HomeMy WebLinkAboutAPPROVED FL242-C21-0205.02 PGT -JUREWICZNOA No. 21-0 205.0 2
Expiration Date: August 04, 202 6
Approval Date: March 25 , 2 021
Page 1
MI AMI-DADE COUNTY
PRODUCT CONTROL SECTION
11805 SW 26 Street, Room 208
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) Miami, Florida 33175-2474
BOARD AND CODE ADMINISTRATION DIVISION T (786) 315-2590 F (786) 315-2599
NOTICE OF ACCEPTANCE (NOA) www.miamidade.gov/economy
PGT Industries, Inc.
1070 Technology Drive,
North Venice, Fl. 34275
S COPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami-Dade County RER -Product Control Section to
be used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product Control Section
(In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right to have this
product or material tested for quality assurance purp oses. If this product or material fails to perform in the accepted
manner, the manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or
suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this
acceptance, if it is determined by Miami-Dade County Product Control Section that this product or material fails to
meet the requirements of the applicable building code.
This product is approved as described herein and h as been designed to comply with the Florida Building Code,
including the High Velocity Hurricane Zone.
DESCRIPTION: Series “SGD 5 570-Window” Vinyl Horizontal Sliding Glass Window (Reinforced) w/ wo 900
and 1350 corners and w/wo Pockets-L.M.I.
APPROVAL DOCUMENT: Drawing No. MD-5570 W.0 Rev C, titled “Vinyl Sliding Glass Window”, sheets 1
through 21 of 21, prepared by manufacturer, dated 03/22/20 and last revised on 02/01/21, signed and sealed by
Anthony L. Miller, P.E., bearing the Miami-Dade County Product C ontrol Revision stamp with the Notice of
Acceptance number and revision date by the Miami-Dade County Product Control Section.
MISSILE IMPACT RATING: Large and Small Missile Impact Resistant
Limitations:
1.See table 1 (sheet 7) and table 2 (sheet 8) of this approved drawing set for applicable Window unit sizes,
design pressures, reinforcements types, glass types, sill riser (Table B1 & B2) and anchors requirements.
2.See glass options in sheet 10. Product can be Exterior or Interior glazed. Interior glazed to be rotated 1800
shown, such that “HS” surface of laminated glass adhered to glazing leg.
3.Rigid White PVC, Tan (Non-white) Rigid PVC and Brown coated (Painted or laminated) white Rigid
PVC manufactured by Vision Extrusion, Ltd to be labeled per referenced NOA’s requirements.
4.Pocket walls under separate approval, to be reviewed by Building official.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no
change in the applicable building code negative ly affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement o f any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any
section of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Mia mi-Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be
done in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA revises & renews # 20-0406 .06 consists of this page 1 and evidence pages E-1 , E-2, E-3 & E-4 , as well
as approval document mentioned above.
The submitted documentation was reviewed by Ishaq I. Chanda, P.E.
Ishaq I. Cha nda, P.E.
Product Control Unit Supervisor
NOA No. 2 1-0 205.0 2
Expiration Date: August 04, 2026
Approval Date: March 25 , 20 2 1
E - 1
PGT Industries, Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
1.Evidence submitted under previous submit t al
A. DRAWINGS
1.Manufacturer's die drawings and sections (Submit ted under files see below ).
2.Drawing No. MD-5570W.0 Rev A, titled “Vinyl Sliding Glass Window”, sheets 1 through 21 of 21,
prepared by manufacturer, dated 04/14/16 and last revised on 04/18/17, signed and sealed by Anthony L.
Miller, P.E.
Note: This rev ision consists of adding FBC 2017 (6th Edition) and identifying PVC extruder notes.
B. TESTS (Submitted under files # 16-0505.01 /#15-1210.01 )
1.Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
3) Water Resistance Test, per FBC, TAS 202-94.
4) Large Missile Impact Test per FBC, TAS 201-94
5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
6) Forced Entry Test, per FBC, TAS 202-94
along with marked -up drawings and installation diagram of vinyl sliding glass doors, prepared by
Fenestration Testing Lab, Inc., Test Report No. FTL 8546 dated 11/06/15 and revised on 01/04/16
& 02/11/16, FTL 8547 dated 12/04/15 and revised on 02/15/16, Test Report No. FTL 8548, dated
12/04/15 & revised on 01/04/16 & 02/11/16, FTL 8549 dated 11/06/15 and revised on 12/04/15 and
02/11/16, FTL 8552 dated 12/0 4/15 and 02/15/2016, all signed and sealed by Idalmis Ortega, P. E.
2. Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
3) Water Resistance Test, per FBC, TAS 202-94.
4) Large Missile Impact Test per FBC, TAS 201-94
5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
6) Forced Entry Test, per FBC 2411.3.2.1 (b) and TAS 202-94
along with marked-up drawings and installation diagram of vinyl sliding glass door, prepared by
Fenestration Testing Lab, Inc., Test Report No. FTL 6638 (samples A-1 thru A-22), dated
11/19/10, signed and sealed by Jorge A. Causo, P. E.
