HomeMy WebLinkAboutProduct Approval; Single Hung WindowsFlorida Building Code Online
Page 1 of 3
BCIS Home ? Log In User Registration Hot Topics Submit Surcharge
Stats &Facts Publications Contact Us gip Varch
Product Approval
USER: Public User
wr -s
Product Approval Meru > Product or Aoalication Sear[h > Application list > Application Detail
REVIE®��yrry1 F on
i
FL #
FL14095-RII
CODE COMPLIANCE
Application Type
Code Version
Affirmation
2020
Y
����� COUNTY
ST.
Application. Status
Approved
`BOCC%! C� 14
Comments
Archived
Product Manufacturer JELD-WEN
Address/Phone/Email 3737 Lakeport Blvd
Klamath Falls, OR 97601
(800) 535-3936
fbcl@jeld-wen.com
Authorized Signature Rylee Sumner Fricks
fbcl@jeld-wen.com
Technical Representative JELD-WEN Corporate Customer Service
Address/Phone/Email 3737 Lakeport Blvd.
Klamath Falls, OR 97601
(800) 535-3936
customerserviceagents@jeld-wen.com
Quality Assurance Representative
Address/Phone/Email
Category Windows
Subcategory Single Hung
Compliance Method Certification Mark or Listing
Certification Agency National Accreditation & Management Institute
Validated By National Accreditation & Management Institute
Referenced Standard and Year (of Standard) Standard Year
TAS 201 1994
TAS 202 1994
TAS 203 1994
Equivalence of Product Standards
Certified By
I affirm that there are no changes in the new Florida Building
Code which affect my product(s) and my product(s) are in
compliance with the new Florida Building Code.
Documentation from approved Evaluation or Validation Entity 0 Yes w No O N/A
Product Approval Method
Method 1 Option A
https://www.floridabuilding. org/prlpr_app_dtl.aspx?param=wGEVXQwtDgtGLR%2byCB... 9/ 14/2021
Florida Building Code Online
Page 2 of 3
Date Submitted
Date Validated
Date Pending FBC Approval
Date Approved
Summary of Products
07/29/2020
07/29/2020
07/31/2020
FL #
Model, Number or Name
Description
14095.1
Premium Atlantic Vinyl
Single Hung (8100) 36" x 72" Insulated Glass (5/16 in PVB or
SGP Lam - 1/8 out Annealed )
Limits of Use
Certification Agency Certificate
Approved for use in HVHZ: Yes
FL14095 R11 C CAC NI011567.04-R3.pdf
Approved for use outside HVHZ: Yes
Quality Assurance Contract Expiration Date
Impact Resistant: Yes
04/30/2025
Design Pressure: +65/-70
Installation Instructions
Other: Laminated glazing interlayer material requirements
FL14095R11II FL14095 R5 II DP65-
meet the current edition of the FBC in accordance with Miami-
70 3602 Impact Installation Instructions.adf
Dade NOA for DuPont SentryGlas and DuPont PVB interlayers.
FL14095 Rll II NI011567.04-R3 Dwgs 07252017.odf
Verified By: Hermes Norero, PE 73778
White PVC exterior extrusion meet the current edition of the
FBC in accordance with Miami -Dade NOA for Quanex. IG back
Created by Independent Third Party: Yes
bedded with Dow 995. Safety glazing required to the exterior
Evaluation Reports
at heights above 30 feet.
FL14095 R11 AE PER3094.pdf
Created by Independent Third Party: Yes
14095.2
Premium Atlantic Vinyl
Single Hung (8100) 36" x 72" Insulated Glass (1/8 in - 1/8
out Annealed)
Limits of Use
Certification Agency Certificate
Approved for use in HVHZ: Yes
FL14095 R11. C CAC NI01.1567.08-R.l.pdf
Approved for use outside HVHZ: Yes
FL14095 R11 C CAC NI011567.09-R2.odf
Impact Resistant: No
Quality Assurance Contract Expiration Date
Design Pressure: +65/-70
04/30/2025
Other: White PVC exterior extrusion meet the current
Installation Instructions
edition of the FBC in accordance with Miami -Dade NOA for
FL14095 Rll II N1011567.09-R2 Dwgs 07252017.pdf
HL1 E:095.,_R11,,._II,__P1V..::%SH,._FC. 36x2,_S5,_201_/,-06, 26,;,pdf
Quanex. IG back bedded with Dow 995. Safety glazing
required to the exterior at heights above 30 feet.
