HomeMy WebLinkAboutPolyglas - PSLFlorida Building Code Online
Business Professional • i
gulation
ek ;
SCIS Home 1�g In I User Re istration ' N 9 I of Topics i Submit Surcharge Stats 9 Facts Publications !, Conta t Us BCIS Site Map j L r,ks , Search
bProduct
4411f�
Approval
a)r
USER: Public Use -
Product App.avy_,,, 1 1" '1 > Product or F�plicati�n Search > Ilcation , >
8p_p�� Application Detail
FL #
-• ". .-
FL5259-R33
Application Type
Revisior.
Code Version
2020
Application Status
Approved
Comments
Archived
P-oduct Manufacturer
POLYGLASS USA
Address/?hone/Email
1111 W. Newport Center Drive
Deerfield Beach, FL 33442
(954) 233-1330 Ext 242
malpert@polyglass.com
Authorized Signature
Maury Alpert
malpert@polyglass. com
Technical Representative
TECH .REP
Address/Phone/Email
1111 West Newport Center Drive
Deerfield Beach, FL 33442
(866)802-8017
L�spolyglasstechnical @polyglass,com
Quality Assurance Representative
QA REP
Address/Phone/Email
1111 West Newport Center Drive
Deerfield Beach, FL 33442
(888) 410-1375
::spolyglasstechnical@polyglass.com
Category
Roofing
Subcategory
Underlayments
Compliance Method
Evaluation Report from a Florida Registered Architect or a Licensed Florida
Professional Engineer
Evaluation Report - Hardcopy Received
Florida Engineer or Architect Name who developed the Robert Nieminen
Evaluation Report
Florida License PE-59166
Quality Assurance Entity UL LL C
Quality Assurance Contract Expiration Date 12/23/2023
Validated By John W. Knezevich, PE
Validation Checklist - Hardcopy Received
Certificate of Independence FL5259 R33 COI 2021 07 COI NIEhtI�N %qf
Referenced Standard and Year (of Standard) Standard
Year
ASTM D1970 2015
ASTM D226 2009
ASTM D4798 2011
ASTM D6163 2015
ASTM D6164 2011
ASTM D6222 2011
ASTM D6509 20i5
https:liftoridabuilding.org/prlpr_app_dti.aspx?param=wGEVXQwtDcvbSgAaZp3Crk2vS%2feg01ipIoQ53LIfLDSdir7nKfKN%2bQ%3d%3d 1/2
10/25/21, 2:33 PM
Equivalence of Product Standards
Certified By
Sections from the Code
Product Approval Method
Date Submitted
Date Validated
Date Pending FBC Approval
Date Approved
Date Revised
Summary of Products
Florida Building Code Online
FM 4474
FRSA/TRI, Sixth Edition.
TAS 103
UL 1897
Method 1 Option D
04/07/2021
04/12/2021
04/14/2021
06/08/2021
10/15/2021
2011
2018
2020
2015
FL # i Model, Number or Name
Description
5259.1 Polyglass Roof Underlayments
i ;(HVHZ)
Polyglass roof underlayments for use in FBC HVHZ jurisdictions.
Limits of use
Approved for use in HVHZ: Yes
Approved for use outside HVHZ: No
Impact Resistant: N/A
Design Pressure: N/A
Other: Refer to ER Section 5 for Limits of Use.
Installation Instructions
FL5259 R33 II 2021 04 07 FINAL ER PLYG UNDERLAYM=NTS FL5259
133 (HVHZ).p f
Verified By: Robe t Memi.ner. PE-59166
Created by Independent Third Party: Yes
Evaluation Reports
FL5259 R33 AE 2021 04 07 FINAL ER PLYG UNDERLAYMENTS F-5259-
R33 (HVH _pdf
Created by Independent Third Party: Yes
5259,2
Polyglass Roof Underlayments
(ron-HVHZ)
Polyglass roof underlayments, for use in FBC non-HVHZ jurisdictions.
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +N/A/-622.5
Other: 1.) The design pressure in this application
relates to one particular underlayment system for
use in the roof systems. Refer to ER Section 5.8.3
for other systems and associated maximum design
pressures. 2.) Refer to ER Section 5 for other limits
of ::se.
