HomeMy WebLinkAboutFL17499_R8_AE_513321B-3 L. Roberto Lomas P.E. Engineering Evaluation Report
1432 Woodford Rd.
Lewisville,NC 27023 Report NO.: 513321 B
434-688-0609
rllomas@lrlomaspe.com
Manufacturer: MI Windows & Doors
650 West Market Street
Gratz, PA, 17030
Product Line: Series 185 Aluminum Single Hung Window 36"x 84"—Impact
Compliance:
The above mentioned product has been evaluated for compliance with the requirements of the Florida Department of
Business and Professional Regulation for Statewide Acceptance per Rule 61 G20-3.005 method 1(a). The product listed
herein complies with requirements of the Florida Building Code.
Supporting Technical Documentation:
1. Approval document: drawing number 08-02545 revision B, prepared, signed and sealed by Luis Roberto Lomas P.E.
2. Test report No.: E1729.01-109-47 signed and sealed by Michel D. Stremmel P.E.
Architectural Testing Inc.,York, PA
AAMA/WDMA/CSA 101/I.S.2/A440-08
Design pressure: ±60.15psf
Water penetration resistance 9.19psf
3. Test report No.: E1729.02-109-47 signed and sealed by Michel D. Stremmel P.E.
Architectural Testing Inc., York, PA
ASTM E1886-05 and ASTM E1996-12
ASTM E1886/E1996 Large Missile Impact, Level D,Wind Zone 3
ASTM E1886/E1996 Cyclic Load Test, ±55.Opsf design pressure
4. Anchor calculations, report number 513321-1, prepared, signed and sealed by Luis Roberto Lomas P.E.
Limitations and Conditions of use:
• Maximum design pressure: ±55.Opsf
• Maximum unit size: 36"X 84"
• Units must be glazed per ASTM El300-04/09, according with glazing details in approval drawing.
• This product is not rated to be used in the HVHZ.
• This product is impact resistant and does not require impact protection in wind borne debris regions.
• Frame material to be Aluminum 6063-T5.
Installation:
Units must be installed in accordance with manufacturer's installation instructions and approval document, 08-02545
revision B.
Certification of Independence:
Please note that I don't have nor will acquire a financial interest in any company manufacturing or distributing the
product(s)for which this report is being issued.Also, I don't have nor will acquire a financial interest in any other entity
involved in the approval process of the listed product(s).
fC
S�lv•• �ENs '9�,%��
ATE OF • �;
O 4. T
:c�0 RtOP• �•���•
s�ONAI E�G���
tl1111 t
1 of 1 Luis R. Lomas, P.E.
FL No.: 62514
10/02/2017