HomeMy WebLinkAboutNOA - PREMIUM STARTER STRIP SHINGLES f, )
M I®DARE
� Mi[AMI-DADE COUNTY
PRODUCT CONTROL SECTION
11805 SW 26 Street,Room 208
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES(RER) Miami,Florida 33175-2474
BOARD AND CODE ADMINISTRATION DIVISION T(786)315-2590 F(786)315-2599
NOTICE OF ACCEPTANCE (NOA) DECEIVED
www.miamidade.eov/economy
GAF
1 Campus Drive File C® Z
��Parsippany,NJ 07054 st.Lucie County
Permitting
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami-Dade County RER-Product Control Section to be
used in Miami-Dade County and other areas where allowed by the Authority Having Jurisdiction(AHJ).
This NOA shall not be valid after the expiration date stated below. The Miamii-Dade County Product Control Section
(in Miami-Dade County)and/or the AHJ(in areas other than Miami-Dade County)reserve th'e right to have this product
or material tested for quality assurance purposes.If this product or material fails to perform in the accepted manner,the
manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or suspend the use
of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance, if it is
determined by Miami-Dade County Product Control Section that this product or material fails to meet the requirements
of the applicable building code.
I
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: GAF Pro-Start® Starter Strip Shingles and GAF WeatherBlocker m Premium Starter Strip
Shingles
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami-Dade County Product Control Approved",unless otherwise noted herein.
i
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a' revision or change in the
materials,use,and/or manufacture of the product or process.Misuse of this NOA as an endorsement of any product, for
sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of
this NOA shall be cause for termination and removal of NOA.
i
ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any poriion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA renews NOA# 15-0922.05 and consists of pages 1 through 4.
The submitted documentation was reviewed by Alex Tigera
i
NOA No.:21-0614.04
MIAMI•DAD:COUNTY Expiration Date: 08/09/22
Approval Date: 08/05/21
Page i of 4
i
I
ROOFING ASSEMBLY APPROVAL
Category Roofing
Sub-Category: Asphalt Shingles
Material: Laminate
Deck Tvpe• Wood
1. SCOPE
This approves GAF Pro-Start' Starter Strip Shingles and GAF WeatherBlockerTM Premium Starter Strip
Shingles manufactured by GAF as described in Section 2 of this Notice of Acceptance, designed to comply with the
High Velocity Hurricane Zone of the Florida Building Code.
2. PRODUCT DESCRIPTION
Manufactured by Applicant Test Product
Dimensions Specifications Description
GAF Pro-Start' Starter Strip 13"x 38" TAS 110 Prefabricated starter strip asphalt shingle.
Shingles
Manufacturing Locations#1 and 2
GAF WeatherBlocker-1 Premium 17"x 40" TAS 110 Prefabricated starter strip asphalt shingle.
Starter Strip Shingles
Manufacturing Location #1
2.1. MANUFACTURING LOCATIONS
1. Mt.Vernon,IN
2. Sha$er,CA
2.2. EVIDENCE SUBMITTED
Test Agency Test Identifier Test Name/Report Date
PRI Asphalt Technologies,Inc. ELK-34-02-01 TAS 100 05/16/00
376T0133 ASTM D 3462 02/05/21
376T0135 ASTM D 3462 02/05/21
Underwriters Laboratories,Inc. 94NK9632 TAS 107 03/29/00
IOCA07264 ASTM D 3462 05/27/10
IONK1 1953 ASTM D 3462 10/29/10
MIAMI•DADE COUNTY
NOA No.:21-0614.04
Expiration Date: 08/09/22
Approval Date: 08/05/21
Page 2 of 4
9
3. LIMITATIONS
3.1 Fire classification is not part of this acceptance. Refer to a current Approved Roofing Materials Directory
forr-fire ratings of this product.
3.2 Shall not be installed on roof mean heights in excess of 33 ft.
3.3 All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code
and Rule 61G20-3 of the Florida Administrative Code.
