HomeMy WebLinkAboutNOANT1Y '.
File COPY
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)
BOARD AND CODE ADMINISTRATION DIVISION
NOTICE OF ACCEPTANCE (NO
MIAMI-DADS COUNTY
PRODUCT CONTROL SECTION
11805 SW 26 Street, Room 208
RECEIVED Miami, Florida 33175-2474
T (786) 315-2590 F (786) 315-2599
B 14 2022w waniamidade.tov/economy
Boral Roofing, LLC, Lucie County
®®�®��fA���.
7575 Irvine Center Drive, Suite 100 &E Permitting
Irvine, CA 92618 ST. L CIE COUNTY
SCOPE: 8 0 C C 9/1 OZ
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami -Dade County RER - Product Control Section to be
used in Miami -Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control Section
(in Miami -Dade County) and/or the AHJ (in areas other than Miami -Dade County) reserve the right to have this product
or material tested for quality assurance purposes. If this product or material fails to perform in the accepted manner, the
manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or suspend the use
of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance, if it is
determined by Miami -Dade County Product Control Section that this product or material fails to meet the requirements
of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Boral Villa 900 Concrete Roof Tile
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for
sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of
this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA renews and revises NOA# 21-0420.02 and consists of pages 1 through 7.
The submitted documentation was reviewed by Alex Tigera.
NOA No.: 21-0712.03
MIAMI•DAD, COUNTY Expiration Date: 09/21/26
Approval Date: 09/16/21
Page 1 of 7
ROOFING ASSEMBLY APPROVAL
Category:
Roofing
Sub Category:
Roofing Tiles
Material:
Concrete
1. SCOPE
This renews a system using Boral Villa 900 Concrete Roof Tile, as manufactured Boral Roofing, LLC in Lake Wales,
FL and described in Section 2 of this Notice of Acceptance. For locations where the pressure requirements, as determined
by applicable Building Code, do not exceed the design pressure values obtained by calculations in compliance with RAS
127 using the values listed in section 4 herein. The attachment calculations shall be done as a moment based system.
2. PRODUCT DESCRIPTION
Manufactured by Test
Product
Applicant Dimensions Specifications
Description
Boral Roofing Villa 900 Length =17" TAS 112
Low profile, interlocking, high pressure extruded
Width =13" Type lb
concrete roof tile equipped with three nail holes
''Y? thick Class III
and double rolls. For direct deck, batten, mortar
or adhesive set applications.
Trim Pieces 1= varies TAS 112
Accessory trim, concrete roof pieces for use at
w = varies
ridges, hips and rakes.
varying thickness
2.1 PRODUCTS MANUFACTURED BY OTHERS
Product Name Product Description
Manufacturer
(With Current NOA)
ICP Adhesives Polysee AH-160 Two component polyurethane
ICP Adhesives and Sealants, Inc.
foam adhesive. .
TILE BOND Roof Tile Adhesive Single component polyurethane DuPont de Nemours, Inc.
foam roof tile adhesive.
"Tile Tite" Roof Tile Mortar Premixed, pre -bagged roof tile
Bermuda Roof Co. Inc.
mortar.
Touch `N Seal StormBone 2 Two- Two component polyurethane
DAP Foam, Inc.
Component Polyurethane Roof Tile foam adhesive.
Adhesive
Touch `N Seal StormBone One One component polyurethane
DAP Foam, Inc.
Component Polyurethane Roof Tile foam adhesive.
Adhesive
2.2 MANUFACTURING LOCATION
2.2.1. Lake Wales, FL
NOA No.: 21-0712.03
Expiration Date: 09/21/26
Approval Date: 09/16/21
Page 2 of 7
2.3 EVIDENCE SUBMITTED
Test Agency
Nutting Engineers
Redland Technologies
The Center for Applied
Engineering, Inc.
Redland Technologies
Test Identifier
Test Name/Report
Date
13343.1
TAS 112
Apr. 2006
7161-03
Static Uplift Testing
Dec. 1991
Appendix III
TAS 102�& TAS 102(A)
7161-03
Wind Tunnel Testing
Dec. 1991
Appendix II
TAS 108 (Nail -On)
P0402
Withdrawal Resistance Testing of
Sept. 1993
screw vs. smooth shank nails
94-060B Static Uplift Testing March, 1994
TAS 101 (Adhesive Set)
94-084 Static Uplift Testing May 1994
TAS 101 (Mortar Set)
P0631-01 Wind Tunnel Testing July 1994
TAS 108 (Mortar Set)
Letter Dated Aug. 1, 1994 Wind Tunnel Testing Aug. 1994
TAS 108 (Nail -On)
The Center for Applied
Project No. 307025
Wind Driven Rain
Oct. 1994
Engineering, Inc.
