Press Alt + R to read the document text or Alt + P to download or print.
This document contains no pages.
HomeMy WebLinkAboutPRODUCT APPROVAL MODIFIED BITUMEN ROOF SYSTEM5/24/2021 Florida Building Code Online
https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDqv2aBQpHpQQe9gmYq%2bqxZ1umxdDXgBEzeodazdTihCOpQ%3d%3d 1/2
BCIS Home Log In User Registration Hot Topics Submit Surcharge Stats & Facts Publications Contact Us BCIS Site Map Links Search
Product Approval
USER: Public User
Product Approval Menu > Product or Application Search > Application List > Application Detail
FL #FL17084-R10
Application Type Revision
Code Version 2020
Application Status Approved
Comments
Archived
Product Manufacturer RESISTO, a division of Soprema, Inc.
Address/Phone/Email 1675 rue Haggarty
Drummondville, NON-US 00000
(819) 478-2400 Ext 3327
memathieu@soprema.ca
Authorized Signature Marc Mathieu
memathieu@soprema.ca
Technical Representative Marc Mathieu
Address/Phone/Email 1675 rue Haggarty
Drummondville, NON-US 00000
(819) 478-2400 Ext 3327
memathieu@soprema.ca
Quality Assurance Representative
Address/Phone/Email
Category Roofing
Subcategory Modified Bitumen Roof System
Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed Florida
Professional Engineer
Evaluation Report - Hardcopy Received
Florida Engineer or Architect Name who developed the
Evaluation Report
Robert Nieminen
Florida License PE-59166
Quality Assurance Entity UL LLC
Quality Assurance Contract Expiration Date 12/21/2023
Validated By John W. Knezevich, PE
Validation Checklist - Hardcopy Received
Certificate of Independence FL17084_R10_COI_2020_01_COI_NIEMINEN.pdf
Referenced Standard and Year (of Standard)Standard Year
ASTM D1970 2015
ASTM D4601 2012
ASTM D6163 2015
ASTM D6222 2011
ASTM G155 2013
FM 4470 2016
FM 4474 2011
Equivalence of Product Standards
Certified By
5/24/2021 Florida Building Code Online
https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDqv2aBQpHpQQe9gmYq%2bqxZ1umxdDXgBEzeodazdTihCOpQ%3d%3d 2/2
Sections from the Code
Product Approval Method Method 1 Option D
Date Submitted 12/16/2020
Date Validated 12/17/2020
Date Pending FBC Approval 12/26/2020
Date Approved 02/09/2021
Summary of Products
FL #Model, Number or Name Description
17084.1 RESISTO Modified Bitumen
Roof Systems
SBS modified bitumen roof systems
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +N/A/-135
Other: 1.) The design pressure noted herein pertains
to one assembly. Refer to ER Appendix for all
assemblies and maximum design pressures. 2.) Refer
to ER Section 5 for Limits of Use.
Installation Instructions
FL17084_R10_II_2020_12_16_FINAL_ER_RESISTO_MODBIT_FL17084-
R10.pdf
Verified By: Robert Nieminen PE-59166
Created by Independent Third Party: Yes
Evaluation Reports
FL17084_R10_AE_2020_12_16_FINAL_ER_RESISTO_MODBIT_FL17084-
R10.pdf
Created by Independent Third Party: Yes
Back Next
Contact Us :: 2601 Blair Stone Road, Tallahassee FL 32399 Phone: 850-487-1824
The State of Florida is an AA/EEO employer. Copyright 2007-2013 State of Florida. :: Privacy Statement :: Accessibility Statement :: Refund Statement
Under Florida law, email addresses are public records. If you do not want your e-mail address released in response to a public-records request, do not send electronic
mail to this entity. Instead, contact the office by phone or by traditional mail. If you have any questions, please contact 850.487.1395. *Pursuant to Section 455.275(1),
Florida Statutes, effective October 1, 2012, licensees licensed under Chapter 455, F.S. must provide the Department with an email address if they have one. The emails
provided may be used for official communication with the licensee. However email addresses are public record. If you do not wish to supply a personal address, please
provide the Department with an email address which can be made available to the public. To determine if you are a licensee under Chapter 455, F.S., please click here .
Product Approval Accepts:
NEMO|etc.
Certificate of Authorization #32455
353 Christian Street, Unit #13
Oxford, CT 06478
(203) 262-9245
ENGINEER EVALUATE TEST CONSULT
EVALUATION REPORT
RESISTO a division of Soprema, Inc.
1640 rue Haggerty
Drummondville, QC J2C 5P8 Canada
(819) 478-2400
Evaluation Report 7215.06.14-R10
FL17084-R10
Date of Issuance: 06/20/2014
Revision 10: 12/16/2020
SCOPE:
This Evaluation Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida. The documentation submitted has been reviewed by Robert Nieminen,
P.E. for use of the product under the Florida Building Code. The product descr ibed herein has been evaluated for
compliance with the 7th Edition (2020) Florida Building Code sections noted herein.
DESCRIPTION: RESISTO Modified Bitumen Roof Systems
LABELING: Labeling shall be in accordance with the requirements of the Accredited Quality Assurance Agency noted
herein.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s) changes, the referenced
Quality Assurance or production facility location(s) changes, or Code provisions that relate to the product(s) change.
Acceptance of our Evaluation Reports by the named client constitutes agreement to notify NEMO ETC, LLC of any
changes to the product(s), the Quality Assurance or the production facility location(s). NEMO ETC, LLC requires a
complete review of its Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Florida Product Approval Number (FL#)
displayed in advertising literature. If any portion of the Evaluation Report is displayed, then it shall be done in i ts
entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or
its distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists of pages 1 through 4, plus a 6-page Appendix.
Prepared by:
Robert J.M. Nieminen, P.E.
Florida Registration No. 59166, Florida DCA ANE1983
The facsimile seal appearing was authorized by Robert Nieminen, P.E.
on 12/16/2020. This does not serve as an electronically signed
document.
CERTIFICATION OF INDEPENDENCE:
1. NEMO ETC, LLC does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or
distributing products it evaluates.
2. NEMO ETC, LLC is not owned, operated or controlled by any company manufacturing or distributing products it evaluates.
3. Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any company manufacturing or distributing produ cts for
which the evaluation reports are being issued.
4. Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
product.
5. This is a building code evaluation. Neither NEMO ETC, LLC nor Robert Nieminen, P.E. are, in any way, the Designer of Record for any
project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless retained
specifically for that purpose.
©2019 NEMO ETC, LLC
NEMO|etc.
NEMO ETC, LLC Evaluation Report 7215.06.14-R10
Certificate of Authorization #32455 7TH EDITION (2020) FBC NON-HVHZ EVALUATION FL17084-R10
RESISTO, a division of Soprema, Inc. Revision 10: 12/16/2020
Page 2 of 4
ROOFING SYSTEMS EVALUATION:
1. SCOPE:
Product Category: Roofing
Sub-Category: Modified Bitumen Roof Systems
Compliance Statement: RESISTO Modified Bitumen Roof Systems, as produced by RESISTO, a division of Soprema,
Inc., have demonstrated compliance with the following sections of the 7th Edition (2020) Florida Building Code
through testing in accordance with the following Standards. Compliance is subject to the Installation Requirements
and Limitations / Conditions of Use set forth herein.
