HomeMy WebLinkAboutAPPROVED- ENERGY CALCEnergyGauge® USA 7.0.00 - FlaRes2020 FBC 7th Edition (2020) Compliant Software Page 1 of 68/18/2021 3:47 PM
Project Name:
Owner:
Builder Name:
Permit Office:
Jurisdiction: ST LUCIE COUNTY
ST LUCIE COUNTY
MCNALLY RESIDENCE
Street:
City, State, Zip: JENSEN BEACH , FL ,
357 NETTLES BLVD.
Permit Number:
Design Location: FL, Fort Pierce County: St. Lucie (Florida Climate Zone 2 )
1. New construction or existing
2. Single family or multiple family
3. Number of units, if multiple family
4. Number of Bedrooms
5. Is this a worst case?
6. Conditioned floor area above grade (ft²)
New (From Plans)
Detached
1
No
1098
7. Windows
a. U-Factor:
S H G C :
b. U-Factor:
S H G C :
c. U-Factor:
S H G C :
Sgl, U=0.65 185.94 ft²
SHGC=0.25
N/A f t ²
N/A f t ²
9. Floor Types
a. Raised Floor
b. Slab-On-Grade Edge Insulation
c. N/A
R=19.0 815.00 ft²
R=0.0 283.00 ft²
R=f t ²
10. Wall Types
a. Concrete Block - Int Insul, Exterior R=4.1 1368.70 ft²
b. Frame - Wood, Adjacent R=11.0 240.00 ft²
c. N/A R=f t ²
11. Ceiling Types
a. Roof Deck (Unvented)R=20.0 1098.00 ft²
f t ² R=b. N/A
c. N/A R = f t ²
12. Ducts
a. Sup: Attic, Ret: Attic, AH: Attic
13. Cooling systems
14. Heating systems
15. Hot water systems
a. Electric Cap: 1 gallons
b. Conservation features
None
d. N/A R=f t ²
Area Weighted Average Overhang Depth:4.988 ft.
Area Weighted Average SHGC:0.250
Description Area
Insulation Area
Insulation Area
Insulation Area
16. Credits None
3
(185.9 sqft.)
(1608.7 sqft.)
(1098.0 sqft.)
(1098.0 sqft.)
Conditioned floor area below grade (ft²) 0
a. Central Unit
a. Electric Strip Heat
k B t u / h r
18.8 SEER:16.00
Efficiency
k B t u / h r Efficiency
17.0 COP:1.00
f t ² R
6 125
Tankless
EF: 0.990
8. Skylights
c. U-Factor:(AVG)
S H G C ( A V G ) :
N/A
N/A
f t ²
Area
Glass/Floor Area: 0.169
Total Proposed Modified Loads:
Total Baseline Loads:
48.51
49.16 PASS
I hereby certify that the plans and specifications covered by
this calculation are in compliance with the Florida Energy
Code.
PREPARED BY:
DATE:
I hereby certify that this building, as designed, is in compliance
with the Florida Energy Code.
OWNER/AGENT:
DATE:
BUILDING OFFICIAL:
DATE:
Review of the plans and
specifications covered by this
calculation indicates compliance
with the Florida Energy Code.
Before construction is completed
this building will be inspected for
compliance with Section 553.908
Florida Statutes.
- Compliance requires certification by the air handler unit manufacturer that the air handler enclosure qualifies as
certified factory-sealed in accordance with R403.3.2.1.
- Compliance requires an Air Barrier and Insulation Inspection Checklist in accordance with R402.4.1.1 and this project requires
an envelope leakage test report with envelope leakage no greater than 5.00 ACH50 (R402.4.1.2).
FLORIDA ENERGY EFFICIENCY CODE FOR BUILDING CONSTRUCTION
Florida Department of Business and Professional Regulation - Residential Performance Method
FORM R405-2020
8-19-2021
PROJECT
Title:
Owner Name:
# of Units:
Builder Name:
Permit Office:
Jurisdiction: ST LUCIE COUNTY
ST LUCIE COUNTY
1
MCNALLY RESIDENCE
Family Type:
New/Existing:
Bedrooms:
Conditioned Area:
Total Stories:
Worst Case:
Rotate Angle:0
No
2
1098
3
New (From Plans)
Detached
Address Type:
Lot #
Block/Subdivision:
PlatBook:
Street:
County:
City, State, Zip:
