HomeMy WebLinkAboutPOLYGLASS TU MAX ver2020Business r
LProfessional Regulation
eCls Home Log In - User Registration : HotTopir$ Submit Surcharge Stats & Facts
r
Product Approval
USER: Public User
Pr ,, pUi LYg m nu � EMMSt or ARRkqLun§g&rch a Bgpfica> Application Detail
FL #
FL5259-R32
Application Type
Revision
Code Version
2020
Application Status
Approved
Comments
Archived
Puhllcatlons� contact us 3CIS Site Ma LinksSE
arch
Product Manufacturer POLYGLASS USA
Address/Phone/Emall 1111 W. Newport Center Drive
Deerfield Beach, FL 33442
(954)233-1330 Ext242
malpert@polyglass.com
Authorized Signature Maury Alpert
malpert@polyglass.com
Technical Representative TECH REP
Address/Phone/Emaii 1111 West Newport Center Drive
Deerfield Beach, FL 33442
(866)802-8017
uspolygIasstechnIca I@polyg Iass.com
Quality Assurance Representative QA REP
Address/Phone/Email 1111 West Newport Center Drive
Deerfield Beach, FL 33442
(888)410-1375
uspol yg lasstech n i ca I @ po I yg I a ss. co m
Category Roofing
Subcategory Underlayments
Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed Florida
Professional Engineer
Evaluation Report - Hardcopy Received
Florida Engineer or Architect Name who developed the Robert Nieminen
Evaluation Report
Florida License PE-59166
Quality Assurance Entity UL LLC
Quality Assurance Contract Expiration Date 12/23,r2023
Validated By John W. Knezevich, PE
Validation Checklist - Hardcopy Received
Certificate of Independence FL5259 R32.DI 202001COI N,IEMINEN pR32.DI 2020 01COI N,IEMINEN pdf
Referenced Standard and Year (of Standard) Standard Year
ASTM D1970 2015
ASTM D226 2009
ASTM D4798 2011
ASTM D6163 2015
ASTM D6164 2011
ASTM D6222 2011
ASTM ❑6509 2015
FM 4424
2011
FRSA/TRI, Sixth Edition
2018
TAS 103
2020
UL 1892
2015
Equivalenre of product Standards
Certified By
Sections from the Code
Product Approval Method Method 1 Option D
Date Submitted
12/21/2020
Data Validated
12/21/2020
Data Pending FBC Approval
12/26/2020
Date Approved
02/09/2021
Summary of products
—,
FL #
, Number or Name
Description
5259.1
?Il:y,,Iss Roof UntleHymnts
)
Polyglass rpef underlayments for use in MC HVHZ jurisdictions.
Limits of Use
Approves for use in HVHZ: Yes
Approved for use outside HVHZ: No
Impact Resistant: N/A
Design Pressure: N/A
Other: Refer to ER Section 5 for Limns of Use.
installation Instructions
FL5259 R31 0 I0 0 1 F1N R ND
R32 Mil). tlf
Verified By: Robert Nleminen PE-59166
Created by Independent Third Party: Yes
Evaluation Reports
F s2 9 R32 AE 20 0 2 1 FINAL R P YG hDF0. AY6' N FL
Rig
pd
Created by tee by Independent Third Party: Yes
5259.2
Polyglass Roof Undedayments
(non-HVHZ)
PulygWss roof undedayments, for use in FBC non-HVHZ jurtedlRlons.
limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +N/A/-622.5
Other: 1.) The design pressure in this application
relates to one particular undedayment system for
use in the roof systems. Refer to ER Section 5.8.3
for other systems and associated maximum design
Pressures. 2.) Refer to ER Section 5 for other limits
Installation Instructions
FL5259 20 1 1 FIN/ R P V E A
R32R32 (N Pit
Verfled By: Robert Nieminen PE-59166
Created by Independent ThRd Party: Yes
Evaluation Reports
F 5 20 0 21 FlnIII. ER PLYPLYG UNDFRLAYMFNTS2
B2L(NON-HVHZI odf
Created by Independent Third Party: Yes
of use.
00
Cannot Us:: 2601 elar5 "Ross AaM1a�f 1239a 1hr-9W-.7-1824
The stare of Flanda Is an WEED employee Caaj [300Ja 4aRMFor da:', fdvan SUdmen[:: A!•++hlH 5Gtrnt:: pound$,,nr
Hodea kw, emall ada:esn are pubu<remNa, If You do nor warn your —all address releaud In resoonee on a nuhIr-r—M, mnn.e m nn.....n-i.
avaname M rat puml<. 1o.-In. llyou
ProduR Asp ssal lluwpb:
®®®PER®
Credit Card
Safe
NeMoetc.
Certljimte of AuModration X32A£5
353 Christian Street, Unit #13
Oxford, CT 06478
(203)262-9245
ENGINEER
EVALUATE TEST CONSULT
Polyglass USA, Inc. Evaluation Report P12060.02.09-R28
1111 West Newport Center Drive FL5259-R32 (NON-HVHZ)
Deerfield Beach, FL 33442 Date of Issuance: 02/24/2009
(954) 233-1330 Revision 28: 12/21/2020
SCOPE:
This Evaluation Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida. The documentation submitted has been reviewed by Robert Nieminen, P.E. for
use of the product under the Florida Building Code and Florida Building Code, Residential Volume. The products described
herein have been evaluated for compliance with the 7" Edition (2020) Florida Building Code sections noted herein.
DESCRIPTION: Polyglass Roof Underlayments, for use in FBC non-HVHZ jurisdictions
LABELING: Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted herein and
FBC 1507.1.1.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s) changes, the referenced Quality
Assurance or production facility location(s) changes, or Code provisions that relate to the product(s) change. Acceptance of our
Evaluation Reports by the named client constitutes agreement to notify NEMO ETC, LLC of any changes to the product(s), the
Quality Assurance or the production facility location(s). NEMO ETC, LLC requires a complete review of its Evaluation Report relative
to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Florida Product Approval Number (FL#) preceded by the words "NEMO I etc. Evaluated" may be displayed in
advertising literature. If any portion of the Evaluation Report is displayed, then it shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or its
distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists of pages 1 through 17.
Prepared by:
er;
v
Robert l.M. Martinet, P.E.
: iy
Florida Registration No. 59166 Florida DCA ANE1983
Thefaa'imileseal appeatlngwaiautM1Mzed by PohM Nieminen, P.E. on
12/21/2@o rnia do
not serve as an ekcnonialN signed document.
CERTIFIGTION Of INDEPENDENCE:
1. NEMO ETC, LLC does not have, nor does it Intend to acquire or will it acquire, a financial interest in any company manufacturing or distributing
Products it evaluates.
2. NEMO ETC, LLC is notowned, operated or controlled by any company manufacturing or disMbuting products it evaluates.
3. Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any company manufacturing or distributing products for which the
evaluation reports are being issued.
4. Robert Nieminen,P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the product.
S. This Is a building code evaluation. Neither NEMO ETC, LLC nor Robert Nieminen, P.E. are, in any way, the Designer of Record for any project on
Which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless retained specifically for that
purpose.
02019 NEMO ETC, LLC
ONEMOletc.
Product Category: Roofing
Sub -Category: Underlayment
Compliance Statement: Roof Underlayments, as produced by Polyglass USA, Inc., have demonstrated compliance with the
following sections of the r Edition (2020( Florida Building Cade through testing in accordance with the following Standards.
Compliance is subject to the Installation Requirements and Limitations / Conditions of Use set forth herein.
9±tt�
Proots
Standard
Year
1504.3.1
Wind resistance
FM 4474
2011
1504.3.1
Wind resistance
UL1897
2015
1507.1.1
/ R905.1.1
Material standard
ASTM
D22fi
200909
1507.1.1,
1507.2.4,1507.2.9.2/
Material Standard
ASTM
D1970
2035
R905.1.1,
R905.2.8.2
1507.3.3/
R905.3.3
Material standard
FRSA/TRI,
SIMh Edition
2018
1507.11.2/
R905.11.2
Material standard
A5TM
D6163
2015
1507.11.2/
R905.11.2
Material standard
ASTM
D6164
2011
1507.11.2/
R905.11.2
Material standard
ASTM
D6222
2011
1507.11.2/R905.11.2
Material standard
ASTM D6509
2015
TAS 110
Accelerated Weathering
ASTM D4798
2011
Entlly
Enreimtion
Rafiereaug Arta
Eampr
Cumulation
Refmpnca
)IM
ERD DST Was)
wild Uplift
11]57.0101-1-R1 4/25/2001
EROD5TSDUI)
ASTM D1623, TA5103
PLYG-SCIM30.05.16-2
6/27/2016
ERD M 6049)
Wind UplR
11757.08011 8/13/2e01
ERD MT 6049)
Fes"i
PLYG-SC101300616-3
6/2712.
