HomeMy WebLinkAboutPOOL FENCE SYSTEM�'U, r J� • F , _ _ yy ryp _ i
LIFE SAVER POOL FENCE SYSTEM SPECIFICATIONS
General Description:
Pool fence designed specifically to provide a barrier around residential swimming pools
for toddlers and young children. Life Saver Pool Fence Systems ® does not have any
gaps, openings, indentations, protrusions, or structural components that could allow a
child to crawl under, squeeze through, or climb over the barrier. Our Perma Locking
System" will not allow the barrier to be removed without the aid of tools.
Life Saver Pool fence is manufactured and installed in compliance with the Florida
Statutes, Florida Building Code R 4501.17.1, FBC/R 4502.17.1 , and ASTM D5034,
ASTM D3787, ASTM G 53
System:
Tension based system utilizing a series of 15 foot sections of fence with inserts for
mounting in non -conducting polypropylene sleeves core drilled 4 inches deep into a
concrete deck or other substantial surface, connected in series at the top with a
spring loaded safety latch. One end of barrier requires tool to remove it. Non
removal end secured to fence post and pool deck by a 1" L Brace for 360
applications. Non removal end secured by spring Perma Lock" with nut/bolt in
screen enclosure applications.
Construction:
Mesh: Polyester mesh fabric with a mildew resistant polyvinyl coating to provide for
years of use in direct sunlight. Continuous basket weave with a tensile strength
rating of 270 lbs. per inch making it impossible to rip under normal use.
Color selection is black, white, green or brown. Available in 48 or 60 in.heights.
Bordered on all four sides by a reinforced vinyl material with a rating of 387
lbs. to prevent sagging providing the necessary tension to insure the fence's
integrity. Marine Grade Stitching secures border to mesh. The mesh is pre -
mounted on aluminum support poles and secured by aluminum cove molding
strips.
Poles: Reinforced 6063T6 1" Aluminum Poles are spaced no more than 36" apart.
Temper rating of T6 scores the highest tensile strength (30ksi) within the 6063
alloy classification. Pole 'resistance to lateral pressure exceeds 70 lbs. of
pressure before failure on any single pole in a free standing installation, thus
exceeding the 52 lbs. of horizontal force prescribed by the Florida Building
Code. Stainless steel roundhead screws (14) are utilized for securely attaching
the aluminum cove molding to the poles and mesh. Surface of the poles are
finished for handling and to prevent injuries from physical contact. Color
options: black, white, green, tan, brown, bronze or silver finish.
The poles are capped to provide a neat finished appearance.
--- Revised 11/10/16
Life Saver Pool Fence Systems, stems Inc.
y ,
Removable Pool Safety Mesh Barrier Fencing Technical Specifications
Life Saver Pool Fence Systems, Inc. has manufactured removable pool safety fencing
for over 13 years and has continuously evolved their methods and materials, often -time
leading industry wide changes. A Manufacturer's Limited Lifetime Warranty guarantees
every system for as long as they own it. Life Saver Pool Fence meets and exceeds all
code requirements throughout Florida. Below you will find technical specifications on the
components used in assembling the Life Saver Pool Fence.
Textilene Mesh
Textilene mesh has been used as the highest quality material to the pool fence industry
for over 15 years. Laboratory testing shows its strengths to surpass all code specifications
and applicable ASTM standards.
Item Number:
T70 DFS
Product Description:
Fabric using .025" dia. vinyl -coated 1000 den. polyester core yarns in the warp
and fill.
Construction, end/inch
D3775-96
Weight, oz/yd2
D3776-96
Tensile Strength (grab), Ibf
D5034-95
Tensile Strength (strip), Ibf
D5035-95
Tear Strength, (Trapezodial), Ibf
D1117-97
Ball Burst, Ibf
D3787-89
Bursting Strength, psi
D3786-89
Elongation, %
D5035-95
Abrasion Resistance
D3884-92
(CS10/500 cycles/ with no added weight)
Flammability Rating
Weatherability, 1200 hours G53-96
Mildew Resistance G21-96
13.0 ± .5
221.4
194.9
65.4
24.3
** The above results are a representative of real data from single test samples.
Presently no specification is incorporated.
