HomeMy WebLinkAboutWelder & Welding Qualification Test RecordNDT NON DEf4TRUCTV
A
TESTING, GROUP
8181 Groadmocor St.
Caledonia, MI. `•49316
4i: �fJ;i l
WELDER AND WELDING OPERATOR QUALIFICATION TEST RECORD
WELDING CODE: AWS D1.1 F
Welders Name: Thomas Linton Identification No. TLC 1244
company: Bandy Universal, Inc Welders. Social Security No. 414-04-3548.
Qualification Date: 01/10/13 Witnessed by: Michael, Dobbs
Welding Process (es) SMAW Type Manual
Material Spec ASTM A36
Thickness (If pipe, dia. & wall) 3/8" Plate
Type of backing Steel
Filler Metal E7018
Filler Wire Diameter 1/8"
Uphill
WELDING PROCEDURE WELDING TECHNIQUES
Single /Multiple Pass: Multiple Amps:100-120 Volts:22-24
Single/Multiple ARC: Single , Current: DC Polarity: Reverse
Position of Groove: AG (Overhead) Inches per Min: 9-12.IPM
REDUCED SECTION TENSILE TEST
Specimen No. Dimensions: Width Dimensions: Thickness
Area Ultimate Total Load, LB:
Ultimate Unit Stress, PSI: Character or Failure and Location:
Type and Figure No.
Type and Figure No.
Type and Figure No.
Type and Figure No.
4G Face
4G Root
Weld Appearance:
Macro Etch Test Results:
Fracture Test Results:
Film I.D.
Film I.D.
Film I.D.
Film I.D.
GUIDED BEND TEST
JUL 1.8 2013
Result: Acceptable PERMITTING
�t i.UClp rni in.tg. FL
Result: Acceptable
Result:.
Result:
FILLET TEST RESULTS
Fillet Size:
Position:
RADIOGRAPHIC INSPECTION TEST
Results:
Results:
Results:
Results:
Remarks:
Remarks:
Remarks:
Remarks:
i
The above WELDER�Iby v' of these tests DOES meet welder performance requirements.
Tests Conducted By: Level II .,;�.. Laboratory Test No. NDT4557-IL