HomeMy WebLinkAboutNOAto
SCANNEQ
r� l�t(�63"9Pi1a
MIAMI-DA13�
D< PARTMENI' OF REGULATORY AND ECONOYiIC RESOURCi S (R11R)
BOARD AND CODE ADMINISTRATiON DIVISION
NOTICE OF ACCEPTANCE (NOA)
GAF
1 Campus Drive
Parsippany, NJ 07054
MIAMI-DADE COUNTY
PRODUCT CONTROL, SECTION
I I Soy SW 26 Sircei, Room''-08
Miami, Florida 33175-2474
T (786) 3 15-2590 P (786) 315-2599
�rww.miami(ladc.eov/cconom�
I
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by M:iarni-Dade County R(R - Product Control Section to be
used in Miami Dade County and other areas where allowed by the 'Authority Having ,Jurisdiction (AI-IJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control
Section (in Miami Dade County) and/or the. AI-IJ (in areas other [hall Miami Dade County) reserve the right to
have this product or material tested for quality assurance purp0scs1,. if this product or material fails to perform in
the accepted manner, the manufacturer will incur the expense of such testing and the AHJ may immediately
revoke, modify, or suspend the use ol'such product or material within theirjurisdiction. RER reserves the right to
revoke this acceptance, if it is determined by Miarni-Dade County Product Control Section that this product or
material falls to meet the requirements ofthe applicable building co'dc.
I
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity 1-i1.11-rictule Zone ofthe Florida BuildingJiCode.
DESCRIPTION: GAF Timberline HI9U"', Timberline' Natural Shadow"", Timberline' American Harvest`', and
Fortitude'"'' Shingles
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami -Dade County Product Control Approved", unless; otherwise n(.)ted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting (lie perl'ornlance�ol'this product.
I
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture ofthe product or process. Misuse,of this NOA as an endorsement of any product,
for sales, advertising or any other purposes shad automatically terminate this NOA. Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: 'The NOA number preceded by the words Miami -Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion ofthe NOA is displayed. then it shall be done
ill its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA renews and revises NOA P 14-1022.20 and consists of pages l through G.
The submitted documentation was reviewed by Alex Tigera.
FILE COPY
NOA No.: 16-0811.11
Expiration Date: 02/21/22
Approval Date: 02/09/17
Page 1 of 6
IF
ROOFING ASSE1 W.y APPROVAL
Catetiorv: Roofing
Sub -Category: Asphalt Shingles
Materials: Laminate
Deck Type: Wood
SCOPE
This approves GAF Timberline 111) ", Timberline' Natural. Shadow", Timberline American'A.-larvest", and
.Fortitude-"" Shingles as manufactured by GAF as described in this Notice of Acceptance.
PRODUCT DESCRIPTION
°�irPfbW" litie''l�l
GAF 'rimberline Natural
Shadow`°'
Manuf lentring
Locations #1, 2, 3, 4, 5, 6, 7
GAF Timberline'"' American
harvest""
Adcntt(facluriug
L oc•alions #2, 4, 5, 6
GAF Fortitude-""
rl'lctnuJac�luriug
Locations #1, 4
Dimensions 'rest i Product Description
Specilicatibns
*1[t >i(J FibcE l ss rciirfi�i �cl lienvy�vetgl .i�a• ss halt
Aia;Aoorshingle, withal, 'minate•pto:Cl
13 '/a•x 39'/h•• TAS 110, Fiberglass reinforced heavy weight asphalt
roof shingle, with a laminate profile
13 /," x 393/8• TAS 110. Fiberglass reinforced heavy weight asphalt
roo{'shingle, with a laminate profile
13/.i x 39 'i TAS 1 10 Fiberglass reinforced heavy weight asphalt
roof shingle, with a laminate profile
MANUFACTURiNG LOC.ATiON
1. Tampa, FL
2. Michigan City, IN
3. Baltimore, MD
4. Mycrstown, PA
5. Ennis, TX
6. Tuscaloosa, AL
7. Dallas.. TX
NOA No.: 16-0811.11
Expiration Date: 02/21/22
Approval Date: 02/09/17
Page 2 of 6
EVIDENCE SUBMITTED
'Pest A(*enev
"Pest. Identlfl6r
Test Name/Report
Date
Underwriters Laboratorics.LLC
ASTM D346�
4797344101
07/25./16
Underwriters Laboratories, Inc.