11.0 ± .5
213.3
153.8
54.0
335
433
21.6
No exposure of core yarn
CS-191-53 & CA 117E
No discoloration
No growth
Warp refers to the horizontal threading while fill refers to the vertical threading. As
shown, all testing confirms Textilene mesh meets and, on all strength tests, amply
exceeds the set code requirements.
PENTAIR
iCHLORT"
SALT CHLORINE G'€RAIQR
MODEL iCHLOR 1 , iCHLOR 30
INSTALLATION AND
USER'S GUIDE
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
KEEP OUT OF REACH OF CHILDREN
PENITAIR
GENERAL INFORMATION
Salt Chlorine Generator (SCG) Overview
The iChlofrm Salt Chlorine Generator (SCG) uses a process known as electrolysis to produce chlorine gas which
immediately dissolves into a solution to create Hypochlorite and Hypochlorous acid (a pool and spa water
sanitizer) from a low concentration of salt added to the pool water. Hypochlorite and Hypochlorous kill bacteria,
oxidizes organic material, and kills algae, then reverts back to salt. The iChlor then reuses the salt and the process
starts over again. The iChlor residential system is comprised of the iChlor cell and Power Center.
® AR iNG Salt is an inherently corrosive material. While the levels of salt required for proper operation
of the iChlor SCG are relatively low when compared to sea water and other salt solutions,
placing any amount of salt in your pool increases the likelihood of corrosion or other deterioration of pool
equipment and any surfaces used in and around your pool. Metal parts (including steel pools) and certain
natural and man-made surfaces are particularly susceptible to corrosion and deterioration when used in and
around salt water pools. Pentair Water Pool and Spa, Inc. ("Pentair") does not represent or otherwise guarantee
that the proper use of the iChlor SCG will prevent corrosion or other deterioration of pool equipment and any
surfaces used in and around your pool. Consult your experienced pool professional, who should be able to
advise you on the proper material selection, installation techniques for those materials, and the proper use, care
and maintenance of those materials for your specific pool type and location in order to minimize the corrosion
and deterioration that is inherent in and around salt water pools.
ACAUTION The iChlor SCG is designed only to produce chlorine. The iChlor SCG does not monitor
or control chlorine levels in the pool or spa water. It is the pool owner's responsibility for
monitoring and maintaining free chlorine levels at the APSP recommended range of 2.0 to 4.0 parts per million
(ppm). It is the pool owner's responsibility to check, on a regular basis, the free chlorine level while the pool
pump is running, and adjust the iChlor SCG accordingly.
/,CAUTION FOR ALL NEWLY CONSTRUCTED OR RESURFACED PLASTER POOLS: Do not
operate the iChlor SCG with newly poured or resurfaced pool plaster. Salt is a
corrosive element and severe salt damage can occur to your pool. Wait at least ONE (1) MONTH after
construction to allow plaster to cure before adding salt and operating iChlor SCG. Follow the pool
surface manufacturer's guidelines for your specific pool. FOR NEW VINYL LINER POOLS, contact the
manufacturer for recommended guidelines before adding salt and operating the iChlor SCG.
iChlor SCG Models
An iChlor Salt Chlorine Generator system consists of one or more of the following. Note: The output rating for the
different iChlor models is listed in the table below. These output ratings are based on 24 hours of run time.
Pool Size: US
Chlorine Produced
Model
Gal. (Liter)
Lbs. (Kg.) Per 24
Hour
iChlor 15
15,000 (781)
0.60 (0.27)
iChlor 30
30,000 (114)
1.0 (0.45)
• PC100 (P/N 520556): Power Center provides
power and controls communication to and from the
iChlor cell.
• Can be used for IC 15, IC20, IC40, IC60, iChlor 15
and iChlor 30 SCG cells.
iChlor "pass -through" Cell (P/N 522965): For new
pool start-up .
iCHLORTM Salt Chlorine Generator Installation and User's Guide
https://www.pentairpool.com/en/products/pumps/intelliflo%20variable%20speed%20high%20perfomance%20pump 2/11/18, 2:04 PM
Page 3 of 4