HomeMy WebLinkAboutBlower Door Testt1ll.Ol%l ix fI I»nlmlT T"LETiN3U
Envelope Leakage Test Report (Blower Door Test)
Residential Prescriptive, Performance or ERI Method Compliance
2017 Florida Building Code, Energy Conservation, 6th Edition
Jurisdiction:
Permit #: j
Job Information
Builder: K Hovnanian Community: Lot:
Address: I Unit:
*A4,
City: ,� State: FL Zip:
House S.F.
Avg. Ceiling Height. i t
Total Volume:
?' /
Air Leaks a Test Results Possing results must meet either the Performance, Prescriptive, or ERR Method
OPRESCRIPTIVE AMETHOD The building or dwelling unit shall be tested and verified as having an air leakage rate or not exceeding 7 air
change per hour at a pressure of 0.2�inch w.g, (50 pascals) in climate zones 1 and 2.
PERFORMANCE OR ERI METHOD - The building or dwelling unit shall be tested and verified as having an air leakage rate of not
exceeding the selected ACH(50) value, as shown on FORM R405-2017 (Performance) or R405-2017 (ERI), section labeled as infiltration, sub
section ACH.
ACH(50) specified on Form R405-2017WEnerrgy Calc (Performance) or R406-2017 (ERI);
Pressure & Flow Data (For Single Point)
Test #
House Pressure: Pascals
Flow: CFM (50)
Ring Used
'�7
ACH50 = CFM (50 60 / House Volume = � � L Method for calculating building volume:
O Retrieved from architectural plans
PASS ❑ FAIL
Code Software calculated
When ACH(50) is less than 3, Mechanical Ventilation installation must
Field measured and calculated
be verified by building department.
Testing, Testing shall be conducted in accordance with ANSI/RESNET/ICC 380 and reported at a pressure or 0,2 inch w.g. (50 pascals). Testing shall be
conducted by either individual as defined in Section 553.993(5) or (7), Florida Statues, or individuals licensed as set forth in Section 489,105(3)(f), (g), or (i) or
an approved third party. A written report of the results of the test shall be signed by the party conducting the test and provided to the code official, Testing
shall be performed at any time after creation of all penetrations of the building thermal envelope.
Testing Company
Company Name: RunBrook, LLC Phone: 561-510-5715
I hereby verify that the above Air Leaka resul -are in accordance with the 2017 61h Edition Florida Building Code
Energy Conservation requiremen a rdin o he compliance method selected above.
Signature of Tester: Date of Test: l
Printed Name of Tester. Fr < Costagliola
License/Certification #: 3243649 Issuing Authority: RESNET
n
C�REmEN F��.JIL:I"`al�1� ��JE� � TIr�"Clls�
Duct Leakage Test Report
Residential Prescriptive, Performance or ERI Method Compliance
201 / Florlda Building Code, Energy Conservation, 6L Edition
System 1
cfm25
System 2
cfm25
System 3
cfm25
Sum of any
additional systems
cfm25
Total of all
systems
cfm25
Prescriptive Method cfm25 (total)
To qualify as "substantially leak free" Qn must be less than or equal to
0,04 if air handler unit is installed, if air handler unit is not installed,
Qn Total must be less than or equal to 0,03. This testing method
meets the requirements in accordance with Section R403.3.3.
0 performance ! ERI Method cfm25 (Out or Total)
To qualify using this method, Qn must not be greater than the
proposed duct leakage Qn specified on Farm R405-2017 or R406-2017.
= o
�tin
Total of all Tota Conditioned Leakage Ypc'selected on Form Qn specified on Form 17405-014
systems uare Footage R405-2017 (Energy Calc) or R406-2017 (Energy Calc) or 406-2017
ASS FAIL
Duct tightness shall be verified by testing in accordance with ANSI/RESNET/ICC380 by either individuals as defined in Section
553,993(5) or (7), Florida Statutes, or individuals licensed as set forth in Section 489.105(3)(f), (g) or (1), Florida Statutes.
Testing Company
Company Company Name: RunBrook, LLC Phone: 561-510-5715
I hereby verify that the above duct leakage testing r is are in accordance with the 2017 6th Edition Florida Building Code Energy
Conservation requirements according to the com i ce method selected above.
Signature of Tester: Date of Test: Loll
Printed Name of Tester:
Frank Costagliola