2. STANDARDS:
Section Property Standard Year
1504.3.1 Wind resistance FM 4474 2011
1504.6 Physical properties ASTM G155 2013
1504.7 Impact resistance FM 4470 2016
1507.6.3 Material standard ASTM D1970 2015
1507.10.2 Material standard ASTM D4601 2012
1507.11.2 Material standard ASTM D6163 2015
1507.11.2 Material standard ASTM D6222 2011
3. REFERENCES:
Entity Examination Reference Date
ERD (TST6049) ASTM D6163 S35860.05.12-1-R2 03/14/2013
ERD (TST6049) ASTM D1970 S44870.04.14-1 and -4 04/10/2014
ERD (TST6049) FM 4474 S47190.06.14-2 06/20/2014
ERD (TST6049) ASTM D1970 SOPC-SC8970.15 07/22/2015
ERD (TST6049) FM 4474 SOPC-SC9315.07.15 07/22/2015
ERD (TST6049) ASTM D1970 SOPC-SC8970.08.15 08/31/2015
ERD (TST6049) ASTM D6163 S43400.08.14-5-R1 05/03/2017
FM Approvals (TST1867) FM 4470 3B1A0.AM 01/08/1998
FM Approvals (TST1867) FM 4470 797-08591-267 08/14/2013
NEMO (TST6049) ASTM D6163 4S-SOPC-18-003.11.18 01/14/2019
NEMO (TST6049) Criticality 4i-SOPC-19-SSCRT-02.A 10/16/2019
NEMO (TST6049) FM 4474 4a-SOPC-19-LSWUS-01.A 03/10/2020
NEMO (TST6049) ASTM D4601 4q-SOPC-20-SSMBB-01.A 03/25/2020
NEMO (TST6049) FM 4474 4a-SOPC-20-LSWUS-01.A 09/15/2020
PRI (TST5878) FM 4474 SOP-089-02-01 07/22/2016
PRI-CMT (TST5878) ASTM D6222 PRS-026-02-01 10/28/2016
PRI (TST5878) FM 4474 SOP-104-02-01 10/31/2016
PRI (TST5878) ASTM D4601 SOP-105-02-01 11/28/2016
PRI (TST5878) Criticality (TAS 117) SOP-080-02-02 12/16/2016
PRI (TST5878) FM 4474 SOP-119-02-01 04/14/2017
PRI (TST5878) FM 4474 SOP-128-02-01 08/18/2017
UL LLC (QUA9625) Quality Control Service Confirmation 05/30/2018
UL LLC (QUA9625) Quality Control Florida BCIS Current
NEMO|etc.
NEMO ETC, LLC Evaluation Report 7215.06.14-R10
Certificate of Authorization #32455 7TH EDITION (2020) FBC NON-HVHZ EVALUATION FL17084-R10
RESISTO, a division of Soprema, Inc. Revision 10: 12/16/2020
Page 3 of 4
4. PRODUCT DESCRIPTION:
4.1 This Evaluation Report covers RESISTO Modified Bitumen Roof Systems installed in accordance with RESISTO
published installation instructions and the Limitations / Conditions of Use herein. The following RESISTO
membranes make up the subject systems.
TABLE 1: ROLL-GOODS FOR MODIFIED BITUMEN ROOF SYSTEMS
Type Product Material Standard Plant(s) Reference Type Grade
Base Sheets
MODIFIED SOPRA-G ASTM D4601 II N/A OH
RESISTOFLEX ASTM D4601 II N/A MS, OH
SA Nail Base ASTM D4601 II N/A MS
Base Ply
RESISTO LB1236 ASTM D1970 N/A N/A MS, OH, QC
TRI-BUILT Sand-R
ASTM D1970 N/A N/A MS, OH, QC
PrimeSource Building Products
- ASTM D1970 N/A N/A MS, OH, QC
ASTM D1970 N/A N/A MS, OH, QC
SA Smooth Ply 40 ASTM D1970 N/A N/A QC
SA Base ASTM D6163 I S OH, QC
BITUTAK MB SMOOTH ASTM D6222 I S MO
Cap Ply
SA Cap GR ASTM D6163 I G OH
SA Cap FR GR ASTM D6163 I G OH
BITUTAK MB SMOOTH ASTM D6222 I S MO
BITUTAK MB MINERAL ASTM D6222 I G MO
5.LIMITATIONS:
5.1 This is a Building Code Evaluation. Neither NEMO ETC, LLC nor Robert Nieminen, P.E. are, in any way, the Designer
of Record for any project on which this Evaluation Report, or previous versions thereof, is/was used for permitting
or design guidance unless retained specifically for that purpose.
5.2 This Evaluation Report is not for use in FBC High Velocity Hurricane Zone jurisdictions (i.e., Broward and Miami-
Dade Counties).
5.3 This Evaluation Report pertains to above-deck roof components. Roof decks and structural members shall be in
accordance with FBC requirements to the satisfaction of the Authority Having Jurisdiction.
5.4 This Evaluation Report does not include evaluation of fire classification. Refer to FBC 1505 for requirements and
limitations regarding roof assembly fire classification. Refer to FBC 2603 for requirements and limitations
concerning the use of foam plastic insulation.
5.5 This Evaluation Report does not include evaluation of roof edge termination. Refer to FBC 1504.5 for requirements
and limitations regarding edge securement for low-slope roofs.
5.6 Refer to FBC 1511 for requirements and limitations regarding recover installations.
5.6.1 For mechanically attached components over existing roof decks, fasteners shall be tested in the existing deck for
withdrawal resistance. A qualified design professional shall review the data for comparison to the minimum
requirements for the system. Testing shall be in accordance with ANSI/SPRI FX-1 or Testing Application Standard
TAS 105.
5.6.2 For bonded insulation or membrane over existing substrates in a re-roof (tear off) or recover installation, the
existing deck or existing roof surface shall be examined for compatibility with the adhesive to be installed. If any
surface conditions exist that bring system performance into question, field uplift testing in accordance with
ANSI/SPRI IA-1, ASTM E907, FM Loss Prevention Data Sheet 1-52 or Testing Application Standard TAS 124 shall
be conducted on mock-ups of the proposed new roof assembly.
NEMO|etc.
NEMO ETC, LLC Evaluation Report 7215.06.14-R10
Certificate of Authorization #32455 7TH EDITION (2020) FBC NON-HVHZ EVALUATION FL17084-R10
RESISTO, a division of Soprema, Inc. Revision 10: 12/16/2020
Page 4 of 4
5.6.3 For bonded insulation or membrane over existing substrates in a recover installation, the existing roof system shall
be capable of resisting project design pressures on its own merit to the satisfaction of the Authority Having
Jurisdiction, as documented through field uplift testing in accordance with ASTM E907, FM Loss Prevention Data
Sheet 1-52 or Testing Application Standard TAS 124.
