Loading...
HomeMy WebLinkAboutDOCUMENTS REQUEST• Please submit the elevation of the invert for the septic system. This is required for determination of the elevation and requirements for storm water. See section 107 of the 2014 Florida building code, and section 7.04.01(D) of the land development code. • Please submit the elevation of the occupied and adjacent properties. This is required for determination of the elevation and requirements for storm water. See section 107 of the 2014 Florida building code, and section 7.04.01(D) of the land development code. Structure is located in an ae-6 flood zone. Please specify the lowest floor elevation on the survey. See section 107 of the 2014 Florida building code. structure is located in an ae-6 flood zone please put on the plans the elevation of the lowest part of the garage floor. see section 107 of the 2014 florida building code. please see plan page c1 design criteria, exposure is incorrect. please see R301.2.1.4.2 of the 2014 florida residential building code. could not complete my review of the opening design pressures on the product review affidavit due to the expose category being incorrect. please see section 107 of the 2014 florida building code. could not complete my review of the opening design pressures on the certificate for design load compliance due to the expose category being incorrect. please see section 107 of the 2014 florida building code. • No Product approval number was submitted for the roofing underlayment. Please submit the correct product approval number on plans or submit the product approval in duplicate. SEE CHAPTER 1 SECTION 107 OF THE 2014. • INSULATION R-VALUES STATED ON THE ENERGY CALC'S DO NOT MATCH THE SUBMITTED DRAWINGS FOR REVIEW. SEE CHAPTER 4 SECTION 402 SUBSECTION 402.1.2 OF THE 2014 FLORIDA ENERGY CODE. WORST CASE MARKED YES ON THE ENERGY CALC'S. HOUSE DOES NOT MEET THE REQUIREMENTS FOR THE USE OF THE EXCEPTION. PLEASE CHECK THE ORIENTATION OF THE HOUSE FOR THE WALLS, WINDOWS AND DOORS. SEE SECTION 405.4.2 EXCEPTIONS. • PLEASE ADD THE CUBIC VOLUME OF THE CONDITIONED SPACE TO INFORMATION BLOCK CONTAINING THE SQUARE FOOT INFORMATION. SEE CHAPTER 1 SECTION 107 OF THE 2014 FLORIDA BUILDING CODE.