Installation Instructions
FL5259 R33 II 202! 04 07 FINAL ER PLYG UNDERLAYMENTS FL5259
R33 (NON-HVHZ;pddf
Verified By: Robert Nieminen PE-59166
Created by independent Third Party: Yes
Evaluation Reports
FL5259 R33 AE 2021 04 07 FINAL ER PLYG UNDERI AYMENTS P 5259-
R33 (NON-HVHZI,pdf
Created by Independent Third Party: Yes
Zack tvext
Contact Us :: Z621 $lair stone Road, Tallahassee FL 32399 Phone: 850-487-1824
The State of Florida Is an AA/EEO employer. 99J2yri9ht 2007.2013 State of Florida :; Privacy Statement :: ACCGsIbiIILV $$ atcment :: Refund statement
Under Florida law, emai! addresses are public records. If you do not want your e-mail address releasee in response to a public -records request, do not send electronic
mail to this entity. ir•read, contact the office by phone or by traditional mail. I` you have any questions, please contact 850.487.1395. 'Pursuant to Section 455,275(1),
Florida statutes, en ive October 1, 2012, licensees licensed under Chapter 4S5, ES, must provide the Department with an email address If they have one. The emaHs
pro,ded may be used for official communication with the licensee. However email addresses are public record. If you do not wish to supply a personat address, please
Provide the Department with an email address which can be made available to the public. 7b determine if you are a iicensee untler Chapter 455, Rs., please click here .
Product Approval Accepts:
x ®L=1
Credit Card
Safe
https:/ifloridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQMDgvbSgAaZp3Crk2vS%2fegOliploQ53LIfLDSdir7nKfKN%2bQ%3d%3d 2/2
TRINITY ERD
EVALUATION REPORT
Polyglass USA, Inc.
150 Lyon Drive
Fernley, NV 98408
EXTERIOR RESEARCH & DESIGN, LLC.
Certificate of Authorization #9503
353 CHRISTIAN STREET, UNIT #13
OXFORD, CT 06478
PHONE: (203) 262-9245
FAX: (203) 262-9243
Evaluation Report P12060.02.09-115
FL5259-R10
Date of Issuance: 02/24/2009
Revision 5: 06/25/2010
SCOPE:
This Evaluation Report is issued under Rule 9B-72 and the applicable rules and regulations
governing the use of construction materials in the State of Florida. The documentation submitted
has been reviewed by Robert Nieminen, P.E. for use of the product under the Florida Building Code
and Florida Building Code, Residential Volume. The products described herein have been designed
to comply with the 2007 Florida Building Code sections noted herein.
DESCRIPTION: Polyglass Roof Underlayments
LABELING: Each unit shall bear labeling in accordance with the requirements the Accredited Quality
Assurance Agency noted herein.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s)
changes, the referenced Quality Assurance documentation changes, or provisions of the Code that
relate to the product change. Acceptance of this Evaluation Report by the named client constitutes
agreement to notify Robert Nieminen, P.E. if the product changes or the referenced Quality
Assurance documentation changes. TrinityJERD requires a complete review of this Evaluation
Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded by the words "Trinity IERD Evaluated" may
be displayed in advertising literature. If any portion of the Evaluation Report is displayed, then it
shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by
the manufacturer or its distributors and shall be available for inspection at the job site at the
request of the Building Official.
This Evaluation Report consists of pages 1 through 9.
Prepared by:
Robert J.M. Nieminen, P.E.
Florida Registration No. 59166, Florida DCA ANE1983
The facsimile seal appearing was authorized
E DF =
by Robert Nieminen, P.E. on 06/25/2010
This does not serve as an electronically signed
document. Signed, sealed hardco ies have been
transmitted to the Product Approval Administrator and
to the named client
CERTIFICATION OF INDEPENDENCE:
1. TrinityJERD does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or
distributing products it evaluates.
2. TrinitylERD is not owned, operated or controlled by any company manufacturing or distributing products it evaluates.
3. Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any company manufacturing or distributing products for which
the evaluation reports are being issued.
4. Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
product.
TRINITY ERD
ROOFING COMPONENT EVALUATION:
1. SCOPE:
Product Category: Roofing
Sub -Category: Underlayment
Compliance Statement: Roof Underlayments, as produced by Polyglass USA, Inc., have
demonstrated compliance with the following sections of the Florida Building Code (non-HVHZ) through
testing in accordance with the following Standards. Compliance is subject to the Installation
Requirements and Limitations / Conditions of Use set forth herein.
