt with a
minimum 4-inch side lap and 6-Inch end lap, mechanically fastened to deck.
Fastening:
FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5), 6-inch o.c. at the lap -edges and 12-inch o.c.
in a grid -pattern between the overlaps.
Cap Ply:
Elastoflex 56 G applied in hot asphalt or
Polyflex G torch -applied or
Polyflex SA P, self -adhering
and back -nailed max. 12-inch c.c. using FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5).
Surfacing:
FBC HVHZ Approved mechanically attached or adhesive -set tile roof system. Refer to Table 1A for
allowable tile adhesives and Table 4 for the stagging limitations.
6.3.3 1
Deck Type 1:
Wood, Non -Insulated
Deck Description:
Min.19/32" plywood or wood plank
System Type E:
Base sheet mechanically fastened to deck; underlayment adhered to base sheet
Base Sheet:
one or more plies of Elastobase, Elastobase P or FBC HVHZ Approved ASTM D226, Type II felt with a
minimum 4-inch side lap and 6-inch end lap, mechanically fastened to deck.
Fastening:
FBC HVHZApproved nails and tin caps (FBC HVHZ 1517.5), 6-inch o.c. atthe lap -edges and 12-inch o.c.
in a grid -pattern between the overlaps.
Cap Ply:
Elastoflex 56 G FR applied in hot asphalt or
Polyflex G FR torch -applied or
Polyflex SA P FR or Polystick TU P, self -adhering
and back -nailed max. 12-inch o.c. using FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5).
Surfacing: FBC HVHZ Approved mechanically attached the roof system. Refer to Table 4 for tile stagging
limitations.
NEMO ETC, LLC. Evaluation Report 3m-PLYG-2048CER.A
f dff .o, o/Aurh06,oHon#32455 7" EDITION 120201 FBC HVHZ EVALUATION FL5259-R321HVHZI
Polyglass Roof Undedayments Revision 28: 12/21tWZ0
Page 6 of 11
6.3.4
6.3.5
6.3.6
ONEMOjetc.
Deck Description:
Min. 19/32" plywood or wood plank
System Type E:
Base sheet mechanically fastened to deck; underlayment adhered to base sheet
Base Sheet:
One or more plies of Elastobase, Elastobase P or FBC HVHZ Approved ASTM D226, Type II felt with a
minimum 4-inch side lap and 6-inch end lap, mechanically fastened to deck.
Fastening:
FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5), 6-Inch o.c. atthe lap -edges and 12-inch o-c.
In a grid -pattern between the overlaps.
Cap Ply:
Polystick IR-Xe self -adhering and back -nailed max. 12-inch o.c. using FBC HVHZApproved nails and tin
caps (FBC HVHZ 1517.5).
Surfacing:
FBC HVHZ Approved asphalt shingles, slate, slate -type shingles, wood shakes or wood shingles.
Deck Type 1:
Wood, Non -Insulated
Deck Description:
Min. 19/32" plywood or wood plank
System Type E:
Base sheet mechanically fastened to deck; underlayment adhered to base sheet
Base Sheet:
One or more plies of Elastobase, Elastobase P or FBC HVHZ Approved ASTM D226, Type II felt with a
minimum 4-inch side lap and 6-inch end lap, mechanically fastened to deck.
Fastening:
FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5), 6-inch o.c. at the lap -edges and 12-inch o.c.
in a grid -pattern between the overlaps.
Base Ply:
(Optional) Polystick MTS Plus or Polystick XFR, self -adhering and back -nailed max. 12-inch o.c. using
FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5)
Cap Ply:
Polystick MTS Plus or Polystick XFR, self -adhering and back -nailed max. 12-inch o.c. using FBC HVHZ
Approved nails and tin caps (FBC HVHZ 1517.5).
Surfacing:
FBC HVHZ Approved asphalt shingles, mechanically attached tile roof system, metal panels, metal
shingles, slate, slate -type shingles, wood shakes or wood shingles. Refer to Table 4 for tile stagging
limitations.
Deck Description:
Min. 19/32" plywood or wood plank
System Type E:
Base sheet mechanically fastened to deck; underlayment adhered to base sheet
Base Sheet:
One or more plies of Elastobase, Elastobase P or FBC HVHZ Approved ASTM D226, Type II felt with a
minimum 4-inch side lap and 6-inch end lap, mechanically fastened to deck.
Fastening:
FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5), 6-Inch o.c. at the lap -edges and 12-Inch o.c.
in a grid -pattern between the overlaps.
Base Ply:
(Optional) Polystick MTS Plus or Polystick XFR, self -adhering and back -nailed max. 12-inch o.c. using
FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517-5)
Cap Ply:
Polystick TU Max, self -adhering and back -nailed max.12-inch o.c, using FBC HVHZ Approved nails and
tin caps (FBC HVHZ 15175).
