HomeMy WebLinkAboutEVALUATION REPORTf 1
NEM01 etc.
lJ if Certificate of Authorization #32455
�� i�� 353 Christian Street, Unit #13
tYt Oxford, CT 06478
(203) 262-9245
ENGINEER EVALUATE I TEST CONSULT CERTIFY
REPORTEVALUATION
Soprema, Inc. Evaluation Report S18010.06.09-1112
1640 rue Haggerty FL2569-R14
Drummondville, Qu6bec J2C 5P8 Canada Date of Issuance: 06/1S/2009
(819) 478-2400 Revision 12: 02/12/2018
SCOPE:
This Evaluation Report is issued under Rule 61G,
construction materials in the State of Florida. The
P.E. for use of the product under the Florida B
products described herein have been evaluated
sections noted herein.
DESCRIPTION: Soprema Roof Underlayments
LABELING: Labeling shall be in accordance with
herein.
-3 and the applicable rules and regulations governing the use of
ocumentation submitted has been reviewed by Robert Nieminen,
ding Code and Florida Building Code, Residential Volume. The
,r compliance with the 6th Edition (2017) Florida Building Code
requirements of the Accredited Quality Assurance Agency noted
CONTINUED COMPLIANCE: This Evaluation Report is alid until such time as the named product(s) changes, the referenced
Quality Assurance documentation changes, or pr visions of the Code that relate to the product change. Acceptance of
this Evaluation Report by the named client con titutes agreement to notify Robert Nieminen, P.E. of any changes to
the product(s), the Quality Assurance or the pr duction facility location(s). NEMO I etc. requires a complete review of
this Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded by the words "NEMOIetc. Evaluated" may be displayed in
advertising literature. If any portion of the Eval ation Report is displayed, then it shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or
its distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists of pages 1 through 8.
Prepared by:
Robert J.M. Nieminen, P.E.
Florida Registration No. 59166, Florida DCA ANE1
CERTIFICATION OF INDEPENDENCE:
1. NEMO ETC, LLC does not have, nor does it ii
distributing products it evaluates.
2. NEMO ETC, LLC is not owned, operated or co
3. Robert Nieminen, P.E. does not have nor wil
which the evaluation reports are being issues
4. Robert Nieminen, P.E. does not have, nor wi
product.
5. This is a building code evaluation. Neither
project on which this Evaluation Report, or
specificall for that purpose.
ST. LUCIE COUNTY BUILDI
REVIEWED FOR COMPLIA�V
REVIEW Y II
DATElze2t
THESE PLANS AND ALL PROPOSED WORK
ARE SUBJECT TO ANY CORRECTIONS
nannnr,
REQUIRED BY FIELD INSPECTORS THAT
MAY BE NECESSARY IN ORDER TO
COMPLY WITH ALL APPLICABLE CODES.
;,o'•.„� :: r,:',-�:
The facsimile seal appearing was authorized by Robert
t.�„,D�t
Nieminen, P.E. on 02/12/2018. This does not serve as an
electronically signed document.
to acquire or will it acquire, a financial interest in any company manufacturing or
led by any company manufacturing or distributing products it evaluates.
uire, a financial interest in any company manufacturing or distributing products for
acquire, a financial interest in any other entity involved in the approval process of the
iNEMO letc. nor Robert Nieminen, P.E. are, in any way, the Designer of Record for any
revious versions thereof, is/was used for permitting or design guidance unless retained
��(� CONCEALED FASTENERS OR ATTACHMENTS
I / _ ARE THE RESPONSIBILITY OF THE
NG DIVISION ���V`-G� `'�CONTRACTOR OR RECORD
FILE COP
Y
PLANS AND PERMIT MUSt BE KEP%,0N JOB
SITE OR NO INSPECTIRS) WILL BE MADE
ONEMO I etc.
ROOFING COMPONENT EVALUATION:
Product Category: Roofing
Sub -Category: Underlayment
Compliance Statement: Roof Underlayments, as produced by Soprema, have demonstrated compliance with the
following sections of the 6th Edition (2017) Flo ida Building Code through testing in accordance with the following
Standards. Compliance is subject to the Installation Requirements and Limitations / Conditions of Use set forth
herein.
Section
Property
Standard
Year
1504.3.1
Wind Resistance
FM 4474
2011
1504.3.1
Wind Uplift
UL 1897
2012
1507.2.4 / 1507.1.1, 1507.2.9.2
Physical Properti s
ASTM D1970
2015
1507.3.3
Physical Properties
FRSA/TRI April 2012
2012
FRSA/TRI April 2012 (04-12)
Physical Properties
ASTM D6163
2008
TAS 110
Accelerated Weathering
ASTM D4798
2011
3.