4. INSTALLATION
4.1 Starter Strip Shingles shall be installed in compliance with Roofing Application Standard RAS 115.
4.2 The manufacturer shall provide clearly written application instructions.
I
5. LABELING
� J
111
Shingles shall bear the imprint or identifiable marking of the manufacturer's name or logo,city and state of
manufacturing facility,and following statement: "Miami-Dade County Product Control Approved"or the Miami-Dade
County Product Control Seal as shown below.
MIAMI-DADE COUNTY
, ...I �
6. BUILDING PERMIT REQUIREMENTS:
6.1 Application for building permit shall be accompanied by copies of the following:
6.1.1 This Notice of Acceptance.
6.1.2 Any other documents required by Building Official or Applicable building code in order to
properly evaluate the installation of this system.
I
I
i 1
i
i
i
I
I
i
I
I
NOA No.:21-0614.04
MIAMI•DAD;COUNTY Expiration Date: 08/09/22
Approval Date: 08/05/21
Page 3 of 4
I
GAF PRo-START® Eave/Rake STARTER STRIP SHINGLES
38"
5/8"
13"
- - - - - - - - - - - - - - - - - �
4 11/16"
BACK VIEW
TI
6 1/2"Typ Each shingle preforated on¢as shown F- 1 1/16"
— — — — — — — — — — — — — — --
TOP VIEW
GAF WEATHERBLOCKER—PREMIUM EAVE/RAKE STARTER STRIP SHINGLES
Self Seal
(216mm)
i
------------------- -----------------------------
17"
(432mm)
Perforation
�216mm)
END OF THIS ACCEPTANCE
NOA No.:21-0614.04
QMIAMMI-MADEourrnr Expiration Date: 08/09/22
Approval Date: 08/05/21
Page 4 of 4
61 j
I
I
I I
NEMO etc.
certificate of Authorization#32455
353 Christian Street,Unit#13
Oxford,CT 06478
(203)_262-9245
ENGINEER EVALUATE TEST CONSULT
. 6 REPORT-
GAF Evaluation Report 01506.01.08-1133
1 Campus Drive I FL10124-R31
Parsippany, NJ 07054 Date of Issuance:01/03/2008
(800)766-3411 Revision 33:08/04/2021
I
SCOPE:
This Evaluation Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida.The documentation submitted has been reviewed by Robert Nieminen,
P.E. for use of the product under the Florida Building Code. The product described herelin has been evaluated for
compliance with the 7th Edition(2020)Florida Building Code sections noted herein.
DESCRIPTION: GAF Asphalt,Roof Shingles for,use in FBC non-HVH2 jurisdict'ons
LABELING: Labeling shall be in accordance with the requirements of the Accredited Quality Assurance Agency noted
herein and FBC 1507.2.7.1/R905.2.6.1
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named products)changes,the referenced
Quality Assurance or production facility location(s) changes, or Code provisions that relate to the product(s) change.
Acceptance of our Evaluation Reports by the named client constitutes agreement to notify MEMO ETC, LLC of any
changes to the product(s), the Quality Assurance or the production facility location(s). MEMO ETC, LLC requires a
complete review of its Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT:The Florida Product Approval Number(FL#)preceded by the words"NEMO Evaluated"maybe displayed
in advertising literature. If any portion of the Evaluation Report is displayed,then it shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or
its distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists of pages 1 through 8. 1
Prepared by:
Robert J.M.Nieminen P.E. '•O,�:�.', =" The facsimile seal appearing was authorized by Robert
%;u^ :'-�•"s�•'•� Nieminen,P.E.on 09/04/2021.This does not serve as an
Florida Registration No.59166,Florida DCAANE1983 '`rr�'° "s••`'`
9 �m.��ii��` electronically signed document.
CERTIFICATION OF INDEPENDENCE:
1. NEMO ETC, LLC does not have,nor does it intend to acquire or will it acquire,a financial interest in any company manufacturing or
distributing products it evaluates.
2. NEMO ETC,LLC is not owned,operated or controlled by any company manufacturing or distributing products it evaluates.
3. Robert Nieminen, P.E.does not have nor will acquire,a financial interest in any company manufacturing or distributing products for
which the evaluation reports are being issued.
4. Robert Nieminen, P.E.does not have,nor will acquire,a financial interest in any other entity involved in the approval process of the
product.
