HomeMy WebLinkAboutPRODUCT APPROVAL ROOFING UNDERLAYMENTS1/4/2018 - Florida Building Code Online
n+-vwr ry ui �� A4m•�M � hry33:... ....." y t .-.rn. M'��� ,.,
FF 7aaffff ,4 K^Fill.. •'��hb�Yq �` '�Vt " y '+'. 1 � � .�—„e
`o �.Affl,
O i ii ry/ t"V't� p AFL WANN�
sIlk1L"
x.s BYr rz =*
BCIS Home Log In User Reglstratlon Hot Topics Subrfiii�fSitY�P7� aftPublications FBC Stall BCIS Site Map Links Se
I
Product Approval
USER: Public User
d r
Product Approval Menu > Product or Aooltcatfon Search > > ApplleaUo tall
FL#
Application Type
Code Version
Application Status
Comments
Archived
Product Manufacturer
Address/Phone/Email
Authorized Signature
Technical Representative
Address/Phone/Email
Quality Assurance Representative
Address/Phone/Small
Category
Subcategory
Compliance Method
FL24483
New
2017
ERECEIVEfi
*Appdved by DBPR. Approvals by DBPR shall be reviewed and ratified
POC and/or the Commission if necessary.
F:—
Tampa,. LUCIE COUPd�
ILDING DIVISION
� F�
@.9' ��"Gardner Asphalt Corp. er
o-----�,4161 E. 7th Avenue FL 33605NS AND I'EF MIT(813) 248-2101 Ext 114E KEPT ON JO,FJ OFI
mmulllns@gardner-gibsonCY'lord V(linla 0p41 1,pE
dan white
dwhite@gardner-gibsoly[TT k) r�
A!IL ti!1ilf;l�T
KIMITY V1111 au,
/'�4�1�1,!L'/�>
CONCEALED FASTENERS OR ATTACHMENTS
Roofing Underlayments ARE THE RESPONSIBILITY OF THE
Certification Mark or ListingCONTRACTOR OFRECOPX
IP
Certification Agency Miami -Dade BCCO - CER �ILE
Validated By Miami -Dade BCCO - VAL C(,j
i
I
Referenced Standard and Year (of Standard)
i
Equivalence of Product Standards
Certified By
Standard
ASTM D 1970
ASTM D 226
TAS 103
Approved Certification Agency
Approved Evaluation Entity
FL24483 RO Eauiv 7 Eauivalencv�p rodf
FL24483 RO Eauiv 1704
[ear
2015
2009
1995
An..-.g..n mm r_FVXrAWnnuitL.uE1oYFLLV5BinE9BpaiCP9MI28pTOr2U91%2bsL1Qw%3d%3d 1/4
1/4/2018
Product Approval
Date Submitted
Date Validated
Date Pending FBC Approval
Date Approved
Cuinieary of Products
Florida Building Code Online
Method 1 Option A
11/17/2017
11/22/2017
11/30/2017
i
FL # I
Model, Number or Name
Description
24483.1 I
APOC Tuff -Felt 26
Asphalt Saturated Felt underlayment, 2 square #30
Limits of Use
HVHZ:
Certification Agency Certificate
Approved for use in Yes
Approved for use outside HVHZ: Yes
FL24483 go C CAC 704 7-1 odf
Quality Assurance Contract Expiration Date
Impact Resistant: N/A
03/28/2018
Design Pressure: N/A
installation Instructions
Other:
Fi 24483 RO II 17042710.odf
Verified By: Miami -Dade BCCO - CER
Created by Independent Third Party:
Evaluation Reports
1.
Created by Independent Third Party:
24483.2
APOC Tuff -Felt 46
Asphalt Saturated Felt underlayment, 4 square #15.