REFERENCES:
Enti
Examination
Reference
Date
ERD (TST6049)
ASTM D1970 / AS 110
2968.05.04-2
05/14/2004
ERD (TST6049)
Physical Properties
2757.02.05
02/03/2005
ERD (TST6049)
ASTM D1970 / AS 110
2974.03.05-2
05/17/2005
ERD (TST6049)
Wind Resistanc
2778.07.05
07/15/2005
ERD (TST6049)
Wind Resistan a
2779.11.05-111
04/18/2007
ERD (TST6049)
TAS 103 / TAS 10
S7120.11.07-2
11/02/2007
ERD (TST6049)
ASTM D1970 / AS 110
S13190.02.09-131
04/01/2010
ERD (TST6049)
ASTM D1970 / TAS 110
S31370.03.10-1-R1
04/07/2010
ERD (TST6049)
Physical Prope ies / Tensile Adhesion
S11150.05.10-R1
09/09/2010
ERD (TST6049)
Physical Prop rties / Tensile Adhesion
S11150.05.09-R2
10/05/2010 .
ERD (TST6049)
ASTM D1970
S37210.11.11
11/09/2011
ERD (TST6049)
ASTM D1970
S40540.02.13-1
02/19/2013
ERD (TST6049)
Physical Prop rties / Tensile Adhesion
S43530.02.14-1
02/21/2014
ERD (TST6049)
Physical Properties / Tensile Adhesion
SOPC-SC7645.02.15
02/13/2015
ERD (TST6049)
Accelerated weathering
SOPC-SC8520.14
04/17/2015
ERD (TST6049)
Wind Resistance
SOPC-SC14045.05.17-RS 06/07/2017
M-D (CER1592)
HVHZ Comply�ance
15-0508.04
09/24/2015
ICC-ES(EVL2396)
20151BC Co pliance
ESR-1524
03/01/2017
PRI (TST5878)
Physical Pro erties
SOP-064-02-01
12/03/2013
Soprema, Inc. (PDM3511)
Equivalency, eclaration
SA SMOOTH PLY 40
06/29/2015
UL, LLC (QUA9625)
Quality Con •rol
Service Confirmation
Exp. 07/18/2020
PRODUCT4. DESCRIPTION:
4.1
Lastobond TU HT is a self -adhering,) non -woven polyester fabric surfaced, SBS
modified bitumen roof
underlayment; meets ASTM D1970 and F(tSA/TRI April 2012 (04-12).
4.2
Lastobond Shield is a self -adhering,
woven polyethylene surfaced, SBS modified bitumen roof underlayment
available in two widths; 36 and
45 inch; �I eets ASTM D1970.
4.3
RESISTO SA SMOOTH PLY 40 is a sellf-adhering, woven polyethylene surfaced, SBS modified bitumen roof
underlayment; available in 3.3 ft x 65 ft rolls; meets ASTM D1970.
4.4
Lastobond Shield HT is a self -adhering,
v�roven polyethylene surfaced, high temperature, SBS modified bitumen roof
underlayment; meets ASTM D1970.
NEMO ETC, LLC IEvaluation Report S18010.06.09-1112
Certificate afAuthariration #32455 6'" EDIT ON (2017) FBC NON-HVHZ EVALUATION FL2569-R14
j Soprema Roof Underlayments Revision 12: 02/12/2018
Page 2 of 8
4.5 Lastobond Pro HT-N is a self -adhering, woven
available in two widths; 36 and 45 inch; meets A
4.6 Lastobond Pro HT-S is a self -adhering, woven pi
underlayment; meets ASTM D1970.
4.7 Enviro5hield is a self -adhering, woven polyel
underlayment; meets ASTM D1970.
4.8 Lastobond 195 is a self -adhering, glass -mat rei
meets ASTM D1970.
4.9 Lastobond Eaves Protection Sheet is a self-adl
roof underlayment; meets ASTM D1970. 1
4.10 Lastobond Eco is a self -adhering, glass -mat rei
meets ASTM D1970.
