HomeMy WebLinkAbout30LB FELT (2) CONSTRUCTION MATERIALS
LABORATORY TEST RESULTS r
TECH N 0 L 0 G I E S
Report for: Gardner Gibson Attention: Matt Mullins
4146 E. 711 Avenue
Tampa, FL 33605
Product Name(s): NO.30 ASTM Manufacturer: Gardner Gibson
PRI-CMT Project No.: GGi-207-02-01 Source: Gardner Gibson
Date Received: January 31, 2018 Dates Tested: Feb. 26, 2018—Mar. 5, 2018
Purpose: Evaluate NO. 30 ASTM for compliance with the physical properties of ASTM
D 226 Asphalt-Saturated Felt Used in Roofing and Waterproofing,
Type 11.
Test Methods: Testing was completed as described in ASTM D 226-09: Standard
Specification for Asphalt-Saturated Organic Felt Used in Roofing and
Natemroofing. Test methods assigned or referenced include ASTM D 70:
Standard Test Method for Density of Semi-Solid Bituminous Materials
(Pycnometer Method);ASTM D 146: Standard Test Methods for Sampling and
Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and
Waterproofing: and ASTM D 6136: Standard Test Method for Kerosine
Number of Unsaturated(Dry)Felt by Vacuum Method.
Sampling: Product samples were provided by Gardner Gibson in Tampa, FL
GG1-207-02-C•=
The test results,opinions,or interpretations are based on the material supplied by the client. This report is for the exclusive use of
stated client. No reproduction or facsimile in any form can be made without the client's permission. This report shall not be reproduced
except in full without the written approval of this laboratory. PRI Construction Materials Technologies LLC assumes no responsibility
nor makes a performance or warranty statement for this material or products and processes containing this material in connection:
with this report_
PRI Construction Materials Technologies LLC 6412 Badger Drive Tampa,FL 33610 Tet:813-621-5777 Fax:813-621-5840 e-mail:matedalstesting@pdcmt.com WebSite:httpa/www.pricmi.com
Gardner Gibson
ASTM D 226 for
NO.30 ASTM
Page 2 of 3
Results: ASTM D 226
Property ..
e r-
Physical Requirements
Breaking Strength (Ibf/in-width)
20 specimens; V x 6"x thickness;
j Cond. 2h @ 73.4±3.6°F&50±5%RH; ASTM D 146
Test @ 73.4±3.6°F; Rate=2in/min
Longitudinal(with fiber grain) 69 >_30 >_40
Transverse(across fiber grain) 32 15 ?20
Pliability(Pass/Failj
10 specimens; 1"x 8"x thickness; ASTM D 146 %"radius 31"radius
Cond. 10-15min in water @ 77±1.8°F;
Test 90'around %Z" radius in 2s
Longitudinal (with fiber grain) Pass No Failures No Failures
Transverse(across fiber grain) Pass No Failures No Failures
Loss on Heating(weight%)
2 specimens; 12"x 6"x thickness; ASTM D 146 1 <_4 <_4
Test Cond.221±5°F for 5h±3min
Dimensions and Masses
Width of Roll(in) ASTM D 146 36 36±114 36±1/4
Area, min(ftz) ASTM D 146 217 432 216
Moisture at Point of Manufacture(%) ASTM D 146 NT 5 4.3 5 4.1
As Received' 1.0 54.3 <_4A
Net Mass of Saturated Felt(lb/100ft2) ASTM D 146 26 >_11.5 >_26
Mass of Saturant(lb/100ft2) ASTM D 146 15.0 >_6.2 ? 15.0
Mass Ratio of Saturant to Desaturated Felt ASTM D 226 1.5 >_ 1.2 >_ 1.5
Saturation Efficiency(%) ASTM D 226 71 >_70 •..
Mass of Desaturated Felt(lb/100ft2) ASTM D 146 10.0 _>5.2 ? 10.0
Ash (%) ASTM D 146 9.0 5 10.0 10.0
Continued on Following Page
GGI-207-02-04
The test results,opinions,or interpretations are based on the material supplied by the client. This report is for the exclusive use of
stated client. No reproduction or facsimile in any form can be made without the client's permission. This report shall not be reproduced
except in full without the written approval of this laboratory. PRI Construction Materials Technologies LLC assumes no responsibility
nor makes a performance or warranty statement for this material or products and processes containing this material in connection
with this report.
PRI Construction Materials Technologies LLC 6412 Badger Drive Tampa,FL 33610 Tel:813-621-5777 Fax:813-621-5840 e-mail:mat dalstesbng@pricmLcom WebSite:http:itwww.pricmt.com
Gardner Gibson
ASTM D 226 for
NO.30 ASTM
Page 3 of 3
Propertys•
Type I Type
Perforated Felt(in2) ASTM D 226 NA <_0.05
Average Venting Area (%) ASTM D 226 NA ?0.1 ••.
Other
Unrolling @ 50°F and 140°F[Pass/Fa ] ASTM D 226 Pass FNo Damage FNo Damage
Note(s): 1- Moisture(As Received)was utilized in lieu of Moisture at Point of Manufacture;
NT- Not Tested;
NA- Not Applicable
Statement of Compliance:
The product was tested has demonstrated compliance with the physical requirements of Type 11 prescribed
in ASTM D 226-09: Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and
Waterproofing.
• ��/�
Signed: Signed: t /
i4 Jason immons Due T.Nguyen
Director Florida Registered Professional Engineer
PE No.:66034
Date: 3! ll� Date: / C tJ riT N N
No 65034
Report Issue History:
Issue# Date Pages Revision Description if applicabI4
4 '13•.
"4f
OF
Original 03/08/2018 3 NA `• 1 ' _ - `
END OF REPORT
GGI-207-02-04
The test results,opinions,or interpretations are based on the material supplied by the client. This report is for the exclusive use of
stated client. No reproduction or facsimile in any form can be made without the client's permission. This report shall not be reproduced
except in full without the written approval of this laboratory. PRI Construction Materials Technologies LLC assumes no responsibility
nor makes a performance or warranty statement for this material or products and processes containing this material in connection
with this report.
PRI Construction Materials Technologies LLC 6412 Badger Drive Tampa,FL 33610 Tel:813-621-5777 Fax:813-621-5840 e-mail:materialstesting@pricmt.com WebSite:http:i/w w.pricmt.corr,