ERD DST Mail
Wind Uplift
Iin6.08.02 1/16 as
ERO(Isr aws)
A MO]970, 04798
PLYG-5[Bp80A7.16
7/16/M16
ERO(TST E049)
Wind Uplift
'174101.07 1/4/ZM7
ER0(T5T GM)
UU897
PLYGSCM2S.1616
30/12/wIft
ERD M 6049)
MW Uplift
P1738.02.07-R2 2/5/2007
ERD (TST Was)
FRSA7rglthe Oppose))
PLYG-SC1iW0.]1.16
12j27/2016
ERD DST 6D19)
WIM Uplift
F9260.D3.p8 3/23/2WB
END IT5T 5049)
FRSP/IRI Use slippage)
plYG5C12115.01.17
8/8/2017
ERD RST M49)
wind Uplift
P30510.1].CAg1 11/23/2009
ERDRSTE049)
FADAnRi
PLYG-SC130D.08.17
10/31/2017
oDDST6M9)
AsrM D1623, TA5103
P13030.1109-1 11/30/200a
PM PST 1067)
Wind Uplift
FM 3004093
]/1MODO
ERDDST6049)
TA5117FUJA5114IQ
%ID30.11.09-2 ]3/30/2009
NEMO(TST6049)
ASFM D1970
LPLVG38-0W.03.1a
3/29/2018
ERD(T5TEM9)
ASTM 0497]
PnO30.13A9-3 11/30/2009
NEMO(ST 6W9)
ASTM D1623, TAS IM
4SIm-18
EROIT5T6M91
p5rM 019]0
p3336np6,10 fi/RQO10
HEMO(ffi 6049)
wMUpIHt
8F,XD U18-g1
9l-PLYG-18N3.p1.19
1/11/2019
1/3]/2019
ERD (TST 6049)
FRSA/To
P333I0.03.11 3/2/2011
Undo DST MUVU
A3rM M163
45VLY&IFDO2.01.]AA
1/24/2019
ERD n5T 6099)
A5TM D1623, TAS He
P3 D....11 4/UAM1
NEMO DST E0,9)
AST, D6722
4SPLYG38-002.05.Is{
5/20/2019
ERD FM 6049)
ASTM D1970, M798
P37300.20.11 10/19/aMI
NEMO DST 6049)
fgsp/IRI
4SPLYG-18-0%.]0.19,G
10/8/2019
ERDDST6049)
rp5q?RI
P40390.08.12-1 a/6/2012
NFMO DST Em9)
FloArMl
4SPLYG-18{M.]0.19-I
10/8/2019
ERD (M 6049)
p5TM DIM, TA51¢3
P4035V.08.12-2 8/]/2p12
NEMO ii1Tfi049)
FRiA/TRI
qs-PLTG-1BtOf.10.19t
10/9/2019
ERD DST 6049)
iSTM DIM, TAS 303
C41420.0%12-3 9/11/2012
NEMO(TS76049)
FR5A/TFI
4SPLYG-18004.12.19-F
12/I0/2019
ERD(TST6049)
ASTM Deae
p37590.03.131-RI 2/5/2013
NEW)(M 6NU
Re Anal
4i PLYG-1955UD402A
1j2/2020
ERDITSr60*91
TMI14U)
P39MIG3.13 3/4/2013
NEMO(T5r W49)
ASTM M222
0.4PLYG16002.12.141(A1
1171=0
ERO RSF 604s
ASTM D6164
P31590.03.13-m 31QZM3
NEMOR5T6049)
g D1910, M798
4SPLY6]eOa4.01.20M
1/14/2020
mD R5T 6.)
ASTM DaD64
.7s90.0.13-1 7/2/2013
NEMO DST E049)
ASTM DI970, 04798
4SPLYG-I..0110.1(
1/14/2020
ERD RST Goda)
Wind UpIM
P41632.08.13 a/WM
NEMO ren 6049)
FRSVMI Rilenlppage)
4SPLYG-I8604.01S1.A
1/16/N20
ERORST6O49)
ASTM NMI
P45940.09.13 91412DU
NEMO rW 60HU
ASTM D6IW
4SPLYG-18004.02.no
1/15/202D
ERDRSTa49)
ASTA Not
1,45940.09.13 9/4/2013
NEMO MT Me)
FRSA(TRI
PLYG-SC15855.05.20A
5/29/2020
ERDRSTW49)
ASTM DD70(adM1Won)
P453I009.13 9/18/2013
NEMORSTONS)
FRSg4gl
4FPLYG-2 SSUDL01
7/6/2020
ERDRST6049)
Wind Uplift
P11756A5.03'1`1 11/M/1013
NEMO(TST6049)
ASTM 06222
4TPLYG-1455MBBLSA
7/n/2020
ERD COST W49)
Wind Uplift
P11781.11.03}Rl 11/26AOU
NEMO(M 04s)
ASTM 0479%D1623
4}PLYG]9SSUOL-05A
9/1D/2020
ERDR5T6049)
ASTM01623,TAS1m
P452M..05.14 5/]2/2014
NEMO(TST6D49)
ASTM DI9]0
41-PLY620-55UOL-05A
9/30/2020
ENDMen
ASTM 01623, De 103
.20.09.14-5 9/8/2014
NEMORSTE049)
FR l
/[PLYG-2D-MUOL-0S.0
9 0 WO
/3 A
ERD M 6M9)
ASTM D1623, TAS 103
(KNOW146 9/R/LIM
NEMO RST W49)
41-PL 119.
ERD(MGM)
ASTM DI623
P4652I1.1014 10/3/2p14
NEMO RSTE099)
Area 1
ASTM D]970, OIT9R
IftON.1
4SPLYGIaCM.]219.0
10/27/2020
10/27/203D
ERD (ST a049)
FRSAtnu
PM360.10.14Al 10/7/2014
NEMORST6049)
FRUll
•- I PLYG-I9-SSUDLUl.q
31/1B/2020
NEMO ETC, LLC.
EodiNtiOn Report P12060.01.09-R210
a mpmrega.haneoonx3245s
7- EDRION (2020) FBC NON -HIKE EVALUATION
F1.5259-1132(NON-HVH2)
Polyglass Roof Undedayments
RdpEipn2a:12/21/2020
Plate 2 of 17
na
Examitual.Rote..
0
pah
EMIN
Examination
ERa (T46M9)
A W970, D4798
P43290.30.14
10/17/2014
NEMO mn 60C91
AAM D1629, TAS In
ERD(1Sr60491
FRSAITRI
PLYG-SC7550.03.15
3/24/200
Polyglass USA
P/LAryldaUt
ERD(1ST 4X49)
Mtrd 01623
p4D390.04.35
4/3/2015
PotyBhat USA
Materials Affidavit
END a5T 600.91
Wind Uplift
PLYG-SCIUM.M.16-1
SAMD16
UL (QUA9625)
Cupity Cptrol
ERO ITST 6D191
ASrIA D1970, N798
PLYG3 0131)l
6/27/2316
UL(QUA91i25)
Quality Control
UL(QUA9625)
Quality Control
4. PRODUCT
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
4.10
4.11
4.12
4.13
4.14
4.15
ONEMOjetc.
efNe Mi r
Date
4P-ICP20.41A LA
12/012OW
Mule-Xlde Cron Lg
03/01/1008
Polystiuk Campaund
oVUV2013
Service Wnfimradon(FLI
WA3/W.
Service Confitmatim M)
11/07/2p19
Honda ears
Cure.