FL ,
JENSEN BEACH ,
St. Lucie
357 NETTLES BLVD.
Street Address
Comment:
Building Type: User
Cross Ventilation:No
Whole House Fan:No
TMY Site
Design Temp Int Design Temp Heating Design Daily Temp
Design Location 2.5 %97.5 %Degree Days Moisture RangeWinter Summer
CLIMATE
90 70 75 299 62 Low39FL_VERO_BEACH_MUNIFL, Fort Pierce______
Number Name Area Volume
BLOCKS
1 Entire House 1098 8784
Number Name Area Volume
SPACES
Kitchen Occupants Bedrooms Cooled HeatedInfil ID Finished
1 CLST 3 13 104 No 0 Yes Yes1 No
2 BEDROOM 3 192 1536 No 0 1 Yes Yes1 Yes
3 BATH 3 64 508 No 0 Yes Yes1 Yes
4 GARAGE STORAG 14 112 No 0 Yes Yes1 Yes
5 KITCHEN 205 1640 Yes 0 Yes Yes1 Yes
6 GREAT RM 222 1776 No 0 Yes Yes1 Yes
7 M BATH 64 512 No 0 Yes Yes1 Yes
8 M BEDROOM 140 1120 No 0 1 Yes Yes1 Yes
9 BATH 2 50 400 No 0 Yes Yes1 Yes
10 BEDROOM 2 100 800 No 0 1 Yes Yes1 Yes
11 CLST 2 10 80 No 0 Yes Yes1 Yes
12 HALLWAY 24 192 No 0 Yes Yes1 No
# Floor Type Area Tile Wood Carpet
FLOORS
Perimeter R-Value Joist R-ValueSpace Perimeter
1 13 ft² 1 0 0______ Slab-On-Grade Edge Insulation - - - -1 ft CLST 3
2 192 ft² 1 0 0______ Slab-On-Grade Edge Insulation - - - -29 ft BEDROOM 3
3 64 ft² 1 0 0______ Slab-On-Grade Edge Insulation - - - -18.4 ft BATH 3
4 14 ft² 1 0 0______ Slab-On-Grade Edge Insulation - - - -2 ft GARAGE STORA
5 205 ft² 1 0 0______19Raised Floor 19 - - - - - - - -KITCHEN
8/18/2021 3:47 PM EnergyGauge® USA 7.0.00 - FlaRes2020 FBC 7th Edition (2020) Compliant Software Page 2 of 6
FORM R405-2020 INPUT SUMMARY CHECKLIST REPORT
# Floor Type Area Tile Wood Carpet
FLOORS
Perimeter R-Value Joist R-ValueSpace Perimeter
6 222 ft² 1 0 0______19Raised Floor 19 - - - - - - - -GREAT RM
7 64 ft² 1 0 0______19Raised Floor 19 - - - - - - - -M BATH
8 140 ft² 1 0 0______19Raised Floor 19 - - - - - - - -M BEDROOM
9 50 ft² 1 0 0______19Raised Floor 19 - - - - - - - -BATH 2
10 100 ft² 1 0 0______19Raised Floor 19 - - - - - - - -BEDROOM 2
11 10 ft² 1 0 0______19Raised Floor 19 - - - - - - - -CLST 2
12 24 ft² 1 0 0______19Raised Floor 19 - - - - - - - -HALLWAY
# Type Materials Color Absor.
Roof Solar Deck
Insul.
Pitch
ROOF
Tested
Roof
Area
Gable
Area
Emitt
Tested
EmittSA
(deg)
Rad
Barr
1 Hip Metal 1190 ft² Light 0.3 20 22.62______No0 ft² 0.9 NoN
ATTIC
# Type Ventilation Area RBS IRCCVent Ratio (1 in)
______ 1 Full attic Unvented 1098 ft² N N0
# Ceiling Type R-Value Area Framing Frac Truss Type
CEILING
Space Ins Type
1 Under Attic (Unvented)0 13 ft² 0.1 Wood______CLST 3 Blown
2 Under Attic (Unvented)0 192 ft² 0.1 Wood______BEDROOM 3 Blown
3 Under Attic (Unvented)0 64 ft² 0.1 Wood______BATH 3 Blown
4 Under Attic (Unvented)0 14 ft² 0.1 Wood______GARAGE STORA Blown
5 Under Attic (Unvented)0 205 ft² 0.1 Wood______KITCHEN Blown
6 Under Attic (Unvented)0 222 ft² 0.1 Wood______GREAT RM Blown
7 Under Attic (Unvented)0 64 ft² 0.1 Wood______M BATH Blown
8 Under Attic (Unvented)0 140 ft² 0.1 Wood______M BEDROOM Blown
9 Under Attic (Unvented)0 50 ft² 0.1 Wood______BATH 2 Blown
10 Under Attic (Unvented)0 100 ft² 0.1 Wood______BEDROOM 2 Blown
11 Under Attic (Unvented)0 10 ft² 0.1 Wood______CLST 2 Blown
12 Under Attic (Unvented)0 24 ft² 0.1 Wood______HALLWAY Blown
WALLS
#Wall Type R-Value Area
Adjacent Framing Solar
Ornt Fraction Absor.