2. STANDARDS:
Section
Property
Standard
Year
1507.2.4, 1507.2.9.2, 1507.3.3,
1507.5.3, 1507.6.3
Physical Properties
ASTM D1970
2001
1507.2.3, 1507.3.3, 1507.5.3,
1507.7.3, 1507.8.3, 1507.9.3,
1507.9.4
Physical Properties
ASTM D226
1997
1507.11.2
Physical Properties
ASTM D6164
2000
1507.11.2
Physical Properties
ASTM D6222
2002
1504.6
Accelerated Aging
ASTM G154
2000
1504.6
Accelerated Aging
ASTM G155
2004
1504.3.1 Wind Uplift FM 4470 1992
3. REFERENCES:
Entity
Examination
Reference
Date
PRI (TST 5878)
Physical Properties
PRIO1111
04/08/2002
PRI (TST 5878)
Physical Properties
PUSA-005-02-01
01/31/2002
PRI (TST 5878)
Physical Properties
PUSA-013-02-01
12/23/2002
PRI (TST 5878)
Physical Properties
PUSA-013-02-02
12/23/2002
PRI (TST 5878)
Physical Properties
PUSA-013-02-03
12/23/2002
PRI (TST 5878)
Physical Properties
PUSA-018-02-01
07/14/2003
PRI (TST 5878)
Physical Properties
PUSA-028-02-01
07/13/2005
PRI (TST 5878)
Physical Properties
PUSA-033-02-01
01/12/2006
PRI (TST 5878)
Physical Properties
PUSA-035-02-01
09/29/2006
PRI (TST 5878)
Physical Properties
PUSA-055-02-02
12/10/2007
PRI (TST 5878)
Physical Properties
PUSA-061-02-02
01/28/2008
PRI (TST 5878)
Physical Properties
PUSA-076-02-01
02/22/2008
PRI (TST 5878)
Physical Properties
PUSA-083-02-01
04/14/2008
PRI (TST 5878)
Physical Properties
PUSA-088-02-01
07/29/2009
MTI (TST 2508)
Physical Properties
JX20H7A
04/01/2008
MTI (TST 2508)
Physical Properties
RX14E8A
01/29/2009
ERD (TST 6049)
Physical Properties
11752.09.99-1
02/08/2000
ERD (TST 6049)
Physical Properties
02200.07.03
07/14/2003
ERD (TST 6049)
Physical Properties
P5110.04.07-1
04/11/2007
ERD (TST 6049)
Physical Properties
P13450.08.09
08/13/2009
ERD (TST 6049)
Physical Properties
P33360.06.10
06/25/2010
ICC-ES (EVL 2396)
IBC Compliance
ESR-1697
01/01/2005
ICC-ES (EVL 2396)
IBC Compliance
ESR-1160
03/01/2005
Miami -Dade (CER 1592)
HVHZ Compliance
NOA
Current
Polyglass USA
Manufacturing Affidavit
Products Current
02/18/2009
Polyglass USA
P/L Affidavit
Mule -Hide Cross Ltg
03/01/2008
UL (QUA1743)
Quality Control
File No. R14571, Vol 1
Exp. 11/30/2012
Exterior Research and Design, LLC. Evaluation Report P12060.02.09-R5
Certificate of Authorization #9503 FL5259-R10
Revision 5: 06/25/2010
Page 2 of 9
TRINITY ERD
4. PRODUCT DESCRIPTION:
4.1 Mechanically Fastened Underlayments:
4.1.1 ELASTOBASE is a fiberglass reinforced, SBS modified bitumen base sheet.
4.1.2 ELASTOBASE P is a polyester -reinforced, SBS modified bitumen base sheet.
4.2 Self -Adhering Underlayments:
4.2.1 POLYSTICK MTS is a rubberized asphalt waterproofing membrane, glass fiber reinforced, surfaced
with polyolefinic film surface.
�7 4.2.2 POLYSTICK IR-Xe is a rubberized asphalt waterproofing membrane, glass fiber reinforced, with a
sand surface.
4.2.3 POLYSTICK TU is a rubberized asphalt waterproofing membrane, glass fiber reinforced, with a
granular surface.