Limits of Use I
Certification Agency Certificate
Approved for use in HVHZ: Yes
Approved for use outside HVHZ: Yes
FL?4483 RO C CAC 17042710 odP
QualityAssurance Contract Expiration Date
Impact Resistant: N/A
Design Pressure: N/A
03/28/2018
Installation Instructions
Other:
FL24483 RO II 17042710.odf
Verified By: Miami -Dade BCCO - CER
Created by Independent Third Party•
Evaluation Reports
i
Gatoikin
Synthetic roof underlayment comprised of layers of poly' le
C4483.3
film.
a ca rtiflcate
FI 24483 RO C CAC 17042710.odf
Approved for use in HVHZ: Yes
Approved for use outside HVHZ: Yes '
Quality Assurance Contract Expiration Date
Impact Resistant: N/A
03/28/2018
installation Instructions
Design Pressure: N/A
FL24483 RO II 17042710.Ddf
Other:
Verified By: Miami -Dade BCCO - CER
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party:
i
24483.4 United F6UR30
Asphalt Saturated Felt underlayment, 4 square #15
Limits of Use Certification Agency Certificate
C CAC 17042710.odf
4483 RO
Approved for use in HVHZ: Yes QualityAssurance Contract Expiration Date
Approved for use outside HVHZ: Yes
Impact Resistant: N/A 03/2018
Installation Instructions
Design Pressure: N/A
FL24483 RO II 17042710 odf
Other:
Verified By: Mlami-Dade BCCO - CER
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party:
24483.5 __ United FGUR20 _ Asphalt Saturated Felt underlayment, 2 square #30.
_
Limits of Use v Certification Agency Certificate
Approved for use In HVHZ: Yes FL24483 RO C CAC 17047710.&df
Quality Assurance Contract Expiration Date
Approved for use Outside HVHZ: Yes
03/28/2018
Impact Resistant: N/A
installation Instructions
Pressure: N/A
Design P
FL24483 RO II 17042710odf
Other:
Verified By: Miami -Dade BCCO - CER
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party:
%3d%3d ti4
r,FinYF1 I V58inF9BnaiCP9M128DTOr2U91%2bsL1Qw
1/4/2018 Florida Building Code Online
24483.6
United FGUR70 I
Asphalt Saturated Felt underlayment, 1 square #30
Limits of Use i
Certification Agency Certificate
Approved for use in HVHZ: Yes
FL24483 RO C CAC 17042710.odf
Approved for use outside HVHZ: Yes
Quality Assurance Contract Expiration Date
Impact Resistant: N/A i
03/28/2018
Design Pressure:.N/A
Installation Instructions
Other:
FL24483 RO II 17042710.pdf
Verified By: Mlaml-Dade BCCO - CER
Created by Independent Third Party:
I
Evaluatlon Reports
Created by Independent Third Party:
24483.7
Weather -Armor CX- 1
High Strength hybrid underlayment comprised of two layer
polyolefin and polyester synthetic fabric with a thin layer of
modified bitumen between the two plies.
Limits of Use I
Certification Agency Certificate
Approved for use in HVHZ: Yes
FL24483 RO C CSC 17042710.pdf
Approved for use outside HVHZ: Yes
Quality Assurance Contract Expiration Date
Impact Resistant: N/A
03/28/2018
Design Pressure: N/A
Installation Instructions
Other:
FL24483 RO II 17042710.pdf
Verified By: Mlaml-Dade BCCO - CER
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party:
24483.8
Weather -Armor 73
Self -adhering membrane composed of elastic polymers,
bitumen polyester and glass reinforcement.
Limits of Use j
Certification Agency Certificate
Approved for use In HVHZ: Yes
FL24483 ROC CAC 17042710.ndf
Approved for use outside HVHZ: Yes
Quality Assurance Contract Expiration Date
Impact Resistant: N/A
03/28/2018
Design Pressure: N/A
Installation Instructions
Other:
FLM483 RO II 17042710.odf
Verified By: Miami -Dade BCCO - CER
Created by Independent Third Party:
i
Evaluation Reports
Created by Independent Third Party:
Weather -Armor HT3
Self -adhering membrane composed of elastic polymers,
24483.9 _
bitumen, glass reinforcements and a cross laminated sheet
surfacing.
.Limits of Use
Certification Agency Certificate
Approved for use In HVHZ: Yes
Approved for use outside HVHZ: Yes
FL24483 ROC CAC 17042710.odf
Quality Assurance Contract Expiration Date
Impact Resistant: N/A
03/28/2018
Design Pressure: N/A
Installation Instructions
Other:
FL24483 RO II 17042710.odf
Verified By: Miami -Dade BCCO - CER
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party:
24483.10
Weather -Armor SB-1
Glass fiber reinforced, polymer modified asphalt, granulate,
self -adhered underlayment.