DESCRIPTION:
Product
Material Standard
Plam(s)
Description
Elastobase
ASTM D6163
FL
Fiberglass -reinforced, SBS modified bitumen base sheet
Elastobase P
ASTM D6164
FL
Polyester -reinforced, SBS modified bitumen base sheet
Elastoflex 56 G
ASTM D6164
FL, PA
Polyester -reinforced, SBS modified bitumen rap sheet
FRSA/TRI 0948
Elastoflex 56G FR
ASTM D6164
FL
Polyester -reinforced, SBS modified bitumen cap sheet
FRSA/TR109-18
HydraGuard Dual Pro
ASTM D1970
FL
Nominal 60-mil thick dual -layer rubberized asphalt
waterproofing membrane, fiberglass reinforced, with a
polyester fabric surface
HydraGuard Tile Pro
ASTM D3970
FL
Nominal 60-mil thick dual -layer rubberized asphalt
FRSAITRI09-18
waterproofing membrane, fiberglass reinforced, with
polyester fabric surface
Mule -Hide SA-APP Cap Sheet
ASTM D6222
FL
Polyester -reinforced, APP modified bitumen cap sheet
FRSA/TRI09-18
Mule -Hide SA-APP Cap Sheet
ASTM D6222
FL
Polyester -reinforced, APP modified bitumen cap sheet
(FR)
FRSA(TRI 09-18
PolyFlex G
ASTM D6222
FL
Polyester -reinforced, APP modified bitumen cap sheet for
FRSA/TRI 09-18
use as an alternate to Heat Applied "Cap Sheet" in the
'Two Ply System" from FRSA/TRI Florida High Wind
Concrete and day Roof Tile Installation Manual, Sixth
Edition beneath mechanically fastened or adhered tile
roof systems
PolyfIex G FR
ASTM D6222
FL
Polyester -reinforced, APP modified bitumen cap sheet for
FRSAITRI09-18
use as an alternate to Heat Applied 'Cap Sheet' in the
'TWO Ply System" from FRSA/TRI Florida High Wind
Concrete and Clay Roof Tile Installation Manual, Sixth
Edition beneath mechanically fastened the roof systems
PolyFlex SA P
ASTM D6222
FL, TX
Polyester -reinforced, APP modified bitumen cap sheet
FRSA/TRI09-18
Polyflex SA P FR
ASTM D6222
FL,TX
Polyester -reinforced, APP modified bitumen cap sheet
FRSA/TRI 09-18
Polyglass Base
ASTM D6509
FL
Fiberglass -reinforced, APP modified bitumen base sheet
Polyglass G2 Base Sheet
ASTM D4601
AL
Fiberglass -reinforced, asphaltic base sheet
Polystick lR-Xe
ASTM D1970
FL, PA, TX
Nominal 60-mil thick rubberized asphalt waterproofing
membrane, glass fiber reinforced, with an aggregate
surface
NEMO ETC, LLC. Evaluation Report PIZ060.02.09-RZa
od1*doRotAunurhafkn#32455 7'EDITION 12020)Pat NON-HVHZ EVALUATION FL5259-1132(NON-HVHZ)
Polyglass Roof Undeda drentr Revision 28: 12/21/2020
Page 3 0 17
4.16
4.17
f 4.18
4.19
4.20
4.21
5.1
5.2
5.3
5.4
5.5
OWMni,tic
RODUCT DESCRIPTION:
Product
Material Standard
Plants)
Descriptbn
Polystick MTS Plus
ASTM D1970
FL, NV,
Nominal 60-mil thick rubberized asphalt waterproofing
FRSA/TRI 09-18
PA, TX
membrane, glass fiber reinforced, surfaced with
polyolefinic film surface
Poystick Ivi
ASTM D19701
FL, NV, PA
Nominal 54-mll thick dual -layer rubberized asphalt
waterproofing membrane, fiberglass reinforced, with a
polypropylene film surface
Polystick TU Max
ASTM D1970
FL, PA, TX
Nominal 60-mil thick rubberized asphalt waterproofing
FRSA/TRI 09-18
membrane with a 190 g/m2 polyester fabric surface
Polystick TU P
FRSA/TRI 09-18
FL, PA, T%
Nominal 130-mil thick rubberized asphalt waterproofing
membrane, glass-fiber/polyester reinforced, with a
granularsurface
Polystick TU Plus
ASTM D1970
FL, PA, TX
Nominal 80-mil thick rubberized asphalt waterproofing
FRSA/TRI 09-18
membrane, glass fiber reinforced, with a polyester fabric
surface
Polystick%FR
ASTM D3970
Nominal 80-mil thick rubberized asphalt waterproofing
FRSA/TRI 09-18
membrane, glass fiber reinforced, surfaced with
teMured film surface
This is a Building Code Evaluation. Neither NEMO ETC, LLC nor Robert Nleminen, P.E. are, in anyway, the Designer of Record for
any project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless
retained specifical ly for that purpose.
This Evaluation Report is not for use in FBC High Velocity Hurricane Zone jurisdictions (i.e., Broward and Miami -Dade Counties).
This Evaluation Report pertains to above -deck roof components. Roof decks and structural members shall be in accordance with
FBC requirements to the satisfaction of the Authority Having Jurisdiction.
This Evaluation Report does not include evaluation of fire classification. Refer to FBC 1505 for requirements and limitations
regarding roof assembly fire classification. Refer to FBC Z603 for requirements and limitations concerning the use of foam plastic
insulation.
Polyglass Roof Underlayments may be used with any prepared roof cover where the product is specifically referenced within
FBC approval documents. If not listed, a request may be made to the Authority Having Jurisdiction for approval based on this
evaluation combined with supporting data for the prepared roof covering.
1 PolystkAMU-X hosbeenfoundthmugh romporative tes[inp to have a lesser roeJjcien[ ffdnion than ASTM 0226 ro jln9felt in a tlrycondltlon, tested at Nondartl
laboratory rondidow. Agreement between purchaserandsellee assetfvth In Section 4.3, Note I ofASTM 0197 15, shoodbe establishedos to slip resistan[e.
NEW ETC, I.I.C. Evaluation Report P12060.02.09-R28
RMhrotafAutlwdmtiona1zfsS 7' EDITION (1020) FBC NOWIP/W EVALUATION FL5259-R32(NON-HVH2)
PoiW ass Roof Underlaymenn Revision 28:12/21/2020
Page 4 of 17
5.6 Allowable Roof Covers: ONEMOletc.
TAB16 I: ROOF COVER OPTIONS
FBCSeNon:
Sia).:
1501.3
MZAa da W..s
150).]
1"1 fladMx9
Undedayment
Asphalt
Shingks
Clay and Concrete The
Metal
Slatearsfate-
Type Shingles
Wood
Mechanical Attach
Adhesive -Set
Elastobase
Elastobase P
Polyglass Base
Yes
(Anemate to
0336, Type lU
Yes
IAlternatero
D316, TyM 11)
No
Yes
(a, Base Sheet,
See S.&31
Yes
Iu Ban Shen,
sea 583)
Yes
(as Base Shen,
See a.")
Yes
(.U.Sheet,
see SA3)
Yes
(as Base Sheet,
sro5.&3)
Yes
(as Base Sheet,
sae 5.a.3)
Yes
IAltemateto
Dn6, Type 11)
Yes
(Akema&to
D226,Ty0ell)
No
Yes
(Aftur.W
0336, Type lU
Yes
(Alaermhm
Ms. Tyye lU
No
Yes
(AI[ematem
0336, Type lU
Yes
fghemahro
D336,TyMIU
No
Poyglass G2 Base
No
Yes
(asBasasheet,
saa 59.3)
Yes
(ueasasheey
Sees.e3)
No
No
No
Elastoflex S6G
No
Yes
Yes
(Seesa,l)
No
No
No
ElartoHex S6 G FR
No
Yes
No
No
No
No
HydraGuard Dual Pro
Yes
No
No
Yes
Yes
Yes
U0iMrttlpy150711.3
/R905.1.1.3)
HydraGuard Tile Pro
yes
Yes
Yes
lUes.6.1)
Yes
Yes
Yes
Uoln nrip, 1507.1.0
/0.905.1.1,31
Mule -Hide SA-APP Cap Sheet
No
Yes
Yes
(Sae5.6.1)
No
No
No
Mule -Hide SA-APP Cap Sheet(FR)
No
Yes
Yes
pee 5.6.1)
No
No
No
PDIynaxG
No
Yes
Yes
(see 5G11
No
No
No
POW" G FR
No
Yes
No
No
No
No
Polyflex SAP
No
Yes
Yes
(see 5 6.1)
No
No
No
Polynex SA P FIR
No
Yes
yP5
(See5.6.1)
No
No
No
Polystick lR-Xe
Yes
No
No
No
Yes
Yes
Ubetmps,150.1.13
/Ra05.1.L3)
Polystick MTS Plus
Yes
Yes
NO
Yes
Yes
Yes
Udnt stripy 1507.1.13
/R905.1.1.3)
Polystick MU-X
Ys
Yes
No
No
Yes
Yes
Yes
(IomtnrPy lsm.vl3
/0905.1.1.3)
Potystick TU Max
No
Yes
Yes
(see 5.6.1)
yes
No
Yes
UoIn.fiI 0].I.L3
/RaIS.L1.3)
Polystick TUP
No
Yes
Yes
(Saa&6.3I
N0
N0
Yes
tlolntnrw.lsm.11.3
/R9%.1.1.3)
Polystick TU Plus
Yes
Yes
Yes
(Saes.6.1)
Yes
Yes
Yes
Wnt rt,m, ISD7.1.1.3
/RWSA.L3)
Polystick XFR
Yes
Yes
Na
Ves
Ves
Yes
oolnnnps, 150].1.1.3
/Rm5.11 1
Evaluation Report PI2060.02.MM
feMjkpnvfAvModzatfon g330.53 7n1 fDITION(2020) NBC NON-HVHZ WMAMN FL5259-R32(NON-HVHZ)
Pol"lassRoaf UrMerla aunts Revision Ze: 12121/20M
Page 5 & 17
S.6.1 Adhesive -set tile is limited to use of the following underlayment/tile-adhesive cnmhinatinr<
ONEMO]etc.