4.2.4 POLYSTICK TU Plus is a rubberized asphalt waterproofing membrane, glass fiber reinforced, with a
high strength polyester fabric surface.
4.2.5 POLYSTICK TU P is a rubberized asphalt waterproofing membrane, glass-fiber/polyester reinforced,
with a granular surface.
4.2.6 POLYFLEX SAP, POLYFLEX SAP FR, MULE -HIDE SA-APP CAP SHEET AND MULE -HIDE SA-APP CAP SHEET (FR)
are a polyester reinforced, APP modified bitumen cap sheets.
4.2.7 DUAL PROTM is a dual -layer rubberized asphalt waterproofing membranes, fiberglass reinforced,
with a high strength polyester fabric surface.
4.2.8 TILE PROTM is a dual -layer rubberized asphalt waterproofing membranes, fiberglass reinforced,
with a high strength polyester fabric surface.
4.3 Mechanically Fastened and/or Bonded Underlayments:
4.3.1 ELASTOFLEX S6G AND ELASTOFLEX S6G FR are polyester reinforced, SBS modified bitumen cap
sheets.
4.3.2 POLYFLEx G AND POLYFLEx G FR are polyester reinforced, APP modified bitumen cap sheets.
S. LIMITATIONS:
5.1 This Evaluation Report is not for use in the HVHZ.
5.2 Fire Classification is not part of this Laboratory Report; refer to current Approved Roofing
Materials Directory for fire ratings of this product.
5.3 Polyglass Roof Underlayments may be used with any prepared roof cover where the product is
specifically referenced within FBC approval documents. If not listed, a request may be made
to the AHJ for approval based on this evaluation combined with supporting data for the
prepared roof covering.
5.4 Allowable roof covers applied atop the underlayments are as follows:
Exterior Research and Design, LLC. Evaluation Report P12060.02.09-R5
Certificate of Authorization #9503 FL5259-R10
Revision 5: 06/25/2010
Page 3 of 9
TRINITY ERD
Table 1: Roof Cover Options
Underlayment
Asphalt
Shingles
Nail -On Tile
Foam -On
Tile
Metal
Wood
Shakes &
Shingles
Slate
Elastobase
Yes
Yes
No
Yes
Yes
Yes
Elastobase P
Yes
Yes
No
Yes
Yes
Yes
Polystick MTS
Yes
Yes
(Batten only)
No
Yes
Yes
Yes
Polystick IR-Xe
Yes
No
No
No
Yes
Yes
Polystick TU
Yes
Yes
Yes
No
Yes
Yes
Polystick TU P
Yes
Yes
Yes
No
Yes
Yes
Polystick TU Plus
Yes
Yes
Yes
Yes
Yes
Yes
Dual Pro
Yes
Yes
No
Yes
Yes
Yes
Tile Pro
Yes
Yes
No
Yes
Yes
Yes
Elastoflex S6G or S6G FR
Yes
Yes
Yes
No
Yes
Yes
Polyflex G or G FR
Yes
Yes
Yes
No
Yes
Yes
Polyflex SAP or SAP FR
Yes
Yes
Yes
No
Yes
Yes
Mule -Hide SA-APP Cap Sheet
or SA-APP Cap Sheet (FR)
Yes
Yes
Yes
No
Yes
Yes
5.4.1 "Foam -On Tile" is limited to use of the following Approved tile adhesives unless tensile
adhesion / long term aging data from an accredited testing laboratory is provided.
➢ Polyfoam PolyPro AH160: Polystick TU, Polystick TU P, Polystick TU Plus, Elastoflex S6G,
Elastoflex S6G FR, Polyflex G, Polyflex G FR, Polyflex SAP, Polyflex SA Cap FR, Mule -Hide
SA-APP Cap Sheet or Mule -Hide SA-APP Cap Sheet (FR).
➢ Dow TileBond: Polystick TU P or Polyflex SAP
5.4.1.1 The maximum design pressure for direct -bond Polystick self -adhering applications to plywood
or primed plywood is -135 psf. This is pertinent for foam -on tile systems only, where the
bonded underlayment forms part of the load -path.
5.4.2 For nail -on tile systems over Polystick MTS, battens are required for both loading / staging of
the tile and tile installation; direct -to -deck nail -on tile applications are not permissible with
Polystick MTS.