Test #MDC-76
TAS 100
25-7183-1
Static Uplift Testing
Feb. 1995
25-7183-2
TAS 1 Q2
(2 Quik-Drive Screws, Direct Deck)
25-7214-2
Static Uplift Testing
March, 1995
25-7214-6
TAS 102
(1 Quik-Drive Screw, Direct Deck)
(1 Quik-Drive Screw, Battens)
Celotex Corporation
528454-2-1
Static Uplift Testing
Sep. 1998
Testing Services
520109-2
TAS 101
Dec. 1998
Walker Engineering, Inc.
Evaluation Calculations
254183
March 1995
Evaluation Calculations
25-7094
February 1996
Evaluation Calculations
25-7496
April 1996
Evaluation Calculations
25-7584
December 1996
25-7804b-8
25-7804-4 & 5
25-7848-6
Evaluation Calculations
Aerodynamic Multipliers
09/01/16
Evaluation Calculations
Two Patty Adhesive Set System
April 1999
Evaluation Calculations
Restoring Moment Due to Gravity
09/01/16
American Test Lab of South
RT0617.02-16
TAS 112
06/29/16
Florida
RT0503.02-21
TAS 112
05/12/21
NOA No.: 21-0712.03
Expiration Date: 09/21/26
Approval Date: 09/16/21
Page 3 of 7
PRI Construction Materials COPO-002-02-11 Static Uplift Testing 10/12/2016
Technologies TAS 101 (Adhesive Set)
COPO-002-02-04 Static Uplift Testing 10/12/2016
TAS 101 (Adhesive Set)
COPO-002-02-03 Static Uplift Testing 10/12/2016
TAS 101 (Adhesive Set)
2002T003.02 TAS 101 11/06/20
NEMO ETC, LLC 4c-DPBS-20-LSOTM-0l.C.R1 TAS 101 12/17/20
3. LIMITATIONS:
3.1 Fire classification is not part of this acceptance.
3.2 For mortar or adhesive set tile applications, a static field uplift test shall be performed in accordance with TAS
106.
3.3 Applicant shall retain the services of a Miami -Dade County Certified Laboratory to perform quarterly test in
accordance with TAS 112, appendix `A'. Such testing shall be submitted to the Building Code Compliance Office
for review.
3.4 Minimum underlayment shall be in compliance with the applicable Roofing Applications Standards listed section
4.1 herein.
3.5 30/90 hot mopped underlayment applications may be installed perpendicular to the roof slope unless stated
otherwise by the underlayment material manufacturers published literature.
3.6 This acceptance is for wood deck applications. Minimum deck requirements shall be in compliance with applicable
building code.
4. INSTALLATION
4.1 Villa 900 Concrete Roof Tile and its components shall be installed in strict compliance with Roofing Application
Standard RAS 118, RAS 119, and RAS 120.
4.2 Data For Attachment Calculations
Table 1: Average Weight (W) and Dimensions (I x w )
Tile Profile
Weight W (Ibf)
Length -I (ft)
Width-w (ft)
Villa 900 Concrete Tile
10.90
1.42
1.08
Table 2: Aerodynamic Multipliers - I (ft3)
Tile Profile
2L (ft3)
Batten Application
, 2L (ft3)
Direct Deck Application
Villa 900 Concrete Tile
0.291
0.315
NOA No.: 21-0712.03
MIAMI•DAD; COUNTY Expiration Date: 09/21/26
Approval Date: 09/16/21
Page 4 of 7
Table 3: Restoring Moments due to Gravity - M9 ft-lbf.)
