HomeMy WebLinkAboutFL9520_R7_AE_EvalReport836B
9/26/2017
Lucas A. Turner, P.E.
FL PE #58201
Evaluation Report 836B
September 26, 2017
Product Description: PVC 3” Mullion H-1758
Manufacturer: Custom Window Systems, Inc. 1900 SW 44th Ave, Ocala, FL 34474
Statement of Compliance: This report evaluates the above-listed product per the requirements of FAC
Product Approval Rule Chapter 61G20-3.005 (4). This product complies with the requirements of the 6th
Edition (2017) Florida Building Code including the High Velocity Hurricane Zone. The product testing
standards performed are outlined below.
Technical Documentation:
1) This report, prepared by Lucas A. Turner, P.E., at 1239 Jabara Ave., North Port, FL
2) Approval drawing CWS-836B, signed and sealed by Lucas A. Turner, P.E.
3) Test Reports NCTL-210-3833-1, -1A, -2, -2A, -3, and -3A, from National Certified Testing
Laboratories, Orlando, FL signed and sealed by Gerard J. Ferrara, P.E.
a. Testing Performed: TAS 201/202/203-94, ASTM E 1886-02/04/05, ASTM E 1996-
04/06/09, and AAMA 450-06
4) Supplemental Calcs. to support CWS-836B, signed and sealed by Lucas A. Turner, P.E.
Installation: Units must be installed according to approval document CWS-836B.
Limitations of Use: This product:
• May be used up to the sizes and design pressures as shown in CWS-836B, using clips as shown in
CWS-836B
• Is Large Missile Impact Resistant and does not require the use of shutters
• May be used in the High Velocity Hurricane Zone
• May only be used with Custom Window System, Inc. windows, please see separate individual
window unit approvals for applicable design pressures and for more details. The lower of the
individual window design pressures and the mullion design pressures shall apply to the entire
assembly.
• Requires 6063-T6 aluminum mullion and clip extrusions.
Certification of Independence: I do not have, nor do I intend to acquire, nor will I acquire, a financial
interest in Custom Window Systems or in any company manufacturing or distributing products for which
this report is being issued. I do not have, nor do I intend to acquire, nor will I acquire, a financial interest
in any other entity involved in the testing or approval process of this product.
URNER
ENGINEERING &
CONSULTING, INC.
T 1239 Jabara Ave.
North Port, FL 34288
Ph. 941-380-1574
FBPE C.O.A. #29779