Verified By: Hermes Norero, PE 73778
Created by Independent Third Party: Yes
Evaluation Reports
FL14095 R11 AE PER4869 SS 2017-06-26.odf
Created by Independent Third Party: Yes
14095.3
Premium Atlantic Vinyl
Single Hung (8100) 52 1/8" x 75" Insulated Glass (3/16 in -
3/16 out Annealed)
Limits of Use
Certification Agency Certificate
Approved for use in HVHZ: Yes
FL14095 Rli C. CAC NI011567.06-Rl.odf
Approved for use outside HVHZ: Yes
FL14095 Rii C CAC NI011567.07-R2.pdf
Impact Resistant: No
Quality Assurance Contract Expiration Date
Design Pressure: +65/-70
04/30/2025
Other: White PVC exterior extrusion meet the current
Installation Instructions
edition of the FBC in accordance with Miami -Dade NOA for
FL14095 R11 H NI011567.07-R2 Dwgs 07252017.odf
F17:09,__R],1__II._PAV..TSH FI3C 52x75 SS 201:7-06.2G,pcif
Quanex. IG back bedded with Dow 995. Windows with
insulated glass wider than 36" require setting blocks. Safety
Verified By: Hermes Norero, PE 73778
glazing required to the exterior at heights above 30 feet.
Created by Independent Third Party: Yes
Evaluation Reports
FLIA095 Ril_AE .PER4.8/0 55,_2017,-06-26,pdf
Created by Independent Third Party: Yes
14095.4 J 1 Premium Atlantic Vinyl
im' f Use
Approved for use in HVHZ: Yes
Approved for use outside HVHZ: Yes
Impact Resistant: Yes
Design Pressure: +50/-60
Other: Laminated glazing interlayer material requirements
meet the current edition of the FBC in accordance with Miami -
Dade NOA for DuPont SentryGlas and DuPont PVB interlayers.
White PVC exterior extrusion meet the current edition of the
FBC in accordance with Miami -Dade NOA for Quanex. IG back
bedded with Dow 995. Windows with insulated glass wider
than 36" require setting blocks. Safety glazing required to the
exterior at heights above 30 feet.
Single Hung (8100) 52 1/8" x 75" Insulated Glass (5/16 in
PVB or SGP Lam - 1/8 out Annealed)
Certification Agency Certificate
FL14095 R11 C CAC NI011567.02-112.odf
Quality Assurance Contract Expiration Date
04/30/2025
Installation Instructions
FL14095 Rll II FL1.4095 R5 lI DP50-
60 52125x75 Impact Installation Instructions.pdf
FL14095 R11 1I NI011567.02-R2 Dwos 07252017.odf
Verified By: Hermes Norero, PE 73778
Created by Independent Third Party: Yes
Evaluation Reports
FL14095 R11 AE PER3091.ndf
Created by Independent Third Party: Yes
14095.5 I Premium Atlantic Vinyl Single Hung (8100) 52 1/8" x 75" Insulated Glass (5/16 in
SGP Lam - 3/16 out Annealed)
Limits of Use Certification Agency Certificate
Approved for use in HVHZ: Yes FL14095 Rii C CAC NI011567.01-Rl.odf
Approved for use outside HVHZ: Yes EUA.,095_,_Ili_i..._C,,,_C8C„_Ni0115C _11I_pdf
Impact Resistant: Yes Quality Assurance Contract Expiration Date
https: //www.floridabuilding. org/pr/pr_app_dtl. aspx?param=wGEVXQ WtDgtGLR%2byCB ... 9/ 14/2021
Florida Building Code Online
Page 3 of 3
Design Pressure: +65/-75
Other: Laminated glazing interlayer material requirements .
meet the current edition of the FBC in accordance with Miami -
Dade NOA for DuPont SentryGlas and DuPont PVB interlayers.