4.11 Lastobond Smooth Seal HT is a self -adhering
underlayment; meets ASTM D1970. I
4.12 RESISTO LB1236 is a self -adhering, glass -mat IE
with a 36-inch sheet width; meets ASTM D197�,
4.13 PrimeSource Grip -Rite Eave & Valley Proti I
modified bitumen roof underlayment, with a 6
4.14 RESISTO LB1244 is a self -adhering, glass -mat rE
with a 44-inch sheet width; meets ASTM D197, 0
INNEMOletc.
surfaced, SBS modified bitumen roof underlayment
D1970.
iylene surfaced, high temperature, SBS modified bitumen roof
surfaced, high temperature, SBS modified bitumen roof
sand -surfaced, SBS modified bitumen roof underlayment;
glass -mat reinforced, sand -surfaced, SBS modified bitumen
nforced, sand -surfaced, SBS modified bitumen roof underlayment;
glass -mat reinforced, film -surfaced, SBS modified bitumen roof
inforced, sand -surfaced, SBS modified bitumen roof underlayment,
r is a self -adhering, glass -mat reinforced, sand -surfaced, SBS
ch sheet width; meets ASTM D1970.
orced, sand -surfaced, SBS modified bitumen roof underlayment,
4.15 Colphene FIR GR is a self -adhering, fib6rglass reinforced, granule -surfaced, SBS modified bitumen roof
underlayment; meets ASTM D1970 and FRSA/TRI April 2012 (04-12).
5.1 This is a building code evaluation. Neither EMO ETC, LLC nor Robert Nieminen, P.E. are, in any way, the Designer
of Record for any project on which this Eva[ II ation Report, or previous versions thereof, is/was used for permitting
or design guidance unless retained specifiCal y for that purpose.
5.2 This Evaluation Report is not for use in FBC VHZ jurisdictions.
5.3 Fire Classification is not part of this report; refer to current Approved Roofing Materials Directory for fire ratings of
this product.
5.4 Soprema Roof Underlayments may be used with any prepared roof cover where the product is specifically
referenced within FBC approval docume Its. If not listed, a request may be made to the Authority Having
Jurisdiction for approval based on this evaluation combined with supporting data for the prepared roof covering.
5.5 Allowable Roof Covers: I
TABLE 1: ROOF COVEROPTIONS
Wood or
Slate or
Underlayment
Asp alt
Nail -On
Foam -On
Metal
Composite
Composite
Shingles
les
Tile
Tile
Shakes &
Slate
Shingles
Yes
Lastobond TU HT
Yes
Yes
Yes
Yes
Yes
l `
See 5.5.1
Lastobond Shield / Pro HT-N /
Yi s
No
No
No
Yes.
Yes
RESISTO SA SMOOTH PLY 40
Lastobond Shield HT/ Pro HT-S
lies.
No
No
Yes
Yes
Yes
Enviro5hield
Yes
No
I No
Yes
Yes,
Yes
NEMO ETC, LLC
Certificate a/Autharization #32455
6T" EDITI N (2017) FBC NON-HVHZ EVALUATION
Soprema Roof Underlayments
Evaluation Report S38030.06.09-R32
FLZ569-R14
Revision 12: 02/12/2018
Page 3 of 8
ONEMO I etc.
TABLE 1: ROOF COVER OPTIONS
I
Wood or
Slate or
Underlayment
Asphalt
Nail -On
Foam -On
Metal
Composite
Composite
Shingles
Tile
Tile
Shakes &
Shingles
Slate
Lastobond Eaves Protection Sheet /
yes` F
No ,No
No -
YesYes
Lastobond 195
,
Lastobond ECO / RESISTO LB1236,
Grip -Rite Eave & Valley Protector/
Yes,
No
No
No
Yes.
Yes'
RESISTO LB1244
LSst6bondSmooth,SeaLHT, ,.-:., _slim
Yes
No
Yes '
'o
Yes
Yes
IWOMM
Colphene FR GR
Yes
No
Yes
Yes
See'5.5.1
5.5.1 "Foam -On Tile" is limited to use of following ARIproved tile adhesives / underlayment combinations.
Adhesive Florida
Dow TileBond'"
ICP Adhesives Polyset® AH-160
5.6 Allowable Substrates:
5.6.1 Direct -Bond to Deck:
Underlayments
Lastobond TU HT
Lastobond TU HT or Colphene FR GR
Lastobond Shield, Lastobond Pro HT-N, RESISTO SA SMOOTH PLY 40, Lastobond Shield HT, Lastobond Pro HT-S,
EnviroShield, Lastobond TU HT, Lastobonll Eaves Protection Sheet, Lastobond 195, Lastobond ECO, RESISTO
LB1236, Grip -Rite Eave & Valley Protector, RESISTO LB1244 or Lastobond Smooth Seal HT applied to:
➢ Plywood; ASTM D41 primed plywood; PSB; ASTM D41 primed OSB; Southern Yellow Pine; ASTM D41 primed
Southern Yellow Pine; ASTM D41 primed structural concrete.
