Loading...
HomeMy WebLinkAboutNOA - FIXED WINDOWS NOA No. 21-0708.03 Expiration Date: May 18, 2022 Approval Date: September 02, 2021 8/20/21 Page 1 MIAMI-DADE COUNTY PRODUCT CONTROL SECTION 11805 SW 26 Street, Room 208 DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) Miami, Florida 33175-2474 BOARD AND CODE ADMINISTRATION DIVISION T (786) 315-2590 F (786) 315-2599 NOTICE OF ACCEPTANCE (NOA) www.miamidade.gov/building E.S. Windows, LLC 3550 NW 49th Street Miami, FL 33142 SCOPE: This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The documentation submitted has been reviewed and accepted by Miami–Dade County RER– Product Control Section to be used in Miami–Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ). This NOA shall not be valid after the expiration date stated below. The Miami–Dade County Product Control Section (In Miami–Dade County) and/ or the AHJ (in areas other than Miami–Dade County) reserve the right to have this product or material tested for quality assurance purposes. If this product or material fails to perform in the accepted manner, the manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance if it is determined by Miami–Dade County Product Control Section that this product or material fails to meet the requirements of the applicable building code. This product is approved as described herein and has been designed to comply with the Florida Building Code, including the High Velocity Hurricane Zone. DESCRIPTION: Series “EL-150” Aluminum Fixed Window – L.M.I. APPROVAL DOCUMENT: Drawing No. W16-70, titled “ES-EL150 Fixed Aluminum Wdw. (L.M.I)”, sheets 1, 2, 2.1, 3, 3.1, 4 and 5 through 9 of 9, dated 11/13/16, with revision D dated 06/12/21, prepared by Al– Farooq Corporation, signed and sealed by Jalal Farooq, P.E., bearing the Miami–Dade County Product Control Revision stamp with the Notice of Acceptance number and expiration date by the Miami–Dade County Product Control Section. MISSILE IMPACT RATING: Large and Small Missile Impact Resistant LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, Barranquilla, Colombia, model/series, and following statement: "Miami–Dade County Product Control Approved", unless otherwise noted herein. RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change in the applicable building code negatively affecting the performance of this product. TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the materials, use, and/ or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of this NOA shall be cause for termination and removal of NOA. ADVERTISEMENT: The NOA number preceded by the words Miami–Dade County, Florida, and followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done in its entirety. INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and shall be available for inspection at the job site at the request of the Building Official. This NOA revises NOA No. 20-1223.01 and consists of this page 1 and evidence pages E-1, E-2, E-3 and E-4, as well as approval document mentioned above. The submitted documentation was reviewed by Manuel Perez, P.E. Manuel Perez, P.E. Product Control Examiner NOA No. 21-0708.03 Expiration Date: May 18, 2022 Approval Date: September 02, 2021 E – 1 E.S. Windows, LLC NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED 1. EVIDENCE SUBMITTED UNDER PREVIOUS NOA’s A. DRAWINGS 1. Manufacturer's die drawings and sections. (Submitted under NOA No. 16-0617.05) 2. Drawing No. W16-70, titled “ES-EL150 Fixed Aluminum Wdw. (L.M.I)”, sheets 1, 2, 2.1, 3, 3.1, 4 and 5 through 9 of 9, dated 11/13/16, with revision C dated 06/22/20, prepared by Al-Farooq Corporation, signed and sealed by