5.7 Refer to Appendix 1 for system attachment requirements for wind load resistance.
5.7.1
and reflects the ultimate passing pressure divided by 2 (the 2 to 1 margin of safety per FBC 1504.9 has already
been applied). Refer to FBC 1609 for determination of design wind loads.
5.7.2 For mechanically attached components or partially-bonded insulation, the maximum design pressure for the
selected assembly shall meet or exceed at least the Zone 1 PRIME design pressure determined in accordance with
FBC Chapter 16. Elevated pressure zones shall employ an attachment density designed by a qualified design
professional to resist the elevated pressure criteria. Commonly used methods are ANSI/SPRI WD1, FM Loss
Prevention Data Sheet 1-29, Roofing Application Standard RAS 117 and Roofing Application Standard RAS 137.
Assemblies marked with an asterisk* carry the limitations set forth in Section 2.2.10.1 of FM Loss Prevention Data
Sheet 1-29 (February 2020) for Zone 2/3 enhancements.
5.7.3 For assemblies with all components fully bonded in place, the maximum design pressure for the selected assembly
shall meet or exceed critical design pressure determined in accordance with FBC Chapter 16. No rational analysis
is permitted for these systems.
5.8 All components in the roof assembly shall have quality assurance audit in accordance with F.A.C. Rule 61G20-3.
Refer to the Product Approval of the component manufacturer for components listed in Appendix 1 that are
produced by a Product Manufacturer other than the report holder on Page 1 of this Evaluation Report.
6.INSTALLATION:
RESISTO Modified Bitumen Roof Systems shall be installed in accordance with RESISTO published installation
instructions, subject to the Limitations / Conditions of Use noted herein.
7.BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction to properly evaluate the installation of this
product.
8.MANUFACTURING PLANTS:
Contact the named QA entity for manufacturing facilities covered by F.A.C. Rule 61G20-3 QA requirements. Refer
to Section 4 herein for products and production locations having met codified material standards.
9.QUALITY ASSURANCE ENTITY:
UL LLC QUA9625; (414) 248-6409, karen.buchmann@ul.com
- THE SIX (6) PAGES THAT FOLLOW FORM PART OF THIS EVALUATION REPORT -
NEMO|etc.
NEMO ETC, LLC Evaluation Report 7215.06.14-R10 for FL17084-R10
Certificate of Authorization #32455 7TH EDITION (2020) FBC NON-HVHZ EVALUATION Revision 10: 12/16/2020
©2019 NEMO ETC, LLC RESISTO, a division of Soprema, Inc.; (819) 478-2400 Appendix 1, Page 1 of 6
APPENDIX 1:ATTACHMENT REQUIREMENTS FOR WIND UPLIFT RESISTANCE
TABLE DECK APPLICATION TYPE DESCRIPTION PAGE
1A Wood New or Reroof (Tear-Off) A-1 Bonded Insulation, Bonded Roof Cover 2
1B Wood New or Reroof (Tear-Off) A-2 Mech. Attached Anchor Sheet, Bonded Insulation, Bonded Roof Cover 3
1C Wood New, Reroof (Tear-Off) or Recover C-1 Mechanically Attached Insulation, Bonded Roof Cover 3
1D Wood New, Reroof (Tear-Off) or Recover D-2 Insulated, Mech. Attached Base Sheet, Bonded Roof Cover 4
1E Wood New or Reroof (Tear-Off) E-2 Non-Insulated, Mech. Attached Base Sheet (nails), Bonded Roof Cover 4-5
1F Wood New, Reroof (Tear-Off) or Recover E-2 Non-Insulated, Mech. Attached Base Sheet (screws & plates), Bonded Roof Cover 6
1G Wood New or Reroof (Tear-Off) F Non-Insulated, Bonded Roof Cover 6
The following notes apply to the systems outlined herein:
1 The roof system evaluation herein pertains to above-deck roof components. Roof decks and structural members shall be in accordance with FBC requirements to the satisfaction of the Authority Having
Jurisdiction.
2 Fasteners shall be of sufficient length for the following engagements:
Wood Deck: Min. 0.75-inch plywood penetration or minimum 1-inch wood plank embedment.
3 Unless otherwise noted, insulation may be any one layer or combination of FBC Approved (Local or Statewide) board(s) that meet FBC 1505 and, for foam plastic, FBC Chapter 26, when installed with the roof
cover.
4 Minimum 200 psi, minimum 2-inch thick FBC Approved lightweight insulating concrete may be substituted for rigid insulation board for System Types B-1, C-1, C-2, D-1 or D-2, whereby fasteners are installed
through the lightweight insulating concrete to engage the structural deck. The structural deck shall be of equal or greater type, thickness and strength to the steel and structural concrete deck listings. Roof
decks and structural members shall be in accordance with FBC requirements to the satisfaction of the Authority Having Jurisdiction. This is a wind uplift resistance allowance and does not purport to address non-
wind-uplift-related issues, such as deck venting or moisture levels within the LWIC and the potential effect on overlying components.
5 Preliminary insulation attachment for System Type D: Unless otherwise noted, refer to Section 2.2.10.1.3 of FM Loss Prevention Data Sheet 1-29 (February 2020).
6 Unless otherwise noted, insulation adhesive application rates are as follows. Ribbon or bead width is at the time of application; the ribbons/beads shall expand as note
instructions.
RESISTOBOND: Continuous 0.5 to 0.75-inch wide ribbons, max. 12-inch o.c.
DuPont INSTA STIK Quik Set Insulation Adhesive (INSTA STIK): Continuous 0.75 to 1-inch wide ribbons, max. 12-inch o.c.
OMG OlyBond 500: Continuous 0.75 to 1-inch wide ribbons, max. 12-inch o.c.
Note: When multiple layers(s) of insulation and/or coverboard are installed in ribbon-applied adhesive, board joints shall be staggered.
Note: The maximum edge distance from the adhesive ribbon to the edge of the insulation board shall be not less than one-half the specified ribbons spacing.
7 Unless otherwise noted, all insulations are flat-stock or taper board of the minimum thickness noted.
8 For adhered roof insulation and board-size: Unless otherwise noted, refer to Section 2.2.10.6.2 of FM Loss Prevention Data Sheet 1-29 (February 2020).
9 For mechanically attached components or partially-bonded insulation, the maximum design pressure for the selected assembly shall meet or exceed at least the Zone 1 PRIME design pressure determined in
accordance with FBC Chapter 16. Elevated pressure zones shall employ an attachment density designed by a qualified design professional to resist the elevated pressure criteria. Commonly used methods are
ANSI/SPRI WD1, FM Loss Prevention Data Sheet 1-29, Roofing Application Standard RAS 117 and Roofing Application Standard RAS 137. Assemblies marked with an asterisk* carry the limitations set forth in
Section 2.2.10.1 of FM Loss Prevention Data Sheet 1-29 (February 2020) for Zone 2/3 enhancements.
