HomeMy WebLinkAboutSPECIFICATIONSSPECIFICATIONS
Input Power:
Model 75096-When converted to 110V in the field: 110-220 VAC, 2.0 Amp Maximum,
with standard 115 VAC plug
Model 75096.......................................................: 220-240 VAC, 1.0 Amp Maximum
Chlorine Output:
Pool Pilot' Type
Water Chemistry
Max Ibs/day
Max kg/day
PPC1
Standard Pool Salt
0.80
0.36
Flow Requirements for 75097 & 75097M Inline Cell Assy:
Minimum Flow Rate.........: 20-gallons per minute (gpm) (76 liters/minute (L/m))
Maximum Flow Rate........: 100-gallons per minute (gpm) (379 liters/minute (Urn))
Maximum Op. Pressure....: 85-psi
Agency Approvals:
Tested to conform to the following specifications:
UL1081......................: Standard for Safety for Swimming Pool Pumps, Filters, and
Chlorinators
CAN/CSA-E60335-1 .... : Safety of Household and Similar Electrical Appliances
How Your Chlorine Generator Works
The system requires a low concentration of dissolved salt (sodium chloride) in the water. The salt concentration
level is normally maintained below the taste threshold. The Eco Nano automatically converts the salt into
chlorine, which your pool/spa requires to remain sanitized and algae free. The chlorine reverts back to salt after
treating the water. Since the salt is constantly recycled, there is minimal loss during a swimming season.
However, salt can be lost due to filter backwashing, rain water overflow, leaks, or bather splashing/carry out...
but not through evaporation.
The Eco Nano is designed to handle the purification needs of residential
swimming pools and spas. The amount of chlorine required for proper • •
sanitization will vary based on the pool size and various factors such as
water temperature, bather load, exposure to direct sunlight, and special water
features.
The water circulation pump must be operating for your Eco Nano
to produce chlorine, so run time is one of several key components
to maintaining the proper sanitizer levels.
Most installations require a minimum of eight (8) hours -per -day pump run
time to properly filter and sanitize the water.
3
SPECIFICATIONS
What's Included:
Both an Inline Cell Assembly and an Eco Nano control unit are required for complete installation.
Oxel pllet'
83�111N6
Control
Unit
Inline Cell Assembly
75097 or 75097M
Eco Nano Control Unit (75096 ):
Before attempting the installation, verify the following items have been included with the
Control Unit:
Eco Nano Controller 220V
DESCRIPTION
nQUANTITY
1
5 Foot AC Power Lead
1
PlasticAnchors
4
Mounting Screws
Inline Cell Assembly (75097 & 75097M):
The inline cell assembly is connected into the plumbing after all other equipment. Water from
the poollspa is moved though the inline cell assembly by the circulation pump.
Before attempting the installation, verify the following items have been included with the inline cell
assembly:
Included w/Inline Cell Assembly
QUANTITY DESCRIPTION
1
Flow SwitctVCord
1
Cell Cord
1
Cell Cord Cap
2
312-D - Union Half
2
312-G — Union Half -Flex
Inline Cell Assembly Replacement Parts
QUANTITY
DESCRIPTION
PPC1 Pool Pilot" Cell
1
1
APK0019 Inline Flow Switch
1
APK0040 Plumbing Pkg for Inline Cell
1
952 Cell Cord
1
STKO048 Cracked Union Nut Service Kit
2
19059 Metric Adapters (75097M)
0