Jalal Farooq, P.E. (Submitted under NOA No. 20-1223.01) B. TESTS 1. Test reports on: 1) Air Infiltration Test, per FBC, TAS 202-94 2) Uniform Static Air Pressure Test, Loading per FBC, TAS 202-94 3) Water Resistance Test, per FBC, TAS 202-94 4) Large Missile Impact Test per FBC, TAS 201-94 5) Cyclic Wind Pressure Loading per FBC, TAS 203-94 6) Safety Performance Test, (class A) per ANSI Z97.1 along with marked-up drawings and installation diagram of a series EL-150 aluminum fixed window, prepared by Fenestration Testing Laboratory, Inc., Test Report No. FTL-12002, dated 04/30/20, signed and sealed by Idalmis Ortega, P.E.. (Submitted under NOA No. 20-1223.01) 2. Test reports on: 1) Air Infiltration Test, per FBC, TAS 202-94 2) Uniform Static Air Pressure Test, Loading per FBC, TAS 202-94 3) Water Resistance Test, per FBC, TAS 202-94 4) Large Missile Impact Test per FBC, TAS 201-94 5) Cyclic Wind Pressure Loading per FBC, TAS 203-94 6) Safety Performance Test, (class A) per ANSI Z97.1 along with marked-up drawings and installation diagram of a series EL-150 aluminum fixed window, prepared by Fenestration Testing Laboratory, Inc., Test Report No. FTL-11035, dated 04/30/20, signed and sealed by Idalmis Ortega, P.E. (Submitted under NOA No. 20-1223.01) 3. Test reports on: 1) Air Infiltration Test, per FBC, TAS 202-94 2) Uniform Static Air Pressure Test, Loading per FBC, TAS 202-94 3) Water Resistance Test, per FBC, TAS 202-94 4) Large Missile Impact Test per FBC, TAS 201-94 5) Cyclic Wind Pressure Loading per FBC, TAS 203-94 6) Safety Performance Test, (class A) per ANSI Z97.1 along with marked-up drawings and installation diagram of a series EL-150 aluminum fixed window, prepared by Fenestration Testing Laboratory, Inc., Test Report No. FTL-11027, dated 04/23/20, signed and sealed by Idalmis Ortega, P.E. (Submitted under NOA No. 20-1223.01) Manuel Perez, P.E. Product Control Examiner NOA No. 21-0708.03 Expiration Date: May 18, 2022 Approval Date: September 02, 2021 E – 2 E.S. Windows, LLC NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED 1. EVIDENCE SUBMITTED UNDER PREVIOUS NOA’s (CONTINUED) B. TESTS (CONTINUED) 4. Test reports on: 1) Air Infiltration Test, per FBC, TAS 202–94 2) Uniform Static Air Pressure Test, Loading per FBC, TAS 202-94 3) Water Resistance Test, per FBC, TAS 202-94 along with marked–up drawings and installation diagram of aluminum fixed window, prepared by Blackwater Testing, Inc., Test Report No. BT-ESW-16-004, dated 11/14/16, and revised on 05/10/17, signed and sealed by Constantin Bortes, P.E. (Submitted under NOA No. 16-0617.05) 5. Test reports on: 1) Large Missile Impact Test per FBC, TAS 201-94 2) Cyclic Wind Pressure Loading per FBC, TAS 203-94 along with marked–up drawings and installation diagram of aluminum fixed window, prepared by Blackwater Testing, Inc., Test Report No. BT-ESW-17-012, dated 05/10/17, signed and sealed by Constantin Bortes, P.E. (Submitted under NOA No. 16-0617.05) C. CALCULATIONS 1. Anchor verification calculations and structural analysis, complying with FBC 5th Edition (2014), dated 11/16/16, revised on 12/21/16, and updated on 11/09/20 to comply with FBC 7th Edition (2020), prepared by Al-Farooq Corporation, signed and sealed by Jalal Farooq, P.E. 2. Glazing complies with ASTM E1300-09 D. QUALITY ASSURANCE 1. Miami-Dade Department of Regulatory and Economic Resources (RER) E. MATERIAL CERTIFICATIONS 1. Notice of Acceptance No. 19-0305.02 issued to Kuraray America, Inc. for their “Trosifol® Ultraclear, Clear and Color PVB Glass Interlayers” dated 05/09/19, expiring on 07/08/24. 