5.4.3 For mechanically attached metal and nail -on tile, an underlayment system consisting of
Polystick MTS followed by Polystick MTS, TU, TU P or TU Plus or Polystick SAP is permissible.
5.5 Allowable substrates are noted below:
5.5.1 Direct -Bond to Deck:
➢ Polystick, Polyflex SAP or SAP FR, Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR)
self -adhered to: ASTM D41 primed structural concrete; OSB; Southern Yellow Pine; New
untreated plywood; existing plywood primed as needed with ASTM D41 primer; or Huber
Engineered Woods "ZIP System" Panels (designed and installed to meet wind loads for
project).
➢ Dual Pro or Tile Pro self -adhered to: New untreated plywood; or existing plywood primed
as needed with ASTM D41 primer.
➢ Elastoflex S6G or S6G FR in hot asphalt to: ASTM D41 primed structural concrete.
➢ Polyflex G or G FR torch -applied to: ASTM D41 primed structural concrete.
Exterior Research and Design, LLC. Evaluation Report P12060.02.09-R5
Certificate of Authorization #9503 FL5259-R10
Revision 5: 06/25/2010
Page 4 of 9
TRINITY ERD
5.5.1.1 The maximum design pressure for direct -bond Polystick self -adhering applications to plywood
or primed plywood is -135 psf. This is pertinent for foam -on tile systems only, where the
bonded underlayment forms part of the load -path. For other substrates, consult Polyglass
USA, Inc.
5.5.2 Bond -to -Insulation:
➢ Polystick, Polyflex SAP or SAP FR, Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR)
self -adhered to: ASTM C1289, Type II, Class 1 polyisocyanurate or Type V
polyisocyanurate-composite insulation; DensDeck DuraGuard; DensDeck Prime; or
SECUROCK Gypsum -Fiber Roof Board.
➢ Elastoflex S6G or S6G FR in hot asphalt to: DensDeck Prime or SECUROCK Gypsum -Fiber
Roof Board.
➢ Polyflex G or G FR torch -applied to: ASTM D41 primed structural concrete; DensDeck
Prime or SECUROCK Gypsum -Fiber Roof Board.
For installation under mechanically attached prepared roof coverings, insulation shall be
attached per minimum requirements of the prepared roof covering manufacturer's Product
Approval. For installations under foam -on tile systems, insulation shall be designed by a
qualified design professional and installed based on testing of the insulation/underlayment
system in accordance with FM 4470, Appendix K or TAS 114, Appendix J.
5.5.3 Bond to Mechanically Attached Base Layer:
➢ Polystick, Polyflex SAP or SAP FR, Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR)
Dual Pro or Tile Pro self -adhered to: ASTM D226, Type I or II felt; Elastobase; Elastobase
P or Mule -Hide Nail Base.
➢ Elastoflex S6G or S6G FR in hot asphalt to: ASTM D226, Type I or II felt; Elastobase;
Elastobase P or Mule -Hide Nail Base.
➢ Polyflex G or G FR torch -applied to: Elastobase; Elastobase P or Mule -Hide Nail Base.
For installations under mechanically attached prepared roof coverings, base layer shall be
attached per minimum codified requirements. For installations under foam -on tile systems,
base layer shall be attached per minimum requirements of FRSA/TRI 07320/8-05 or RAS 120.
5.6 Exposure Limitations:
5.6.1 Elastobase, Elastobase P, Dual Pro or Tile Pro shall not be left exposed for longer than 30-
days after installation.
5.6.2 Polystick IR-Xe shall not be left exposed for longer than 90-days after installation.
5.6.3 Polystick MTS, TU, TU P or TU Plus shall not be left exposed for longer than 180-days after
installation.
5.6.4 Polyflex SAP or SAP FR, or Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR) does not
have an exposure limitation, unless the prepared roof covering is to be adhesive -set tile, in
which case the maximum exposure is 30 days.
5.6.5 Elastoflex S6G or S6G FR or Polyflex G or G FR does not have an exposure limitation, unless
the prepared roof covering is to be adhesive -set tile, in which case the maximum exposure is
180 days.