(The above test report has an addendum letter dated 3-11-11, issued by FTL, signed and sealed by
Marlin D. Brinson, P.E. (reviewing Engineer). (Submitted under file # 15-0409.02/#13-1125.05 )
3.REF Test report on 1) Uniform Static Air Pressure Test, per FBC, TAS 202-94
2) Large Missile Impact Test per FBC, TAS 201-94
3) Cyclic Wind Pressure Loading per FBC, TAS 203-94
Along with marked-up drawings and installation diagram of Aluminum Sliding Glass Doors (w/
TPS, Super, Cardinal & Duraseal Spacers), prepared by Fenestration Testing Laboratory, Inc.,
Test Report s No(s) FTL-8717, FTL-8970 and FTL-8968, dated 02/15/16, 06/07/16 and
06/20/16, all signed & sealed by Idalmis Ortega, P.E
4.Additional REF test report No. FTL 6637 (samples A-1 thru A-5) per TAS 202-94, issued by
Fenestration Testing Lab, Inc., dated 12/06/10, signed and sealed by Jorge A. Causo, P. E.
Ishaq I. Chanda, P.E.
Product Control Unit Supervisor
NOA No. 2 1-0 205.0 2
Expiration Date: August 04 , 202 6
Approva l Da te: March 25 , 20 2 1
E - 2
PGT Industr ies, Inc.
NOTIC E OF ACCEPTANCE: EVIDENCE SUBMITTED
C.CALCULATIONS (Submitted under files # 16-0505.01)
1.Statement letter of compliance to FBC 2017 (6th Edition) dated 08/02/1 7, prepared by PGT,
signed and sealed by Anthony L. Miller, P.E.
2. Anchor verification calculations and structural analysis, complying with FBC-2014 (5th edition),
prepared by PGT, dated 05/02/16, signed and sealed by Anthony L. Miller, P.E.
3.Glazing complies with ASTME-1300-02, -04 & -09.
D.QUALITY ASSURANCE
1.Miami Dade Department of Regulatory and Economic Resources (RER).
E.MATERIAL CERTIFICATIONS
1.Notice of Acceptance No. 14-0820.11 issued to Vision Extrusion Ltd for their “White Rigid
PVC”, expiring on 09/30/19.
2.Notice of Acceptance No. 16-0920.08 issued to Vision Extrusion Lt d for their “VE 1000 Tan
202 & light shaded (Non-White) Rigid PVC ”, expiring on 12/29/21.
3.Notice of Acceptance No. 14-0820.12 issued to Vision Extrusion Ltd for their “Brown Coated
(Painted or Laminated) White Rigid PVC ”, expiring on 09/30/19
4.Test reports No(s). 10-002-792(A), 10-006-10231, 535753-09, per ASTME-84, ASTMD1929
and ASTMD-635, issued by EXOVA to Vision Extrusion for cellulosic composite material.
5.Notice of Acceptance No. 14-0916.11 issued to Kuraray America., Inc. for the “Sentry Glass ®
(Clear and White) Interlayer”, expiring on 07/04/18.
6.Notice of Acceptance No. 16-1117.01 issued to Kuraray America, Inc. for the “Trosifol ultra
clear, clear & color PVB glass interlayer (former Kuraray Butacite PVB Interlayer)”,
expiring on 07/08/19.
F.STATEMENTS
1. Statement letter of compliance to FBC 2017 (6th Edition) dat ed 08/02/18, prepared by PGT,
signed and sealed by Anthony L. Miller, P.E.
2.Statement letters of compliance to FBC 2014 (5th Edition) and “No financial interest”, dated
05/02/16, prepared by PGT, signed & sealed by Lynn Miller, P.E. (Submitted under files # 16-
0505.01)
3.Letter of lab compliance, part of the above test reports.
G.OTHER
1.This NOA revises # 16-0505.01 , expiring 04/04/21 .
2.Test proposals #16-0152 dated 03/09/16 approved by RER, test proposal dated April 17, 2015
approved by Jaime D. Gascon, P.E. and # 10-0767, dated 08/25/10 approved by BCCO.
2.New Evidence submitted
A. DRAWINGS
1. Drawing No. MD -5570W.0 Rev B, titled “Vinyl Sliding Glass Window”, sheets 1 through 21
of 21, prepared by manufacturer, dated 03/22/20 and last revised on 04/02/20, signed and sealed
by Anthony L. Miller, P.E.
Ishaq I. Chanda, P.E.
Product Control Unit Supervisor
NOA No. 2 1-0 205.0 2
Expiration Date: August 04 , 202 6
Approva l Da te: March 25 , 20 2 1
E - 3
PGT Industries, Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
2.New Evidence submitted (continue)
B. TESTS
1.Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
3) Water Resistance Test, per FBC, TAS 202-94.