2. Notice of Acceptance No. 18-0725.11 issued to Kuraray America, Inc. for their “Kuraray SentryGlas® XtraTM (SGXTM) Clear Glass Interlayer” dated 05/23/19, expiring on 05/23/24. 3. Notice of Acceptance No. 20-0622.03 issued to Eastman Chemical Company (MA) for their “Saflex Storm - Saflex and Saflex HP Composite Glass Interlayers with PET Core” dated 08/06/20, expiring on 12/11/23. 4. Notice of Acceptance No. 20-0622.02 issued to Eastman Chemical Company (MA) for their “Saflex HP Clear or Color Glass Interlayers” dated 08/06/20, expiring on 04/14/23. Manuel Perez, P.E. Product Control Examiner NOA No. 21-0708.03 Expiration Date: May 18, 2022 Approval Date: September 02, 2021 E – 3 E.S. Windows, LLC NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED 1. EVIDENCE SUBMITTED UNDER PREVIOUS NOA’s (CONTINUED) F. STATEMENTS 1. Statement letter of conformance, complying with FBC 6th Edition (2017), with FBC 7th Edition (2020), and of no financial interest, dated November 09, 2020, issued by Al- Farooq Corporation, signed and sealed by Jalal Farooq, P.E. (Submitted under NOA No. 20-1223.01) 2. Proposal No. 18-0784 issued by the Product Control Section, dated June 29, 2018, signed by Manuel Perez, P.E. (Submitted under NOA No. 20-1223.01) 3. Proposal No. 19-1230 issued by the Product Control Section, dated November 18, 2019, signed by Manuel Perez, P.E. (Submitted under NOA No. 20-1223.01) G. OTHERS 1. Notice of Acceptance No. 17-1218.12, issued to ES Windows, LLC, for their Series “EL-150” Aluminum Single Fixed Window – L.M.I., approved on 02/08/18 and expiring on 05/18/22. Manuel Perez, P.E. Product Control Examiner NOA No. 21-0708.03 Expiration Date: May 18, 2022 Approval Date: September 02, 2021 E - 4 E.S. Windows, LLC NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED 2. NEW EVIDENCE SUBMITTED A. DRAWINGS 1. Drawing No. W16-70, titled “ES-EL150 Fixed Aluminum Wdw. (L.M.I)”, sheets 1, 2, 2.1, 3, 3.1, 4 and 5 through 9 of 9, dated 11/13/16, with revision D dated 06/15/21, prepared by Al-Farooq Corporation, signed and sealed by Jalal Farooq, P.E. B. TESTS 1. None. C. CALCULATIONS 1. Anchor verification calculations and structural analysis, complying with FBC 5th Edition (2014), dated 11/16/16, revised on 12/21/16, updated on 11/09/20 to comply with FBC 7th Edition (2020) and further revised on 06/29/21 to include additional window sizes, prepared by Al-Farooq Corporation, signed and sealed by Jalal Farooq, P.E. 2. Glazing complies with ASTM E1300-09 D. QUALITY ASSURANCE 1. Miami-Dade Department of Regulatory and Economic Resources (RER) E. MATERIAL CERTIFICATIONS 1. Notice of Acceptance No. 20-0915.22 issued to Kuraray America, Inc. for their “Trosifol® Ultraclear, Clear and Color PVB Glass Interlayers” dated 11/19/20, expiring on 07/08/24. 2. Notice of Acceptance No. 20-0915.19 issued to Kuraray America, Inc. for their “SentryGlas® (Clear and White) Glass Interlayers” dated 11/19/20, expiring on 07/04/23. 3. Notice of Acceptance No. 20-0622.03 issued to Eastman Chemical Company (MA) for their “Saflex Storm - Saflex and Saflex HP Composite Glass Interlayers with PET Core” dated 08/06/20, expiring on 12/11/23. 4. Notice of Acceptance No. 20-0622.02 issued to Eastman Chemical Company (MA) for their “Saflex HP Clear or Color Glass Interlayers” dated 08/06/20, expiring on 04/14/23. F. STATEMENTS 1. Statement letter of conformance, complying with FBC 7th Edition (2020) dated June 25, 2021, issued by Al-Farooq Corporation, signed and sealed by Jalal Farooq, P.E. G. OTHERS 1. Notice of Acceptance No. 20-1223.01, issued to E.S. Windows, LLC, for their Series “EL-150” Aluminum Fixed Windows – L.M.I., approved on 04/22/21 and expiring on 05/18/22.