10 For assemblies with all components fully bonded, the maximum design pressure for the selected assembly shall meet or exceed critical design pressure determined in accordance with FBC Chapter 16. No
rational analysis is permitted for these systems.
NEMO|etc.
NEMO ETC, LLC Evaluation Report 7215.06.14-R10 for FL17084-R10
Certificate of Authorization #32455 7TH EDITION (2020) FBC NON-HVHZ EVALUATION Revision 10: 12/16/2020
©2019 NEMO ETC, LLC RESISTO, a division of Soprema, Inc.; (819) 478-2400 Appendix 1, Page 2 of 6
11 For mechanically attached components over existing decks, fasteners shall be tested in the existing deck for withdrawal resistance. A qualified design professional shall review the data for comparison to the
minimum requirements for the system. Testing and analysis shall be in accordance with ANSI/SPRI FX-1 or Testing Application Standard TAS 105.
12 For bonded insulation or membrane over existing substrates in a re-roof (tear off) or recover installation, the existing deck or existing roof surface shall be examined for compatibility with the adhesive to be
installed. If any surface conditions exist that bring system performance into question, field uplift testing in accordance shall be conducted on mock-ups of the proposed new roof assembly. For bonded insulation
or membrane over existing substrates in a recover installation, the existing roof system shall be capable of resisting project design pressures on its own merit to the satisfaction of the Authority Having
Jurisdiction, as documented through field uplift testing. Field uplift testing shall be in accordance with ASTM E907, FM Loss Prevention Data Sheet 1-52 or Testing Application Standard TAS 124.
13 Refer to FBC 1511 for requirements and limitations regarding recover installations. For Structural Concrete Deck or Recover Applications using System Type C-1, C-2, D-1 or D-2, the insulation is optional.
Alternatively, an FBC Approved insulation board or coverboard may be used as a separation layer. Board products shall be preliminarily attached prior to roof cover installation (Note 5 herein). The separator
component shall be documented as meeting FBC 1505 and, for foam plastic, FBC Chapter 26, when installed with the roof cover in Recover applications.
14 Lightweight insulating concrete (LWIC) shall be cast in accordance with FBC Section 1917 to the satisfaction of the Authority Having Jurisdiction. For systems where specific LWIC is referenced, refer to current
LWIC Product Approval for specific deck construction and limitations. Unless otherwise noted, for systems where specific LWIC is not referenced, the minimum design mix shall be 300 psi. In all cases, the
minimum top-coat thickness is 2-- through testing over
lightweight concrete cast using only foaming agent (ASTM C896), water and Portland cement (ASTM C150), with no proprietary additives, in accordance with procedures adopted by Miami-Dade BCCO (FBC
CER1592). Use of these listings in new construction or re-roof (tear-off) applications is at the discretion of the Designer or Record and Authority Having Jurisdiction.
15 For bonded membrane applications, refer to the tables herein. The following are acceptable alternates to the listed membranes.
ACCEPTABLE ALTERNATES
RESISTO Product Alternate
RESISTO LB1236
TRI-BUILT Sand-
PrimeSource -
16 A slip-sheet of Modified Sopra-G or other approved ASTM D4601, Type II fiberglass base sheet may be loose laid atop the wood deck prior to the installation of overlying mechanically fastened components with
no adverse effect on system performance.
17 1609 for determination of design wind loads
TABLE 1A: WOOD DECKS NEW CONSTRUCTION OR REROOF (TEAR-OFF)
SYSTEM TYPE A-1: BONDED INSULATION, BONDED ROOF COVER
System
No.
Deck
(Note 1)
Base Insulation Layer Top Insulation Layer(s)
Primer
Roof Cover (Note 15) MDP
(psf) Type Attach
(Notes 6,7,8) Type Attach
(Notes 6,7,8) Base Ply Ply Cap Ply
W-1.
APA rated, 7/16 CAT, 0.418 in.,
Exposure 1 OSB,
APA rated plywood or nominal
Min. 1.5-inch
ACFoam II, SOPRA-
ISO s, H-Shield or
SOPRA-ISO r
RESISTOBOND,
INSTA STIK or
OlyBond 500,
(Optional)
Additional
layers(s) base
insulation
RESISTOBOND,
INSTA STIK or
OlyBond 500,
(Optional)
RESISTO
EXTERIOR
PRIMER
RESISTO
LB1236, self-
adhering
(Optional)
BITUTAK MB
SMOOTH, torch-
applied
BITUTAK MB SMOOTH
or BITUTAK MB
MINERAL, torch-applied
-52.5
W-2.
APA rated, 7/16 CAT, 0.418 in.,
Exposure 1 OSB,
APA rated plywood or nominal
Min. 1.5-inch
ACFoam II, SOPRA-
ISO s, H-Shield or
SOPRA-ISO r
RESISTOBOND,
INSTA STIK or
OlyBond 500,
(Optional)
Additional
layers(s) base
insulation
RESISTOBOND,
INSTA STIK or
o.c.
(Optional)
RESISTO
EXTERIOR
PRIMER
RESISTO
LB1236, self-
adhering
(Optional)
BITUTAK MB
SMOOTH, torch-
applied
BITUTAK MB SMOOTH
or BITUTAK MB
MINERAL, torch-applied
-105.0
NEMO|etc.
NEMO ETC, LLC Evaluation Report 7215.06.14-R10 for FL17084-R10
Certificate of Authorization #32455 7TH EDITION (2020) FBC NON-HVHZ EVALUATION Revision 10: 12/16/2020
©2019 NEMO ETC, LLC RESISTO, a division of Soprema, Inc.; (819) 478-2400 Appendix 1, Page 3 of 6
TABLE1B: WOODDECKS NEWCONSTRUCTION OR REROOF(TEAR-OFF)
SYSTEM TYPE A-2: MECHANICALLY ATTACHED ANCHOR SHEET, BONDED INSULATION, BONDED ROOF COVER
System
No.
Deck
(Note 1)
Anchor Sheet Base Insulation Layer(s) Top Insulation Layer
Primer
Roof Cover (Note 15) MDP
(psf) Type Fasteners
(Note 11) Attach Type Attach
(Notes 6,7,8) Type Attach
(Notes 6,7,8) Base Ply Ply Cap Ply
W-3.
APA rated, 7/16
CAT, 0.418 in.,
Exposure 1 OSB,
rated plywood
T&G wood plank
SA Nail Base
32 ga., 1-5/8-
inch diameter
tin caps with
12 ga.
annular ring
shank nails
8-inch o.c. at 4-
inch wide side
laps and 8-inch
o.c. at three (3)
equally spaced
rows in the center
of the sheet
Min. 1.5-inch
ACFoam II,
SOPRA-ISO s,
H-Shield or
SOPRA-ISO r
RESISTOBOND,
INSTA STIK or
OlyBond 500,
(Optional)
Additional
layers(s)
base
insulation
RESISTOBOND,
INSTA STIK or
OlyBond 500,
(Optional)
RESISTO
EXTERIOR
PRIMER
RESISTO
LB1236,
self-
adhering
(Optional)
BITUTAK MB
SMOOTH,
torch-
applied
BITUTAK MB
SMOOTH or
BITUTAK MB
MINERAL,
torch-applied
-30.0*
W-4.