White PVC exterior extrusion meet the current edition of the
FBC in accordance with Miami -Dade NOA for Quanex. IG back
bedded with Dow 995. Windows with insulated glass wider
than 36" require setting blocks. Safety glazing required to the
exterior at heights above 30 feet.
04/30/2025
Installation Instructions
FL14095 R11 11 FL14095 R5 11 DP65-
75 52.125x75 Impact installation Instructions,ndf
FL14095 R11 II NI011567.01-R1 Dwgs 07252017.pdf
Verified By: Hermes Norero, PE 73778
Created by Independent Third Party: Yes
Evaluation Reports
FL14095 R11 AE PER3095.odf
Created by Independent Third Party: Yes
Baci -
Contact Us :: 2601 Blair Stone Road, Tallahassee FL 32399 Phone: 850-487-1824
The State of Florida is an AA/EEO employer. Copyright 2007-2013 State of Florida.:: Privacy Statement :: Accessibility Statement :: Refund Statement
Under Florida law, email addresses are public records. If you do not want your e-mail address released in response to a public -records request, do not send electronic
mail to this entity. Instead, contact the office by phone or by traditional mail. If you have any questions, please contact 850.487.1395. *Pursuant to Section 455.275
(1), Florida Statutes, effective October 1, 2012, licensees licensed under Chapter 455, F.S. must provide the Department with an email address if they have one. The
emails provided may be used for official communication with the licensee. However email addresses are public record. If you do not wish to supply a personal address,
please provide the Department with an email address which can be made available to the public. To determine if you are a licensee under Chapter 455, F.S., please
click here .
Product Approval Accepts:
MW9MEIM
Credit•
Safe
.�Cltrit�rr�t>e'r�1.eN�,
https://www.floridabuilding. org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgtGLR%2byCB... 9/ 14/2021
I
NIDSPAN
A
157V 0.0.
W1L n=
NAL FlN
p�
LS
NAIL
co;M
�woom %Wffl Qu 1/E•
TYPICAL ELEVATION WITH FASTENER 5PACIN6
Installation Notes:
1. Seal flange/frame to substrate.
2. Use #10 PH or greater fastener though the nail fin with sufficient length to penetrate a minimum of 1
1/2" into the wood framing. For 2X wood frame substrate (min. S.G. = 0.42).
3. Host structure (wood buck, masonry, steel) to be designed and anchored to properly transfer all loads
to the structure. The host structure is the responsibility of the architect or engineer of record for the
project of installation.
Digitally signed by Hermes F. Norero, P.E.
Reason: I am approving this document
Date: 2014.09.1916:25:32-04'00'
This schedule addresses only the fasteners required to anchor the
I I I
window to achieve the rated design pressure up to the size limitations
�����
noted. It is not intended as a guide to the installation process and does
not address he sealing consideration that may arise in different wall
��� �� •.•''' •• •' • <
conditions. For the complete installation procedure, see the instructions
packaged with the window or go to
7
www.jeld-wen.com/resources/installation.
DISCLAIMER:
T T
••'•.
This drawing and its contents are confidential and are not to be
reproduced or copied in whole or in part or used or disclosed to others
.0 O
���pXN
except as authorized by JELD-WEN Inc.
age g°9e eea
11/2' MIN. EMBEDMENT
2
2X WOOD FRAME
i
DISTANCE
-1MIN.