Exterior Research and Design, LLC. Evaluation Report P12060.02.09-115
Certificate of Authorization #9503 FL5259-R10
Revision 5: 06/25/2010
Page 5 of 9
TRINITY ERD
5.7 For tile roof installations governed by the FRSA/TRI 07320/8-05 Installation Manual, Fourth
Edition, use is limited to the following:
Table 2: Tile System Options for Roof Underlayments per FRSA/TRI 07320/8-OS
System
Underlay
Option
Section
Reference
Product(s)
1
3.02A
Modified Cap Sheet
Elastoflex S6G or S6G FR; Polyflex G or G FR
2
3.02B
No. 30 / Modified Cap
Elastobase; Elastobase P / Elastoflex S6G or S6G FR or
Sheet
Polyflex G or G FR
System One:
Mechanically
3
3.02C
No. 30 / Modified Cap
Sheet
Elastobase; Elastobase P /Elastoflex 56G or 56G FR
Fastened Tile,
4
3.02D
No. 30
Elastobase; Elastobase P
Unsealed or Sealed
Self -Adhered
Polystick MTS (batten only); TU; TU P; TU Plus; Polyflex
Underlayment
5
3.02E
Underlayment
SAP or SAP FR; Mule -Hide SA-APP Cap Sheet or SA-APP
System
Cap Sheet (FR); Dual Pro; Tile Pro
Elastobase; Elastobase P; Mule -Hide Nail Base / Polystick
6
3.02F
No. 30 / Self -Adhered
MTS (batten only); TU; TU P; TU Plus; Polyflex SAP or
Underlayment
SAP FR, Mule -Hide SA-APP Cap Sheet or SA-APP Cap
Sheet (FR); Dual Pro; Tile Pro
1
3.02A
Modified Cap Sheet
Elastoflex S6G or S6G FR; Polyflex G or G FR
2
3.02B
No. 30 / Modified Cap
Elastobase; Elastobase P / Elastoflex S6G or S6G FR or
Sheet
Polyflex G or G FR
System Two:
Mechanically
3
3.02C
No. 30 / Modified Cap
Sheet
Elastobase; Elastobase P / Elastoflex S6G or S6G FR
Fastened Tile,
Sealed
Self -Adhered
Polystick TU; TU P; TU Plus; Polyflex SAP or SAP FR;
Underlayment
4
3.02D
Underlayment
Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR);
System
Dual Pro; Tile Pro
Elastobase; Elastobase P; Mule -Hide Nail Base / Polystick
5
3.02E
No. 30 / Self -Adhered
TU; TU P; TU Plus; Polyflex SAP or SAP FR, Mule -Hide SA-
Underlayment
APP Cap Sheet or SA-APP Cap Sheet (FR) Dual Pro; Tile
Pro
1
3.02A
Modified Cap Sheet
Elastoflex S6G or S6G FR; Polyflex G or G FR
System Four "A":
2
3.02B
No. 30 / Modified Cap
Elastobase; Elastobase P / Elastoflex S6G or S6G FR or
Adhesive -Set Tile,
Sheet
Polyflex G or G FR
Unsealed or Sealed
4
3.02D
Self -Adhered
Polystick TU; TU P; TU Plus; Polyflex SAP or SAP FR;
Underlayment
Underlayment
Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR)
System
No. 30 / Self -Adhered
Elastobase; Elastobase P; Mule -Hide Nail Base / Polystick
5
3.02E
Underlayment
TU; TU P; TU Plus; Polyflex SAP or SAP FR, Mule -Hide SA-
APP Cap Sheet or SA-APP Cap Sheet (FR)
1
3.02A
No. 30 / Modified Cap
Elastobase; Elastobase P / Elastoflex S6G or S6G FR or
System Four "B":
Sheet
Polyflex G or G FR
Adhesive -Set Tile,
3
3.02C
Self -Adhered
Polystick TU; TU P; TU Plus; Polyflex SAP or SAP FR;
Sealed
Underlayment
Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR)
Underlayment
System
No. 30 / Self -Adhered
Elastobase; Elastobase P; Mule -Hide Nail Base / Polystick
4
3.02D
Underlayment
TU; TU P; TU Plus; Polyflex SAP or SAP FR, Mule -Hide SA-
APP Cap Sheet or SA-APP Cap Sheet (FR)
6. INSTALLATION:
6.1 Polyglass Roof Underlayments shall be installed in accordance with Polyglass published
installation requirements subject to the Limitations set forth in Section 5 herein and the
specifics noted below.