Colphene FR GR applied to:
➢ Plywood; ASTM D41 primed plywood; STM D41 primed structural concrete.
Note:
➢ While not required over plywood, OSB or Southern Yellow Pine substrates, Soprema recommends priming
with Elastocol Stick or Elastocol 600c i the final roof cover is not slated for installation within 24 hours.
➢ Soprema requires tongue -and -groove) board decking be covered with plywood or OSB prior to installation of
the self -adhering underlayment.
5.6.2 Bond -to -Insulation:
Lastobond Shield, Lastobond Pro HT-N, ESISTO SA SMOOTH PLY 40, Lastobond Shield HT, Lastobond Pro HT-S,
EnviroShield, Lastobond TU HT, Lastob�nd Eaves Protection Sheet, Lastobond 195, Lastobond ECO, RESISTO
LB1236, Grip -Rite Eave & Valley Protector, RESISTO LB1244, Lastobond Smooth Seal HT or Colphene FR GR
applied to:
➢ Dens Deck Prime; SECUROCK Gypsu I Fiber Roof Board.
For installation under mechanically attached prepared roof coverings, insulation shall be attached per minimum
requirements of the prepared roof cov ring manufacturer's Product Approval. For installations under foam -on
tile systems (Lastobond TU HT only), insulation attachment shall be designed by a qualified design professional
and installed based on testing of the insulation/underlayment system in accordance with FM 4474, Appendix D,
Testing Application Standard TAS 114, Appendix J or UL1807.
1 Refer to Tile Manufacturer's or Adhesive Manufact rer's Florida Product Approval for Overturning Moment Resistance Performance.
NEMO ETC, LLC Evaluation Report S38010.06.09-1112
Certificate of Authorization #32455 6T" EDITION (2017) FBC NON-HVHZ EVALUATION FL2569-1114
SI prema Roof Underlayments Revision 12: 02/12/2018
Page 4 of 8
5.6.3
5.6.4
#1
*NEMO I etc.
Bond to Mechanically Attached Base Laver:
Lastobond Shield, Lastobond Pro HT-N, RESIST SA SMOOTH PLY 40, Lastobond Shield HT, Lastobond Pro HT-S,
EnviroShield, Lastobond TU HT, Lastobond Eves Protection Sheet, Lastobond 195, Lastobond ECO, RESISTO
LB1236, Grip -Rite Eave & Valley Protector, ESISTO LB1244, Lastobond Smooth Seal HT or Colphene FR GR
applied to:
➢ ASTM D226, Type I or II felt; Sopra-G; Mod fied Sopra-G.
For installations under mechanically attached prepared roof coverings, base layer shall be attached per minimum
codified requirements. For installations under` foam -on tile systems (Lastobond TU HT only), base layer shall be
attached in accordance with FRSA/TRI April 2(�12 (04-12).
wina Resistance for Underlayment Systems in Foam -On Tile Applications: FRSA/TRI April 2012 (04-12) does not
address wind uplift resistance of all undoplayment systems beneath foam -on tile systems, where the
underlayment forms part of the load -path. Tfollowing wind uplift limitations apply to underlayment systems
that are not addressed in FRSA/TRI April 2012 (04-12) and are used in foam -on tile applications. Maximum
Design Pressure is the result of testing for wind load resistance based on allowable wind loads, and reflects the
ultimate passing pressure divided by 2 (the to 1 margin of safety per FBC 1504.9 has already been applied).
Refer to FRSA/TRI April 2012 (04-12) or FBC 609 for determination of design wind pressures.
Maximum Design Pressure = -45.0 psf:
Deck: Min. 15/32-inch plywood to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Primer: (Optional) Elastocol Stick, lastocol 600c or RESISTO EXTERIOR PRIMER
Underlayment: Lastobond TU HT or Colphene FR GR, self -adhered.
#2 Maximum Design Pressure = -67.5 osf:
Deck:
Structural concrete to
Jurisdiction.
Primer:
Elastocol600c
Underlayment:
Lastobond TU HT or Coll
#3 Maximum Design Pressure = -150.0 psf:
Deck:
Min. 15/32-inch APA-r
requirements to satisfac
Deck Preparation: Plywood shall be thorOL
sheathing fasteners shi
projections shall be rem
Primer:
(Optional) RESISTO EXTE
Underlayment:
Lastobond TU HT, self-;
roller to ensure there a
laps.