TABU: 2A: ALLOWABLE UNDERIAYMENT TBE-ApHESIVE COMBINATION62
Undedayment
Adhesive
Florida Product Approval
Polystick TU Max or Polystick TU Plus
DAP Foam "Touch'n Seal
StormBond Roof Tile Adhesive"
FU4506
HydraGuard Tile Pro, Polyflex SA P, Polystick TU Max, Polystick TU P or Polystick
Dupont file Bond`" Roof Tile
TU Plus
Adhesive"
FU2525
Elastoflex S6 G, HydraGuard Tie Pro, Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-
APP Cap Sheet (FRI, Polyflex G, Polyflex SA P, Polyflex SA P FR, Polystick TU Max,
ICP Adhesives and Sealants
Polystick TU P or Polystick TU Plus
"Polysete AH-160"
FL6332
Elastoflex S6 G, HydraGuard Tile Pro, Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-
APP tap Shea (FR), Polyflex G, Polyflex SA P, Polyflex SA P FR, Polystick TU Max,
ICP Adhesives and Sealants
POlystick TU P Or PoWick TU Plus
'Polyset• RTA-1"
FL6276
S.7 Allowable Substrates:
TABLE2:SUBR111ATE0PNONSFDRADHEREDUNDERLILYMENT9
Undedayment
Application
Substrates (designed to meet wind bads for Project)
TWO
Primer
Materials)
HydraGuard Dual Pro,
HydraGuard Tile Pro, Polystick IR-
Xe, Polystick MTS Plus, Polystick
MU-%, Polystick TU Max,
Polystick TU P, Polystick TU Plus,
Polystick %FR, Mule -Hide SA-APP
Cap Sheet, Mule -Hide SA-APP
self
adheringInsulation
Deck/
sheathing
(Optional)ASTM
D41
plywood, OSB, Southern yellow Pine or Huber m En eered
Woods -ZIP System"Panels g
ASTMD41
structural concrete
(Optional)ASTM
D41or WB-3000
ASTM C1289 Type It Class 1 of iso anurate, ASTM
p T n'
PrimeC1289 or BoarensDeck
Prime or SECUROCK Gypsum -Fiber Roof Board
Base Sheet
N/A
ASTM D226, Type II felt, Elastobase, Elastobase P or Mule-
Hide Nall Base
Cap Sheet (FR). Polyflex SA P or
Polyflex SA P FR
Deck
ASTM 041
structural concrete
Elastoflex S6 G or Elastoflex S6 G
FR
hot asphalt
Insulation
(Optional)ASTM
D41
OenSDeck Prime or SECUROCKG sum -Fiber Roof Board
Gypsum -Fiber
Base Sheet
N/A
ASTM D226, Type II kit, Elastobase, Elastobase P, Mule -
Hide Nail Base or Polyglass G2 Base
Deck
ASTM D41
structural concrete
Politics or PolyflaGFR
torch-
applied
Insulation
(Optional)ASTM
D41
DensDeck Prime or SENGypsum-Fiber ROCKG sum -Fiber Roof Board
Base Shea
N/A
Elastobase, Elastobase P, Mule -Hide Nail Base, Polyglass
G2 Base or Polyglass Base
' Referto Tile Manaf dumr'5 orAdhesive Manufactureh Florida ProductAparovol for Overturning Moment Resistance Performance.
NEMO ETC, LtG Evaluaion Report P1206o.02.WM
Corb'fimteo3Aurhwimpona32,t55 P EDITION (2020) PIC NON-HVHZ EVALUATION FL92S9.R32(N0N-HVHZ)
P0lyglaaa Roof Underlaymenta Pevlslon 28: 12/21/2020
Page 6 of 17
5.6 Attachment Limitations-NEMO I etc.
5.8.1 For use under mechanically attached NON -TILE prepared roof coverings, attachment shall be In accordance with the
manufacturer's installation instructions, but —for mechanically attached underlayments or base sheets - not less than FBC
1507.1.1 or R905.1.1.
5.8.2 For use under tile roof systems, attachment shall be in accordance with the manufacturer's installation instructions, but —
for mechanically attached base sheets - not less than:
• FRSA/TRI Florida High Wind Concrete and Clay RoofTfle Installation Manual, Sixth Edition, Appendix A, Table I (forTwo-
Ply Asphalt Applied Hot Mop Underlayment)
or
• Section 5.8.3 herein (for other underlayment systems).
5.8.3 Wind Resistance for Underlayment SystTile RoofApplications:
The following wind uplift limitations apply to underlayment systems that are not prescriptive in the FRSA/TRI Florida High
Wind Concrete and Clay Roof Tile Installation Manual, Sixth Edition. The Maximum Design Pressure is the result of testing
for wind load resistance based on allowable wind loads, and reflects the ultimate passing pressure divided by 2 (the 2 to 1
margin of safety per FBC 1504.9 has already been applied).
5.8.3.1 Direct -to -Deck:
The maximum design pressure for the selected assembly shall meet or exceed that required under FRSA/TRI Florida High
Wind Concrete and Clay Roof Tile Installation Manual, Sixth Edition, Appendix A, Table 1A or the critical (highest) design
pressure determined in accordance with FBC 2609 or FBC Residential Chapter 3.
#1 Maximum Design Pressure =-525 esf:
Deck: APA rated, 7/16 CAT, 0.418 in., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Joints: Min.&inch wide strips of Elastoflex SA-V over all DISH joints
Base Ply: Polystick MIS Plus, self -adhered.
Underlayment: Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P, Polyflex SA P FR, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered.
#2 Maximum Design Pressure =-90 osf:
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Primer: None
Base Ply: (Optional) Polystick MTS Plus, self -adhered.
Underlayment: Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P, Polyflex SA P FR, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered.
#3 Maximum Design Pressure =-97 5 h
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Primer: PGI00 or ASTM D41
Base Ply: (Optional) Polystick MTS Plus, self -adhered.
Underlayment: Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P, Polyflex SA P FR, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered and back -nailed within the selvedge -edge side laps using 12 ga. x ly." ring shank
nails through 32 ga., 1-5/8" diameter tin caps spaced 12-inch o.c.
94 Maximum Design Pressure=-105 asf•
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Primer: W6-3000
Base Ply: (Optional) Polystick MTS Plus, self -adhered.
Underlayment: Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P, PCIVflex SA P FR, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered and back -nailed within the selvedge -edge side laps using 12 ga. x Ik" ring shank
nails through 32 ga.,1-5/8" diameter tin caps spaced 12-inch o.c.
NEW UC, LLC. Evaluation Report P32060.02.09-1128
Cedif.te ofAamoviuon g32455 r- EDITION (2020) FEC NON-HVH2 EVALUATION FL5259-1132(NON-HVK)
Polygla o Roof Undedaymems Revision 28: 12/21/2020
Page 7 of 17
#S Maximum Design Press =-135 osf: ONEMO I etc.
Deck: Min. 15/32-Inch Plywood to meet project requirement W satisfaction of Authority Havinglurisiiction.
Primer: (Optional) PG100 or ASTM D41
Base Ply: (Optional) Polystick NITS Plus, self -adhered.
Joints: Min. 4-inch wide strips of Elastoflex SA-V over all plywood joints.
Underlayment: Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P, Polyfiex SA P IT, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered.
#6 Maximum Design Pressure =-315 osf:
Deck: Structural Concrete to meet project requirements to satisfaction of Authority Having Jurisdiction.
Primer: PG100 or ASTM D41
Base Ply: (Optional) Polystick MIS Plus, self -adhered.
Underlayment: HydraGuard Tile Pro, Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P, PDlyflex SA P FR,
Polystick TU Max, Polystick TU P or Polystick TU Plus, self -adhered.
#7 Maximum Design Press =-622 5 of:
Deck: Structural Concrete to meet project requirements to satisfacdon of Authority Having Jurisdiction.
Primer: PG100 or ASTM MI
Undedayment: Elastoflex S6 G, applied in full mopping of hot asphalt or Polyflex G, torch -applied.
#8 All other direct -deck, adhered underlayment systems beneath tile roof systems carrya Maximum Design Pressure of-4S PSI.
5.8.3.2 Mechanically -Attached Base Sheet:
The maximum design pressure for the selected assembly shall meet or exceed that required under FRSA/TRI Florida High
Wind Concrete and Clay Roof Tile Installation Manual, Sixth Edition, Appendix A, Table 1A or the critical (highest) design
pressure determined in accordance with FBC 1609 or FBC Residential Chapter 3.
Alternatively, the maximum design pressure for the selected assembly shall meet or exceed at least the Zone 1 design
pressure determined in accordance with FBC 1609 or FBC Residential Chapter 3. Elevated pressure zones shall employ an
attachment density designed by a qualified design professional to resist the elevated pressure criteria. Commonly used
methods are ANSI/SPRI WDl, FM Loss Prevention Data Sheet 1-29, Roofing Application Standard RAS 117 and Roofing
Application Standard RA5137. Assemblies marked with an asterisk" carry the limitations set forth in Section 2.2.10.1 of FM
Loss Prevention Data Sheet 1-29 (February 2020) for enhancements.
#9 Maximum Design Pressure - -300 osf":
Deck: Min.15/32-Inch OSB to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase or Mule -Hide Nall Base (poly -film top surface)
Fasteners: 11 ga. x 1.25-inch long x 1-inch head diameter round metal Cap nails
Spacing: &inch o.c. at the 3-inch wide side laps and 6-inch o.c. at two (2) equally spaced staggered center rows.
Base Ply: (Optional) Polystick RATS Plus, self -adhered.
Underlayment: Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P, PolyBex SA P FR, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered.
#10 Maximum Design Pressure =-375 osf•:
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction,
Base Sheet: Elastobase or Mule -Hide Nail Base (poly -film top surface)
Fasteners: 11 ga. x 1.25-inch long x 1-inch head diameter round metal cap nails
Spacing: 6-inch o.c. at the 3-inch wide side laps and 6-inch o.c. at two (2) equally spaced staggered center rows.
Base Ply: (Optional) Polystick MTS Plus, self -adhered.