7 FOR EDGE: 3/4'
1/4' MAX 3
J
SHIM SPACE
2mm
2mm
3mm
r4 3mm
GLASS
13it m
f
GLAZING DETAIL
1
FRAME SECTION (TYP)
1
VERTICAL SECTION
w11e —IWIu Fkdr&W dOpwy
1/4" MAX
SHIM SPACE 3
MIN. DISTANCE
FOR EDGE: 3/4'
2
2X WOOD FRAME
11/2' MIX EMBEDMENT
338
NAIL FIN INSTALLATION
JAMS SECTION (TYP)
HORIZONTAL SECTION
NOTE: Caulk between Nailing flange 6 Wood Openi,g.
PREMIUM ATLANTIC VINYL SH WINDOW
Max Frame I DP RATING IMPACT
52 1/8 x 75 1 +50/-60 1 YES
LARGE MISSILE IMPACT
General Notes:
1. The product shown herein is designed, tested and manufactured to comply with the wind load criteria
of the adopted International Building Code(IBC), the International Residential Code(IRC), the Florida
Building Code (FBC) including HVHZ and the industry requirement for the stated conditions.
2. All glazing shall conform to ASTM E1300.
3. At minimum, glazing is 3mm annealed -11mm airspace - 3mm annealed - 2mm PVB Intedayer by
DuPont - 3mm annealed.
4. Use structural or composite shims where required.
PROJECT ENGINEER: DATE:
-- 08/13/2014 JELDAWEN 3737 Lakeport Blvd
DRAWN BY: SCALE: Klamath Falls, OR. 97601
D. Vezo NTS Phone: (541) 882-3451
CHECKED BY:
J. Kantola
APPROVED BY: Premium Atlantic Vinyl Impact Single Hung Window
No. IREV: 00 ISHEET
1 OF3
14111O JAMS
5X YA% -----
FROY
COR =
lox
YAtTI=
Jlmll
AYD
MAIL
r
eoRlFs:s Pcomma
�W= W WIDIN (52 IN I %)_
I
TYPICAL ELEVATION WITH FASTENER SPACING
Installation Notes:
1. Seal flange/frame to substrate.
2. Use 3/16" ITW Tapcon or equivalent fasteners through frame with sufficient length to penetrate a
minimum of 1 1/4" into concrete or masonry at each location with a 21/2" min from edge distance. For
concrete (min. fc = 3000psi) or masonry substrate (CMU shall adhere to ASTM C90).
3. Host structure (wood buck, masonry, steel) to be designed and anchored to properly transfer all loads
to the structure. The host structure is the responsibility of the architect or engineer of record for the
project of installation.
This schedule addresses only the fasteners required to anchor the
window to achieve the rated design pressure up to the size limitations
noted. It is not intended as a guide to the installation process and does
not address he sealing consideration that may arise in different wall
conditions. For the complete installation procedure, see the instructions
.;
packaged with the window or go to
www.jeld-wen.com/resourcesfinstallaton.
DISCLAIMER:
This drawing and its contents are confidential and are not to be
reproduced or copied in whole or in part or used or disclosed to others
except as authorized by JELD-WEN Inc.
BOB a(
44%%J%J1IC'RI,,
MIN. DISTANCE
FOR EDGE: 21/2•
FMASONRY
e oaI
z
e
3
1 w• Mat
EMBEDMENT
1/4° MAX
SHIM SPACE
2mm
xmm
3mm 3mm
alb
GLAZING DETAIL
FRAME SECTION (TYP)
VERTICAL SECTION
wrE: mn � wiu. w.w a "c.e a,.aq
vA• MAX
SHIM SPACE
a
d • ,® .. 1 vA• Mat
EMBEDMENT
q •.
2 MASONRY
BLOCK
MIN. DISTANCE
FOR EDGE: 21/2•
MASONRY INSTALLATION
i
11/4• MIN.