Limits of Use
Certification Agency Certificate
17042710.adf
Approved for use In HVHZ: Yes
Approved for use outside HVHZ: Yes
FL24483 RO C CAC
Quality Assurance Contract Expiration Date
Impact Resistant: N/A
03/28/2018
Design Pressure: N/A
Installation Instructions
Other:
FL24483 RO II 170427 odf
Verified By: Miaml-Dade BCCO - CER
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party:
Contact Us :: 2601 Blair FAone Road Tallahassee FL 32399 one: 850-07-1824
The state of Florida Is an AA/eEo employer. cooyHaht 2007-2013 state of Florida.:: Edyaw Stdt m nt :: Accessibility Statement !: Refund Statement
...... .,...e.. 1— — all oonvinpn,m=wwr VX(3wtr)ntlltLuE1oYFLLV5BinEgBpalCP9M128pTWUSI%2bsLlaW%3d%3d 3/4
1/4/2018 , Florida Building Code Online
Under Florida law, email addre_sses are public records. If you do not want your e-mail address released In response to a public -records request, do not send elect
mail to this entity. Instead, contact the office by phone or by traditional mall. If you have any questions, please contact 850,487.1395. 'Pursuant to Saipan
455.275(1), Florida Statutes, effective October 1, 2012, licensees licensed under Chapter 455, F.S. must provide the Department with an email address if they I
one. The emails providedlmay be used for official communication with the licensee. However email addresses are public record. If you do not wish to supply a lie:
address, please provide the Department with an email address which can be made available to the public. To determine If you are a licensee under Chapter 455,
please dick baL.
Product Approval Accepts:
�FogIM
Credit Card
Safe
tiH,.e.in..„.,ft„ri.lotv:ilriinn rvnlnrinr ann ficaso0oaram=wGE1�X(1wtDQuitLuEIoYFLLV5BinE9BpaICP9M128pTOr2U91%2bsL1Qw%3d°/a3d 4/4
MIiAM
DEPARTMENT OF REGULATORY AND ECONOMIC
BOARD AND CODE ADMINISTRATION DIVISION
NOTICE OF ACCEPTANCE
Gardner Asphalt Corporation
4161 W. 71 Avenue
Tampa, FL. 33605
M1AMI-DADE COUNTY
PRODUCT CONTROL SECTION
;ES (RER) 11805 SW 26 Street Room 208
Miami. Florida 33175-2474
T (786), 315-2590 F (786) 315-2599
www.miamidade.eoy/economy
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami -Dade County RER - Product Control Section to be
used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control Section
(In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right to have this product
or material tested for quality assurance purposes. If this product or material fails to perform in the accepted manner, the
manufacturer will incur the expense of such testing and the AHJ may immediately revoke,. modify, or suspend the use
of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance, if it is
determined by Miami -Dade County Product Control Section that this product or material fails to meet the requirements
of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Gardner Underlayments
i
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERNIINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for
sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of
this NOA shall be cause for termination and removal of NOA.
i
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA revises NOA# 15-0707.09 and consists of pages l through 5.
The submitted documentation was reviewed by Alex Tigera.
NOA:17-0427.10
Expiration Date: 03/28/18
Approval Date: 08/31/17
Page 1 of 5
11
ROOFING COMPONENT APPROVAL
Cateeory: Roofing
Sub-Cateeorv: Underlayment
Material: Asphalt
TRADE NAMES OF PRODUCTS MANUFACTURED OR LABELED BY APPLICANT:
Test Product
Product Dimensions Specification Description
APOC Tuff -Felt 26 36" � 72' rolls ASTM D 226 Type II Asphalt Saturated Felt underlayment, 2
Manufacturing square #30.
Location #1, 2
United FGUR20 36" x 72' rolls ASTM D 226 Type II Asphalt Saturated Felt underlayment, 2
I Manufacturing square #30.
Location #1, 2
APOC Tuff -Felt 46
36" x 144' rolls ASTM D 226 Type I
Asphalt Saturated Felt underlayment, 4
square #15.
Manufacturing
Location #1, 2
United FGUR10
36" x 144' rolls ASTM D 226 Type I
Asphalt Saturated Felt underlayment, 4
square #15.
