HomeMy WebLinkAboutNOA (2)MIAM
in MUM-DADE COUNTY
PRODUCT CONTROL SECTION
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208
BOARD AND CODE ADNM41STRATION DIVISION Miami, Florida 33175-2474
T (786) 315-2590 F (786) 315-2599
NOTICE OF ACCEPTANCE OA) www.miamidade.ov/econor,ii
Owens Corning Roofing and Asphalt, LLC
One Owens Corning Parkway
Toledo, OH 43659
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami -Dade County RER - Product Control Section to be
used in Miami -Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control Section
(in Miami -Dade County) and/or the AHJ (in areas other than Miami -Dade County) reserve the right to have this
product or material tested for quality assurance purposes. If this product or material fails to perform in the accepted
manner, the manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or
suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance,
if it is determined by Miami -Dade County Product Control Section that this product or material fails to meet the
requirements of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Duration®, Duration® Premium, TruhefinitionO Duration®, and TruDefinition® Duration®
Designer Colors Collection
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA renews NOA No.12-0309.01 and consists of pages 1 through 6.
The submitted documentation was reviewed by Gaspar J Rodriguez.
�A- AOVEO
NOA No.: 16-0425.01
Expiration Date: 07/19/21
Approval Date: 07/21/16
Page 1 of 6
ROOFING ASSEMBLY APPROVAL
Category: Roofing
Sub -Category: Asphalt Shingles
Materials: Laminate
Deck Type: Wood
SCOPE
This approves a roofing system using Owens Corning Duration® and Duration® Premium asphalt shingles
manufactured by Owens Corning as described in Section 2 of his Notice of Acceptance.
PRODUCT DESCRIPTION
Product Dimensions Test Specifications Product Description
Duration®
13 '/4' x 39 3/s"
Manufacturing Locations #1, 2
Duration® Premium;
13 %4' x 39 3/8"
TruDefinition® Duration®;
TruDeflnition® Duration®
Designer Colors Collection
Manufacturing Location #1, 2, 3, 4
Duration®
13 %. " x 39 3/8"
Manufacturing Location #1, 2, 3
Duration® Premium;
13 '/4' x 39 3/8"
TruDeFnitiong Duration®;
TruDefinition® Duration®
Designer Colors Collection
Manufacturing Location #1, 2, 3, 4
MANUFACTURING LOCATION
1. Jacksonville, FL
2. Memphis, TN
3. Savannah, GA
4. Irving, TX
TAS 110 A heavy weight, fiberglass reinforced
four tab asphalt shingle with
continuous bead of sealant.
TAS 110 A heavy weight, fiberglass reinforced
four tab asphalt shingle with large nail
area with continuous bead of sealant.
TAS 110 A heavy weight, fiberglass reinforced
four tab asphalt shingle with dashed
bead of sealant.
TAS 110 A heavy weight, fiberglass reinforced
four tab asphalt shingle with dashed
bead of sealant.
NOA No.: 16-0425.01
Expiration Date: 07/19/21
Approval Date: 07/21/16
Page 2 of 6
EVIDENCE SUBMITTED
Test Agency
Test Identifier
Test Name/Report
Date
PRI Asphalt Technologies, Inc.
OCF-157-02-01
TAS 100
10/26/10
OCF-102-02-01
TAS 100
11/12/07
OCF-156-02-01
TAS 100
10/26/10
OCF-163-02-01
TAS 100
12/10/10
OCF-164-02-01
TAS 100
12/10/10
OCF-098-02-01
TAS 100
02/22/07
OCF-099-02-01
TAS 100
02/26/07
OCF-102-02-01
TAS 100
11/12/07
OCF-172-02-01
TAS 100
05/26/11
OCF-179-02-01
TAS 100
02/02/12
Underwriters Laboratories, Inc.
07CA39536
TAS 107
11/11/07
03NK04954
TAS 107
03/28/03
03NK04954
TAS 107
03/11/03
IONK13947
TAS 107
11/12/10
IICA15662
TAS 107
05/27/11
1INB21712
TAS 107
02/18/12
07CA02026
ASTM D 3462
01/26/07
12CA12180
ASTM D 3462
03/01/12
LIMITATIONS
I. Fire classification is not part of this acceptance; refer to a current Approved Roofing Materials Directory for
fire ratings of this product.
2. Shall not be installed on roof mean heights in excess of 33 ft.
3. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code
and Rule 61 G20-3 of the Florida Administrative Code.
INSTALLATION
1. Shingles shall be installed in compliance with Roofing Application Standard RAS 115.
2. Flashing shall be in accordance with Roofing Application Standard RAS 115
3. The manufacturer shall provide clearly written application instructions.
4. Exposure and course layout shall be in compliance with Detail'A', attached.
5. Nailing shall be in compliance with Detail B', attached.
LABELING
1. Shingles shall be labeled with the Miami -Dade Seal as seen below, or the wording "Miami -Dade County
Product Control Approved".
NOA No.: 16-0425.01
Expiration Date: 07/19/21
Approval Date: 07/21/16
Page 3 of 6
BUILDING PERMIT REQUIREMENTS
1. Application for building permit shall be accompanied by copies of the following:
1.1 This Notice of Acceptance.
1.2 Any other documents required by the Building Official or the applicable code in order to properly
evaluate the installation of this system.
DETAIL A
NOA No.: 16-0425.01
Expiration Date: 07/19/21
Approval Date: 07/21/16
Page 4 of 6
DETAIL B
DURATION & TRUDEFINITION® DURATION®
(SEALANT MAY BE CONTINUOUS OR DASHED. NOT SHOWN IN THE DETAIL DRAWINGS)
CL
APMMO b
NOA No.: 16-0425.01
Expiration Date: 07/19/21
Approval Date: 07/21/16
Page 5 of 6
a Nail patLorn
F-s.gLwm do 0 e1atos
ri
5 Sir E.Xpowr*
5 SIV' de expaukkm
rt
�wgne Caning
she
Suter toolecoir% arse wider
Arm do dh+ws &wel 0
5 Srr Expowr•
S str de exp+ si6o"
MAXMUM SLOPE 21:12
FaStening for Slopes Greater Than 21:12
Sureftl* fastoffing area 1M.
Halt,.?+Pjcal
12"
ZWE-1 • *arm 1 0 OW&A coec Ind
Path t" Spots, .dfAsphalt Rob ug Comsat
SLOPE GREATER THAN 21:12
END OF THIS ACCEPTANCE
i
0 ilR
NOA No.:16-0425.01
Expiration Date: 07/19/21
Approval Date: 07/21/16
Page 6 of 6