HeightWidth
Ft In Ft InTo
Cavity Sheathing
R-ValueSpace Grade%
Below
1 11 0CLST 3 0002 8W Frame - Wood 0.30.1Garage16.0 ft² ____
2 11 0CLST 3 0002 8N Frame - Wood 0.30.1Garage16.0 ft² ____
3 4.1 0BEDROOM 3 00013 8SE Concrete Block - Int Insul 0.30Exterior104.0 ft² ____
4 4.1 0BEDROOM 3 00016 8S Concrete Block - Int Insul 0.30Exterior128.0 ft² ____
8/18/2021 3:47 PM EnergyGauge® USA 7.0.00 - FlaRes2020 FBC 7th Edition (2020) Compliant Software Page 3 of 6
FORM R405-2020 INPUT SUMMARY CHECKLIST REPORT
WALLS
#Wall Type R-Value Area
Adjacent Framing Solar
Ornt Fraction Absor.
HeightWidth
Ft In Ft InTo
Cavity Sheathing
R-ValueSpace Grade%
Below
5 11 0BEDROOM 3 00013 8NW Frame - Wood 0.30.1Garage104.0 ft² ____
6 11 0BEDROOM 3 0006 8N Frame - Wood 0.30.1Garage48.0 ft² ____
7 4.1 0BATH 3 0009 8N Concrete Block - Int Insul 0.30Exterior72.0 ft² ____
8 4.1 0BATH 3 0069 8E Concrete Block - Int Insul 0.30Exterior76.0 ft² ____
9 4.1 0GARAGE ST 0002 8N Concrete Block - Int Insul 0.30Exterior16.0 ft² ____
10 11 0GARAGE ST 0007 8W Frame - Wood 0.30.1Garage56.0 ft² ____
11 4.1 0KITCHEN00022 8N Concrete Block - Int Insul 0.30Exterior176.0 ft² ____
12 4.1 0KITCHEN00510 8E Concrete Block - Int Insul 0.30Exterior83.3 ft² ____
13 4.1 0GREAT RM 00013 8SE Concrete Block - Int Insul 0.30Exterior104.0 ft² ____
14 4.1 0GREAT RM 00016 8S Concrete Block - Int Insul 0.30Exterior128.0 ft² ____
15 4.1 0M BATH 0008 8S Concrete Block - Int Insul 0.30Exterior64.0 ft² ____
16 4.1 0M BEDROOM 00014 8S Concrete Block - Int Insul 0.30Exterior112.0 ft² ____
17 4.1 0M BEDROOM 00513 8NW Concrete Block - Int Insul 0.30Exterior107.3 ft² ____
18 4.1 0BATH 2 0005 8N Concrete Block - Int Insul 0.30Exterior40.0 ft² ____
19 4.1 0BEDROOM 2 0007 8N Concrete Block - Int Insul 0.30Exterior56.0 ft² ____
20 4.1 0BEDROOM 2 00910 8W Concrete Block - Int Insul 0.30Exterior86.0 ft² ____
21 4.1 0CLST 2 0002 8N Concrete Block - Int Insul 0.30Exterior16.0 ft² ____
# Ornt Panes NFRC U-Factor SHGC Area Depth Separation Int ShadeFrame Screening
WINDOWS
Overhang
Orientation shown is the entered, Proposed orientation.