APA rated, 7/16
CAT, 0.418 in.,
Exposure 1 OSB,
rated plywood
T&G wood plank
RESISTOFLEX
32 ga., 1-5/8-
inch diameter
tin caps with
12 ga.
annular ring
shank nails
6-inch o.c. at 4-
inch wide side
laps and 6-inch
o.c. at three (3)
equally spaced
rows in the center
of the sheet
Min. 1.5-inch
ACFoam II,
SOPRA-ISO s,
H-Shield or
SOPRA-ISO r
o.c.
(Optional)
Additional
layers(s)
base
insulation
o.c.
(Optional)
RESISTO
EXTERIOR
PRIMER
RESISTO
LB1236,
self-
adhering
(Optional)
BITUTAK MB
SMOOTH,
torch-
applied
BITUTAK MB
SMOOTH or
BITUTAK MB
MINERAL,
torch-applied
-37.5*
W-5.
APA rated, 7/16
CAT, 0.418 in.,
Exposure 1 OSB,
rated plywood
T&G wood plank
RESISTOFLEX
32 ga., 1-5/8-
inch diameter
tin caps with
12 ga.
annular ring
shank nails
6-inch o.c. at 4-
inch wide side
laps and 6-inch
o.c. at four (4)
equally spaced
rows in the center
of the sheet
Min. 1.5-inch
ACFoam II,
SOPRA-ISO s,
H-Shield or
SOPRA-ISO r
INSTA STIK, 6
o.c.
(Optional)
Additional
layers(s)
base
insulation
INSTA STIK, 6
o.c.
(Optional)
RESISTO
EXTERIOR
PRIMER
RESISTO
LB1236,
self-
adhering
(Optional)
BITUTAK MB
SMOOTH,
torch-
applied
BITUTAK MB
SMOOTH or
BITUTAK MB
MINERAL,
torch-applied
-75.0
TABLE 1C: WOOD DECKS NEW CONSTRUCTION, REROOF (TEAR-OFF) OR RECOVER
SYSTEM TYPE C-1: MECHANICALLY ATTACHED INSULATION, BONDED ROOF COVER
System
No.
Deck
(Note 1)
Base Insulation
(Note 13)
Top Insulation Layer
Primer
Roof Cover (Note 15) MDP
(psf) Type Fasteners
(Note 11) Attach Base Ply Ply Cap Ply
W-6.
Min. 15/32-inch
APA rated
plywood at max.
24-inch spans
(Optional) One or more
layers, any
combination, loose laid
Min. 1.5-inch ACFoam II,
SOPRA-ISO s, H-Shield,
SOPRA-ISO r
Soprema #12 DP
Fasteners with
Insulation Plates
1 per 1.6
ft2
(Optional)
RESISTO
EXTERIOR
PRIMER
SA Smooth Ply
40 None SA Cap GR or SA Cap FR
GR -67.5
W-7.
Min. 15/32-inch
APA rated
plywood at max.
24-inch spans
(Optional) One or more
layers, any
combination, loose laid
Min. 1.5-inch ACFoam II,
SOPRA-ISO s, H-Shield,
SOPRA-ISO r
Soprema #12 DP
Fasteners with
Insulation Plates
1 per 1.6
ft2
(Optional)
RESISTO
EXTERIOR
PRIMER
RESISTO
LB1236, self-
adhering
(Optional)
BITUTAK MB
SMOOTH, torch-
applied
BITUTAK MB SMOOTH
or BITUTAK MB
MINERAL, torch-applied
-67.5
NEMO|etc.
NEMO ETC, LLC Evaluation Report 7215.06.14-R10 for FL17084-R10
Certificate of Authorization #32455 7TH EDITION (2020) FBC NON-HVHZ EVALUATION Revision 10: 12/16/2020
©2019 NEMO ETC, LLC RESISTO, a division of Soprema, Inc.; (819) 478-2400 Appendix 1, Page 4 of 6
TABLE1D: WOODDECKS NEWCONSTRUCTION,REROOF(TEAR-OFF)OR RECOVER
SYSTEM TYPE D-2: INSULATED, MECHANICALLY ATTACHED BASE SHEET, BONDED ROOF COVER
System
No. Deck (Note 1)
Insulation Layer(s)
(Note 13)
Base Sheet Roof Cover (Note 15) MDP
(psf) Type Fasteners
(Note 11) Attach Base Ply Ply Cap Ply
W-8.
APA rated, 7/16 CAT, 0.418
in., Exposure 1 OSB, min.
One or more layers, min.
1-inch, any combination,
loose-laid
SA Nail
Base
Trufast #12 DP with
Insulation Plates
8-inch o.c. at the 4-inch laps
and 8-inch o.c. at three (3),
equally spaced center rows
RESISTO LB1236,
self-adhering
(Optional)
BITUTAK MB
SMOOTH, torch-
applied
BITUTAK MB SMOOTH
or BITUTAK MB
MINERAL, torch-applied
-82.5
W-9.
APA rated, 7/16 CAT, 0.418
in., Exposure 1 OSB, min.
One or more layers, min.
1-inch, any combination,
loose-laid
MODIFIED
SOPRA-G
Trufast #12 DP with
Insulation Plates
8-inch o.c. at the 4-inch laps
and 8-inch o.c. at three (3),
equally spaced center rows
(Optional)
BITUTAK MB
SMOOTH, torch-
applied
(Optional)
BITUTAK MB
SMOOTH, torch-
applied
BITUTAK MB SMOOTH
or BITUTAK MB
MINERAL, torch-applied
-120.0
TABLE 1E: WOOD DECKS NEW CONSTRUCTION OR REROOF (TEAR-OFF)
SYSTEM TYPE E-2: NON-INSULATED, MECHANICALLY ATTACHED BASE SHEET (NAILS), BONDED ROOF COVER
System
No. Deck (Note 1)
Base Sheet
Primer
Roof Cover (Note 15) MDP
(psf) Base Fasteners
(Note 11) Attach Base Ply Primer Ply Cap Ply
W-10.
APA rated, 7/16 CAT,
0.418 in., Exposure 1
OSB
SA Nail
Base
32 ga., 1-5/8-inch
diameter tin caps with
12 ga. annular ring
shank nails
8-inch o.c. at 4-inch wide
side laps and 8-inch o.c. at
three (3) equally spaced
rows in the center of the
sheet
None
RESISTO
LB1236, self-
adhering
None
(Optional)
BITUTAK MB
SMOOTH, torch-
applied
BITUTAK MB SMOOTH or
BITUTAK MB MINERAL, torch-
applied
-30.0*
W-11.
