HomeMy WebLinkAboutNOA # 12-1204.01r,R
MIAMt'
INHAMI-DADE COUNTY
PRODUCT CONTROL SECTION
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)
11805 SW 26 Street, Room 208
BOARD AND CODE ADMINISTRATION DIVISION
Miami, Florida 33175-2474
T (786)315-2590 F (786)315-2599
NOTICE OF ACCEPTANCE (NOA)
w���r.miamidadc.Eo�lecanomv
CertainTeed Corporation
1400 Union Meeting Road
Blue Bell, PA 19422
SCOPE:
This NOA is being issued under the applicable riles and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami -Dade County RER - Product Control' Section to be
used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control Section
(In Miami Dade County) and/or the AHJ (in areas other than. Miami Dade County) reserve the right to have this
product or material tested for quality assurance purposes. If this product or material fails to perform in the accepted .
manner, the manufacturer wilf incur the expense of such testing and the AHJ may immediately revoke, modify, or
suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance,
if it is. determined by Miami -Dade County Product Control Section that this product or material fails to meet the
requirements of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Landmark, Landmark Pro, Landmark Premium, Landmark Impact Resistant and
Landmark Solaris
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
to its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This revises NOA #12-0403.02 and consists of pages 1 through 6.
The submitted documentation was reviewed by Alex Tigera.
N1WF7I•t)AR COUNTY
••• �.
N 9'Soll�
NOA No.:12-1204.01
Expiration Date: 02/28/17
Ap royal D
I�
ROOFING ASSEMBLY APPROVAL
Catesorv: Roofing
Sub-Cateeory. Asphalt Shingles
Materials Dimensional
Deck Type• Wood
SCOPE
This renews CertainTeed Landmark, Landmark Pro, Landmark Premium, Landmark Impact Resistant and
Landmark Solaris Shingles as manufactured by CertainTeed Corporation described in Section 2 of this Notice of
Acceptance,
PRODUCT DESCRIPTION
Product Dimensions
Test
Product Description
Specifications
Certainteed Landmark 13 V4" x 38 W
TAS 110
A heavy weight, 2471b/sq; dimensional
Manufacturing
asphalt shingle.
Locations #1, 2, 3, 4, 5, 6, 7
Certainteed Landmark Pro 13'/4" x 38 W
TAS 110
A heavy weight, 264lb/sq, dimensional
Manufacturing
asphalt shingle.
Locations #1, 3, 4, 5
Certainteed Landmark Premium 13'/4" x 38 W
TAS 110
A heavy weight, 296lb/sq, dimensional
Manufacturing
asphalt shingle.
Locations #1, 3, 4, 5
Certainteed Landmark Impact 131/4" x 38 W
TAS 110
A heavy weight, 2641b/sq, dimensional
Resistant
asphalt shingle.
Manufacturing
Locations #1, 7
Certainteed Landmark Solaris 13'/4" x 38'/"
TAS 110
A heavy weight, 296lb/sq, dimensional
Manufacturing
asphalt shingle. -
Locations #1
Accessory Shingles various
proprietary
Accessory shingles for hip, ridge and starter
strip applications.
• MANUFACTURING LOCATION(S):
1. Peachtree City, GA.
2. Ennis, TX.
3. Oxford, NC.
4. Shakopee, M.N.
5. Avery (Milan), OH
6. Norwood, MA
Z: Shreveport, LA.
NOA No.:12-1204.01
MIAMiou4ne courrnr
Expiration Date: 02/28/17
Approval Date; 03/14/13
Page 2 of 6
EVIDENCE SUBNIITTED:
Test A¢encv
Test Identifier
Test Name/Reuort
Date
Underwriters Laboratories; Inc.
R684
UL 790
04/02/01
PRI Asphalt Technologies, Inc.
PCTC 0-02-01
TAS 100
01/12/01
CTC-006-02-01
TAS 100
11/12/02
PRI-Construction Materials Technologies
CTC-092-02-01
TAS 100.
02/23/12
CTC-091-02-01
TAS 100
02/21/12
CT&690-02-01
TAS 100
' 09/02/11
CTC-087-02-.O1
TAS 100
01/07/11
CTC-086-02-01
TAS 100
07/07/11
CTC-101-62-01
TAS 100
10/05/11
CTC-1.02-02-01
TAS 160
10/65/11
CTC-109-02,01
TAS 100
01/18/12
CTC-106-02-01
TAS 100
11/02/11
CTC-105-02-01
TAS 100
10/3.1/11
CTC-089-02-01
TAS 100
07/18/11
CTC-088-02-01
TAS 100
07/18/11
Underwriters Laboratories, Inc.
