HomeMy WebLinkAboutPRODUCT APPROVAL - ROOFING ACCSSESORIES 1/20/2021 Florida Building Code Online
j
BCIS Home Log In User Registration Hot Topics Submit Surcharge Stats&Facts Publications Contact Us BCIS Site M<'
1 brir:;
Product Approval
USER: Public User
Product Agoroval Menu>Product or Application Search >9Rolication List>Application Detail
FL# FL21414-R5
Application Type Revision
Code Version 2020
Application Status Approved
*Approved by DBPR. Approvals by DBPR shall be review(
the POC and/or the Commission if necessary.
Comments
Archived
Product Manufacturer CertainTeed, LLC (Roofing)
Address/Phone/Email 20 Moores Road
Malvern, PA 19355
(610) 893-5400
mark.d.harner@saint-gobain.com
Authorized Signature Mark Harner
mark.d.harner@saint-gobain.com
Technical Representative Mark D. Harner
Address/Phone/Email 18 Moores Road
Malvern, PA 19355
(610) 651-5847
Mark.D.Harner@saint-gobain.com
Quality Assurance Representative
Address/Phone/Email
Category Roofing
Subcategory Roofing Accessories that are an Integral Part of the Roofi
Compliance Method Certification Mark or Listing
Certification Agency Miami-Dade BCCO - CER
Validated By Robert Nieminen, PE, NEMO ETC, LLC
Validation Checklist- Hardcopy Received
Referenced Standard and Year(of Standard) Standard Yg
ASTM D1929 20
ASTM D2843 20
ASTM D635 20
ASTM D638 20,
ASTM G155 20
https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgtgHSol0oKvoeIJYzjWepAO4NrdH6rFQIWli3%2f7aZ73pg%3d%3d 1/3
1/20/2021 Florida Building Code Online
TAS 100(A) 19,
Equivalen e of Product Standards
Certified y
Product Approval Method Method 1 Option A
Date Submitted 11/06/2020
Date Validated 11/06/2020
Date Pending FBC Approval
Date Approved 11/16/2020
,Summqnr of Products
FL# Model, Number or Name Description
21414.1 CertainTeed Ridge Vent- 12" Polypropylene plastic low profile ridge vent wi
Unfiltered plug for Installation In asphaltic shingle roof s
Limits of Use Certification Agency Certificate
Approved for use in HVHZ: Yes FL21414 R5 C CAC NOA 20072340 RIDGE
Approved for use outside HVHZ: Yes : UNFILTERED.pdf
Impact Resistant: N/A Quality Assurance Contract Expiration De
Design Pressure: N/A 09/23/2024
Other: Refer to Miami-Dade Notice of Acceptance (NOA) for Installation Instructions
Limits of Use. FL21414 R5 II NOA 20072340 RIDGE VENT
UNFILTERED.pdf
i Verified By: Miami-Dade BCCO - CER
l Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party:
21414.2 CertainTeed Ridge Vent 12" Filtered High density polypropylene low profile attic rig
and CertainTeed Ridge Vent 9" installation in shingle roof systems.