Min. 7/16-inch OSB or
min. 15/32-inch APA
rated plywood
SOPRA-G
or
MODIFIED
SOPRA-G
32 ga., 1-5/8-inch
diameter tin caps with
11 ga. annular ring
shank nails
6-inch o.c. at the 4-inch
laps and 6-inch o.c. at four
(4), equally spaced,
staggered center rows
RESISTO
EXTERIOR
PRIMER
SA Base
RESISTO
EXTERIOR
PRIMER
None SA Cap GR or SA Cap FR GR -37.5*
W-12.Min. 19/32-inch APA
rated plywood SOPRA-G
32 ga., 1-5/8-inch
diameter tin caps with
11 ga. annular ring
shank nails
7-inch o.c. at the 4-inch
laps and 7-inch o.c. at
three (3), equally spaced,
staggered center rows
RESISTO
EXTERIOR
PRIMER
SA Base
RESISTO
EXTERIOR
PRIMER
None SA Cap GR or SA Cap FR GR -37.5
W-13.Min. 15/32-inch APA
rated plywood
SA Nail
Base
32 ga., 1-5/8-inch
diameter tin caps with
11 ga. annular ring
shank nails
8-inch o.c. at the 4-inch
laps and 8-inch o.c. at
three (3), equally spaced,
staggered center rows
None (Optional) SA
Smooth Ply 40 None None SA Cap GR or SA Cap FR GR -45.0
W-14.Min. 15/32-inch APA
rated plywood
SA Nail
Base
32 ga., 1-5/8-inch
diameter tin caps with
11 ga. annular ring
shank nails
8-inch o.c. at the 4-inch
laps and 8-inch o.c. at
three (3), equally spaced,
staggered center rows
None
RESISTO
LB1236, self-
adhering
None
(Optional)
BITUTAK MB
SMOOTH, torch-
applied
BITUTAK MB SMOOTH or
BITUTAK MB MINERAL, torch-
applied
-45.0
NEMO|etc.
NEMO ETC, LLC Evaluation Report 7215.06.14-R10 for FL17084-R10
Certificate of Authorization #32455 7TH EDITION (2020) FBC NON-HVHZ EVALUATION Revision 10: 12/16/2020
©2019 NEMO ETC, LLC RESISTO, a division of Soprema, Inc.; (819) 478-2400 Appendix 1, Page 5 of 6
TABLE1E: WOODDECKS NEWCONSTRUCTION OR REROOF(TEAR-OFF)
SYSTEM TYPE E-2: NON-INSULATED, MECHANICALLY ATTACHED BASE SHEET (NAILS), BONDED ROOF COVER
System
No. Deck (Note 1)
Base Sheet
Primer
Roof Cover (Note 15) MDP
(psf) Base Fasteners
(Note 11) Attach Base Ply Primer Ply Cap Ply
W-15.
Min. 15/32-inch OSB
or min. 15/32-inch
APA rated plywood
SOPRA-G
32 ga., 1-5/8-inch
diameter tin caps with
11 ga. annular ring
shank nails
6-inch o.c. at the 4-inch
laps and 6-inch o.c. at four
(4), equally spaced,
staggered center rows
RESISTO
EXTERIOR
PRIMER
SA Base
RESISTO
EXTERIOR
PRIMER
None SA Cap GR or SA Cap FR GR -45.0
W-16.Min. 15/32-inch APA
rated plywood
SA Nail
Base
32 ga., 1-5/8-inch
diameter tin caps with
12 ga. annular ring
shank nails
6-inch o.c. at the 4-inch
laps and 6-inch o.c. at four
(4), equally spaced,
staggered center rows
None
RESISTO
LB1236, self-
adhering
None
(Optional)
BITUTAK MB
SMOOTH, torch-
applied
BITUTAK MB SMOOTH or
BITUTAK MB MINERAL, torch-
applied
-52.5
W-17.
Min. 19/32-inch APA
rated plywood or
plank
SA Nail
Base
32 ga., 1-5/8-inch
diameter tin caps with
11 ga. annular ring
shank nails
8-inch o.c. at the 4-inch
laps and 8-inch o.c. at
three (3), equally spaced
center rows
None (Optional) SA
Smooth Ply 40 None None SA Cap GR or SA Cap FR GR -60.0
W-18.
Min. 19/32-inch APA
rated plywood or
plank
SA Nail
Base
32 ga., 1-5/8-inch
diameter tin caps with
11 ga. annular ring
shank nails
8-inch o.c. at the 4-inch
laps and 8-inch o.c. at
three (3), equally spaced
center rows
None
RESISTO
LB1236, self-
adhering
None
(Optional)
BITUTAK MB
SMOOTH, torch-
applied
BITUTAK MB SMOOTH or
BITUTAK MB MINERAL, torch-
applied
-60.0
W-19.
APA rated, 7/16 CAT,
0.418 in., Exposure 1
OSBor min. 15/32-
inch APA rated
plywood
GAP
Organic
Base
Sheet
(#43)
Simplex MAXX Cap
Fastener
6-inch o.c. at the 3-inch
laps and 6-inch o.c. at
three (3), equally spaced
center rows
None
(Optional)
BITUTAK MB
SMOOTH,
torch-applied
None
(Optional)
BITUTAK MB
SMOOTH, torch-
applied
BITUTAK MB SMOOTH or
BITUTAK MB MINERAL, torch-
applied
-60.0
W-20.
Min. 19/32-inch APA
rated plywood or
plank
SA Nail
Base
32 ga., 1-5/8-inch
diameter tin caps with
ring
shank roofing nails
6-inch o.c. at the 4-inch
laps and 6-inch o.c. at
three (3), equally spaced
center rows
None (Optional) SA
Smooth Ply 40 None None SA Cap GR or SA Cap FR GR -90.0
W-21.
Min. 19/32-inch APA
rated plywood or
plank
SA Nail
Base
32 ga., 1-5/8-inch
diameter tin caps with
ring
shank roofing nails
6-inch o.c. at the 4-inch
laps and 6-inch o.c. at
three (3), equally spaced
center rows
None
RESISTO
LB1236, self-
adhering
None
(Optional)
BITUTAK MB
SMOOTH, torch-
applied
BITUTAK MB SMOOTH or
BITUTAK MB MINERAL, torch-
applied
-90.0
W-22.
Min. 19/32-inch APA
rated plywood or
plank
SA Nail
Base
32 ga., 1-5/8-inch
diameter tin caps with
ring
shank roofing nails
4-inch o.c. at the 4-inch
laps and 4-inch o.c. at four
(3), equally spaced center
rows
None (Optional) SA
Smooth Ply 40 None None SA Cap GR or SA Cap FR GR -105.0
W-23.
Min. 19/32-inch APA
rated plywood or
plank
SA Nail
Base
32 ga., 1-5/8-inch
diameter tin caps with
ring
shank roofing nails
4-inch o.c. at the 4-inch
laps and 4-inch o.c. at four
(3), equally spaced center
rows
None
RESISTO
LB1236, self-
adhering
None
(Optional)
BITUTAK MB
SMOOTH, torch-
applied
BITUTAK MB SMOOTH or
BITUTAK MB MINERAL, torch-
applied
-105.0
NEMO|etc.