EMBEDMENT
1/4• MAX
Q 3 SHIM SPACE
MIN. DISTANCE . 0 a
FOR EDGE: 21/2° d Q
V
a•
. •v • 1v
MASONRY
BLOCK
JAMB SECTION (TYP)
HORIZONTAL SECTION
I
PREMIUM ATLANTIC VINYL SH WINDOW
Max Frame I DP RATING IMPACT
52 1/8 x 75 1 +50/-60 1 YES
LARGE MISSILE IMPACT
General Notes:
1. The product shown herein is designed, tested and manufactured to comply with the wind load criteria
of the adopted International Building Code(IBC), the International Residential Code(IRC), the Florida
Building Code (FBC) including HVHZ and the industry requirement for the stated conditions.
2. All glazing shall conform to ASTM E1300.
3. At minimum, glazing is 3mm annealed -11 mm airspace - 3mm annealed - 2mm PVB Interlayer by
DuPont - 3mm annealed.
4. Use structural or composite shims where required.
7j
PRWECTENGINEER:
DRAWN BY:
D. Vezo
fo..
J Kantola
APPROVED BY:
``
410FF�1li),
PLJT�PVO�/
L9
PEAd6h .%%Ate 938
IDENTIFIER No.
--
DATE: 3737 Lakeport Blvd
08/13/2014 JELDNENKlamathSCALE: Falls, OR. 97601
NTS Phone: (541) 882-3451
TITLE:
Premium Atlantic Vinyl Impact Single Hung Window
DWG. No.: I REV. 00 I SHEET
20F3
THOU Jim FROM
CORl1ER5 j
Afv
leA• HRU
Aux. t►Qu
J"
ie
S
CORNM
LWn11EB
j�WINWW WM (R 1/a• W7L)---�
TYPICAL ELEVATION WITH FASTENER SPACING
Installation Notes:
1. Seal flangetframe to substrate.
2. For anchoring into metal framing use #8 TEK Self Tapping screws with sufficient length to achieve a
minimum embedment of three threads past the frame thickness. Steel substrate min.18ga., fy = 33 ksi.
3. Host structure (wood buck, masonry, steel) to be designed and anchored to properly transfer all loads
to the structure. The host structure is the responsibility of the architect or engineer of record for the
project of installation.
This schedule addresses only the fasteners required to anchor the
window to achieve the rated design pressure up to the size limitations
noted. It is not intended as a guide to the installation process and does
not address he sealing consideration that may arise in different wall
Q` .•'``�• "
conditions. For the complete installation procedure, see the instructions
packaged with the window or go to
7
www.jeld-wen.com/resourcesAnstallation.
DISCLAIMER:
:• T T
This drawing and its contents are confidential and are not to be
'•.• Cp OQ'.�
�I'le�
reproduced or copied in whole or in part or used or disclosed to others
except as authorized by JELD-WEN Inc.
p x b
sea
MIN. DISTANCE
FOR ED6E:1/2°
Mia embedment
of three threads
past frame
FRAME SECTION (TYP)
VERTICAL SECTION
NOTE. CWRbels Nam Fav a Woos opuse
Min. embedment
of three threads
post frame
MIN. DISTANCE
FOR EDGE:1/2"
STEEL INSTALLATION
18 gauge min
Steel Stud
1/4" MAX
SHIM SPACE
MIN. DISTANCE 2
FOR EDGE: 1/2"
Min. embedment
of three threads 3
past frame
1
JAMB SECTION (TYP)
HORIZONTAL SECTION
PREMIUM ATLANTIC VINYL SH WINDOW
Max Frame I DP RATING IMPACT
52 1/8 x 75 1 +50/-60 1 YES
LARGE MISSILE IMPACT
General Notes:
1. The product shown herein is designed, tested and manufactured to comply with the wind load criteria
of the adopted International Building Code(IBC),, the International Residential Code(IRC), the Florida
Building Code (FBC) including HVHZ and the industry requirement for the stated conditions.
2. All glazing shall conform to ASTM E1300.
3. At minimum, glazing is 3mm annealed -11 mm airspace - 3mm annealed - 2mm PVB Interlayer by
DuPont - 3mm annealed.
