HomeMy WebLinkAboutEngineering 398 East Dania Beach Blvd.
100Z BUILDING DROPS Suite338
A Perfect Solution in Every Drop! Dania Beach, FL 33004
Certificate of Authorization:29578 954.399.8478 PH
954.744.4738 FX
contact@buildingdrops.com
Product Evaluation Report
of
Silver Line Building Products
V1 Series/50 Series Gliding Patio Door (5502HV/5702HV)
(HVHZ) (NON-IMPACT)
for
Florida Product Approval
FL# FL20101
Report No. 7301
Current Florida Building Code
Method: 1—A(Certificate)
Category: Exterior Doors
Sub—Category: Sliding Exterior Door Assemblies
Product: V1 Series/50 Series Gliding Patio Door
(5502HV/5702HV)
Material: PVC
Product Dimensions: See Installation Instructions, SWD003
Prepared for:
Silver Line Windows and Doors
One Silverline Dr.
North Brunswick, NJ 08902lip
Prepared by: ••�-� E •s • .
Hermes F. Norero,'P.E. = N 7
Florida Professional Engineer#73778 S A OF
Date: 10/15/2020 Ofi O IpP. ;•��
• �.
Contents: ��s ss' • G�� ��
Evaluation Report Pages 1-3
Digitally signed by Hermes F Norero
Reason:I am approving this document Hermes F. Norero, P.E.
' Date:2020.12.1718:46:45-05'00' Florida P.E. No.73778
i
i
BUILDING DROPS FL#: FL20101
A Perfect Solution in Every Drop! Date: 10/15/20
fi,`, Report No: 7301
Certificate of Authorization:29578
Manufacturer: Silver Line Windows and Doors
Product Category: Exterior Doors
Product Sub-Category: Sliding Exterior Door Assemblies
Compliance Method: State Product Approval Method (1)(a)
Product Name: V1 Series/50 Series Gliding Patio Door(5502HV/5702HV)
(HVHZ)(NON-IMPACT)
Scope: This is a Product Evaluation Report issued by Hermes F. Norero, P.E. (FL#73778)for Silver Line
Windows and Doors based on Method 1a of the State of Florida Product Approval, Florida
Department of Business and Professional Regulation -Florida Building Commission.
Hermes F. Norero, P.E. does not have nor will acquire financial interest in the company
manufacturing or distributing the product or in any other entity involved in the approval process of
the product named herein..
This product has been evaluated for use in locations adhering to the current Florida Building Code.
See Installation Instructions SWD003,signed and sealed by Hermes F. Norero, P.E. (FL#73778)for
specific use parameters.
Limits of Use:
1. This product has been evaluated and is in compliance with the current Florida Building Code,
including the "High Velocity Hurricane Zone" (HVHZ).
2. Product anchors shall be as listed and spaced as shown on details. Anchor embedment into
substrate material shall be beyond wall dressing or stucco.
3. When used in areas requiring wind borne debris protection this product complies with
Chapter 16 of the current Florida Building Code and does require an impact resistant
covering.
4. Site conditions that deviate from the details of Installation Instructions SWD003 require
further engineering analysis by a licensed engineer or registered architect.
5. See Installation Instructions SWD003 for size and design pressure limitations.
Hermes F. Norero, P.E.
Florida P.E. No.73778
Page 2 of 3
BUILDING DROPS FL#: FL20101
A Perfect Solution in Every Drop! Date: 10/15/20Report No: 7301
Certificate of Authorization:29578
Certification Agency: The manufacturer has demonstrated compliance of products in accordance with the
current Florida Building Code for manufacturing under a Certification Agency through
Window and Door Manufacturers Association (FBC Organization#: CER1508).
Performance Standards: The product described herein has been evaluated per:
• AAMA/WDMA/CSA 101/I.S.2/A440-11
• TAS 202-94
Referenced Data:
1. Product Testing performed by Architectural Testing, Inc.
(FBC Organization# TST1558)
Report: Dated:
F3692.01-109-18-RO 02/09/16
TAS Report Signed and Sealed by:Joseph Reed, FL PE 58920
F3692.02-109-44-RO 01/21/16
2. Certification Agency
Window and Door Manufacturers Association
(FBC Organization#: CER1508)
3. PVC profiles meet requirements of WDMA/HallMark WD-61 in accordance
with AAMA 303
Installation Method: Please refer to installation instructions,SWD003,for anchor methods,selection,spacing,
edge distances, embedment's and further details of installation.
Design Pressure: Please refer to installation instructions,SWD003,for mull combination grouping,
configurations, and corresponding design pressures.
1
Hermes F. Norero, P.E.
Florida P.E. No. 73778
Page 3 of 3
i y