#4 Maximum Design Pressure = -60.0 Dsf:
Deck: Min. 19/32-inch plyw
Jurisdiction.
Base Sheet: Sopra-G or Modified 5
1517.5.2) spaced 6-ini
in the center of the sh
Underlayment: Lastobond TU HT or C
project requirements to satisfaction of Authority Having
ne FR GR, self -adhered.
:ed BCX plywood (may be installed C-side up) to meet project
on of Authority Having Jurisdiction.
hly cleaned to remove dust and debris that may inhibit adhesion. All
be driven flush with the surface. All sharp splinters and wood
IOR PRIMER
Ihered, shall be thoroughly roll using hand roller and/or weighted
no voids, and ensure there are no voids/bridging at side and end -
to meet project requirements to satisfaction of Authority Having
ra-G mechanically attached with nails (FBC 1517.5.1) and tin caps (FBC
o.c. at the 4-inch laps and 6-inch o.c. in three (3), equally spaced rows
phene FR GR, self -adhered
5.6.4.1 All other direct -deck, adhered Soprema nderlayment systems beneath foam -on tile systems carry a Maximum
Design Pressure of -45 psf.
NEIVIO ETC, LLC Evaluation Report S18010.06.09-1112
Certificate ojAuthorization #32455 6T" EDITIO (2017) FBC NON-HVHZ EVALUATION F1.2569-1114
So rema Roof Underlayments Revision 12: 02/12/2018
1 Page 5 of 8
5.6.4.2
5.7
5.8
OMEMO I etc.
For mechanically attached Base Sheet, the mg'ximum design pressure for the selected assembly shall meet or
exceed that required under FRSA/TRI April 201 (04-12), Appendix A, Table 1A.
Alternatively, the maximum design pressure f r the selected assembly shall meet or exceed the Zone 1 design
pressure determined in accordance with FBC 1609. In this case, Zones 2 and 3 shall employ an attachment
density designed by a qualified design profe sional to resist the elevated pressure criteria. Commonly used
methods are ANSI/SPRI WD1, FM Loss Prevent ion Data Sheet 1-29 and Roofing Application Standard RAS 117.
Assemblies marked with an asterisk* carry the limitations set forth in Section 2.2.10.1 of FM Loss Prevention
Data Sheet 1-29 (January 2016) for Zone 2/3 e6ancements.
Exposure Limitations:
Lastobond Eaves Protection Sheet, Lastobond 195,Lastobond Eco, Lastobond Smooth Seal HT, RESISTO LB1236,
Grip -Rite Eave & Valley Protector or RESISTO LB1244 shall not be left exposed for longer than 30-days after
installation.
Lastobond Shield, Lastobond Pro HT-N, RESIST O SA SMOOTH PLY 40, Lastobond Shield HT or Lastobond Pro HT-
S, EnviroShield shall not be left exposed for longer than 90-days after installation.
Lastobond TU HT or Colphene FR GR shall no> be left exposed for longer than 180-days after installation.
I ue Slippage Limitations (TA5 103 Der FRSA/TIRI April 2012 (04-12))•
When loading roof tiles on the underlayment in direct -deck tile assemblies, the maximum roof slope shall be as
follows. These slope limitations can only be &ceeded by using battens during loading of the roof tiles.
TABLE 2: TILE SLIPPAGE LIMITATIONS FOR
DIREcT-DECK TILE INSTALLATIONS
Underlayment Tile Pofile
Staging Method
Maximum
e
Slope
Flat
Max. 10-tile stack
6:12
Lugged
Max. 10-tile stack
5:12
Max. 10-tile stack (bottom 2-tile stack
shall be inverted, followed by 8 tiles high 6:12
on slope, as shown below)
ral
Lastobond TU HT
Lugged
S
Colphene FR GR
jFlat
Max. 10-tile stack 5:12
Lugged
Max. 10-tile stack 6:12
NEMO ETC, LLC Evaluation Report 518010.06.09-Ri2
Certificate o/Authorization #32455 6' EDITION (2017) FBC NON-HVHZ EVALUATION FL2569-R14
Soprema Roof Underlayment$ Revision 12: 02/12/2018
Il Page 6 of 8
OMEMO I etc.
6.1 Soprema Roof Underlayments shall be installe in accordance with Soprema published installation requirements
subject to the Limitations set forth in Section 5 herein and the specifics noted below.