Tile Profile
2":12"
3":12"
4":12"
5":12"
6":12"
7":12" or greater
Villa 900
Concrete Tile
Direct
Deck
Direct
Deck
Battens
Direct
Deck
Battens
Direct
Deck
Battens
Direct
Deck
Battens
Direct
Deck
7.70
7.62
6.56
7.50
6.42
7.34
6.26
7.15
6.08
6.95
Table 4: Attachment Resistance Expressed as a Moment - Mf (ft-lbf)
for Mechanically Fastened Systems
Tile Profile
Fastener Type
Direct Deck
Direct Deck
Battens
(min 15/32" plywood)
(min.19/32" plywood)
Villa 900
2-10d Ring Shank Nails
27.8
37.4
28.8
Concrete Tile
1-10d Smooth or Screw
8.8
11.8
4.1
Shank Nail
2-10d Smooth or Screw
16.4
21.9
7.1
Shank Nails
1 #8 Screw
25.8
25.8
22.9
2 #8 Screw
47.1
47.1
49.1
1-10d Smooth or Screw
24.3
24.3
24.2
Shank Nail Field Clip)
1-10d Smooth or Screw
19.0
19.0
22.1
Shank Nail (Eave. Clip)
2-10d Smooth or Screw
35.5
35.5
34.8
Shank Nails Field Clip)
2-10d Smooth or Screw
31.9
31.9
32.2
Shank Nails Eave Clip)
Table 5: Attachment Resistance Expressed as a Moment Mf (ft-lbf)
for Two Paddy Adhesive' Set Systems
Tile Profile
Tile Application
Minimum Attachment
Resistance
Villa 900 Concrete Tile
TILE BONDTm Roof Tile Adhesive
352
TILE BONDTm Roof Tile Adhesive
673
ICP Adhesives Pol set® AH-160
26.14
Touch'N Seal StormBond®2
555
Touch 'N Seal StormBond® (one component)
- 726
1 See foam adhesive manufacturer's component approval for installation requirements.
2 Medium paddy weight of 8 grams per paddy of TILE BONDTm Roof Tile Adhesive
3 Medium paddy weight of 16 grams per paddy of TILE BONDTm Roof Tile Adhesive
4 Medium paddy weight of 8 grams per paddy of Polyset® AH-160
5 Medium paddy weight of 8 grams per paddy of Touch 'N Seal StormBond ® 2
6 Medium paddy weight of 8 grams between tile and underlayment, paddy weight of 5 grams on overlap of the of
Touch 'N Seal StormBond ® one component)
MAMI•DADE COUNTY
, yme
NOA No.: 21-0712.03
Expiration Date: 09/21/26
Approval Date: 09/16/21
Page 5 of 7
Table 6: Attachment Resistance Expressed as a Moment - Mf (ft-lbf)
for Single Paddy Adhesive Set Systems
Tile
Tile Application
Minimum Attachment
Profile,
Resistance
Villa 900 Concrete Tile
LC
86,67
ICP Adhesives Pol set® AH-160
45.58
ouch'N Seal StormBondw2
409
Touch 'N Seal StormBond®2
7010
7 Large paddy weight of 54 grams of Polyset0 AH-160
8 Medium paddy weight of 24 grams of Polyset® AH-160
9 Medium paddy weight of 30 grams of Touch 'N Seal StormBond ® 2
10 Large paddy weight of 60 grams of Touch 'N Seal StormBond ® 2
Table 7: Attachment Resistance Expressed as a Moment - Mf (ft-lbf)
for Mortar Set Systems
Tile
Profile
Tile
Application
Attachment
Resistance
Villa 900 Concrete Tile
Mortar Set"
20.6
11 Bermuda Roof Co. Inc. Tile-Tite Roof Tile Mortar.
5. LABELING
5.1 All tiles shall bear the imprint or identifiable marking of the manufacturer's name or logo as detailed below,
or following statement: "Miami -Dade County Product Control Approved".
LABEL FOR BORAL VILLA 900 CONCRETE TILE
(LOCATED ON THE UNDERSIDE OF TILE
6. BUILDING PERMIT REQUIREMENTS:
6:1 Application for building permit shall be accompanied by copies of 11
the following:
6.1.1 This Notice of Acceptance.
6.1.2 Any other documents required by Building Official or Applicable building code in order to properly
evaluate the installation of this system.
NOA No.: 21-0712.03
Expiration Date: 09/21/26
Approval Date: 09/16/21
Page 6 of 7
Villa
Nail hales
iT'
PROFILE DRAWING
L12
VILLA 900 CONCRETE ROOF TILE
END OF THIS ACCEPTANCE
Overlock
13"
21 /8"
1
NOA No.: 21-0712.03
Expiration Date: 09/21/26
Approval Date: 09/16/21
Page 7 of 7