NEMO ETC, LLC Evaluation Report 7215.06.14-R10 for FL17084-R10
Certificate of Authorization #32455 7TH EDITION (2020) FBC NON-HVHZ EVALUATION Revision 10: 12/16/2020
©2019 NEMO ETC, LLC RESISTO, a division of Soprema, Inc.; (819) 478-2400 Appendix 1, Page 6 of 6
TABLE1F: WOODDECKS NEWCONSTRUCTION,REROOF(TEAR-OFF)OR RECOVER
SYSTEM TYPE E-2: NON-INSULATED, MECHANICALLY ATTACHED BASE SHEET (SCREWS & PLATES), BONDED ROOF COVER
System
No. Deck (Note 1)
Base Sheet
Primer
Roof Cover (Note 15) MDP
(psf) Base Fasteners
(Note 11) Attach Base Ply Primer Ply Cap Ply
W-24.
Min. 19/32-inch APA
rated plywood or
plank
SA Nail
Base
Trufast #12 DP with
Insulation Plates
8-inch o.c. at the 4-inch laps
and 8-inch o.c. at three (3),
equally spaced center rows
None (Optional) SA
Smooth Ply 40 None None SA Cap GR or SA Cap FR GR -127.5
W-25.
Min. 19/32-inch APA
rated plywood or
plank
SA Nail
Base
Trufast #12 DP with
Insulation Plates
8-inch o.c. at the 4-inch laps
and 8-inch o.c. at three (3),
equally spaced center rows
None
RESISTO
LB1236, self-
adhering
None
(Optional)
BITUTAK MB
SMOOTH, torch-
applied
BITUTAK MB SMOOTH or
BITUTAK MB MINERAL, torch-
applied
-127.5
TABLE 1G: WOOD DECKS NEW CONSTRUCTION OR REROOF (TEAR-OFF)
SYSTEM TYPE F: NON-INSULATED, BONDED ROOF COVER
System
No. Deck (Notes 1 & 12) Primer Roof Cover (Note 15) MDP (psf) Base Ply Primer Ply Cap Ply
W-26.Min. 7/16-inch APA rated OSB or min.
15/32-inch APA rated plywood
RESISTO EXTERIOR
PRIMER SA Base RESISTO EXTERIOR
PRIMER None SA Cap GR or SA Cap FR GR -45.0
W-27. Min. 15/32-inch APA rated OSB None SA Smooth Ply 40 None None SA Cap GR or SA Cap FR GR -67.5
W-28. Min. 15/32-inch APA rated OSB
RESISTO EXTERIOR
PRIMER SA Smooth Ply 40 None None SA Cap GR or SA Cap FR GR -75.0
W-29.APA rated, 7/16 CAT, 0.418 in., Exposure
1 OSB,
(Optional) RESISTO
EXTERIOR PRIMER
RESISTO LB1236,
self-adhering None (Optional) BITUTAK MB
SMOOTH, torch-applied
BITUTAK MB SMOOTH or BITUTAK MB
MINERAL, torch-applied -97.5
W-30. Min. 15/32-inch APA rated plywood None SA Smooth Ply 40 None None SA Cap GR or SA Cap FR GR -105.0
W-31. Min. 15/32-inch APA rated plywood
RESISTO EXTERIOR
PRIMER SA Smooth Ply 40 None None SA Cap GR or SA Cap FR GR -112.5
W-32. (Optional) RESISTO
EXTERIOR PRIMER
RESISTO LB1236,
self-adhering None (Optional) BITUTAK MB
SMOOTH, torch-applied
BITUTAK MB SMOOTH or BITUTAK MB
MINERAL, torch-applied -135.0
4/28/2021 Florida Building Code Online
https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDqtFPmdYiNDWrzpAW2f4z32FAkyOs%2fFQU8c%3d 1/2
BCIS Home Log In User Registration Hot Topics Submit Surcharge Stats & Facts Publications Contact Us BCIS Site Map Links Search
Product Approval
USER: Public User
Product Approval Menu > Product or Application Search > Application List > Application Detail
FL #FL1608-R7
Application Type Revision
Code Version 2020
Application Status Approved
*Approved by DBPR. Approvals by DBPR shall be reviewed and ratified by
the POC and/or the Commission if necessary.
Comments
Archived
Product Manufacturer OMG, Inc.
Address/Phone/Email 153 Bowles Rd
Agawam, MA 01001
(800) 633-3800
SChilds@omginc.com
Authorized Signature Stephen Childs
SChilds@omginc.com
Technical Representative
Address/Phone/Email
Quality Assurance Representative
Address/Phone/Email
Category Roofing
Subcategory Cements-Adhesives-Coatings
Compliance Method Certification Mark or Listing
Certification Agency Miami-Dade BCCO - CER
Validated By Robert Nieminen, PE, NEMO ETC, LLC
Validation Checklist - Hardcopy Received
Referenced Standard and Year (of Standard)Standard Year
ASTM D1621 2016
ASTM D1622 2020
ASTM D1623 2017
ASTM D1929 2016
ASTM D2842 2019
ASTM D2856 1998
ASTM E84 2016
Equivalence of Product Standards
Certified By
Product Approval Method Method 1 Option A
4/28/2021 Florida Building Code Online
https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDqtFPmdYiNDWrzpAW2f4z32FAkyOs%2fFQU8c%3d 2/2
Date Submitted 12/22/2020
Date Validated 12/22/2020
Date Pending FBC Approval
Date Approved 01/01/2021
Summary of Products
FL #Model, Number or Name Description
1608.1 OMG Low Rise Membrane Adhesive Two part urethane adhesive for fleece-back single ply roof
membrane securement.
Limits of Use
Approved for use in HVHZ: Yes
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: N/A
Other: Limited to roof cover uplift ratings per Florida Product
Approval for the roof system.
Certification Agency Certificate
FL1608_R7_C_CAC_16030306.pdf
Quality Assurance Contract Expiration Date
10/13/2021
Installation Instructions
FL1608_R7_II_16030306.pdf
Verified By: Miami-Dade BCCO - CER
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party:
1608.2 OMG OlyBond, OlyBond 500 and
OlyBond 500 Green Adhesives
Two-part urethane adhesives for insulation securement.
Limits of Use
Approved for use in HVHZ: Yes
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: N/A
Other: Limited to roof cover uplift ratings per Florida Product
Approval for the roof system
Certification Agency Certificate
FL1608_R7_C_CAC_19090403.pdf
Quality Assurance Contract Expiration Date
07/29/2022
Installation Instructions
FL1608_R7_II_19090403.pdf
Verified By: Miami-Dade BCCO - CER
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party:
Back Next
Contact Us :: 2601 Blair Stone Road, Tallahassee FL 32399 Phone: 850-487-1824
The State of Florida is an AA/EEO employer. Copyright 2007-2013 State of Florida. :: Privacy Statement :: Accessibility Statement :: Refund Statement
Under Florida law, email addresses are public records. If you do not want your e-mail address released in response to a public-records request, do not send electronic
mail to this entity. Instead, contact the office by phone or by traditional mail. If you have any questions, please contact 850.487.1395. *Pursuant to Section 455.275(1),
Florida Statutes, effective October 1, 2012, licensees licensed under Chapter 455, F.S. must provide the Department with an email address if they have one. The emails
provided may be used for official communication with the licensee. However email addresses are public record. If you do not wish to supply a personal address, please
provide the Department with an email address which can be made available to the public. To determine if you are a licensee under Chapter 455, F.S., please click here .