Surfacing:
FBC HVHZApproved mechanically attached tile roof system, metal panels, metal shingles, wood shakes
orwoodshingles, Refer to Table 4 for tile stagging limitations.
NEMO ETC, LLC. Evaluation Report 3m-PLYG-2D-F9CER.A
Certificme ofAurhala flon #32455 7T" EDITION 120201 FOC HVHZ EVALUATION FL5259-1132 (HVHZI
Polyglaw Roof Underlayments Revision 28: 12/21/2020
Page 7 of 11
ONEmojetc.
6.3.7 Deck Type 1: Wood, Non -Insulated
Deck Description: Min. 19/32" plywood or wood plank
System Type E: Base sheet mechanically fastened to deck; underlayment adhered to base sheet
Base Sheet: One or more plies of Elastobase, Elastobase P or FBC HVHZ Approved ASTM D226, Type II felt with a
minimum 4-inch side lap and 6-inch end lap, mechanically fastened to deck.
Fastening: FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5), 6-inch o.c. at the lap -edges and 12-inch D.C.
in a grid -pattern between the overlaps.
Base Ply: (Optional) Polystick MTS Plus or Polystick XFR, self -adhering and back -nailed max. 12-inch D.C. using
FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5)
Cap Ply: Polystick TU Plus, self -adhering and back -nailed max. 12-inch D.C. using FBC HVHZ Approved nails and
tin caps (FBC HVHZ 1517.5).
Surfacing: FBC HVHZ Approved asphalt shingles, mechanically attached tile roof system, metal panels, metal
shingles, wood shakes or wood shingles. Refer to Table 4 for tile stagging limitations.
6.3.8 Deck Type 1: Wood, Non -Insulated
Deck Description: Min. 19/32" plywood or wood plank
System Type E: Base sheet mechanically fastened to deck; underlayment adhered to base sheet
Base Sheet: One or more plies of Elastobase, Elastobase P or FBC HVHZ Approved ASTM D226, Type II felt with a
minimum 4-inch side lap and 6-inch end lap, mechanically fastened to deck.
Fastening: FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5), 6-inch o.c. at the lap -edges and 12-inch D.C.
in a grid -pattern between the overlaps.
Base Ply: (Optional) Polystick MTS Plus, self -adhering and back -nailed max. 12-Inch D.C. using FBC HVHZ
Approved nails and tin caps (FBC HVHZ 1517.5)
Cap Ply: Polystick TU Max or Polystick TU Plus, self -adhering and back -nailed max. 12-inch o.c. using FBC HVHZ
Approved nails and tin caps (FBC HVHZ 1517.5).
Surfacing: FBC HVHZ Approved adhesive -set the roof system. Refer to Table 1A for allowable tile adhesives and
Table 4 for tile stagging limitations.
6.3.9 Deck Type 1: Wood, Non -Insulated
Deck Description: Min. 19/32" plywood or wood plank
System Type E: Base sheet mechanically fastened to deck; underlayment adhered to base sheet
Base Sheet: One or more plies of Elastobase or Elastobase P with a minimum 2-inch side lap and 6-inch end lap,
mechanically fastened to deck.
Fastening: Simplex MAXX Cap Fastener (NOA 16-3.227.05), 9-inch D.C. at the lap -edges and 18-inch D.C. in two (2)
equally spaced, staggered center rows.
Cap Ply: Elastoflex S6 G applied in hot asphalt or
Polyflex G torch -applied
and back -nailed max. 12-inch D.C. using FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5).
Surfacing: FBC HVHZ Approved mechanically attached or adhesive -set tile roof system. Refer to Table SA for
allowable tile adhesives and Table 4for tile stagging limitations.
NENIO ETC, I.I.C. Evaluation Report 3m-PLYG-20-FBCER.A
C &Ifk t, of Authcvawr.n#32455 7'" EDITION 120201 FBC HVHZ EVALUATION FL5259-R32 )HVHZ)
Polyglass Roof Underlayments Revision 28: 12/21/2020
Page 9 of 11
6.3.10
6.3.11
63-12
fONEMOjetc.
Deck Type 1: Wood, Non -Insulated
Deck Description: Min. 19/32" plywood or wood plank
System Type E: Base sheet mechanically fastened to deck; underlayment adhered to base sheet
Base Sheet: One or more plies of Elastobase or Elastobase P with a minimum 3-inch side lap and 6-inch end lap,
mechanically fastened to deck.
Fastening: Simplex MAXX Cap Fastener (NOA 18-1227.05), 8-inch o.c. at the lap -edges and 8-inch o.c. in three (3)
equally spaced, staggered center rows.