Underlayment: Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P, Polyflex SA P FR, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered.
#11 Maximum Design Pressure =-375 sfe:
Deck: Min.19/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: One (1) or two (2) layers ASTM D226, Type II felt
Fasteners: 11 ga. x 1.25-inch long x 1-inch head diameter round metal cap nails
Spacing: 6-inch o.c. at the 3-inch wide side laps and 12-Inch o.c. at two (2) equally spaced staggered center rows.
Underlayment ElastoRex 56 G, applied in full mopping of hot asphalt.
NEMO ETC, MC. Evaluation Report P12060.02.09-R28
Certifxvte Of/WheivrnM P32a55 P"EDITION (2020)FBC NON-HVHZ EVALUATION F15259-R32(NON-HVK)
Polyglass Roof Underlayments Revision 28: 12/21/2020
Page a of 17
#12 Maximum Design Pressure=d5 Dsf•: QNEMO ] etc.
Deck: Min.19/32-Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction,
Base Sheet: One (I) layer ASTM D226, Type II felt
Fasteners: 11 ga. x1.25-inchx3/8-inch head diameter annular ring shank roofing nails at 1-5/8,inch diameter tin caps
Spacing: 4-inch o.c. at the 2-inch wide side laps and &inch o.c. at two (2) equally spaced staggered center news.
Base Ply: (Optional; for use with self -adhering underlayment only) Polystick NITS Plus, self -adhered.
Underlayment: Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P, Polyflex SA P FR, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered.
#13 Maximum Design Pressure =-45 sfe:
Deck: Min.19/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Two (2) layers ASTM D226, Type II felt
Fasteners: 11 ga. x 1.25-Inch long x 3/8-inch head diameter annular ring shank roofing nails at 1-5/8-inch diameter tin caps
Spacing: 9-Inch o.c. at the 2-inch wide side laps and 9-inch o.c at two (2) equally spaced staggered center rows.
Base Ply: (Optional; for use with self -adhering underlayment only) Polystick NITS Plus, self -adhered.
Underlayment: Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (Fit), Polyflex SA P, Pulyfiex SA P FR, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered or Elastoflex S6 G, applied in full mopping of hot asphalt.
#14 Maximum Design Pressure=-45 sf:
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase (sanded top surface for hot -asphalt or torch -applied cap or poly -film surface for torch -applied cap)
Fasteners: Simplex MAXX Cap Fasteners
Spacing: 9-inch o.c, at the 2-Inch wide side laps and 18-Inch o.c. at two (2) equally spaced staggered center rows.
Underlayment: Elastoflex S6 G, applied in full mopping of hot asphalt or Polyflex G, torch -applied.
#15 Maximum Design Pressure =-450usf:
Deck: APA rated, 7/16CAT, 0.418In, Exposure 1, OSB Sheathing to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Base Sheet: Elastobase or Mule -Hide Nail Base (poly -film top surface)
Fasteners: 12 Be. annular ring shank nails with 1-5/8" diameter tin caps
Spacing: 6-inch o.c. at the 3-inch wide side laps and 6-inch o.c. at four 14) equally spaced staggered center rows.
Base Ply: (Optional) Polystick NITS Plus, self -adhered.
Underlayment Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P, Polyflex SA P FR, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered.
#16 Maximum Design Pressure =-450 psf:
Deck: APA rated, 7/16 CAT, 0.418 in., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Base Sheet Elastobase (send top surface)
Fasteners: 12 ga. annular ring shank nails with 1-5/8" diameter tin caps
Spacing: 6-inch a.c. at the 3-inch wide side laps and 6-Inch o.c. at four (4) equally spaced staggered center rows.
Underlayment Elastoflex S6 G, applied in full mopping of hot asphalt.
#17 Maximum Design Pressure =-450 Psf:
Deck: APA rated,7/16 CAT,0.418 in., Exposure 1, OSB sheathing to meet project requirements to satisfaction ofAuthority Having
Jurisdiction.
Base Sheet. Elastobase or Polyglass Base
Fasteners: 12 ga. annular ring shank nails with 1-5/8" diameter tin caps
Spacing: 6-inch a.c. at the 3-Inch wide side laps and 6-Inch o.c. at four (4) equally Spaced staggered center rows.
Underlayment: Polyllex G, torch -applied.
#18 Maximum Design Pressure =-525 Dsf:
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase (sanded top surface for hot -asphalt or torch -applied cap or poly -film surface for torch -applied cap)
Fasteners: Simplex lvl XCap Fasteners
Spacing: 9-inch o.c. at the 2-inch wide side laps and 12-inch o.c. at two (2) equally spaced staggered center rows.
Underlayment: Elastoflex S6 G, applied In full mopping of hot asphalt or Polyflex G, torch -applied.
NEW ETC, LLC, Evaluation Report P12060.02.09-R28
cempme o7Audwtlrarlon#324s5 7m EDMON(2020)FgC NON-HVHZ EVALUATION FW59-R32(NON-HVHZ)
Polyglass Roof Underlaymeass Revision U: 12/21/20M
Page 9 of 17
#19 Maximum Design Press a =-52 5 # f: ONEMOletc.
Deck: MIn.15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet- Elastobase or Mule -Hide Nail Base (poly -film top surface)
Fasteners: Simplex Original Cap Nails
Spacing: 6-inch ad. at the 3-Inch wide side laps and 6-Inch O.C. at four (4) equally spaced staggered center rows.
Base Ply: (Optional) Polystick MTS Plus, self -adhered.
Underlayment: Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P, Polyflex SA P FR, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered.
#20 Maximum Design Pres =-52 5 issf:
Deck: MIn.15/32-Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase(sanded top surface for hot -asphalt or torch -applied cap or poly -film surface for torch -applied up)
Fasteners: Simplex Original Cap Nails
Spacing: 6-inch o.c. at the 3-inch wide site laps and 6-inch o.c. at four (4) equally spaced staggered center rows.
Underfaymentt Elastoflex S6 G, applied in full mopping of hot asphalt or Polyflex G, torch -applied.
#21 Maximum Design Pressure =-60 osf:
Deck: Min.19/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase(sanded top surface for hot -asphalt or torch -applied cap or poly -film surface for torch -applied cap)
Fasteners: 11 ga. x 1.25-inch long x 3/8-inch head diameter annular ring shank roofing nails at 1-5/8-inch diameter tin raps
Spacing: 8-inch o.c. at the 4-inch wide side laps and 8-inch o.c. at three (3) equally spaced staggered center rows.
Underlayment Elastoflex S6 G, applied In full mopping of hot asphalt or Polyflex G, torch -applied.
#22 Maximum Design Pressure =-60 Pat
Deck: Min.19/32-inch plywood to meet Project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastabase(sanded top surface for hot -asphalt or torch -applied cap or poly -film surface for torch -applied cap)
Fasteners: OMG #12 Standard Roofgdp with OMG Flat Bottom Metal Plates
Spacing: 12-Inch o.c. at the 4-Inch wide side laps and 12-Inch ox. at two (2) equally spaced staggered center rows.
Underlayment: Elastoflex S6 G, applied In full mopping of hot asphalt or Polyflex G, torch -applied.
#23 Maximum Design Pressure =-600 f:
Deck: APA rated,]/16 CAT,0.418 in., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Base Sheet: Elastobase or Mule -Hide Nail Base (poly -film top surface)
Fasteners: Simplex MAXX Cap Fasteners
Spacing: 8-Inch O.C. at the 3-inch wide side laps and 84nch o.c. at three (3) equally spaced staggered center rows.
Primer: P6100 or ASTM D41 primer applied to stress plates.
Base Ply: (Optional) Polystick MTS Plus, self -adhered.
Underlayment- Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P, Polyflex SA P FR, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered.
#24 Maximum Design Pressure =-600 Psf:
Deck: APA rated, 7/16 CAT, 0.418 in., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Base Sheet Elastobase (sand top surface)
Fasteners: Simplex MAXX Cap Fasteners
Spacing: 84nch o.c. at the 3-inch wide side laps and 8-Inch o.c. at three (3) equally spaced staggered center rows.
Underlayment: Elastoflex S6 G, applied in full mopping of hot asphalt.
#25 Maximum Design Pressure =-600 f:
Deck: APA rated,]/16 CAT,0.418 in., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Base Sheet: Elastobase or Polyglass Base
Fasteners: Simplex MAXX Cap Fasteners
Spacing: 8-Inch o.c, at the 3-inch wide side laps and 8-inch o.c. at three (3) equally spaced staggered center rows.
Underlayment Polyflex G, torch -applied.
NEMO ETC, LLC. Evaluation Report P32060.02.09-Mil
Cert re ejAUMoruorbn p3l<55 TTM EDITION (2020) FBC NON-HVHZ EVAWATION FL5259-R3Z(NON-HVHZ)
Polyglass Roof Dndedayments Revision 2B: 12/21/20ZO
Page 10 of 17
#26 Maximum Design Pressure . _67,5 Dsf: NNEMOjeft.