5. This is a building code evaluation. Neither NEMO ETC,LLC nor Robert Nieminen,P.E.are,in any way,the Designer of Record for any
project on which this Evaluation Report,or previous versions thereof, is/was used for permitting or design guidance unless retained
specifically for that purpose.
02018 NEMO ETC,LLC
I
I
ONEMOletc.
ROOFING SYSTEMS EVALUATION:
O.
Product Category: Roofing
Sub-Category: Asphalt Shingles
Compliance Statement. GAF Asphalt Roof Shingles,as produced by GAF,have demonstrated compliance with the
following sections of the 71'Edition(2020)Florida Building Code through testing in accordance with the following
Standards. Compliance is subject to the Installation Requirements and Limitations/Conditions of Use set forth
herein.
oARb
Section Pro a Standard Year
1507.2.4,R905.2.3 Material standard ASTM D1970 2015
1507.2.5,R905.2.4 Material standard ASTM D3462 2010
1507.2.7.1,R905.2.6.1 Wind Resistance ASTM D3161 2016
1507.2.7.1,R905.2.6.1 Wind Resistance ASTM D7158 2019
1507.2.7.1,R905.2.6.1 Wind Resistance TAS 107 2020
Entity Examination Reference Date
PRI(TST 5878) Physical Properties GAF-025-02-01 03/27/2002
PRI(TST 5878) ASTM D3462 GAF-059-02-01 09/02/2004
PRI(TST 5878) ASTM D3462 GAF-080-02-01 05/25/2005
PRI(TST 5878) Physical Properties GAF-324-02-01 12/01/2011 /
PRI(TST 5878) ASTM D1970(QuickStart) GAF-340-02-01 03/13/2012
PRI(TST 5878) ASTM D3462 GAF-897-02-01 11/08/2018
PRI(TST 5878) ASTM D3462 GAF-898-02-01 1-1/08/2018
PRI(TST 5878) ASTM D3462 GAF-899-02-01 11/15/2018
PRI(TST 5878) ASTM D3462(IN-MV) 376TO133 02/05/2021
PRI(TST 5878) ASTM D3462(CA-S) 376TO135 02/05/2021
PRI(TST 5878) ASTM D3462(IN-MV} 376TO163 04/20/2021
UL(TST 1740) ASTUD3462 93NK6295 11/29/1993
UL(TST 1740) ASTM D3462 99NK43835 01/12/2000
UL(TST 1740) TAS 107 94NK9632 03/29/2000
UL(TST 1740) ASTM D3462 01NK06632 02/02/2001
UL(TST 1740) ASTM D3161,TAS 107 01NK9226 05/21/2001
UL(TST 1740) ASTM D3161 01NK37122 12/18/2001
UL(TST 1740) ASTM D3462 01NK37122 12/19/2001
UL(TST 1740) ASTM D3161JAS 107 02NK12980 04/10/2002
UL(TST 1740) ASTM D3161,TAS 107 02NK30871 09/09/2002
UL(TST 1740) ASTM D3161 03CA5367 03/11/2003
UL(TST 1740) ASTM D3462 03NK26444 10/17/2003
UL(TST 1740) ASTM D3462 04NK13850 06/07/2004
UL(TST 1740) ASTM D3161 04NK13850 06/23/2004
UL(TST 1740) ASTM D3161 04NK30546 03/10/2005
UL(TST 1740) ASTM D3462 04NK22009 05/06/2005
UL(TST 1740) ASTM D3161 04NK22009 05/09/2005
UL(TST 1740) ASTM D3462 05NK27924 02/10/2006
UL(TST 1740) ASTM D3161 05NK27924 02/11/2006
UL(TST 1740) ASTM D3161,D3462 06CA18077 06/05/2006
UL(TST 1740) ASTM D3161,D3462 06CA18074 06/16/2006
UL(TST 1740) ASTM D3161,D3462 06CA35251 10/18/2006
UL(TST 1740) ASTM D3462 06CA31603 12/01/2006
UL(TST 1740) ASTM D3161,D3462 06CA41095 12/27/2006
UL(TST 1740) ASTM D3161 07NK05228 03/13/2007
UL(TST 1740) ASTM D3161 06CA31611 04/04/2007
UL(TST 1740) ASTM D3161 06CA61148 04/09/2007
MEMO ETC,LLC Evaluation Report 01506.01.08-R33
Certificate ojAuthorization#32455 7-EDITION(2020)FBC NON-HVHZ EVALUATION FL10124-R31
GAF Asphalt Roof Shingles Revision 33:08/04/2021
Page 2 of 8
ONEMOjetc.