Primer: PG100 or ASTM D41 primer applied to stress plates
Cap Ply: Polyflex SA P, self -adhering and back -nailed max.12-inch o.c. using FBC HVHZ Approved nails and tin
caps (FBC HVHZ 1517.5).
Surfacing: FBC HVHZ Approved mechanically attached or adhesive -set tile roof system. Refer to Table 1A for
allowable tile adhesives and Table 4 for tile stagging limitations.
Deck Type 1:
Wood, Non -Insulated
Deck Description:
Min. 19/32" plywood or wood plank
System Type E:
Base sheet mechanically fastened to deck; underlayment adhered to base sheet
Base Sheet:
One or more plies of Elastobase or Elastobase P with a minimum 2-Inch side lap and 6-inch end lap,
mechanically fastened to deck.
Fastening:
Simplex MAXX Cap Fastener (NOA 18-1227.05), 9-Inch o.c. at the lap -edges and 18-Inch o.c. in two (2)
equally spaced, staggered center rows.
Cap Ply:
Elastaflex S6 G FR applied in hot asphalt or
Polyflex G FR torch -applied
and back -nailed max. 12-inch o.c. using FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5).
Surfacing:
FBC HVHZ Approved mechanically attached tile roof system. Refer to Table 4 for tile stagging
limitations.
Deck Type 1:
Wood, Non -Insulated
Deck Description:
Min. 19/32" plywood or wood plank
System Type E:
Base sheet mechanically fastened to deck; underlayment adhered to base sheet
Base Sheet:
One or more plies of Elastobase or Elastobase P with a minimum 3-inch side lap and 6-inch end lap,
mechanically fastened to deck.
Fastening:
Simplex MAXX Cap Fastener (NOA 18-1227.05), 8-inch o.c. at the lap -edges and 8-Inch o.c. In three (3)
equally spaced, staggered center rows.
Primer:
PG100 or ASTM D41 primer applied to stress plates
Cap Ply:
Polyflex SA P FR or Polystick TU P, self -adhering, self -adhering and back -nailed max. 12-inch o.c. using
FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5).
Surfacing:
FBC HVHZ Approved mechanically attached tile roof system. Refer to Table 4 for tile stagging
limitations.
NENIO ETC, LLC. Evaluation Report 3m-PLYG-20-FBCER.A
Cerrlfi oe aj Aurnoroatlon 932455 V" EDITION (2020) FBC HVHZ EVALUATION FL5259-R32 (HVHZ)
Polyglass Roof Underlayments Revision ZS: 12/21/2020
Page 9 of 11
ONEMOjetc.
6.3.13 Deck Type 1: Wood, Non -Insulated
Deck Description: Min. 19/32" plywood or wood plank
System Type E: Base sheet mechanically fastened to deck; underlayment adhered to base sheet
Base Sheet: One or more plies of Elastobase, Elastobase P felt with a minimum 3-inch side lap and 6-inch end lap,
mechanically fastened to deck.
Fastening: Simplex MAXX Cap Fastener (NOA 18-1227.05), 8-inch D.C. at the lap -edges and 8-inch D.C. in three (3)
equally spaced, staggered center rows.
Primer: PG100 or ASTM D41 primer applied to stress plates
Base Ply: (Optional) Polystick MTS Plus or Polystick XFR, self -adhering and back -nailed max. 12-inch D.C. using
FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5)
Cap Ply: Polystick MTS Plus or Polystick XFR, self -adhering and back-nalled max. 12-inch D.C. using FBC HVHZ
Approved nails and tin caps (FBC HVHZ 1517.5).
Surfacing: FBC HVHZ Approved asphalt shingles, mechanically attached tile roof system, metal panels, metal
shingles, slate, slate -type shingles, wood shakes or wood shingles. Refer to Table 4 for tile stagging
limitations.
6.3.14 r Deck Type 1: Wood, Non -Insulated
Deck Description: Min. 19/32" plywood or wood plank
System Type E: Base sheet mechanically fastened to deck; underlayment adhered to base sheet
Base Sheet: One or more plies of Elastobase, Elastobase P or FBC HVHZ Approved ASTM D226, Type II felt with a
minimum 4-inch side lap and 6-inch and lap, mechanically fastened to deck.
Fastening: Simplex MAXX Cap Fastener (NOA 18-1227.05), 8-inch D.C. at the lap -edges and B-inch D.C. in three (3)
equally spaced, staggered center rows.
Primer: PG100 or ASTM D41 primer applied to stress plates
Base Ply: (Optional) Polystick MTS Plus or Polystick XFR, self -adhering and back -nailed max. 12-inch D.C. using
FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5)
Cap Ply: Polystick TU Max, self -adhering and back -nailed max. 12-Inch o.c. using FBC HVHZ Approved nails and
tin caps (FBC HVHZ 1517.5).