Wall
ID Imp
1 SE Low-E Single 0.65 0.25 19.4 ft² 8 ft 0 in 1 ft 4 in NoneMetal None______Yes3 Y
2 SE Low-E Single 0.65 0.25 39.4 ft² 8 ft 0 in 1 ft 4 in NoneMetal None______Yes3 Y
3 N Low-E Single 0.65 0.25 9.0 ft² 8 ft 0 in 1 ft 4 in NoneMetal None______Yes11 Y
4 E Low-E Single 0.65 0.25 18.0 ft² 1 ft 0 in 1 ft 4 in NoneMetal None______Yes12 Y
5 SE Low-E Single 0.65 0.25 17.5 ft² 8 ft 0 in 1 ft 4 in Drapes/blindsMetal Exterior 5______Yes13 Y
6 SE Low-E Single 0.65 0.25 20.6 ft² 8 ft 0 in 1 ft 4 in Drapes/blindsMetal Exterior 5______Yes13 Y
7 S Low-E Single 0.65 0.25 18.0 ft² 1 ft 0 in 1 ft 4 in Drapes/blindsMetal Exterior 5______Yes14 Y
8 S Low-E Single 0.65 0.25 4.0 ft² 1 ft 0 in 1 ft 4 in NoneMetal None______Yes15 Y
9 NW Low-E Single 0.65 0.25 18.0 ft² 1 ft 0 in 1 ft 4 in NoneMetal None______Yes17 Y
10 N Low-E Single 0.65 0.25 4.0 ft² 1 ft 0 in 1 ft 4 in NoneMetal None______Yes18 Y
11 W Low-E Single 0.65 0.25 18.0 ft² 1 ft 0 in 1 ft 4 in NoneMetal None______Yes20 Y
# Floor Area Ceiling Area Exposed Wall Perimeter Avg. Wall Height Exposed Wall Insulation
GARAGE
1 756 ft² 756 ft² 30 ft 8 ft 11______
8/18/2021 3:47 PM EnergyGauge® USA 7.0.00 - FlaRes2020 FBC 7th Edition (2020) Compliant Software Page 4 of 6
FORM R405-2020 INPUT SUMMARY CHECKLIST REPORT
Method CFM 50 ACH 50ELASLAScope
INFILTRATION
ACHEqLA#
731.7 540.14.000254Wholehouse .11975.36Proposed ACH(50)1
HEATING SYSTEM
# System Type Efficiency Capacity DuctsSubtypeBlockSpeed
1 Electric Strip Heat/COP:1 17 kBtu/hr ______sys#1None1
# System Type Efficiency Capacity Air Flow SHR
COOLING SYSTEM
DuctsSubtypeBlockSubtype
1 Central Unit/SEER: 16 18.8 kBtu/hr 564 cfm 0.8______sys#1Split1 Single
# System Type EF Cap Use SetPnt Conservation
HOT WATER SYSTEM
SubType Location
1 Electric 0.99 1 gal 55.1 gal 120 deg None______Tankless Garage
FSEC
Company Name System Model #Collector Model #
Collector
SOLAR HOT WATER SYSTEM
Storage
FEFCert #Area Volume
None None f t ² ______
# Location R-Value Area Location Area
---- Supply -------- Return ----
Leakage Type Handler
CFM 25Air
QN RLF
DUCTS
Heat Cool
HVAC #
TOT OUT
CFM25
1 Attic 6 125 ft² Attic 13 ft² Default Leakage Attic (Default) c______1 1 (Default) c
TEMPERATURES
Programable Thermostat: N Ceiling Fans:
Cooling [ ] Jan [ ] Feb [ ] Mar [ ] Apr [ ] May [X] Jul [X] Aug [X] Sep [ ] Oct [ ] Nov [ ] Dec
[ ] Dec
[X] Dec[X] Nov
[X] Nov
[ ] Oct
[X] Oct
[ ] Sep
[ ] Sep
[ ] Aug
[ ] Aug
[ ] Jul
[ ] Jul[ ] Jun
[ ] Jun
[X] Jun
[ ] May
[ ] May
[ ] Apr
[X] Apr
[X] Mar
[X] Mar
[X] Feb
[ ] Feb
[X] Jan
[ ] Jan
Heating
Venting
8/18/2021 3:47 PM EnergyGauge® USA 7.0.00 - FlaRes2020 FBC 7th Edition (2020) Compliant Software Page 5 of 6
FORM R405-2020 INPUT SUMMARY CHECKLIST REPORT
Thermostat Schedule:HERS 2006 Reference Hours
Schedule Type 1 2 3 4 5 6 7 8 9 10 11 12
Cooling (WD)AM
PM
78
80
78
80
78
80
78
80
78
78
78
78
78
78
78
78
80
78
80
78
80
78
80
78
Cooling (WEH)AM
PM
78
80
78
80
78
80
78
80
78
78
78
78
78
78
78
78
80
78
80
78
80
78
80
78
Heating (WD)AM
PM
65
68
65
68
65
68
65
68
65
68
65
68
65
68
68
68
68
68
68
68
68
68
68
68
Heating (WEH)AM
PM
65
68
65
68
65
68
65
68