Enti Examination Reference Date
UL(TST 1740) ASTM D3161,D3462 07CA31742 11/08/2007
UL(TST 1740) ASTM D3161,D7158,D3462 08CA06100 03/13/2008
UL(TST 1740) ASTM D3161,D3462 07CA55908 04/01/2008
UL(TST 1740) ASTM D3161,D3462 09CA10592 03/26/2009
UL(TST 1740) ASTM D3161,D3462 09CA06856 05/15/2009
UL(TST 1740) ASTM D3161,D7158,D3462 09NK06647 08/01/2009
UL(TST 1740) ASTM D3161,D7158,D3462 09CA27281 08/27/2009
UL(TST 1740) ASTM D3161,D7158,D3462 IOCA35554 03/05/2010
UL(TST 1740) ASTM D3161,D7158,D3462 IOCA13686 OS/15/2010
UL(TST 1740) ASTM D3462 10CA07264 05/27/2010
UL(TST 1740) ASTM D3462 IOCA11953 10/29/2010
UL(TST 1740) ASTM D3161,D7158,D3462 IONK11951 10/30/2010
UL(TST 1740) ASTM D3161,D7158,D3462 1ONK12070 11/04/2010
UL(TST 1740) ASTM D3161,D7158,D3462 08CA06100 01/30/2010
UL(TST 1740) ASTM D3161,D7158,D3462 IOCA53934 03/31/2011
UL(TST 1740) ASTM D3161,D7158,D3462 11CA48924 19/22/2011
UL(TST 1740) ASTM D3161,D7158,D3462 11CA47919 12/03/2011
UL(TST 1740) ASTM D3161,D7158,D3462 11CA48408 12/08/2011
UL(TST 1740) ASTM D3161,D7158,D3462 11CA48725 12/09/2011
UL,LLC.(TST 9628) ASTM D3462 12CA34891 10/12/2012
UL,LLC.(TST 9628) ASTM D3161,D7158,D3462 12CA58151 02/15/2013
UL,LLC.(TST9628) ASTM D3161 12CA38083 02/26/2013
UL,LLC.(TST 9628) ASTM D3161 13CA32332 06/18/2013
UL,LLC.(TST 9628) ASTM D3161 13CA37934 08/02/2013
UL,LLC.(TST 9628) ASTM D3161,D7158,D3462 4786875675 07/17/2015
UL,LLC.(TST 9628) ASTM D3161,D7158,D3462 4787434542 05/17/2016
UL,LLC.(TST 9628) ASTM D3161,D7158,D3462 4788717529 09/09/2016
UL,LLC.(TST 9628) ASTM D3161 4788698165 11/09/2018
UL,U.C.(TST 9628) ASTM D3161 4788669132 1?/13/2018
UL,LLC.(TST 9628) ASTM D3161 4788891098 02/14/2019
UL,LLC.(TST 9628) ASTM D3161,D7158,D3462 4788932264 08/16/2019
UL,LLC.(TST 9628) ASTM D3161,D7158,D3462 4789115488 08/16/2019
UL,U.C.(TST 9628) ASTM D3161,D7158,D3462 4789115488 10/03/2019
UL,.LLC.(TST 9628) ASTM D3161 4788959558 16/17/2019
UL,LLC.(TST 9628) ASTM D3161,D7158,D3462 4786508528 11/01/2019
UL,LLC.(TST 9628) ASTM D3161 4789132672 10/27/2020
UL,LLC.(TST 9628) ASTM D3161 4789732437 04/15/2021
UL,LLC.(QUA 9625) Quality Control Service Confirmation 10/18/2018
UL,LLC.(QUA 9625) Quality Control Florida BCIS Ci rrent
PRODUCT4. DESCRIPTION:
TABLE 1:ASPHALT SHINGLE COMPONENTS
Type Product Description Material Plant(s)
j Standard
Pro-Start®Starter Strip Shingles
(fka,Pro-Start®Eave/Rake Starter starter strips for asphalt roof shingles ASTM D3462 2 CA-S,IN-MV,TX-D
Accessory Strip Shingles)
Starter mineral-surfaced,fiberglass-reinforced,self
Strips QuickStart®Peel&Stick Starter adhering SBS modified bitumen starter strip,
Roll nominal 9-inch x 33 ft roll,for use with ASTM D19I 0 CA-S,IN-MV
asphalt shingles with exposure of 6-inch or
less
I
NEMO ETC,LLC Evaluation Report 01506.01.08-1133
Certificate of Authorization#32455 7-EDITION(2020)FBC NON-HVHZ EVALUATION 1 FL10124-R31
GAF Asphalt Roof Shingles Revision 33:08/04/2021
Page 3 of 8
fONEMOjetc.