Surfacing: FBC HVHZApproved mechanically attached tile roof system, metal panels, metal shingles, wood shakes
orwoodshingles. Refer to Table 4 for tile stagging limitations.
6.3.15 Deck Type 1: Wood, Non -Insulated
Deck Description: Min. 19/32" plywood or wood plank
System Type E: Base sheet mechanically fastened to deck; underlayment adhered to base sheet
Base Sheet: One or more plies of Elastobase, Elastobase P or FBC HVHZ Approved ASTM D226, Type It felt with a
minimum 4-Inch side lap and 6-inch end lap, mechanically fastened to deck.
Fastening: Simplex MAXX Cap Fastener (NOA 18-1227.05), 8-inch D.C. at the lap -edges and 8-inch D.C. in three (3)
equally spaced, staggered center rows.
Primer: PG100 or ASTM D41 primer applied to stress plates
Base Ply: (Optional) Polystick MTS Plus or Polystick XFR, self -adhering and back-nalled max. 12-inch D.C. using
FBC HVHZ Approved nails and tin caps (FBC HVHZ 1517.5)
Cap Ply: Polystick TU Plus, self -adhering and back -nailed max. 12-inch D.C. using FBC HVHZ Approved nails and
tin caps (FBC HVHZ 1517.5).
Surfacing: FBC HVHZ Approved asphalt shingles, mechanically attached tile roof system, metal panels, metal
shingles, wood shakes or wood shingles. Refer to Table 4 for tile stagging limitations,
NEMO ETC, U.C. Evaluation Report 3m-PLYG-20-FBCER.A
Certificate oJAu[earizo[ion 032455 7T" EDITION (2020) FBC HVHZ EVALUATION FL52511132 )HVHZ)
Polyglass Roof Underlayments Revision 28: 12/21/2020
Page 10 of 11
NNEMO etc.
6-3.16 Deck Type 1: Wood, Non -Insulated
Deck Description: Min. 19/32" plywood or wood plank
System Type E: Base sheet mechanically fastened to deck; underlayment adhered to base sheet
Base Sheet: One or more plies of Elastobase, Elastobase P or FBC HVHZ Approved ASTM D226, Type II felt with a
minimum 4-inch side lap and 6-inch end lap, mechanically fastened to deck.
Fastening: Simplex MAXX Cap Fastener (NOA 18-1227.05), 8-inch o.c. at the lap -edges and 8-inch o.c. in three (3)
equally spaced, staggered center rows.
Primer: PG300 or ASTM D41 primer applied to stress plates
Base Ply: (Optional) Polystick MTS Plus, self -adhering and back -nailed max. 12-inch o.c. using FBC HVHZ
Approved nails and tin caps (FBC HVHZ 1517.5)
Cap Ply: PolystickTU Max or Polystick TU Plus, self -adhering and back -nailed max. 12-Inch o.c. using FBC HVHZ
Approved nails and tin caps (FBC HVHZ 1517.5).
Surfacing: FBC HVHZ Approved adhesive -set tile roof system. Refer to Table SA for allowable tile adhesives and
Table 4 for tile stagging limitations.
6.3.17 Deck Type 3: Structural concrete, non -Insulated
Deck Description: Min. 2,500 psi structural concrete
System Type F: Underlayment adhered
Primer: ASTM D41
Underlayment: Elastoflex 56 G applied in hot asphalt or
Polyflex G torch -applied or
Polyflex SA P, self -adhering
Surfacing: FBC HVHZ Approved adhesive -set the roof system. Refer to Table 1A for allowable tile adhesives and
Table 4 for the stagging limitations.
6.3.18 1 Deck Type 3: Structural concrete, non -insulated
Deck Description: Min. 2,So0 psi structural concrete
System Type F: Underlayment adhered
Primer:
ASTM D41
Base Ply:
(Optional) Polystick NITS Plus, self -adhering
Cap Ply:
Polystick TU Max or Polystick TU Plus, self -adhering
Surfacing:
FBC HVHZ Approved adhesive -set the roof system. Refer to Table 1A for allowable tile adhesives and
Table 4 for tile stagging limitations.
7. BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction to properly evaluate the installation of this product.
Contact the named CIA entity for manufacturing facilities covered by F.A.C. Rule 61G20-3 OA requirements. Refer to Section 4
herein for products and production locations having met codified material standards.
QUALITY9.
UL LLC—QUA9625; (414) 248-6409; Karen.buchmann(alul.com
END OF EVALUATION REPORT -
NEMO ETC, U.C. Evaluation Report 3m-PLYG-20-FBCER.A
Ceniimte of Aothorootion#32455 7-' EDITION(2020) FBC HVHZ EVALUATION 115259-1132(HVHZI
Polyglass Roof Underlaymetds Revision 28: 12/21/2020
Page 11 of 11