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Polyglass G2 Base or Polyglass Base (requires use oftorch-applied underlayment)
Fasteners: 12 ga. x 1.25-Inch long x 3/8-Inch head diameter annular ring shank roofing nails at 1-5/8-inch diameter tin caps
Spacing: 8-inch o.c. at the flinch wide side laps and 8-inch o.c. at four (4) equally spaced staggered center rows.
Underlayment: Elastoflex S6 G, applied in full mopping of hot asphalt or torch -applied or Polyflex G, torch -applied.
#27 Maximum Design Pressure - -67.5 Dsf:
Deck: APA rated, 19/32 CAT, 0.578 in., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority
Having Jurisdiction.
Base Sheet Elastobase or Mule -Hide Nail Base (Poly -film top surface)
Fasteners: TRUFAST Versa -Fast Fasteners & Plates with two (2) screws per plate installed 180' into the holes of the plate, parallel to
the width direction of the sheet.
Spacing: 12-inch o.c. at the 4-inch wide side laps and 12-inch o.c. at two (2) equally spaced staggered center rows.
Primer: (Optional) PG10D or ASTM D41 primer applied to stress places.
Base Ply: (Optional) Polystick MTS Plus, self -adhered.
Underlayment Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P, Polyflex SA P FR, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered.
#28 Maximum Design Pressure =-67 5 Dsf:
Deck APA rated, 19/32 CAT, 0.578 in., Exposure 1, 058 sheathing to meet project requirements to satisfaction of Authority
Having Jurisdiction.
Base Sheet: Elastobase (sand top surface)
Fasteners: TRUFAST Versa -Fast Fasteners &Plates with two (2) screws per plate installed 18W into the holes of the plate, parallel to
the width direction of the sheet.
Spacing: 12-inch o.c. at the 4-inch wide side laps and 12-Inch o.c. at two (2) equally spaced staggered center rows.
Underlayment Elastoflex S6 G, applied In full mopping of hot asphalt.
#29 Maximum Design Press =-675 f:
Deck: APA rated, 19/32 CAT, 0.578 in., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority
Having Jurisdiction.
Base Sheet: Elastobase or Polyglass Base
Fasteners: TRUFAST Versa -Fast Fasteners & Plates with two (2) screws per plate installed 180' into the holes of the plate, parallel to
the width direction of the sheet
Spacing: 12-inch ox. at the flinch wide side laps and 12-inch O.C. at two (2) equally spaced staggered center rows.
Undedayment Polyflex G, torch -applied.
#30 Maximum Design Pressure =-75 Dsf:
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction,
Base Sheet: Polyglass G2 Base or Polyglass Base(requires use of torch -applied underlayment)
Fasteners: Dekfast#14 with Dekfast Hex plates,OMG #14 HD with OMG 3"Galvalume Steel Plates, OMG Roofgrip#14 with OMG Flat
Bottom Plates(AccuTrac), Tmfast HD with Tmfast 3-inch Insulation Plates or Simplex lvl ( Cap Fasteners
Spacing: 10-Inch o.c. at the 44nch wide side laps and 10-inch o.c. at three (3) equally spaced staggered center rows.
Underlayment: Elastoflex 56 G, applied in full mopping of hot asphalt or torch -applied or Polyflex G, torch -applied.
#31 Maximum Design Press = AO Dsf:
Deck: Min.15/32-Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase (sanded top surface for hot -asphalt or torch -applied cap or poly -film surfam for torch -applied cap)
Fasteners: Simplex lvf xCap Fasteners
Spacing: 64rch o.c. at the 2-Inch wide side laps and 6-Inch o.c. at two (2) equally spaced staggered center rows.
Underlayment: Elastoflex 56 G, applied in full mopping of hot asphalt or Polyflex G, torch -applied.
4#32 Maximum Design Pressure =-90 psf:
Deck: Min.15/324nch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase (sanded top surface for hot -asphalt or torch -applied cap or poly-fllm surface for torch -applied cap)
Fasteners: OMG #12 Standard Roofgrip or OMG #14 Heavy Duty with OMG 3" Round Metal Plates or OMG Flat Bottom Metal Plates
Spacing: &inch o.c. at the 4-inch wide side laps and&Inch o.c. at three (3) equally spaced staggered center rows.
Underlayment Elastoflex S6 G, applied in full mopping of hot asphalt or Polyflex G, torch -applied.
NEMO ETC, LLC. Evaluation Report P32060.02.09-RU
GvrN1voefAud,w#aden 02455 7- EDITION (2020) FBE NON-HVHZ EVAUTATION FL5259-R32(NON-HVHZ)
Polyglass Roof Undedaymems Revision 28: 22/21/2020
Page 11 of 17
#33 Maximum Design Pressure =90 Dsf: ONEIMOjetc.
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase (sanded top surface)
Fasteners: Trufast#12 DP or Trufast#14 HD with Trufast 3" Metal Insulation Plates
Spacing: Finch o.c. at the 4-inch wide side laps and 6-Inch o.c. at three(3)equally spaced staggered center rows.
Underlayment Elastoflex S6 G, applied in full mopping of hot asphalt.
#34 Maximum Design Pressure =-90 pef:
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Polyglass G2 Base or Polyglass Base (requires use of torch -applied underl0yment)
Fasteners: DeWast#14 with Dekfast Hex plates, OMG #14 HD with OMG 3" Galvalume Steel Plates, CRAG ROofgnp#14 with OMG Flat
Bottom Plates (AccuTrac), Trufast HD with Trufast 3-inch Insulation Plates or Simplex MAXX Cap Fasteners
Spacing: 9-inch o.c. at the 4-inch wide side laps and 9-Inch o.c. at four (4) equally spaced staggered center rows.
Underlayment: Elastoflex 56 G, applied in full mopping of hot asphalt or torch -applied or Polyflex G, torch -applied.
#35 Maximum Design Pressure --900 Dsf:
Deck: APA rated, 7/16 CAT, 0.418 in., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Base Sheet: Elastobase or Mule -Hide Nail Base(poly-fllm top surface)
Fasteners: TRUFAST Versa -Fast Fasteners & Plates with two (2) screws per plate installed 180° into the holes of the plate, parallel to
the width -direction of the sheet
Spacing: 9-inch A., at the 2-inch wide side laps and 12-inch o.c. at two (2) equally spaced staggered center rows.
Primer: PG100 or ASTM D41 primer applied to stress plates.
Base Ply: (Optional) Polystick MTS Plus, self -adhered.
Underlayment: Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FIR), Polyflex SA P, Polyflex SA P FR, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered.
#36 Maximum Design Pre =-90 0 usf:
Deck: APA rztoo, 7/16CAT, 0.418In., Exposure 1, 056 sheathing to meet projett requirements to satisfaction of Authority Having
Jurisdiction.
Base Sheet: Elastobase (sand top surface)
Fasteners: TRUFAST Versa -Fast Fasteners & Plates with two (2) screws per plate installed 180' Into the holes of the plate, parallel to
the width -direction of the sheet
Spacing: 9-inch o.c. at the 2-inch wide side laps and 12-inch o.c. at two (2) equally spaced staggered center rows.
Underlayment Elastoflex S6 G, applied in full mopping of hot asphalt.
#37 Maximum Design Pressure =-900 sf:
Deck: APA rated,7/16 CAT,0.418 in., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority Having
Jurisdiction,
Base Sheet: Elastobase or Polyglass ease
Fasteners: TRUFAST Versa -Fast Fasteners & Plates with Two (2) screws per plate installed 18W into the holes of the plate, parallel to
the width -direction of the sheet
Spacing: 9-Inch O.C. at the 2-Inch wide side laps and 12-inch o.c. at two (2) equally spaced staggered center rows.
UnderlaymenC Polyflex G, torch -applied.
#38 Maximum Design Pressure =-975 Dsf:
Deck: Min.19/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase or Mule -Hide Nall Base (poly -film top surface)
Fasteners: 11 ga. x 1.25-inch x 3/8-Inch head diameter annular thin shank roofing nails at 1-5/&inch diameter tin caps
Spacing: flinch mc. at the 4-Inch wide side laps and 4-inch o.c. at four(4)equally spaced staggered center rows.
Base Ply: (Optional) Polystick MTS Plus, self -adhered.
Underlayment Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR(, Polyflex SA P, Polyflex SA P FIR, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered.
NEMO ETC, LLC, Evaluation Report P12060.01.09-R28
Cen1kote ofxuthooUxa n#32455 7TM EDITION(2020) FBC NON-HVHZ EVALUATION F1.5259-R32(NON-NVHI)
Polyglass Roof Underlayments Revision 29: 12/21/2020
Page 12 of 17
#39 Maximum Design Pressure=-975nE ONEMOjeft.
Deck: APA rated, 19/32 CAT, O.S78 in., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority
Having Jurisdiction.
Base Sheet: Elastobase or Mule -Hide Nail Base (poly -film top surface)
Fasteners: Simplex MAXX Cap Fasteners
Spacing: 6-Inch D.C. at the 44nch wide side laps and 6-inch o.c. at four (4) equally spaced staggered center rows.
Primer: PG100 or ASTM D41 primer applied to stress plates.
Base Ply: (Optional) Polystick MTS Plus, self -adhered.