65
68
65
68
65
68
68
68
68
68
68
68
68
68
68
68
MASS
Mass Type Area Thickness Furniture Fraction Space
Default(8 lbs/sq.ft.0 ft² 0 ft 0.3 CLST 3
Default(8 lbs/sq.ft.f t ² f t 0.3 BEDROOM 3
Default(8 lbs/sq.ft.f t ² f t 0.3 BATH 3
Default(8 lbs/sq.ft.f t ² f t 0.3 GARAGE STORAG
Default(8 lbs/sq.ft.f t ² f t 0.3 KITCHEN
Default(8 lbs/sq.ft.f t ² f t 0.3 GREAT RM
Default(8 lbs/sq.ft.f t ² f t 0.3 M BATH
Default(8 lbs/sq.ft.f t ² f t 0.3 M BEDROOM
Default(8 lbs/sq.ft.f t ² f t 0.3 BATH 2
Default(8 lbs/sq.ft.f t ² f t 0.3 BEDROOM 2
Default(8 lbs/sq.ft.f t ² f t 0.3 CLST 2
Default(8 lbs/sq.ft.f t ² f t 0.3 HALLWAY
8/18/2021 3:47 PM EnergyGauge® USA 7.0.00 - FlaRes2020 FBC 7th Edition (2020) Compliant Software Page 6 of 6
FORM R405-2020 INPUT SUMMARY CHECKLIST REPORT
357 NETTLES BLVD., JENSEN BEACH, FL,
EnergyGauge® USA 7.0.00 - FlaRes2020 FBC 7th Edition (2020) Compliant Software
ENERGY PERFORMANCE LEVEL (EPL) DISPLAY CARD
ESTIMATED ENERGY PERFORMANCE INDEX* = 99
The lower the EnergyPerformance Index, the more efficient the home.
1. New construction or existing
2. Single family or multiple family
3. Number of units, if multiple family
4. Number of Bedrooms
5. Is this a worst case?
6. Conditioned floor area (ft²)
New (From Plans)
Detached
1
3
No
1098
7. Windows**
a. U-Factor:
S H G C :
b. U-Factor:
S H G C :
c. U-Factor:
S H G C :
d. U-Factor:
S H G C :
Sgl, U=0.65 185.94 ft²
SHGC=0.25
N/A f t ²
N/A f t ²
N/A f t ²
9. Floor Types
a. Raised Floor
b. Slab-On-Grade Edge Insulation
c. N/A
R=19.0 815.00 ft²
R=0.0 283.00 ft²
R= f t ²
10. Wall Type and Insulation
a. Concrete Block - Int Insul, Exterior R=4.1 1368.70 ft²
b. Frame - Wood, Adjacent R=11.0 240.00 ft²
c. N/A R= f t ²
11. Ceiling Type and insulation level
a. Roof Deck (Unvented) R=20.0 1098.00 ft²
f t ² R=b. N/A
c. N/A R = f t ²
12. Ducts, location & insulation level
13. Cooling systems
14. Heating systems k B t u / h r
15. Hot water systems
a. Electric Cap: 1 gallons
EF: 0.99
b. Conservation features
None
d. N/A R= f t ²
Description Area
Insulation Area
Insulation Area
Insulation Area
Credits (Performance method)None
Area Weighted Average Overhang Depth:
Area Weighted Average SHGC:
4.988 ft.
0.250
a. Electric Strip Heat 17.0 COP:1.00
a. Central Unit 18.8 SEER:16.00
k B t u / h r
Efficiency
Efficiency
a. Sup: Attic, Ret: Attic, AH: Attic 6 125
R f t ²
8. Skylights
a. U-Factor(AVG):
S H G C ( A V G ) :
Description Area
N/A
N/A
f t ²
I certify that this home has complied with the Florida Energy Efficiency Code for Building
Construction through the above energy saving features which will be installed (or exceeded)
in this home before final inspection. Otherwise, a new EPL Display Card will be completed
based on installed Code compliant features.
Builder Signature:Date:
Address of New Home:City/FL Zip:
*Note: This is not a Building Energy Rating. If your Index is below 70, your home may qualify for energy efficient
mortgage (EEM) incentives if you obtain a Florida Energy Rating. For information about the Florida Building Code,
Energy Conservation, contact the Florida Building Commission's support staff.
