HomeMy WebLinkAboutAPPROVED REVISION 3,bldg dept_ revisions R5_ signedFL Design Build Inspect CRC1331263|AA26003142|HI10776
Architecture + Construction + Home Inspection 772.321.4500 | frank.liebler@gmail.com
BLDG DEPT CORRESPONDENCE | 1 of 1
3/10/22
To: St Lucie County Building Dept
Re: permit # 2106-0466
See revisions below.
1. The window and sliding door products have changed, see attached revised product approval affidavit.
Thank you,
Frank Liebler
Owner / Architect / Contractor
FL Design Build Inspect
Construction + Architecture + Home Inspection
CRC1331263 | AA26003142 | HI10776
frank.liebler@gmail.com
c 772.321.4500
DocuSign Envelope ID: 4B0EDB43-E3A1-4370-94F6-31CB5C4DB6BF
3/10/2022
ITEM TYPE ID 1BUILDING DP 2PRODUCT DPGLASS TYPE 5MFR MODEL APPROVAL # FASTNERS 6DOORS. SWINGD1 50,‐50 IMPACT ThermaTru ANY FL 20468.5DOORS. SWINGD2,4 75,‐75 IMPACT PGT FD‐101 FL 253.1DOORSGDD3 60, ‐60 IMPACT CGI 150 NOA 20‐0729.06WINDOWS. HUNGALL 75,‐75 IMPACT CGI 110 NOA 20‐0722.09ROOFINGMETALALL‐47.7 field, ‐65.8 edge‐59.7 field, ‐101.0 edgeN/A JA Taylor EDGE LOC NOA 18‐1023.17Field: screw @ 16" oc along rib. Edge: screw @ 6.75" oc along rib within 4' of edges/ridgesFRANK LIEBLER, ARCHITECT (AR97108)PRODUCT APPROVAL AFFIDAVIT1. 'ID' as per door & window schedule, or all meaning worst case of all similar items of that type.2. If building dp are left blank‐ see door & window schedule or design pressure chart.3. This affidavit is only to verify product's compliance with wind loads.4. Unless products are specifically submitted for verification by contractor, they are assumed.5. If glass type is not specified more than 'impact', may use any of the impact glass type in the install instructions to achieve the stated building design pressures.6. If fasteners is left blank, may use any of the specified attachment methods in the install instruction matching structure provided to achieve the stated building design pressures.7. I have reviewed the above components or cladding and I have approved their use in this structure. These products provide adequate resistance to the wind loads and forces specified by current code provisions.DocuSign Envelope ID: 4B0EDB43-E3A1-4370-94F6-31CB5C4DB6BF3/10/2022