Filtered
Limits of Use Certification Agency Certificate
Approved for use in HVHZ: Yes FL21414 R5 C CAC NOA 20072337 RIDGE
Approved for use outside HVHZ: Yes FILTERED AND 9-IN FILTERED.pdf
Impact Resistant: N/A Quality Assurance Contract Expiration Dz
Design Pressure: N/A 06/14/2022
Other: Refer to Miami-Dade Notice of Acceptance (NOA) for Installation Instructions
Limits of Use. FL21414 R5 II NOA 20072 37 RIDGE VENT
AND 9-IN FILTERED.W
Verified By: Miami-Dade BCCO - CER
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party:
21414.3 CertainTeed Rolled Ridge Vent Unfiltered and filtered, low profile attic ridge N
Installation under ridge shingles
Limits of Use Certification Agency Certificate
j Approved for use in HVHZ: Yes FL21414 R5 C CAC NOA 20072339 ROLLE[
1 Approved for use outside HVHZ: Yes Quality Assurance Contract Expiration Da
ImpactResistant: N/A 05/02/2024
DesignPressure: N/A Installation Instructions
Other: Refer to Miami-Dade Notice of Acceptance (NOA) for FL21414 R5 II NOA 20072339 ROLLED RID
Limits of Use. Verified By: Miami-Dade BCCO - CER
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party:
21414.4 CertainTeed Static Vent- Aluminum Embossed aluminum static louvered roof vent
https:ltwww.floridabuilding.org/prlpr-ap dti.aspx?param=wGEVXQwtDqtgHSolOoKvoelJYzjWepAO4NrdH6rFQIWli3%2f7aZ73pg%3d%3d 2/3
1/20/2021 Florida Building Code Online
.......... ----------__----------
Limits of Use
Certification Agency Certificate
i Approved for use In HVHZ: Yes
FL21414 R5 C CAC NOA 20072338 STATIC
Approved for use outside HVHZ: Yes ALUMINUM.pif
Impact Resistant: N/A ' Quality Assurance Contract Expiration Da
Design Pressure: N/A 1 03/13/2023
Other: Refer to Miami-Dade Notice of Acceptance (NOA)for Installation Instructions
Limits of Use. FL21414 R5 II NOA 20072318 STATIC VEN
Verified By: Miami-Dade BCCO - CER
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party:
Contact Us 2601 Blair Stone Road,Tallahassee FL 32399 Rhone:850-487-1824
The State of Florida Is an AA/EEO employer.Q ht 2007-2013 State of Florida. :: Privacy_Statement::Accessibility_Statement:: Re
Under Florida law,email addresses are public records.If you do not want your e-mail address released in response to a public-records request,
mail to this entity.Instead,contact the office by phone or by traditional mail.If you have any questions,please contact 850.487.1395. *Pursuan
Florida Statutes,effective October 1,2012,licensees licensed under Chapter 455,F.S.must provide the Department with an email address if the
provided may be used for official communication with the licensee. However email addresses are public record.If you do not wish to supply a p,
provide the Department with an email address which can be made available to the public.To determine if you are a licensee under Chapter 455,
Product Approval Accepts:
check
Credit Card
Safe
https:/A,vww.floridabuilding.org/pr/pr-app_dtl.aspx?param=wGEVXQwtDqtgHSolOoKvoe[JYzjWepAO4NrdH6rFQIWli3%2f7aZ73pg%3d%3d 3/3
MIAMI-IaADE MIAMI-DADE COUNTY
PRODUCT CONTROL SECTION
11805 SW 26 Street,Room 208
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES(RER) Miami,Florida 33175-2474
BOARD AND CODE ADMINISTRATION DIVISION T(786)315-2590 F(786)315-2599
NOTICE OF ACCEPTANCE (NOA) www.miamidadesov/economy
CertainTeed LLC
20 Moores Road
Malvern,PA 19355
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami-Dade County RER-Product Control Section to be
used in Miami Dade-County and other areas where allowed by the Authority Having Jurisdiction(AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product Control Section
(in Miami-Dade County)and/or the AHJ(in areas other than Miami-Dade County)reserve the right to have this product
or material tested for quality assurance purposes. If this product or material fails to perform in the accepted manner, the
manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or suspend the use
of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance, if it is
determined by Miami-Dade County Product Control Section that this product or material fails to meet the requirements
of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: CertainTeed Ridge Vent- 12" Unfiltered
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami-Dade County Product Control Approved",unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials,use, and/or manufacture of the product or process.Misuse of this NOA as an endorsement of any product,for
sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of
this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA revises NOA 19-0621.01 and consists of pages 1 through 4.
