HomeMy WebLinkAboutAPPROVED FL8784.1 - Picture Windows 1CERTIFICATION NO: NI008088.01-R9
DATE: 06/03/2007
CERTIFICATION PROGRAM: Structural
COMPANY: WiWinTech
CODE: 583-1
REVISION DATE: 04/03/2019
To verify that the “Notice of Product Certification” is valid, please visit www.NAMICertification.com to assure that the
product is active and currently listed. This certification represents product conformity to the applicable specification and
that certification criteria has been satisfied. A NAMI approved certification label must be applied to the product to claim
certification status. Please review and advise NAMI if any corrections are required to this document.
COMPANY NAME AND ADDRESS PRODUCT DESCRIPTION
ViWinTech Windows and Doors Series “SL 3100 i PW 7872" Impact
2400 Irvin Cobb Drive Rated Vinyl Fixed Prime Window
Paducah, KY 42003-0588 Configuration: O
(Fin Mount)
Glazing: IG-3/16" Annealed Glass/Laminate-3/16"
Annealed Glass/0.090" DuPont Sentryglas®
Plus/3/16" Annealed Glass
Frame: W-1980mm(78") H-1830mm(72")
DLO: W-1835mm(72.25") H-1690mm(66.5")
SPECIFICATION PRODUCT RATING
AAMA/WDMA/CSA 101/I.S.2/A440-05
TAS 201/202/203-94
FW-R60 1980 x 1830 (78 x 72)
Design Pressure: +60/-60 psf
Large Missile Impact Rated
Product Tested By: National Certified Testing Laboratories, Inc.
Report No: NCTL-110-10728-27/110-10728-25
Expiration Date:May 31, 2023
Administrator’s Signature:
NATIONAL ACCREDITATION AND
MANAGEMENT INSTITUTE, INC.
4794 George Washington Memorial Highway
Hayes, VA 23072
Tel: (804) 684-5124
Fax: (804) 684-5122
NOTICE OF PRODUCT CERTIFICATION
CERTIFICATION NO: NI008088.02-R9
DATE: 06/03/2007
CERTIFICATION PROGRAM: Structural
COMPANY: WiWinTech
CODE: 583-1
REVISION DATE: 04/03/2019
To verify that the “Notice of Product Certification” is valid, please visit www.NAMICertification.com to assure that the
product is active and currently listed. This certification represents product conformity to the applicable specification and
that certification criteria has been satisfied. A NAMI approved certification label must be applied to the product to claim
certification status. Please review and advise NAMI if any corrections are required to this document.
COMPANY NAME AND ADDRESS PRODUCT DESCRIPTION
ViWinTech Windows and Doors Series “SL 3100 i PW 7872" Impact
2400 Irvin Cobb Drive Rated Vinyl Fixed Prime Window
Paducah, KY 42003-0588 Configuration: O
(Flush Mount)
Glazing: IG-3/16" Annealed Glass/Laminate-3/16"
Annealed Glass/0.090" DuPont Sentryglas® Plus/3/16"
Annealed Glass
Frame: W-1980mm(78") H-1830mm(72")
DLO: W-1835mm(72.25") H-1690mm(66.5")
SPECIFICATION PRODUCT RATING
AAMA/WDMA/CSA 101/I.S.2/A440-05
TAS 201/202/203-94
FW-R60 1980 x 1830 (78 x 72)
Design Pressure: +60/-60 psf
Large Missile Impact Rated
Product Tested By: National Certified Testing Laboratories, Inc.
Report No: NCTL-110-10728-27/110-10728-26
Expiration Date:May 31, 2023
Administrator’s Signature:
NATIONAL ACCREDITATION AND
MANAGEMENT INSTITUTE, INC.
4794 George Washington Memorial Highway
Hayes, VA 23072
Tel: (804) 684-5124
Fax: (804) 684-5122
NOTICE OF PRODUCT CERTIFICATION
L. Roberto Lomas P.E.
233 W. Main St
Danville, VA 24541
434-688-0609
rllomas@lrlomaspe.com
Manufacturer:ViWinTech Windows and Doors
2400 Irvin Cobb Dr.
Paducah, KY 42003-0588
Engineering Evaluation Report
Report No.: 511139-l E
Product Line: SL 3100 i PW 7872 Shoreline Picture Window 3100 (78x72) Impact HVHZ
Compliance:
The above mentioned product has been evaluated for compliance with the requirements of the Florida Department of
Business and Professional Regulation for Statewide Acceptance per Rule 61 G20-3.005 method 1 (a). The product listed
herein complies with requirements of the Florida Building Code.
Supporting Technical Documentation:
1. Approval document: drawing number 08-00204 Revision E, prepared, signed and sealed by L. Roberto Lomas
P.E.
2. Report No.: NCTL 110-10728-24, signed by Robert H. Zeiders, P.E.
National Certified Testing Laboratories, York, PA.
AAMA/WDMA/CSA 101/1.S.2/A440-05 (Flange installation)
Design pressure: +60.Opsf
Water penetration resistance 9.Opsf
3. Report No.: NCTL 110-10728-25, signed by Robert H. Zeiders, P.E.
National Certified Testing Laboratories, York, PA.
AAMA/WDMA/CSA 101/1.S.2/A440-05 (Fin installation)
Design pressure: +60.Opsf
Water penetration resistance 9.Opsf
4. Report No.: NCTL 110-10728-26, signed by Robert H. Zeiders, P.E.
National Certified Testing Laboratories, York, PA.
AAMA/WDMA/CSA 101/1.S.2/A440-05 (Flush installation)
Design pressure: +60.Opsf
Water penetration resistance 9.Opsf
5. Report No.: NCTL 110-10728-27, signed by Robert H. Zeiders, P.E.
National Certified Testing Laboratories, York, PA.
Flange, fin and flush installation
TAS 201-94 Large Missile Impact Test
TAS 202-94 Uniform Static Air Pressure, +60.Opsf design pressure, 9.Opsf water penetration.
TAS 203-94 Cyclic Pressure loading +60.Opsf design pressure
6. Anchor calculations, report number 511140-1, prepared, signed and sealed by L. Roberto Lomas P.E.
Limitations and Conditions of use:
• Maximum design pressure:+60.Opsf
• Maximum unit size:78" x 72"
• Units must be glazed per ASTM E1300-04, refer to approval document for glazing details.
• This product is rated to be used in the HVHZ.
• This product is impact resistant and does not require impact protection in wind borne debris regions.
• Frame material to be rigid PVC.
Installation:Units must be installed in accordance with manufacturer's installation
instructions and approval document, 08-00204, Revision E.
Certification of Independence:Please note that I don't have nor will acquire a
financial interest in any company manufacturing or distributing the product(s) for which
this report is being issued. Also, I don't have nor will acquire a financial interest in any
other entity involved in the approval process of the listed product(s).
1 of 1
4\31:141.:,1./4/4.
f<2<>GEN;..ld'1-e. s2 *" ,#1(100625 '· * 2
** S,ATE OF *.05<328' * :L OR \01: ..'dr.S..- G44-8/OAL E"///////111\\\\\\
Luis R. Lomas, P.E.
FL No.: 62514
10/29/2015