**Label required by Section R303.1.3 of the Florida Building Code, Energy Conservation, if not DEFAULT.
Page 1 of 1
FORM R405-2020
8/18/2021 3:48 PM
Project Name:
Owner:
Builder Name:
Permit Office:
Jurisdiction: ST LUCIE COUNTY
ST LUCIE COUNTY
MCNALLY RESIDENCE
Street:
City, State, Zip: JENSEN BEACH , FL ,
357 NETTLES BLVD.
Permit Number:
Design Location: FL, Fort Pierce CHECKAIR BARRIER CRITERIA
A continuous air barrier shall be installed in the building envelope.
The exterior thermal envelope contains a continuous air barrier.
Breaks or joints in the air barrier shall be sealed.
The air barrier in any dropped ceiling/soffit shall be aligned with the
insulation and any gaps in the air barrier shall be sealed.
Access openings, drop down stairs or knee wall doors to
unconditioned attic spaces shall be sealed.
The junction of the foundation and sill plate shall be sealed.
The junction of the top plate and the top of exterior walls shall be sealed.
Knee walls shall be sealed.
The space between window/door jambs and framing, and
skylights and framing shall be sealed.
Rim joists shall include the air barrier.
The air barrier shall be installed at any exposed edge of insulation.
Exposed earth in unvented crawl spaces shall be covered with a
Class I vapor retarder with overlapping joints taped.
Duct shafts, utility penetrations, and flue shafts opening to exterior
or unconditioned space shall be sealed.
Narrow cavities
Shafts, penetrations
Crawl space walls
Floors
(including
above-garage
and cantilevered floors)
Rim joists
Windows, skylights
Walls
Ceiling/attic
General
COMPONENT
Garage separation
Recessed lighting
Plumbing and wiring
S h o w e r / t u b
HVAC register boots HVAC supply and return register boots that penetrate building thermal
envelope shall be sealed to the sub-floor, wall covering or ceiling
The air barrier shall be installed behind electrical or communication
boxes or air-sealed boxes shall be installed.
The air barrier installed at exterior walls adjacent to showers and
tubs shall separate them from the showers and tubs.
Batt insulation shall be cut neatly to fit around wiring and
plumbing in exterior walls, or insulation that on
installation readily conforms to available space shall
extend behind piping and wiring.
Recessed light fixtures installed in the building thermal envelope shall
be sealed to the finished surface.
Air sealing shall be provided between the garage and conditioned spaces.
When required to be sealed, concealed fire sprinklers shall only be sealed
in a manner that is recommended by the manuf acturer. Caulking or other
adhesive sealants shall not be used to fill voids between fire sprinkler
cover plates and walls or ceilings.
C o n c e a l e d
Electrical/phone box on
exterior walls
Batts in narrow cavities shall be cut to fit, or narrow
cavities shall be filled by insulation that on installation
readily conforms to the available cavity spaces.
TABLE 402.4.1.1
AIR BARRIER AND INSULATION INSPECTION COMPONENT CRITERIA
INSULATION INSTALLATION CRITERIA
EnergyGauge® USA 7.0.00 - FlaRes2020 FBC 7th Edition (2020) Compliant Software8/18/2021 3:48 PM Page 1 of 1
Air-permeable insulation shall
not be used as a sealing material.
The insulation in any dropped ceiling/soffit
shall be aligned with the air barrier.
Cavities within corners and headers of frame walls
shall be insulated by completely filling the cavity with a
material having a thermal resistance of R-3 per inch
minimum.
Exterior thermal envelope insulation for framed walls
shall be installed in substantial contact and continuous
alignment with the air barrier.
Rim joists shall be insulated.
Floor framing cavity insulation shall be installed to
maintain permanent contact with the underside of
subfloor decking, or floor framing cavity insulation shall
be permitted to be in contact with the top side of
sheathing, or continuous insulation installed on the
underside of floor framing and extends from the bottom
to the top of all perimeter floor framing members.
and doors
on exterior wall
requirements
Recessed light fixtures installed in the building
thermal envelope shall be air tight and IC rated.
sprinklers
Where provided instead of floor insulation, insulation
shall be permanently attached to the crawlspace walls.
Exterior walls adjacent to showers and tubs shall be
insulated.
2020 - AIR BARRIER AND INSULATION INSPECTION COMPONENT CRITERIA
a. In addition, inspection of log walls shall be in accordance with the provisions of ICC-400.
a