TABLE 1:ASPHALT SHINGLE COMPONENTS
Type Product Description Material Plant(s)
Standard
color-coordinated starter strips for use with
StarterMatch®Starter Strip Grand Canyon®and Grand Sequoia®series
asphalt shingles. StarterMatch®are installed ASTM D3462 CA-F
ry
Accesso Shingles as the second starterfor Grand Canyon®and
Starter Grand Sequoia®series installations
Strips WeatherBlocker—Premium
Starter Strip Shingles(fka, starter strips for asphalt roof shingles ASTM D3462 IN-MV
WeatherBlocker—Premium
Eave/Rake Starter Strip Shingles)
Marquis WeatherMax® IN-MV
Royal Sovereign® fiberglass reinforced 3-tab asphalt roof ASTM D3462 AL,CA-F,FL,GA,IN-
shingles MV,PA,TX-D
Sentinel® GA,IN-MV,TX-D
Camelot®II IN-MV
Fortitude® PA
Glenwood® IN-MV
Grand Canyon® CA-F,IN-MV
Grand Sequoia® CA-F,IN-MV
Grand Sequoia®IR CA-F,IN-MV
Grand Sequoia®ArmorShield® CA-F
Grand Sequoia®AS CA-F
Timberline®American Harvest® AL,CA-F,IN-MC,PA
-Timberline®AH AL,CA-F,IWIVIC,PA
Timberline®ArmorShield®II TX-E
Timberline®AS II TX-E
Timberline®Cool Series CA-F
Asphalt Timberline®CS CA-F
Shingles fiberglass reinforced,laminated asphalt ASTM D3462 AL,CA-S,CA-F,FL,IN-
Timberline HD® roof shingles MC,MD,MN,PA,TX-
D,TX-E
AL,CA-F,CA-S,FL,IN-
Timberline®HDZ- MC,MD,MN,PA,TX-
D,TX-E
Timberline®Natural Shadow®
AL,CA-S,IN-MC,MD,
MN,PA,TX-D,TX-E
AL,CA-S,FL,IN-MC,
Timberline®NS MD,MN,PA,TX-D,TX-
E
Timberline Ultra HD® AL,CA-S,IN-MC,MN,
PA,TX-E
Timberline®UHD
AL,CA-S,IN-MC,MN,
PA,TX-E
Woodland® IN-MV
Slateline' fiberglass reinforced 5-tab asphalt roof ASTM D3462 IN-MV
shingle
Seal-A-Ridge®ArmorShield® GA
Hip& Seal-A-Ridge®AS fiberglass reinforced,hip and ridge GA
Ridge Seal-A-Ridge Ridge Cap Shingles asphalt roof shingles ASTM D3462 GA,IN-MV
Shingles Timbertex®Premium Ridge Cap IN-MV
Shingles
NEMO ETC,LLC Evaluation Report 01506.01.08-R33
Certificate of Authorization#32455 7-EDITION(2020)FBC NON-HVHZ EVALUATION FL10124-1131
GAF Asphalt Roof Shingles Revision 33:08/04/2021
Page 4 of 8
3 _
O. NEMOJetc.
5.1 This is a building code evaluation. Neither NEMO ETC,LLC nor Robert Nieminen,P.E.arell in anyway,the Designer
of Record for any project on which this Evaluation Report,or previous versions thereof,is/was used for permitting
or design guidance unless retained specifically for that purpose. 1
5.2 This Evaluation Report is not for use in FBC High Velocity Hurricane Zone jurisdictions (i.e., Broward and Miami-
Dade Counties).