Underlayment: Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyllex SA P, Polyflex SA P FR, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered.
940 Maximum Design Pressure =-975 Dsf:
Deck: APA rated, 19/32 CAT, 0.578 In., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority
Having Jurisdiction.
Base Sheet: Elastobase(sand top surface)
Fasteners: Simplex MAXX Cap Fasteners
Spacing: 6-Inch o.c. at the 4-Inch wide side laps and 6-inch o.c. at four (4) equally spaced staggered center rows.
Underlayment Elastoflex S6 G, applied in full mapping of hat asphalt.
#41 Maximum Design Pressure =-975 sf:
Deck: APA rated, 19/32 CAT, 0.578 in., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority
Having Judsdicion.
Base Sheet: Elastobase or Polyglass Base
Fasteners: Simplex MAXX Cap Fasteners
Spacing: 6-inch o.c. at the 4-inch wide side laps and 6-inch o.c. at four (4) equally spaced staggered center rows.
Underlayment: Polyflex G, torch -applied.
#42 Maximum Design Pressure=-105 sf:
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction,
Base Sheet: Elastobase (sanded top surface for hot -asphalt or torch -applied cap or poly -film surface for torch -applied cap)
Fasteners: Simplex MAXX Cap Fasteners
Spacing: 6-Inch o.c. at the 2-inch wide side laps and 6-Inch P.C. at hree (3) equally spaced staggered center rows.
Underlayment Elastoflex S6 G, applied in full mopping of hot asphalt or Polyflex G, torch -applied.
#43 Maximum Design Pressure =-1050can:
Deck: APA rated,7116 CAT,0.418 in., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Base Sheet Elastobase or Mule -Hide Nail Base (poly -film top surface)
Fasteners: TRUFAST Versa -Fast Fasteners & Plates with two (2) screws per plate installed 180° into the holes of the plate, parallel to
the width -direction of the sheet
Spacing: 6-inch D.C. at the 4-inch wide side laps and 6-inch o.c. at three (3) equally spaced staggered Center rows.
Primer: PG 100 or ASTM D41 primer applied to stress plates.
Base Ply: (Optional) Polystick MTS Plus, self -adhered.
Underlayment Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P, Polyflex SA P FR, Polystick TU Max, Polystick
TU P or Polystick TU Plus, self -adhered.
#44 Maximum Design Pressure=-1050psf:
Deck: APA rated, 7/16 CAT, 0.418 in., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Base Sheet: Elastobase (sand top surface)
Fasteners: TRUFAST Versa -Fast Fasteners & Plates with two (2) screws per plate installed 18W into the holes of the plate, parallel to
the width -direction of the sheet
Spacing: 6-inch o.c. at the 4-inch wide side laps and 6-inch O.C. at three (3) equally spaced staggered Center rows.
Underlayment: Elastoflex S6 G, applied in full mopping of hot asphalt.
NEMO ETC, I.I.C. Evaluation Report P32060.02.09428
Ce afe P)Av(honmtionx33455 7TM EDMON(2020)PBC NON-HVHZ EVALUATION R.SZ99-R321NON-HVH2)
PoWain Roof WGedayments ReNrien 28: 12/21/2020
Page 13 of 17
#45 Maximum Design Pressure = -105.0 p : ONEIVIO I etc.
Deck: APA rated,7/16 CAT, 0.418 In., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Base Sheet: Elastobase or Polyglass Base
Fasteners: TRUFAST Versa -Fast Fasteners & Plates with two (2) screws per plate Installed IN' into the holes of the plate, parallel to
the width -direction of the sheet
Spacing: 6-inch o.c. at the 4-Inch wide side laps and 6-inch o.c. at three (3) equally spaced staggered center rows.
Underlayment: Polyfiex G, torch -applied.
#46 Maximum Design Pressure =-1125 psf.,
Deck: Min.19/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase or Mule -Hide Nail Base(POIy-film top surface)
Fasteners: 11 Be. x 1.25-inch x3/&inch head diameter annular ring shank roofing nails at 1-5/8-Inch diameter tin caps
Spacing: 6-inch O.C. at the 4-inch wide side laps and 6-inch o.c. at four (4) equally spaced staggered center rows.
Primer: PG100 or ASTM D41 primer at all tin -caps
Base Ply: Polystick NITS Plus, self -adhered
Underlayment Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P, Polyflex SA P FR, Polystick TO Max, Polystick
TO P or Polystick TO Plus, self -adhered.
#47 Maximum Design Pressure=-120 tisf:
Deck: Min.15/32-Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase (Sanded top surface for hot -asphalt or torch -applied up or poly- film surface for torch -applied cap)
Fasteners: OMG #12 Standard Roofgrip or OMG #14 Heavy Duty with OMG 3" Round Metal Plates or OMG Flat Bottom Metal Plates
Spacing: &inch Oc. atthe 4-inch wide side laps and 6-Inch o.c. at five,(5) equally spaced staggered center rows.
Underlayment: Elastoflex S6 G, applied in full mopping of hot asphalt or Polyflex G, torch -applied.
#48 Maximum Design Pressure =-120 psf:
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase(sanded top surface)
Fasteners: Trufast#12 DP or Trufast#14 HD with Trufast 3" Metal Insulation Plates
Spacing: &inch Oc. at the 4-inch wide side laps and 6-inch o.c. at five(5) equally spaced staggered center rows.
Underlayment Elastoflex S6 G, applied in full mopping of hot asphalt.
#49 Maximum Design Pressure =-1275 f:
Deck: APA rated, 19/32 CAT, 0.578 in., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority
Having Jurisdicion.
Base Sheet: Elastobase or Mule -Hide Nall Base(poly-film top surface)
Fasteners: TRU PAST Versa -Fast Fasteners &Plates with one (1) screw per plate, in the center hole.
Spacing: &inch o.c. at the 4-inch wide side laps and 9-Inch o.c. at four(4)equally spaced staggered center rows.
Primer: PGIOO or ASTM D41 primer applied to stress Plates.
Base Ply: (Optional) Polystick NITS Plus, self -adhered.
Underlayment: Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P, Polyfiex SA P FR, Polystick TU Max, Polystick
TV P or Polystick TO Plus, self -adhered.
#50 Maximum Design Pressure =-1275 sf:
Deck: APA rated, 19/32 CAT, 0.578 In., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority
Having Jurisdiction.
Base Sheet: Elastobase (Send top surface)
Fasteners: TRUFAST Versa -Fast Fasteners & Plates with one (1) screw per plate, in the center hole.
Spacing: 94nch o.c. at the 4-inch wide side laps and 9-inch o.c. at four (4) equally spaced staggered center rows.
Underlayment Elastoflex 56 G, applied In full mapping of hot asphalt.
#51 Maximum Design Pressure =-1275 ISsf:
Deck: APA rated, 19/32 CAT, 0.578 In., Exposure 1, OSB sheathing to meet project requirements to satisfaction of Authority
Having Jurisdldion.
Base Sheet: Elastobase or Polyglass Base
Fasteners: TRUFAST Versa -Fast Fasteners & Plates with one (1) screw per plate, in the center hole.
Spacing: 9-Inch o.c. at the 4-inch wide side laps and 94ch Oc. at four (4) equally spaced staggered center rows.
Underlayment: Polyflex G, torch -applied.
NEMO ETC, U.C. Evaluation Report P32060.02.09-R28
c ylogre ufAurhw3gtmn W455 7' EDITION(20201 FBC NON-HVHZ EVALUATION FL5259-1132(NON-HVHZ)
Polyglass Roof Undedayments Revision 28; 12/21/202D
Page 14 of 17
5.9 Exposure Limitations- NNEMOletc.
TABIE 3: EXPOSURE LIMRATIONS
Underayment
Prepared Road Cover
Installation Type
Maximum
Exposure (days)
Elastabase, Elastobase P, Polyglass 62 Base or Polyglass Base
Mechanically attached
30
Polystick IN-%e or Polystick MU-X
Mechanically attached
90
HydnaGuard Dual Pro, HydraGuard Tile Pro, Polystick NITS Plus, Pelystick TU Max, Polystick
TU P, Polystick TU Plus or Polystick XFR
Any type (per Table 1)
180
Elastoflex S6 G, Elasto'ex S6 G FR, Mule -Hide SA-APP Cap Sheet, Mule -Hide SA-APP Cap
Sheet (FR), P00ex G, Polyflex G FR, Polyflex SA P or Polyflex SA P FR
Adhesive -set tile roof system
180
Mechanically attached
UNLIMITED
5.10 Tile Slippage Limitations- When loading roof tiles on the underlayment in direct -deck tile roof assemblies, the maximum roof
slope shall be as follows. These slope limitations can only be ev,cH.H he —in,o —;.... i__.:_- _.—_ __-«.__
TABU 4: TILE SUPPAGE 4MRATIONS FOR DIRER -DECK TILE INSFA11031 Ns
Underlaytnem Tile Profile Method Maximum Staging Slope
Elastoflex S6 G or S6 G FR
Flat or Lugged
stack (4 over 2)
Prohibited without battens
HydraGuard Tile Pro
Flat or Lugged
tack (4 over 2)
7:12
Polyflex G or G FR
Flat or Lugged
[ack(4 over 2)
M-
q;12
Polyflex SA P or SA P FR
Flat or Lugged
tack(4 over 2)
4:12
Polysticking
Polystick MTS Plus
Flat
tack (4 over 2)
5:12Lugged
tack(4 over 2)
4:12Flat
Polystick TU Max
over 2) or 10-tile stack
7:12
Lugged
6-tile stack (4 over 2)
7:12
Lugged
10-tllestack
6:12
Pohys[ick TUP
Flat or Lugged
6-tile stack (4 over 2)
7:12
Polystick TU Plus
Flat or Lugged
6-tile stack (4 over 2)
7:12
Flat or Lugged
10-tile stack
6:12
POlystick XFR
Flat or tugged
Prohibited without battens
Prohibited without battens
NEMO ETC, DG Evaluation Report P32060.02.09-M8
Cemjwte OfAuthorbebo WtS5 7- EDITION(20201 FBC NON-HVHZ EVALUATION FL5259-R321NON-HVK)
Polyglass Roof Undedaymems Revision n: 12/21/2020
Page 25 of 17
ONEMOletc.