Product Approval Accepts:
NOA No.: 19-0904.03
Expiration Date: 07/29/22
Approval Date: 05/14/20
Page 1 of 4
MIAMI-DADE COUNTY
PRODUCT CONTROL SECTION
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)11805 SW 26 Street, Room 208
BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474
T (786) 315-2590 F (786) 315-2599
NOTICE OF ACCEPTANCE (NOA) www.miamidade.gov/economy
OMG, Inc.
153 Bowles Road
Agawam, MA 01001-0508
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami-Dade County RER - Product Control Section to be
used in Miami-Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product Control Section
(in Miami-Dade County) and/or the AHJ (in areas other than Miami-Dade County) reserve the right to have this product
or material tested for quality assurance purposes. If this product or material fails to perform in the accepted manner, the
manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or suspend the use
of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance, if it is
determined by Miami-Dade County Product Control Section that this product or material fails to meet the requirements
of the applicable building code.
This product is approved as described herein and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: OMG OlyBond, OlyBond 500 & OlyBond 500 Green Adhesives
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami-Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for
sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of
this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA revises NOA No. 17-0519.04 and consists of pages 1 through 4.
The submitted documentation was reviewed by Jorge L. Acebo.
NOA No.: 19-0904.03
Expiration Date: 07/29/22
Approval Date: 05/14/20
Page 2 of 4
ROOFING COMPONENT APPROVAL
Category: Roofing
Sub-Category: Cements, Adhesives and Coatings
Material: Polyurethane
SCOPE:
This approves OMG OlyBond Classic, OlyBond 500, OlyBond 500 Canister, OlyBond 500 SpotShot, OlyBond 500
Green & OlyBond 500 Green SpotShot adhesives as manufactured by OMG, Inc., as described in this Notice of
Acceptance. The use of this acceptance is limited to those roof assemblies were OMG OlyBond Classic, OlyBond
500, OlyBond 500 Canister, OlyBond 500 SpotShot, OlyBond 500 Green & OlyBond 500 Green SpotShot
adhesives are specifically listed as an accepted component.
PRODUCT DESCRIPTION:
Spray Polyurethane Foam with the properties described below:
Description Test Properties
OMG OlyBond Classic
Flame Spread Index ASTM E84 15
Smoke Develop Index ASTM E84 10
Self Ignition Temperature ASTM D1929-91 698° F
Density @ 73° F ASTM D 1622 5.03 lbs./ft3
Compressive Strength @ 10% deformation ASTM D 1621 18.02 psi
Tensile ASTM D 1623 42.04 psi
Water Absorption ASTM D 2842 2.75%
Packaging Options
Drum: 15 or 55 gal
Note: The physical properties listed above are presented at typical average values as determined
by accepted ASTM test methods and are subject to normal manufacturing variation.
OMG OlyBond 500, OlyBond 500 Canister, OlyBond500 SpotShot
Flame Spread Index ASTM E84 15
Smoke Develop Index ASTM E84 10
Self Ignition Temperature ASTM D1929-91 698° F
Density @ 73° F ASTM D 1622 5.03 lbs./ft3
Compressive Strength @ 10% deformation ASTM D 1621 18.02 psi
Tensile ASTM D 1623 2.04 psi
Water Absorption ASTM D 2842 2.75%
Packaging Options
SpotShot Cartridge: 1500 ml
Bag-in-Box: 5 gal
Drum: 15 gal
Canister: 68 lbs
Note: The physical properties listed above are presented at typical average values as determined
by accepted ASTM test methods and are subject to normal manufacturing variation.
NOA No.: 19-0904.03
Expiration Date: 07/29/22
Approval Date: 05/14/20
Page 3 of 4
OMG OlyBond 500 Green, OlyBond 500 Green SpotShot
Flame Spread Index ASTM E84 15
Smoke Develop Index ASTM E84 10
Self Ignition Temperature ASTM D1929-91 698° F
Density @ 73° F ASTM D 1622 3.38 lbs./ft3
Compressive Strength @ 10% deformation ASTM D 1621 25.89 psi
Tensile ASTM D 1623 67.64 psi
Water Absorption ASTM D 2842 20.1%
Packaging Options
SpotShot Cartridge: 1500 ml
Bag-in-Box: 5 gal
Drum: 15 gal
Note: The physical properties listed above are presented at typical average values as determined
by accepted ASTM test methods and are subject to normal manufacturing variation.
MANUFACTURING LOCATION:
1. Rockford, MN
EVIDENCE SUBMITTED:
Test Agency Test Identifier Test Specification Date
UL LLC UL 723 R18910 06/27/17
FM Approvals 3001472 4450/4470 04/14/99
3008869 4470 03/19/01
3014692 4470 08/05/03
3031350 4470 09/27/07
RCMA Americas, Inc. CX23A7A Physical Properties 03/07/17
CX16C7A Physical Properties 04/19/17
R & D Services, Inc. RD17092 ASTM D2842 02/16/17
RD17420 ASTM D2842 06/30/17
LIMITATIONS:
1. OMG OlyBond Classic, OlyBond 500, OlyBond 500 Canister, OlyBond 500 SpotShot, OlyBond 500 Green &
OlyBond 500 Green SpotShot adhesives shall have a quality control testing program by an approved independent
listing agency having unannounced follow-up visits. Follow up test results shall be made available to Miami-Dade
County Product Control upon request.
2. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and
Rule 61G20-3 of the Florida Administrative Code.
NOA No.: 19-0904.03
Expiration Date: 07/29/22
Approval Date: 05/14/20
Page 4 of 4
INSTALLATION:
OMG OlyBond Classic, OlyBond 500, OlyBond 500 Canister, OlyBond 500 SpotShot, OlyBond 500 Green &
OlyBond 500 Green SpotShot adhesives shall be installed in strict compliance with the Roof Assembly Notice of
Acceptance and manufacturer
LABELING:
OMG OlyBond Classic, OlyBond 500, OlyBond 500 Canister, OlyBond 500 SpotShot, OlyBond 500 Green &
OlyBond 500 Green SpotShot adhesives shall be labeled in compliance with TAS 121 and shall bear the imprint or
identifiable marking of the manufacturer's name or logo, city, state and following statement: "Miami-Dade County
Product Control Approved" or the Miami-Dade County Product Control Seal as shown below.
BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or applicable Building Code in order to properly evaluate the installation of
this system. This Notice of Acceptance on its own cannot be used to obtain a building permit.
END OF THIS ACCEPTANCE