6.2 Re -fasten any loose decking panels, and check for protruding nail heads. Sweep the
substrate thoroughly to remove any dust and debris prior to application, and prime the
substrate (if applicable).
Exterior Research and Design, LLC. Evaluation Report P12060.02.09-R5
Certificate of Authorization #9503 FL5259-R10
Revision 5: 06/25/2010
Page 6 of 9
TRINITY ERD
6.3 Elastobase, Elastobase P or Mule -Hide Nail Base:
6.3.1 Shall be installed in compliance with the requirements for ASTM D226, Type II underlayment
in FBC Sections 1507 for the type of prepared roof covering to be installed.
6.3.2 For use in non -tile applications:
6.3.2.1 Reference is made to the current edition of the NRCA Steep -slope Roofing Manual and ARMA
recommendations for installing shingle underlayments and flashings
6.3.2.2 Elastobase, Elastobase P or Mule -Hide Nail Base may be covered with a layer of Polystick,
Polyflex SAP or SAP FR, Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR), Dual Pro or
Tile Pro, self -adhered, Elastoflex S6G or S6G FR in hot asphalt or Polyflex G or G FR, torch
applied.
6.3.3 For use in tile applications, reference is made to Polyglass published installation instructions in
conjunction with FRSA/TRI 07320/8-05 Installation Manual, Fourth Edition, and Table 2
herein.
6.4 Polystick MTS, IR-Xe, TU, TU P or TU Plus, Polyflex SAP or SAP FR, Mule -Hide SA-
APP Can Sheet or SA-APP Cat) Sheet (FR), Dual Pro or Tile Pro:
6.4.1 Shall be installed in compliance with the requirements for ASTM D1970 underlayment in FBC
Sections 1507 for the type of prepared roof covering to be installed.
6.4.2 For non -tile applications:
6.4.2.1 All self -adhering materials, with the exception of Polystick TU Plus, Polyflex SAP or SAP FR
and Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR) should be back -nailed in selvage
edge seam as per Polyglass / Mule -Hide Back Nailing Guide. Nails shall be corrosion resistant,
11 gauge ring -shank type with a minimum 1-inch diameter metal disk or Simplex -type metal
cap nail, at a minimum rate of 12" o.c. Polystick TU Plus should be back -nailed using the
above noted fasteners and spacing, in area marked "nail area, area para clavar" on the face of
membrane. The head lap membrane is to cover the area being back -nailed
6.4.2.2 All seal lap seams (selvage laps) must be firmly rolled with a minimum 28 lb. hand roller to
ensure full contact and adhesion. For Dual Pro and Tile Pro, align the edge of the top sheet to
the end of the glue pattern (the sheet will overlap the fabric).
View of Ovelap Seam of Dual Pro and Tile Pro
Exterior Research and Design, LLC. Evaluation Report P12060.02.09-115
Certificate of Authorization #9503 FL5259-RIO
Revision 5: 06/25/2010
Page 7 of 9
TRINITY ERD
6.4.2.3 All over -fabric and over -granule end -laps shall have a 6-inch wide, uniform layer of Polyglass
Polyplus 55 Premium Modified Flashing Cement, Polyglass Polyplus 50 Premium MB Flashing
Cement, Polyglass PG500 MB Flashing Cement, Mule -Hide 241 Premium Modified Flashing
Cement, Mule -Hide 251 Premium Wet/Dry Electrometric Flashing Cement, or Mule -Hide 421
Mod Bit Flashing Adhesive Trowel Grade mastic, applied in between the application of the lap.
6.4.2.4 Polystick TU Plus, Dual Pro and Tile Pro may not be used in any exposed application such as
crickets, exposed valleys, or exposed roof to wall details
6.4.2.5 Repair of Polystick membranes is to be accomplished by applying Polyglass Polyplus 55
Premium Modified Flashing Cement, Polyglass Polyplus 50 Premium MB Flashing Cement,
Polyglass PG500 MB Flashing Cement, Mule -Hide 241 Premium Modified Flashing Cement,
Mule -Hide 251 Premium Wet/Dry Elastomeric Flashing Cement, or Mule -Hide 421 Mod Bit
Flashing Adhesive Trowel Grade mastic to the area in need of repair, followed by a minimum 6
x 6 inch patch of the Polystick material of like kind, set and hand rolled in place over the
repair area. Patch laps, if needed, shall be installed in a water shedding manner.