Manufacturing
Location #1, 2
United FGUR70
18" x 72' rolls ASTM D 226 Type 11
Asphalt Saturated Felt underlayment, 1
square #30.
Manufacturing
Location #1, 2
GatorSidn
42" x 285.8' rolls ASTM D 226 Type II
Synthetic roof underlayment comprised
of layers of polyolefin film.
Manufacturing
Location #3
Weather -Armor CX-L
37.25" x 145' rolls ASTM D 226 Type II
High strength hybrid underlayment
comprised of two layers of polyolefin and
Manufacturing
polyester synthetic fabric with a thin layer
Location #3
of modified bitumen between the two
plies.
Weather -Armor SB-1
36" x 65' 8" rolls ASTM D 1970
Glass fiber asphalt, granulated self-adheredmodified
Manufacturing
underlayment.
Location #4
Weather -Armor HT3
39" x 65' 8" rolls ASTM D 1970
e bpolymers,hering
mran composed thick of elastic
Manufacturing
bitumen, glass reinforcements and a cross
Location #4
laminated sheet surfacing.
NOA: 17-0427.10
MIAMmADECou�r Expiration Date: 03/28/18
• • • Approval Date: 08/31/17
Page 2 of 5
e
I
TRADE NAMES OF PRODUCTS MANUFACTURED OR LABELED BY APPLICANT:
Test Product
Product Dimensions Specification Description
Weather -Armor FV 39" x 65' 8" rolls TAS 103 60-mils thick (nominally), self -adhering
Manufacturing membrane composed of elastic polymers,
Location #4 bitumen polyester and glass
reinforcement.
MANUFACTURING LOCATIONS:
1. Tacoma, WA.
2. Eutaw, AL.
3. Hangzhou, China.
4. Springville, AL.
EVIDENCE SUBMITTED:
Test Aeency Test Identifier
Test Name/Reyort
Date
PRI Construction Materials GGI-100-02-01
ASTM D 226
06/22/12
Technologies 00I-101-02-01
ASTM D 226
06/22/12
GGI-132-02-01
ASTM D 226
04/28/15
GGI-176-02-01
ASTM D 226
09/26/16
GGI-178-02-01
ASTM D 1970
10/25/16
GGI-194-02-01
ASTM D 1970
08/04/17
GGI-146-02-01
TAS 103
08/08/17
APPROVED ASSEMBLIES:
Deck Type 1: Wood, Non -insulated
Deck Description: 19/32" or greater plywood or wood plank
System E(1): Anchor sheet mechanically fastened to deck.
Anchor Sheet: One or more plies of APOC Tuff -Felt 26, United FGUR20, United FGUR70, GatorSkin, or
Weather -Armor CX-L with a minimum 4" headlap and a 6" end lap mechanically fastened to
deck with approved nails and tin caps 6 inches o.c. minimum at all laps and three staggered
rows fastened at 12 inches'o.c. minimum in the field of the roll. Nails shall be driven flush and
90 degrees to the roof deck.
Surfacing: Shall be acceptable for use in approved asphaltic shingles, wood shakes, & shingles, quarry
slate, metal roof applications, and as an anchor sheet in roof tile applications. Must Comply with
applicable Roofing Application Standards and Building Codes.
NOA: 17-0427.10
Expiration Date: 03/28/18
" • • Approval Date: 08/31/17
Page 3 of 5
Deck Type 1: Wood, N
Deck Description: 19/32" or g
System E(2): Anchor s
;r plywood or wood plank
mechanically fastened to deck.
Anchor Sheet: Minimum 2 plies or more of APOC Tuff -Felt 46, or United FGUR10 with a minimum 19"
headlap and a 6" end lap mechanically fastened to deck with approved nails and tin caps 6
inches o.c. minimum at all laps and three staggered rows fastened at 12 inches o.c. minimum in
the field of the roll. Nails shall be driven flush and 90 degrees to the roof deck.
Surfacing: Shall be ace I table for use in approved asphaltic shingles, wood shakes, & shingles, quarry
slate, metal roof applications, and as an anchor sheet in roof tile applications. Must Comply with
applicable Roofing Application Standards and Building Codes.