4)Large Missile Impact Test per FBC, TAS 201-94
5)Cyclic Wind Pressure Loading per FBC, TAS 203-94
6) Forced Entry Test, per ASTM F588 and TAS 202-94
along with marked -up drawings and installation diagram of all PGT Industries, Inc. representative units
listed below and tested to qualify Dow sil 791 and Dowsil 983 silicones, prepared by Fenestration
Te sting Laboratory, Inc., Test Report s No.: FTL-7897, PGT PW5520 PVC Fixed Window (unit 6 in
proposal), dated 09/03/14FTL-20-2107.1, PGT SGD780 Aluminum Sliding Glass Door (unit 7 in
proposal) FTL-20-2107.2, PGT CA740 Alum. Outswing Casement Window (unit 8 in proposal) FTL-
20-2107.3, PGT PW7620A Aluminum Fixed Window (unit 9 in proposal) and FTL-20-2107.4, PGT
PW7620A Aluminum Fixed Window (unit 10 in proposal) dated 07/13/20, all signed and sealed by
Idalmis Ortega, P.E.
C. CALCULATIONS
1.Anchor verificat ion calculations and Ultracon+ anchor comparison, complying with FBC 7th
Edition (2020) dtd 04/02/20, prepared by manufacturer, signed and sealed by A. Lynn Miller, P.E.
2.Glazing complies with ASTME-1300-09.
D.QU ALITY ASSURANCE
1.Miami Dade Department of Regulatory and Economic Resources (RER
E.MATERIAL CERTIFICATIONS
1.Notice of Acceptance No. 18-1108.10 issued to Vision Extrusion Ltd for their “White Rigid
PVC”, expiring on 09/30/24.
2.Notice of Acceptance No. 16-0920.08 issued to Vision Extrusion Ltd for their “VE 1000 Tan 202
& light shaded (Non-White) Rigid PVC”, expiring on 12/29/21.
3.Notice of Acceptance No. 18-1108.11 issued to Vision Extrusion Ltd for their “Brown Coated
(Painted or Laminated) White Rigid PVC ”, expiring on 10/29/21
4. Test reports No(s). 10-002-792(A), 10-006-10231, 535753-09, per ASTME-84, ASTMD1929 and
ASTMD-635, issued by EXOVA to Vision Extrusion for cellulosic composite material.
5.Notice of Acceptance No. 17-0808.02 issued to Kuraray America., Inc. for the “Sentry Glass ®
(Clear and White) Interlayer”, expiring on 07/04/23.
6.Notice of Acceptance No. 17-1114.13 issued to Kuraray America, Inc. for the “Trofosil ultra clear,
clear & color PVB glass interlayer (former Kuraray Butacite PVB Interlayer)”, expiring on
07/08/24.
F.STATEMENTS
1.Statement letter of compliance to FBC 2020 (7th Edition) and “No financial interest” dated 04/02/20,
prepared by PGT, signed and sealed by Anthony L. Miller, P.E.
2.Letter of lab compliance, part of the above test reports.
G.OTHER
1.This NOA revises # 17-0420.16 , for FBC 2020 updates, expiring 08/04/21.
2.RER Test proposals #19-1155 dated 01/10/20 approved by Ishaq I. Chanda, P.E.
Ishaq I. Chanda, P.E.
Product Control Unit Supervisor
NOA No. 2 1-0 205.0 2
Expiration Date: August 04 , 202 6
Approva l Da te: March 25 , 20 2 1
E - 4
PGT Industries, Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
3.New Evidence submitted
A. DRAWINGS
1. Drawing No. MD -5570W.0 Rev C, titled “Vinyl Sliding Glass Window ”, sheets 1 through 21 of
21, prepared by manufacturer, dated 03/22/20 and last revised on 02/01/21, signed and sealed by
Anthony L. Miller, P.E.
Note: This revision consists replacement of same existing installation screw with flat head.
B.TESTS
1.None.
C. CALCULATIONS
1. None.
D.QUALITY ASSURANCE
1.Miami-Dade Department of Regulatory and Economic Resources (RER).
E.MATERIAL C ERTIFICATIONS
1. None.
F.STATEMENTS
1.Statement letter of conf ormance to FBC 7 th Edition (2020), dated 02/01/21, issued by manufacturer,
signed and sealed by Anthony Lynn Miller, P.E.
2.Statement let ter of no financial interest and of independent, issued by manufacturer, dated 02/01 /21 ,
signed and sealed by Anthony Lynn Miller, P.E.
G .OTHERS
1.This NOA revises & renews N OA# 20-0406.06, expiring 08/04/2 6.
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02
PRODUCT RE9,6ED as complying with the Florida Building CodeNO$²No E[piration Date By 0iami²Dade Product Control 08/04/202621-0205.02