6.2 Re -fasten any loose decking panels, and chec for protruding nail heads. Sweep the substrate thoroughly to
remove any dust and debris prior to applicati n, and prime the substrate with Elastocol Stick, Elastocol 600c or
RESISTO EXTERIOR PRIMER (if applicable).
6.3 Lastobond TU HT, Lastobond Shield, Lastobond Pro HT-N, RESISTO SA SMOOTH PLY 40, Lastobond Shield HT,
Lastobond Pro HT-S, EnviroSh)eld, Lastobond Eaves Protection Sheet, Lastobond 195, Lastobond Eco, Lastobond
Smooth Seal HT, RESISTO LB1236, Grip -Rite Eawe & Valley Protector, RESISTO LB1244 or Colphene FR GR:
6.3.1 Shall be installed in compliance with the requirements for ASTM D1970 underlayment in FBC Table 1507.1.1 for
the type of prepared roof covering to be instal ed.
6.3.2 Non -Tile Applications:
While priming is optional, Soprema recommends priming with Elastocol Stick, Elastocol 600c or RESISTO EXTERIOR
PRIMER if the final roof cover is not slated for nstallation within 24 hours.
Apply sheet parallel to the roof edge. Roll o t approximately 10 ft of membrane and peel back the first 3 ft of
release film.
6.3.3
Adhere the exposed part to the substrate andlunroll the remaining membrane as far as possible.
Once the entire length of membrane is in pl ce, peel -off the release film diagonally while holding the membrane
tight. Firmly roll the membrane into place W7� ieve a bond.
Horizontal seams should be minimum 3-inch�s, configured to shed water. Vertical seams should be 6-inches and
staggered not less than 2-ft from vertical sFchniques.
ms in the course below. All over -granule end -laps shall be sealed
using either heat -welding or hot air welding
When installing at slopes above 8:12, Sopra recommends back -nailing in the overlap area at the top of the
sheet at 12-inch D.C.
For Valleys and Ridges: Cut underlayment lo 4 to 6 foot lengths. Peel the release paper and center sheet over
valley or ridge. Drape and press sheet into place, working from the center of the valley or ridge in each direction.
For valleys, apply the sheet starting at the lowest point and work upward.
Reference is made to FRSA/TRI April 2012 (04-12) Installation Manual and Table 1 herein, using the instructions
noted above as a guideline.
For foam -on tile applications, reference is ade to Section 5.6.4 herein for wind resistance limitations that fall
outside the scope of FRSA/TRI April 2012 (04-12).
Tile shall be loaded and staged in a manner)) that prevents tile slippage and/or damage to the underlayment. See
Table 2 herein, and Soprema published regiirements for tile staging.
As required by the Building Official or Authprity Having Jurisdiction in order to properly evaluate the installation of
this product.
NEMO ETC, LLC Evaluation Report S18010.06.09-1112
Certificate ojAuthorization #32455 6' EDITION (2017) FBC NON-HVHZ EVALUATION FLZ569-1114
So rema Roof Underlayments Revision 12: 02/12/2018
Page 7 of 8
ONEMOjetc.
Contact the noted QA agency for information onl product locations covered for F.A.C. 61G20-3 QA requirements.
The following plants have qualified products uncle'. their respective physical properties specifications.
Plant
Specification
Product(s)
Lastobond Shield, RESISTO SA SMOOTH PLY 40, Lastobond Shield HT,
Drummondville,
Lastobond Pro HT-N, Lastobond Pro HT-S, EnviroShield, Lastobond 195,
QC (Canada)
ASTM D1970
Lastobond Eaves Protection Sheet, Lastobond Eco, Lastobond Smooth
Seal HT, RESISTO LB1236, PrimeSource Grip -Rite Eave & Valley
Protector, RESISTO LB1244
ASTM D1970 & FRSA/TRI 04-12
Colphene FR GR
Wadsworth, OH
Lastobond 195, Lastobond Eaves Protection Sheet, Lastobond Eco,
ASTM D1970
Lastobond Smooth Seal HT, RESISTO LB1236, PrimeSource Grip -Rite
Eave & Valley Protector, RESISTO LB1244
ASTM D1970 & FRSA/TRI 04-12
Lastobond TU HT; Colphene FR GR
Gulfport, MS
Lastobond 195, Lastobond Eaves Protection Sheet, Lastobond Eco,
ASTM D1970
Lastobond Smooth Seal HT, RESISTO LB1236, PrimeSource Grip -Rite
Eave & Valley Protector, RESISTO LB1244