5.3 This Evaluation Report pertains to above-deck roof components. Roof decks and structural members shall be in
accordance with FBC requirements to the satisfaction of the Authority Hai ing Jurisdiction.
5.4 This Evaluation Report does not include evaluation of fire classification. Refer to FBC 1505 for requirements and
limitations regarding roof assembly fire classification. Refer to FBC 2603 for requirements and limitations
concerning the use of foam plastic insulation.
5.5 Wind Classification: Refer to Section 6 for installation requirements to meet wind classifications
TABLE 2A:WIND CLASSIFICATIONS,ASPHALT SHI PLIES
Product FBC Table 1507.2.7.1 or R905.2.6.1
Marquis WeatherMax® ASTM D3161(F)&IASTM D7158(H)
Royal Sovereign® ASTM D3161(F)&IASTM D7158(H)
Sentinel® ASTM D3161(F)&IASTM D7158(H)
Camelot®II ASTM D3161(F)&IASTM D7158(H)
Fortitude® ASTM D3161(F)&IASTM D7158(H)
Glenwood® ASTM D3161(F)&IASTM D7158(H)
Grand Canyon® ASTM D3161(F)&ASTM D7158(H)
Grand Sequoia® ASTM D3161(F)&IASTM D7158(H)
Grand Sequoia®IR ASTM D3161(F)&IASTM D7158(H)
Grand Sequoia®ArmorShield® ASTM D3161(F)&;ASTM D7158(H)
Grand Sequoia®AS ASTM D3161(F)&ASTM D7158(H)
Timberline®American Harvest® ASTM D3161(F)&ASTM D7158(H)
Timberline®AH ASTM D3161(F)&ASTM D7158(H)
Timberline®.ArmorShield®II ASTM D3161(F)&IASTM D7158(H)
Timberline®AS 11 ASTM D3161(F)&ASTM D7158(H)
Timberline®Cool Series ASTM D3161(F)&IASTM D7158(H)
Timberline®CS ASTM D3161(F)&IASTM D7158(H)
Timberline HD® ASTM D3161(F)&IASTM D7158(H)
Timberline®HDZ`"° ASTM D3161(F)&ASTM D7158(H)
Timberline®Natural Shadow® ASTM D3161(F)&IASTM D7158(H)
Timberline®NS ASTM D3161(F)&IASTM D7158(H)
Timberline Ultra HD® ASTM D3161(F)&IASTM D7158(H)
Timberline®UHD ASTM D3161(F)&IASTM D7158(H)
Woodland® ASTM D3161(F)&IASTM D7158(H)
Slateline'" ASTM D3161(F)&ASTM D7158(H
)
5.5.1 Classification by ASTM D7158: 1
ASTM D7158,Class H applies only to exposure category B or C and a building height of 60 feet or less. Calculations
by a qualified design professional are required for conditions outside these limitations. Contact the shingle
manufacturer for data specific to each shingle.
NEMO ETC,LLC Evaluation Report 01506.01.08-R33
Certificate of Authorization#32455 7-EDITION(2020)FBC NON-HVHZ EVALUATION FL10124-1131
GAF Asphalt Roof Shingles Revision 33:08/04/2021
Page 5 of 8
NNEMOJetc.