Deck Type 1: Wood, Non -insulated
Deck Description: 19132" or greatel plywood or wood plank
System E(3): Anchor sheet mechanically fastened to deck, membrane adhered.
Anchor Sheet: One or more plies of ASTM D 226 Type H or ASTM D 2626 with a minimum 4" headlap and a
6 end lap mechanically fastened to deck with approved nails and tin caps 6" o.c. at the side lap
edge and in a grid pattern spaced 12" o.c. in the field of the roll.
Membrane: One or more plies of Weather -Armor SB-I, or Weather -Armor HT 3 self -adhering membrane
adhered to the anchor sheet with a minimum 3" headlap and 6" end lap.
Surfacing: Shall be acceptable for use in approved asphaltic shingles, wood shakes, & shingles, quarry
slate, and metal roof applications. Must Comply with applicable Roofing Application Standards
and Building Cordes.
Deck Type 1: Wood, Non -insulated
Deck Description: 19132" or greater plywood or wood plank
System E(4): Anchor sheet mechanically fastened to deck, membrane adhered.
Anchor Sheet: One or more plieslof ASTM D 226 Type II or ASTM D 2626 with a minimum 4" headlap and a
6" end lap mechanically fastened to deck with approved nails and tin caps 6" o.c. at the side lap
edge and in a grid�pattem spaced 12" o.c. in the field of the roll.
Membrane: One or more plies lof Weather -Armor FT3 self -adhering membrane adhered to the anchor sheet
with a minimum 3" headlap and 6" end lap.
Surfacing: Shall be acceptable for use in approved asphaltic shingles, wood shakes, & shingles, quarry
slate, metal roof, and mechanically fastened roof tile applications. Must Comply with applicable
Roofing Application Standards and Building Codes.
NOA:17-0427.10
M�nt+►�naoe Expiration Date: 03/28/18
Approval Date: 08/31/17
Page 4 of 5
LABELING:
All membranes or packaging shall bear the imprint or identifiable marking of the manufacturer's name or logo, city,
state and the following statement: "Miami -Dade County Product Control Approved" or the Miami -Dade County
Product Control Seal as shown below.
MIIAMEOADE COUOF
APPROVED'
G PERNIIT REQUIREMENTS: BUILDINI
Application for building permit shall. be accompanied by copies of the following:
1. This Notice of Acceptance.
2. Any other documents required, by the Building Official or applicable building code in order to properly evaluate
the installation of this material.
LIMITATIONS:
1. Fire classification is not part of this acceptance; refer to a current Approved Roofing Materials Directory for
Fire ratings of this product.
2. This acceptance is for prepared roofing applications. Minimum deck requirements shall be in compliance
with applicable building code.
3. Weather -Armor SB-1, and Weather -Armor HV shall not be hot mopped; refer to manufacturer's published
literature for product compatibility.
4. Gardner Underlayments listed herein are components used in roof assemblies. Roof assemblies are approved
under specific assembly Notice of Acceptance.
5. APOC-Tuff Felt 26, United FGUR20, APOC ,Tuff Felt 46, United FGUR10, United FGUR70, GatorSkin,
Weather Armor CX-L; and Weather -Armor SB-1 listed herein shall not be left exposed as a temporary roof
for longer than 30 days of application. j1
6. Weather -Armor HT3 and' Weather -Armor FT3 fisted herein shall not be left exposed as a temporary roof for
longer than 180 days of application. '
7. Gardner Underlayments listed herein may bl used with any approved roof covering Notice of Acceptance
listing Gardner Underlayments listed herein as a component part of an assembly in the Notice of Acceptance.
If Gardner Underlayments listed herein is !not listed; a request may be made to the Authority Having
Jurisdiction (AHJ) or the Miami -Dade County Product Control Department for approval provided that
appropriate documentation is provided to detail compatibility of the products, wind uplift resistance, and fire
testing results.
8. For fire classification of specific roof assemblies using Gardner Underlayments listed herein refer to a
current Approved Roofing Materials Directory for fire ratings of this product.
9. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code
and Rule 61G20-3 of the Florida Administrative Code.
END OF THIS ACCEPTANCE
NOA: 17-0427.10
MuwFL1ADECONPt1Y Expiration Date: 03/29/18
Approval Date: 08/31/17
Page 5 of 5