HomeMy WebLinkAboutProduct Evaluation ReportBUILDING DROPS
A Perfect Solution in Every Dropl
Certificate of Authorization: 29578
of
398 East Dania Beach Blvd.
Suite 338
Dania Beach, FL 33004
954.399.8478 PH
954.744.4738 FX
contact@buildingdrops.com
Silver Line Building Products Corp.
V1 Series / 70 Series Single -Hung Window (2127)
(Impact) (HVHZ)
for
Florida Product Approval
FL# FL14911
res , . Ci <,�r ! :: yMs
Current Florida Building Code
Method: 1— D (Engineering Evaluation)
Category: Windows
Sub — Category: Single Hung
Product: V1 Series / 70 Series Single Hung Window
(2127)
Material: PVC
Product Dimensions: See Installation Instructions, SWD050
Prepared for:
Salver line Building Products Corp.
One S1lverilne Dr.
North Brunswick, NJ 08902
````,%1111111111�''
% E 0
Prepared by:
E p0
Hermes F. Nore�®,,P.E.
_ N .7 7
Florida Professional Engineer # 73778
�'o S A OF•
Date:01/23/2018
i 0 �4
Contents:
Evaluation Report Pages 1-3
O IDP.'
''i FS
e'i� S
Digitally signed by Hermes F. Norero, P.E.
nomsml, �� E.
Reason: i am approving this document
Date: 2018.04.19 00:55:47-04'00'
Harme�s'fl
Florida Florida No. 73778
N
BUILDING DROPS
A Perfect Solution in Every Dropl
Certificate of Authorization: 29578
Manufacturer: Silver Line Building Products Corp.
Product Category: Windows
Product Sub -Category: Single Hung
Compliance Method: State Product Approval Method (1)(d)
Product Name: V1 Series / 70 Series Single Hung Window (2127)
FL#: FL14911
Date: 01/23/2018
Report No: 5486
Scope: This is a Product Evaluation Report issued by Hermes F. Norero, P.E. (FL # 73778) for Silver Line
Building Products Corp. based on Method 1d of the State of Florida Product Approval, Florida
Department of Business and Professional Regulation - Florida Building Commission.
Limits of Use:
Hermes F. Norero, P.E. does not have nor will acquire financial interest in the company
manufacturing or distributing the product or in any other entity involved in the approval process of
the product named herein.
This product has been evaluated for use in locations adhering to the Current Florida Building
Code.
See Installation Instructions SWD050, signed and sealed by Hermes F. Norero, P.E. (FL # 73778) for
specific use parameters.
1. This product has been evaluated and is in compliance with the Current Florida Building Code,
including the "High Velocity Hurricane Zone" (HVHZ).
2. Product anchors shall be as listed and spaced as shown on details. Anchor embedment into
substrate material shall be beyond wall dressing or stucco.
3. When used in areas requiring wind borne debris protection this product complies with
Chapter 16 of the Current Florida Building Code and does not require an impact resistant
covering.
4. Site conditions that deviate from the details of drawing SWD050 require further engineering
analysis by a licensed engineer or registered architect.
S. See Installation Instructions SWD050 for size and design pressure limitations.
Hermes F. Norero, P.E.
Florida No. 73778
Page 2 of 3
r
BUILDING DROPS FL#: FL14911
A Perfect Solution in Every Dropl Date: 01/23/2018
Certificate of Authorization: 29578
Report No: 5486
Quality Assurance: The manufacturer has demonstrated compliance of window products in Accordance
with the Current Florida Building Code and State Rules for manufacturing under a
quality assurance program audited by an approved quality assurance entity through
Window and Door Manufacturers Association (FBC Organization #: QUA2515).
Performance Standards: The product described herein has.been tested per:
Referenced Data:
Installation:
• TAS 201-94
• TAS 202-94
• TAS 203-94
• ASTM E330-02
• ASTM E1886-05
• ASTM E1996-06/09/12
t AAMA/WDMA/CSA 101/I.S.2/A440-08
1. Product Testing performed by National Certified Testing Laboratories, Inc.
(FBC Organization # TST1589)
Report: Dated:
NCTL 110-16327-1 08/13/2013
Signed and Sealed by: Harold E. Rupp, FL PE No 15935, Sealed Date 02/06/18
NCTL 110-16327-2 11/05/2013
NCTL110-16327-3 08/13/2013
2. Quality Assurance
Window and Door Manufacturers Association
(FBC Organization #: QUA2515)
3. Material Certification
Miami -Dade County Notice of Acceptance
Eastman Chemical Company (Previously Solutia)
Saflex (Vanceva Composites) PVB Interlayer
4. PVC profiles meet requirements of WDMA/HallMark WD-61 in accordance
with AAMA 303
Refer to Installation Instructions (SWD050) for anchor spacing and more details of the installation
requirements.
Design Pressure:
Refer to Installation Instructions (SWD050) for anchor spacing and more details of the installation
requirements.
Hermes F. Norero, P.E.
Florida No. 73778
Page 3 of 3