The submitted documentation was reviewed by Freddy Semino
NOA No.: 20-0723.40
MIAMI•DADE COUNTY Expiration Date: 09/23/24
"'• ' Approval Date: 10/15/20
Page 1 of 4
ROOFING COMPONENT APPROVAL
Category: Roofing
Sub-Category: Ventilation
Material: Plastic
Minimum Slope: 3:12
TRADE NAMES OF PRODUCTS MANUFACTURED OR LABELED BY APPLICANT
Product Test Product
Dimensions Specifications Description
CertainTeed Ridge Length: 48" TAS 100(A) Polypropylene plastic low profile ridge vent with an
Vent- 12" Unfiltered Width: 13.8" integral end plug for installation in asphaltic shingle
Height: 7/8" roof systems.
MANUFACTURING LOCATION
1. Orrick, MO
EVIDENCE SUBMITTED
Test Aeency Test Identifier Test Name/Report Date
Architectural Testing 65457.01-109-18 TAS 100 07/26/06
D8316.01-841-18 TAS 100(A) 09/16/14
D8316.02-801-18 TAS 100 (A)Calibration 12/02/14
Hurricane Engineering&Testing, HETI-09-F400 ASTM D 1929 07/01/09
Inc. HETI-09-T102 ASTM D 638 01/30/09
HETI-02-A001 ASTM G 155 09/13/02
PRI Construction Materials AVIG-010-02-01 ASTM D 635 12/02/14
Technologies ASTM D 1929 12/02/14
ASTM D 2843 12/02/14
AVIG-010-02-02 ASTM G 155 06/09/15
NOA No.: 20-0723.40
M�4Mi•ua�e couNnr Expiration Date: 09/23/24
Approval Date: 10/15/20
Page 2 of 4
APPROVED APPLICATION
Trade name: CertainTeed Ridge Vent- 12" Unfiltered
System Type A: Mechanical attachment of ridge vent over composite shingles.
Cutout: Cut a 1 I/2" slot along the apex of the roof by cutting 3/4" on each side of the ridge. The
slot shall terminate approximately 6" from each rake edge.
Installation: Center the vent over the slot. Install ridge vent using corrosion resistant roofing nails of
0.120" shaft diameter x 0.320"head diameter x 3" long and of sufficient length to
penetrate through the wood sheathing a minimum 3/16". Place the nails in each preformed
nail boss,two at each end, 15" from each end, and the center of each vent section.
Install pre-manufactured or field cut ridge shingles over the ridge vent in compliance
with the shingle manufacturer's current approved Notice of Acceptance, and the shingle
and ridge vent's installation instructions.Nails shall be of sufficient length to penetrate
through the sheathing a minimum 3/16".
Ventilation Calculations: Refer to manufacturer's published literature
Minimum Slope: 3:12
LIMITATIONS:
1. Refer to applicable building codes for required ventilation.
2. CertainTeed LLC Ridge Vent shall not be installed on roof mean heights greater than 33 feet.
3. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and
Rule 61 G20-3 of the Florida Administrative Code.
4. All plastic ridge vent manufacturers shall have an unannounced follow-up quality control program from an
approved listing agency. Follow-up test results shall be made available to the Miami-Dade Product Control
Office upon request.
5. All approved products listed herein shall be labeled and shall bear the imprint or identifiable marking of the
manufacturer's name or logo, city and state of manufacturing facility,and following statement: "Miami-Dade
County Product Control Approved" or the Miami-Dade County Product Control Seal as shown below.
CMIAMI�DADE COUNTY
NOA No.: 20-0723.40
MIAMI•DADE COUNTY Expiration Date: -0723.40
,...• p
/24
Approval Date: 10/15/20
Page 3 of 4
DETAIL DRAWINGS
CERTAINTEED RIDGE VENT- 12" UNFILTERED
11.0
R4.9
40°
2.5—■-j
4.6
6.4
13.8
48.0
i
END OF THIS ACCEPTANCE
NOA No.: 20-0723.40
MIAMI•DADE COUNTW Expiration Date: 09/23/24
Approval Date: 10/15/20
Page 4 of 4