TABLE 213:WIND CLASSIFICATIONS,STARTER STRIPS AND HIP&RIDGE
Type Product FBC Table 1507.2.7.1 or R905.2.6.1
Pro-Start®Starter Strip Shingles(fka,Pro-Start®Eave/Rake ASTM D3161,Class F
Starter Strips Starter Strip Shingles)
WeatherBlocker—Premium Starter Strip Shingles(fka, ASTM D3161,Class F
WeatherBlocker—Premium Eave/Rake Starter Strip Shingles)
Seal-A-Ridge®ArmorShield® ASTM D3161,Class F
Hip&Ridge Seal-A-Ridge®AS ASTM D3161,Class F
Shingles Seal-A-Ridge®Ridge Cap Shingles ASTIVI D3161,Class F
Timbertex®Premium Ridge Cap Shingles
ASTM D3161,Class F(sealant
required,See Section 6)
5.6 All components in the roof assembly shall have quality assurance audit in accordance with F.A.C. Rule 61G20-3.
Refer to the Product Approval of the component manufacturer for components that are produced by a Product
Manufacturer other than the report holder on Page 1 of this Evaluation Report.
6. INSTALLATION:
6.1 GENERAL:
6.1.1 Roof deck, slope, underlayment and fasteners shall comply with FBC 1507.2 / R905.2 and the shingle
manufacturer's minimum requirements.
6.1.2 Underlayment shall be acceptable to GAF and shall hold current Florida Statewide Product Approval,or be Locally
Approved per Rule 61G20-3, per FBC Sections 1507.2.3,1507.2.4 or R905.2.3.
6.1.3 Fasteners shall be in accordance with manufacturer's published requirements, but not less than FBC 1507.2.6 or
R905.2.5. Staples are not permitted.
6.1.4 GAF asphalt shingles are acceptable for use in reroof(tear-off) or recover applications, subject to the limitations
set forth in FBC Section 1511 or R908 and GAF published installation instructions.
6.2 STARTER SHINGLES OR STARTER STRIP:
6.2.1 Installation of Pro-Start®Starter Strip Shingles(fka, Pro-Start®Eave/Rake Starter Strip Shingles),WeatherBlockerTI
Premium Starter Strip Shingles(fka,WeatherBlockeC' Premium Eave/Rake Starter Strip Shingles)and QuickStarto
Peel&Stick Starter Roll shall comply with the GAF current published instructions.
6.3 ASPHALT SHINGLES:
6.3.1 Installation of asphalt shingles shall comply with the GAF current published instructions,.using minimum four(4)
nails per shingle in accordance with FBC 1507.2.7 or R905.2.6,with the following exceptions:
➢ Camelot® II, Grand Canyon', Grand Sequoia®, Grand Sequoia® IR, Grand Sequoia® ArmorShield®, and
Woodland®require minimum five(5)nails per shingle.
➢ Slateline'" requires minimum six(6)nails per shingle.
NEMO ETC,LLC Evaluation Report 01506.01.08-1133
Certificate ofAuthorizotion#32455 7-EDITION(2020)FBC NON-HVHZ EVALUATION FL10124-1131
GAF Asphalt Roof Shingles Revision 33:08/04/2021
Page 6 of 8
IRMEMO jetc.
6.3.2 Fastening for Fortitude'O,Timberline®AH,Timberline®CS and Timberline,,HDZI;slope 2:12upto21:12
39-3/8"(11 m)
11-518'-14-5/8'(295mm-372mm) 1 14-518'(295mm-372mm)l I
117 21/7(13min-64mm) 1/T-2-1/2'(13mm-64mm)
13 1A" - I
1337-. ) TARGET NAIL ZONE........................
............
................. .............
. ... .. ZONA OBJETIVO BE CLAVADO
F 5-13/16--7-5/8'(146mm-194mm)
6 7/8'
(174-)
1 F
STANDARD NAILING PATTERN:
Nail shingles approximately 6 7/8'(174 mm)from bottom of shingle,in nailing area,as shown.Nails must not be exposed.Not for use on
Mansard roots(21:12 slope and above).
6.3.3 Where the roof slope exceeds 21 units vertical in 12 units horizontal, special methods lof
fastening are required.
Contact the GAF for details.
Fastening for Fortitude®,Timberline®AH,Timberline®CS and Timberline-, HDZTm;slopes greater than 21:12
14-1/7-17-1rT(368m.-445-) --- i
14-112' 17-112'(368-4451-)
6-1q-9-12'1165-241- 6-1&-9-1q(165m.-241 1
1/2-2-tT(I 3.m-64, 2-1,7(13--61-)
-13f16'-6-114'(14
13-114" 5 mm-159mm)8
(377-)
L I F
ENHANCED NAILING PATTERN:'
I These shingles MUST be nailed a nominal 6'(152 mm)from bottom of shingle,above the cut-outs,as shown.Nails must not be exposed.
