HomeMy WebLinkAboutAPPROVED Plast Pro Eval Report 17184.6R W R W Building Consultants, Inc.
BConsulting and Engineering Services for the Building Industry
C P.O. Box 230 Valrico, FL 33595 Phone 813.659.9197
Florida Board of Professional Engineers Registry License No. 9813
Product
Category
Sub Category
Manufacturer
Product Name
Plastpro Inc.
Opaque Fiberglass Double Door
Exterior
Swinging
Exterior Door
5200 W. Century Blvd.
wl or w/out Sidelites
Doors
Assemblies
Los Angeles, CA 90045
Inswing / Outswing
(440) 969-9773
'Impact'
Scope: This is a Product Evaluation report issued by R W Building Consultants, Inc. and Lyndon F. Schmidt, P.E. (System ID #
1998) for Plastpro Inc. based on Rule Chapter No. 61 G20-3, Method 1 D of the State of Florida Product Approval,
Department of Business & Professional Regulation.
RW Building Consultants and Lyndon F. Schmidt, P.E. do not have nor will acquire financial interest in the company
manufacturing or distributing the product or in any other entity involved in the approval process of the product named
herein.
Limitations:
1. This product has been evaluated and is in compliance with the 7th Edition (2020) Florida Building Code (FBC) structural requirements
excluding the "High Velocity Hurricane Zone".
2. Product anchors shall be as listed and spaced as shown on details. Anchor embedment to base material shall be beyond wall dressing
or stucco.
3. When used in areas requiring wind borne debris protection this product complies with FBC Sections 1609.1.2 & R301.2.1.2 and does
not require an impact resistant covering. This product meets missile level "D" and includes Wind Zone 4 as defined in ASTM E1996
and FBC Sections 1609.1.2.2 & R301.2.1.2.1.
4. For 2x stud framing construction, anchoring of these units shall be the same as that shown for 2x buck masonry construction.
5. Site conditions that deviate from the details of drawing FL-17184.6 require further engineering analysis by a licensed engineer or
registered architect.
6. See drawing FL-17184.E for size and design pressure limitations.
Supporting Documents:
1. Test Report No.
Test Standard
Testing Laboratory Signed by
TEL 2004-07-13-016
ASTM E330-02, ASTM E1996/1886-02
Testing Evaluation Lab.,lnc. V.K. Wright
TEL 01390365
TAS 201, 202, 203-94
Testing Evaluation Lab.,lnc. Lyndon F. Schmidt, P.E.
TEL 03851941
ASTM E1886-05/E1996-09
Testing Evaluation Lab.,lnc. V.K. Wright
H1411.01-251-47
ASTM E330-02
Intertek W. Trent Mason
2. Miami Dade NOA
Materials
18-0301.05
Saflex® PVB Interlayers (Eastman Chemical Company)
3. Drawing No.
Prepared by
Signed & Sealed by
No. FL-17184.E
RW Building Consultants, Inc. (#9813)
Lyndon F. Schmidt, P.E.
4. Calculations
Prepared by
eoJjao11°I1##stirOA
�`J� �C . Signed &Sealed by
Anchoring
RW Building Consultants, Inc. (#9813)
: •�\G • ®� Lyndon F. Schmidt, P.E.
5. Quality Assurance
���
• No 4340J
Certificate of Participation issued by National Accreditation and
�• j
Management Institute, certifying that Plastpro Inc. is manufacturing products
within a quality assurance program that complies with ISO/IEC 17020 and
: -0 ' v Lyndon F. Schmidt, P.E.
Guide 53.
;�
OF
��' '• STATE OF e ter o FL PE No. 43409
Sheet 1 of 1
o®��••,�' �, 1)�,,m� 8n/2020
'o � � 1 :•` vro
so�aNr%p�eEoa'►°��
A