6.4.2.6 All Polystick membranes shall be installed to ensure full contact with approved substrates.
Polyglass requires a minimum of 40-lb weighted -roller or, on steep slopes, use of a stiff
broom with approximately 40-lbs of load applied for the field membrane. Hand rollers are
acceptable for rolling of patches, laps (min. 28 lb roller) or small areas of the roof that are not
accessible to a large roller or broom.
6.4.3 For tile applications (not allowed for Polystick IR-Xe):
6.4.3.1 Reference is made to Section 6.4.2 herein in conjunction with FRSA/TRI 07320/8-05
Installation Manual, Fourth Edition, and Table 2 herein, using the instructions noted above as
a guideline.
6.4.3.2 For nail -on tile systems over Polystick MTS, battens are required for both loading / staging of
the tile and tile installation; direct -to -deck nail -on tile applications are not permissible with
Polystick MTS.
6.5 Elastoflex S6G or S6G FR:
6.5.1 Elastoflex S6G or S6G FR shall be installed in compliance with current Polyglass published
installation requirements. For use in tile applications, reference is made FRSA/TRI 07320/8-
05 Installation Manual, Fourth Edition, and Table 2 herein.
6.5.2 Elastoflex S6G or S6G FR shall be fully asphalt -applied to the substrates noted in Section 5.5.
Side laps shall be minimum 3-inch and end -laps minimum 6-inch wide, and off set end -laps
minimum 3 feet from course to course. Side and end laps shall be fully adhered in a complete
mopping of hot asphalt with asphalt extending approximately 3/8-inch beyond the lap edge.
6.6 Polyflex G or G FR:
6.6.1 Polyflex G or G FR shall be installed in compliance with current Polyglass published installation
requirements. For use in tile applications, reference is made FRSA/TRI 07320/8-05
Installation Manual, Fourth Edition, and Table 2 herein.
6.6.2 Polyflex G or G FR shall be fully asphalt -applied to the substrates noted in Section 5.5. Side
laps shall be minimum 3-inch and end -laps minimum 6-inch wide, and off set end -laps
minimum 3 feet from course to course. Side and end laps shall be fully heat -welded and
inspected to ensure minimum 3/8-inch flow of modified compound beyond the lap edge.
Exterior Research and Design, LLC. Evaluation Report P12060.02.09-R5
Certificate of Authorization #9503 FL5259-R10
Revision 5: 06/25/2010
Page 8 of 9
TRINITY ERD
6.7 Tile Staging:
6.7.1 A maximum of 6 tiles per stack are allowed when loading tile directly onto the underlayments.
Refer to the Polyglass Tile Loading Guidelines.
l
I
Fbof Deck prepared with
POLYSnCKTU Plus
6.7.2 Battens and/or Counter -battens, as required by the tile manufacturer and FRSA/TRI 07320/8-
05 must be used on all roof slopes of 7:12 or greater. For roof slopes in excess of 6�/4:12,
precautions should be taken, such as the use of battens to prevent tile sliding during the
loading process.
6.7.3 For nail -on tile systems over Polystick MTS, battens are required for both loading / staging of
the tile and tile installation; direct -to -deck nail -on tile applications are not permissible with
Polystick MTS.
6.7.4 The minimum cure time after installation of self -adhering membranes and before loading of
roofing tiles is forty-eight (48) hours.
7. LABELING:
Each unit shall bear a permanent label with the manufacturer's name, logo, city, state and logo of the
Accredited Quality Assurance Agency noted herein.
S. BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the
installation of this product.
9. MANUFACTURING PLANTS:
Contact the noted QA agency for information on product locations covered for F.A.C. Rule 9B-72 QA
requirements
10. QUALITY ASSURANCE ENTITY:
Underwriters Laboratories - QUA1743
(847) 664-3281
- END OF EVALUATION REPORT -
Exterior Research and Design, LLC. Evaluation Report P12060.02.09-R5
Certificate of Authorization #9503 FL5259-R10
Revision 5: 06/25/2010
Page 9 of 9