4. Use structural or composite shims where required.
PROJECT ENGINEER:
j
DRAWN BY:
D. Vezo
.y,
CHECKED BY:
)C _
]. Kantola
X
APPROVED BY:
�` P�Tbpbm��i9
Ito SSa IDENTIFIER No.
NCTL210-3874-
3737
keport Blvd
i/2014 1 JEL
��N Klamath Falls,(5OR. 97601
) 82-3451
NTS
Premium Atlantic Vinyl Impact Single Hung Window
AND LOCATION: I CAD DWG. No.: I REV. 001
SHEET 3 OF 3
ntom
CORIERS
1B3' O.C.
YA
�
J B
p�
C
MAX
FROM
i10co
mm
�--ram WOM (521/r MAXI
TYPICAL ELEVATION WITH FASTENER SPACING
Installation Notes:
1. Seal flange/frame to substrate.
2. Use #10 PH or greater fastener though the jamb with sufficient length to penetrate a minimum of 1 1 /2"
into the wood framing. For 2X wood frame substrate (min. S.G. = 0.42).
3. Host structure (woad buck, masonry, steel) to be designed and anchored to properly transfer all loads
to the structure. The host structure is the responsibility of the architect or engineer of record for the
project of installation. Addendum to NAMI
Certification No: NIO11567.02-R2
Reviewed By:
This schedule addresses only the fasteners required to anchor the Date Reviewed: 07/25/2017
window to achieve the rated design pressure up to the size limitations
noted. It is not intended as a guide to the installation process and does
not address he sealing consideration that may arise in different wall
conditions. For the complete installation procedure, see the instructions
packaged with the window or go to
www.jeld-wen.com/resourcesfiinstallaton.
DISCLAIMER:
This drawing and its contents are confidential and are not to be
reproduced or copied in whole or in part or used or disclosed to others
except as authorized by JELD-WEN Inc.
MIN. DISTANCE
FOR EDGE: 3/4" 3
11/2' MIN.
EMBEDMENT
MAX
SK
SHIM SPACE
2mm
2mm
3mm 3mm
GLASS BITE
13. mm
r
GLAZING DETAIL
FRAME SECTION (TYP)
VERTICAL SECTION
NOTS( kE"Aroi Wv ,Fkm &Wood Op.&4
v4" MAX
SHIM SPACE
3
11/2" MIN.
EMBEDMENT
MIN.DISTANCE
FOR EDGE: 3/4'
THROUGH FRAME
INSTALLATION
11/2" MIN.
EMBEDMENT
1/4" MAX
SHIM SPACE
3
MIN. DISTANCE
FOR EDGE: 3/4"
,Z
1
JAMB SECTION (TYP)
HORIZONTAL SECTION
PREMIUM ATLANTIC VINYL SH WINDOW
Max Frame I DP RATINGI IMPACT
52 1/8 x 75 +50/-60 YES
LARGE MISSILE IMPACT
General Notes:
1. The product shown herein is designed, tested and manufactured to comply with the wind load criteria
of the adopted International Building Code(IBC), the International Residential Code(IRC), the Florida
Building Code (FBC) including HVHZ and the industry requirement for the stated conditions.
2. All glazing shall conform to ASTM E1300.
3. At minimum, glazing is 3mm annealed -11mm airspace - 3mm annealed - 2mm PVB Intedayer by
DuPont - 3mm annealed.
4. Use structural or composite shims where required.
PROJECT ENGINEER: DATE: 08/13]3] Lakeport Blvd
3/2014
DRAWN BY: SCALE: Klamath Falls, OR. 97601
D. Vezo NTS Phone: (800) 535-3936
CHKKED BY:
J. Kantola
APPROVED BY: Premium Atlantic Vinyl Impact Single Hung Window
N IDENTIFIER TL2IO-38%4-J! FBC�E AND LOCATION: I CAD DWG. No.: I REV. oo I SHEET
1OF1