6.4 Hip&RIDGE SHINGLES:
6.4.1 Installation of Seal-A-Ridge® Ridge Cap Shingles
shall comply with the GAF current published
instructions with a minimum two (2) nails, 00
minimum 3/8-inch head diameter located 6-7/8-
inch back from the exposed end and 0.5-inch
from the edge. Nail
Clavo
Clouer
' \ f
NEMO ETC,LLC Evalu'ation Report 01506.01.08-1133
Certificate of Authorization#32455 7-EDITION(2020)FBC NON-HVHZ EVALUATION 1 FL10124-R31
GAF Asphalt Roof Shingles Revision 33:08/04/2021
Page 7 of 8
1
I
I
fONEMOjetc.
6.4.2 Installation of Seal-A-Ridge®ArmorShield®and Nail
Seal-A-Ridge®AS shall comply with the GAF
current published instructions with a minimum \
two(2)nails,minimum 3/8-inch head diameter,
per shingle located 5.25-inch back from the
exposed end and 1-inch from the edge.
\ .a
i
6.4.3 Installation of Timbertex® Premium Ridge Cap 11.5' Sealant
Shingles shall comply with GAF current 1° (292mm) i 1° sellante
published instructions with a minimum two (2) (2s�m) (1---1 Enduitd'etancheile
nails, minimum 3/8-inch head diameter, per
shingle and beads of Henkel "Loctite PL Roof&
Flashing Polyurethane urethane Sealant". • •�
Nail
Clavo 12"
Clouer (305 mm)
(229 mm)
i
I
i
12'
(305 mm) i
I s
BUILDING PERMIT
•
As required by the Building Official or Authority Having Jurisdiction to properly evaluate the installation of this
product.
MANUFACTURING PLANTS.
Contact the named QA entity for manufacturing facilities covered by F.A.C.Rule 61G20-3 QA requirements. Refer
to Section 4 herein for products and production locations having met codified material standards.
QUALITY
UL LLC—QUA9625;(613)371-2765;Jacob.Stewart@ul.com
- END OF EVALUATION REPORT-
I
I
I
NEMO ETC,LLC Evaluation Report 01506.01.08-R33
Certificate of Authorization#32455 7-EDITION(2020)FBC NON-HVHZ EVALUATION I FL10124-R31
GAF Asphalt Roof Shingles i Revision 33:08/04/2021
i Page 8 of 8
I
a • J
Pro-Start° Starter Strip Shingles Specs
ABOUT SPECS. DOCS VIDEOS
(HTrPS://WWW.GAFCOM/EN- (HTTPS://WWW.GAFCOM/EN- (HTTPS://WWW.GAF.COM/EN- (HTrPS://WWW.GAF.COM/EN-
US/PRODUCTS/PROSTART) US/PRODUCTS/PRO- US/PRODUCTS/PRO- US/PRODUCTS/PRO-
START/SPECIFICATIONS) START/DOCUMENTS) START/VIDEOS)
SPECIFICATIONS (ALL DIMENSIONS ARE NOMINAL)
WIDTH 6.5" (165.1 mm); 13"(330 mm)
SURFACING Mineral
WIDTH:6.5"(165.1 mm); 13"(330 mm)
SURFACING:Mineral
CODES
FBC State of Florida Approved
__ -- - - ---------------------..__-------- - _ . - ----- 1
ICC EVALUATION REPORT ESR-1475
MIAMI-DADE COUNTY Miami-Dade County Product Control
Approved
FBC:State of Florida Approved
ICC EVALUATION REPORT:ESR-1475
MIAMI-DADE COUNTY:Miami-Dade County Product Control Approved
SHIPPING AND PACKAGING
LENGTH 38"(965.2 mm)
LENGTH:38"(965.2 mm)
We use cookies to operate our website,enhance site navigation,analyze site Cookie Preferences
usage,and assist in our marketing efforts.By clicking'Accept Cookies,"you agree
to this use.For more information please visit our Cookie Notice.
Accept Cookies