6.1 Polyglass Roof Underlayments shall be Installed in accordance with Polyglass published installation instructions subject to the
Limitations set forth in Section 5 herein and the specifics noted below.
6.2 Re -fasten any loose decking panels, and check for protruding nail heads. Sweep the substrate thoroughly to remove any dust
and debris prior to application, and prime the substrate (if applicable).
6.3 Elastobase, Elastobax P or Mule -Hide Nail Base:
6.3.1 Non -Tile Ao f f
Shall be installed in compliance with requirements for an approved mechanically attached underlayment (ASTM D226, Type
11) in FBC Table 1507.1.1.1 or FBC Residential Table R905.1.1.1 for the type of prepared roof covering to be installed, and the
manufacturefs installation instructions. FBC requirements take precedence over the manufacturees installation instructions.
Elastobase, Elastobase P or Mule -Hide Nail Base may be covered with a layer of Polystick IR-Xe, Polystick MTS Plus, Polystick
MU-X, Polystick TU Max, Polystick TU P, Polystick TU Plus, Polystick XFR, Polyflex SAP, Polyflex SA P FR, Mule -Hide SA-APP Cap
Sheet or SA-APP Cap Sheet (FR), self -adhered, Elastoflex S6 G or Elastoflex S6 G FR in hot asphalt or Polyflex G or Polyflex G
R, torch applied. Roof cover limitations are those are those associated with the top -layer underlayment, as set forth in Table
6.3.2 TileAopl'caCons-
6.3.2.1 Elastobase (poly -film top), Elastobase P (poly -film top) and Mule -Hide Nail Base are limited to use as a mechanically attached
base sheet in the "TWO-PLY SYSTEM" from FRSA/TRI Florida High Wind Concrete and Clay Roof Tile Installation Manual, Sixth
Edition, followed by Polystick MTS Plus, Polystick TU Max, Polystick TU P, Polystick TU Plus, Polystick XFR, Polyflex SAP, Polyflex
SA P FR, Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR), self -adhered or Polyflex G or Polyflex G FR, torch -applied. Tile
roof installation method is limited by the selected Cap Sheet, as set forth in Table 1. Refer to Section 5.8.3.2 herein for
attachment requirements.
6.3.2.2 Elastobase (sanded -top) and Elastobase P(sanded-top)e are limited to use as a mechanically attached base Sheet inthe "TWO-
PLY SYSTEM" from FRSA/TRI Florida High Wind Concrete and Clay Roof Tile Installation Manual, Sixth Edition, followed by
Elastoflex 56 G, Elastoflex S6 G FR or an FBC Approved Mineral Surfaced Cap Sheet (ASTM D6380), asphaR-applied or Polyflex
G or Polyflex G FR, torch -applied. Tile roof installation method is limited by the selected Cap Sheet, as set forth in Table 1.
• When Elastobase (sanded -top) or Elastobase P (sanded -top) is followed by asphalt -applied Elastoflex S6 G, Elastoflex S6
G FR or FBC Approved Mineral Surfaced Cap Sheet (ASTM D6380), refer to FRSA/TRI, Sixth Edition, Appendix A, Table 1
or Section 5.8.3.2 herein for attachment requirements.
• When Elastobase (sanded -top) or Elastobase P (sanded -top) is followed by torch -applied Polyflex G or PolyFlexG FR, refer
6.4
6.4.1
5.8.3.2 nerem for attachment requlrement5
HydraGuard Dual Pro, HydraGuard Tile Pro, MU11h ide SA-APP Cap Sheet, Mule -Hide SA-APP Cap Sheet (FR), Polyflex SA P,
Polyflex SA P FR, Polystick IR-Xe, Polystick NITS Plus, Polystick MU-X, Polystick TU Max, Polystick TU P, Polystick TU Plus or
Polystick Witt
All seal -lap seams (selvage laps) must be finely rolled with a
in accordance with Polyglass requirements to ensure full
contact and adhesion. For HydraGuard Dual Pro and
HydraGuard Tile Pro, align the edge of the top sheet to the
end of the glue pattern (the sheet will overlap the fabric).
View of 0aeriap Seam of HydraGuard Dual Pm and HydraGuard ❑le Pro
NEMO ETC, U.C. Evaluad.r Report P12060.OZ.09-R28
[ertNrme lxutlwnzarwn #32455 7w EDMON(2020) FBC NOWHVHZ EVALUATION FL5259-R32(NON-HVHZ)
Polyglass Raof Underlayments Revision 28: 12/21/20M
Page 260117
6.4.2 Non -Tile Applications: ONEMOjetc.
Shall be installed in compliance with requirements for an approved self -adhering underlayment (ASTM D1970) in FBC
1507.1.1.1 or 1507.1.1.3 or FBC Residential R905.1.1.1 or R905.1.1.3 for the type of prepared roof covering to be installed,
and the manufacturers installation instructions.
When installed over a mechanically attached base sheet of FBC Approved ASTM D226, Type II felt, Elastobase, Elastobase P or
Mule -Hide Nail Base, the base sheet shall be fastened in accordance with FBC 1507.1.1 or R905.1.1.
6.4.3 Tile AO DI loationslexcludes, H draGuard Dual Pro P/vst'k IFXe andPolystick MUXI
Shall be installed in compliance with the requirements for Self -Adhered Membrane set forth in FRSA/TRI Florida High Wind
Concrete and Clay Roof Tile Installation Manual, Sixth Edition and the manufacturers installation instructions.
Refer to Section 5.8.3 herein for attachment limitations.
Refer to Table 4 herein for tile staging limitations.
6.4.4 Multi -Ply Underlayment Systems.
Polystick NITS Plus or Polystick XFR followed by HydraGuard Tile Pro, PolyflexSA P, Polystick MTS Plus, Polystick MU-X, Polystick
TU Max, Polystick TU P, Polystick TU Plus or Polystick XFR is allowable for use under mechanically attached prepared roof
systems. Limits of use are those associated with the top -layer material. This is not a requirement, but is allowable if a 2-ply
underlaymentsystem is desired.
Polystick MTS Plus followed by HydraGuard Tile Pro, Polyflex SA P, Polystick TU Max, Polystick TU P or Polystick TU Plus is
allowable for use under adhesive -set tile systems. Limits of use are those associated with the top -layer material. This is not a
requirement, but is allowable if a 2-ply underlayment system is desired.
6.5 Elastoflex S6 G or Elastoflex S6 G FR:
6.5.1 Shall be installed in compliance with requirements as an alternate to the "Hot Asphalt Applied Cap Sheet' in the "Two Ply
System" in the FRSA/TRI Florida High Wind Concrete and Clay Roof Tile Installation Manual, Sixth Edition, and the
manufacturers installation instructions.
Refer to Section 5.8.2 and 5.8.3 herein for attachment limitations.
Refer to Table 4 herein for tile staging limitations.
6.6 Polyflex G or Poyfex G FR:
6.6.1 Shall be installed in compliance with requirements as an alternate to the "Heat Applied Cap Sheet" in the 'TWO Ply System" in
the FRSA/TRI Florida High Wind Concrete and Clay Roof Tile Installation Manual, Sixth Edition, and the manufacturers
installation instructions.
Refer to Section 5.8.3 herein for attachment limitations.
Refer to Table 4 herein for tile staging limitations.
Official or Authority Having Jurisdiction to properly evaluate the installation of this product.
..., I WcL ire names u amity Tor manutacturmgfacilifles covered by F.A.C. Rule 61620-3 CIA requirements. Referto Section
4 herein for products and production locations having met codified material standards.
UL LLC—QUA9625; (414) 248-6409; Karen.buchmann(y�ul cam
END OF EVALUATION REPORT -
NENIO ETC, LLC. Evaluation Report P32060.0249-nil
CeMjiMeoJAUMMzotlon x32A55 7TM EDITION (20M)FBC NON-HVHZ EVALUATION FU259-R32INON-HVHZI
Pelyglau Roof UMerlayments Recision 28: 12/21/20M
Page 17 0 17