94NIC9632
Wind uplift resistance TAS 107
11/30/00
02NK42448
Wind uplift resistance TAS 107
11/08/02
091CA28873
Letter
67/23/09
I ICAS9020
TAS 107/ ASTM D3161
01/25/12
11NK07864
TAS 1071 ASTM D3161
09/29/11
07CA26696
TAS 107/ ASTM D3161
09/21/07
11CA38844
TAS 107/ ASTM D3161
01/28/12
11 CA38844
TAS 107/ ASTM D3161
01/27/12
11CA38844
TAS 10VASTM D3161
01/26/12
06CA02648
TAS 107/ ASTM D3161
02/23/06
06CA28237
TAS 107/ ASTM D3161
09/22/06
1ONK17366
TAS 107/-ASTM.D3161
01/04/11
I INK08333
ASTM D3462
05/15/12
11NK08333
ASTM D3462
04/15/12
11NK07864
ASTM D3462
00/29/11
I INK08333/Letter
ASTM D3462 / UL790
11/05/12
11NK08333/Letter
ASTM D3462 / UL790
11/05/12
11NK08333/Letter
ASTM D3462 / UL790
11/65/12
NOA No.:12-1204.01
Expiration Date: 02/28/17
Approval Date: 03/14/13
Page 3 of 6
LIMITATIONS
1. Fire classification is not part of this acceptance; refer to a current Approved Roofing Materials Directory for
fire ratings of this product.
2. Shall not be installed on roof mean heights in excess of 33 ft.
3. All products listed herein shall have a quality assurance audit in accordance .with the Florida Building Code
and Rule 9N-3 of the Florida Administrative Code.
INSTALLATION
1. Shingles shall be installed in compliance with Roofing Application Standard RAS 115.
2. - Flashing shall be in accordance with Roofing Application Standard RAS 115
3. The manufacturershall provide clearly written application instructions.
4. Exposure and course layout shall be in compliance with Detail 'A', attached.
5. Nailing shall be in compliance with Detail'B attached. .
LABELING
1. Shingles shall be labeled with the Miami -Dade Product Control approved seal as seed below or the wording
"Miami -Dade County Product Control Approved".
MIAMI•DADE COUNTY
now
BUILDING PERmrr REQUIREMENTS
1. Application for buildmig permit shall be accompanied by copies of the following:
1.1 This Notice of Acceptance.
1.2 Any other documents required by the Building Official or the applicable code in order to properly
evaluate the installation of this system.
NOA No.:12-1204,01
Expiration Date: 02/28/17
Approval Date: 03/14/13
Page 4 of 6
DETAm A
Eaves
LANDMARK, LANDMARK PRo, LANDMARK PRENIIUM, LANDMARK IMPACT REsIsTANT AND
LANDMARK SOLARIs
SHINGLE LAYOUT
MIAtM[DADE'COUN
NOA No.: 12-1204,01
Expiration Date: 02/28/17
Approval Date: 03/14/13
Page 5 of 6
DETAIL B
38 3/4"
Release Tepe
Nailing area for'low and standard" slopes (from 3.5:12 to 21:12)
Nap between upper & lower nail lines,
12" 14 3/4" .: 12" 10
13 1/4"
WIDE
NAILINGr
AREA
71/2"
u
osure
7 7--
n
6
E p
1.7
LANDMARK, LANDMARK PRO, LANDMARK PRENIIIIM, LANDMARK IMPACT RESISTANT AND
LANDMARK SoLARIs
(LOW AND STANDARD SLOPE)
Release Tape
Nailing area for "aleep" slopes (greater than 21:12)
Nell between bottom 2 nall 9nea.
12" . 14 3/4" 1211 131/4"
1a
6 1/8"
Mure
.177711
LANDMARK, LANDMARK PRO, LANDMARK PREMIUM, LANDMARK IMPACT RESISTANT AND
LANDMARK SoLARIs
(STEEP SLOPE)
END OF THIS ACCEPTANCE
NOA No.: 12-1204.01
�toaoe couNTv Expiration Date: 02/28/17
e f Approval Date: 03/14/13
Page 6 of 6