HomeMy WebLinkAboutASME TANK SPECSQuality Steel Corporation AG/UG Propane Tanks
i
AooQnvinnATI AanvFrrRni Irvin/i iNni=r,Rnl iNn*(A(-,/I Irl vFSSFI nwNSIONS AND SPECIFICATIONS
WATER
CAPACITY
DIAMETER
(OD)
HEAD
TYPE
OVERALL
LENGTH
OVERALL
HEIGHT
LEG*
WIDTH
LEG4*
SPACING
WEIGHT
(lbs.)
**QUANTITY
FULLLOAD
PER5TACK
*120 wg.
24"
Ellip.
5'-8"
3'
1'-1 1/2"
2'-101/2"
or 3.11 11
260
109 196
16 1 12
*250 wg.
30"
Hemi.
7'-10"
3'-8"
1'-5"
4'-11"
480
54
9
*320 wg.
30"
Hemi.
91-7"
3`-8"
1`-5"
5'
620
45
9
500 wg.
37 1/2"
Ke.rni.
10,
4`-2"
1'-8"
5'
950
37 30'
8 1 6
1000 wg.
41"
Hemi.
16'
4'-5"
1'-8"
10'-1"
1,800
17 15
6 1 5
1450 wg.
46 1/2"
Ellip.
17174"
4'-11"
1'-911
11'-7"
2,650
12
4
1990 wg.
46 1/2"
Ellip.
23'-11"
4'-11"
1'-9"
16,
3,520
8
4
Dimensions and specifications shown are approximate. Individual vessels may vary.
Leg spacing +/- 2". Leg widths and spacing may vary based on mfg. location. Check with your salesperson for details. 120, 250, 320 wg. standard tanks
no holes in legs (one center hole on request). 500 and 1000 wg. standard tanks - 2 holes 16" on center. 1450 wg. and up as shown above.
Full load and stack quantities vary by shipping location. Check with your salesperson for details.
General- Specifications
- Conforms to the latest edition of ASME Rules for Construction of Pressure Vessels, Section VIII, Division 1
Complies with NFPA S8.
- Rated at 250 psig from -20' F to 125' F. All vessels registered with National Board.
-Two service. options available:
Option 1: Ready -to -bury underground option, coated with either powder coated phenolic epoxy finish
or liquid applied epoxy primer coat followed by urethane top coat, supplied with composite
AG/UG dome.
Option 2:'Aboveground option, coated with either powder coated TGIC polyester finish or liquid
applied epoxy primer coat followed by urethane topcoat, supplied with steel AG/UG dome.
- All vessels are shipped vacuum pre -purged to enable simplified first fill of the vessel.
Updated June 30, 2015