ASTM I)346?
1 i CA48924
10/24/ 1 1
Underwriters Laboratories, Inc
ASTM D3462
IOC'A21994
04/22/11
Underwriters Laboratories, Inc
ASTM D3462
IOCA287.17
07/26/11
Underwriters Laboratories, Inc.
ASTM D3462
05CA47541
11/10/06
Underwriters Laboratories, Inc.
ASTM D3462
06CA31580
1 1/30i06
PRI Asphalt Technologies, inc.
ASTM D346?
GAF- 101-02-02
1 1/02/05
Underwriters Laboratories, inc.
ASTM D3462
06NK05159
08/09/06
PRI Asphalt Technologies, Inc.
ASTM D3462
GAF-098-02-02
11108105
Underwriters Laboratories, Inc.
ASTM D3462
02NK41809
08/11/02
Underwriters Laboratories, Inc.
ASTM D3462'
03:NK26444
10/ 17/03
Center For Applied Engineering
ASTM D3461
257989.
05/13/97
Underwriters Laboratories, Inc.
TAS 107
O i NK45803
04/ 13/94
Underwriters Laboratories, inc.
TAS 107
06NK.05159
08/09/06
Underwriters Laboratories, Inc.
TAS 107
04NI{04273
02/20/04
Underwriters Laboratories, Inc.
TAS 107
05CA42840
1.1/11105
Underwriters Laboratories, Inc.
TAS 107
02NK4181 1
11/1 1/02
Underwriters Laboratories, Inc.
TAS 107
03CA35209
1.0/17103
Underwriters Laboratories, Inc.
TAS 107
04CA13850
08/30/04
Center for Applied Engineering
TAS 100
257989
04/01/97
PRI Asphalt Technologies, Inc.
TAS 100
GAF-044-02-01.
01/13/04
PR[ Asphalt 'Technologies, Inc.
TAS I00
GAF-098-02-01
1 1/08/05
PRI Asphalt "Technologies, Inc.
TAS 100
GAF-101-02-01
1 1/09.!05
PRI Asphalt Technologies, inc.
TAS 100
GAF-1 16-02-02
03/23/06
PRi Asphalt Technologies, Inc.
TAS-100
ELK-083-02-01
10/.16/02
1LK-084-02-01
10/ 15/02
ELK-085-02-01
10/ 14/02
ELK-0 8 6-02-01
10/24/02
ELK-087-02-01
10/2.1 /02
ELK-088-02-01
10/ 16/02
ELK-107-02-01
10/09/03
ELK-108-02-01
10/09/03
ELK-109-02-01
10/09/103
LiMITATiONS
1. Fire classification is not part of' this acceptance;
refer to a current
Approved Roofing Materials
Directory for
Fire ratings of this product.
2. Shall not be Installed on roof mean heights
In excess of 33 ft.
3. All products listed herein shall have a gUallty assurance aUdlt in accordance with (lie Florida Building Code
and Ru1c 61G20-3 of the Florida Administrative
Code.
NOA No.: 16-0811.11
QMIAMI•DAD: COUNTY Expiration- Date: 02/21/22
Approval Date: 02/09/17
Page 3 of 6
INSTALLATION
1. Shingles shall be installed in compliance with Rooming Application Standard RAS i l5.
2. Flashing shall be in accordance with Roofing- Application Standard RAS 115
3. The manufacturer shall provide clearly written application,instructions.
4. F..xposure and course layout shall be in compliance with Detail 'A', attached.
5. Nailing shall be in compliance. with Detail 'B', attached.
LABELING`.
Shingles shall bear the imprint or identifiable marking of the; manufacturer's name or logo, city and state of
manufacturing facility, and following statement: "Miami -Dade County Product Control Approved" or the Miami -Dade
County Product Control Seal as shown below•. I
MIAMI•DADE COUNTY
,...rem
BUILDING PE, RMIT REQUiREMENTS
i
1. Application for building permit shall be accompanied by conies of'the following:
1.1 This Notice of Acceptance. 1
1.2 Any other documents required by the Building Official or the applicable code in order- to properly
evaluate the installation of this system.
NOA No.: 16-081 I.11
Expiration Date: 02/21/22
Approval Date: 02/09/17
Page 4 of 6
DETAIL A
COURSE LAYOUT
NOA .No.: 16-0811.11
Expiration Date: 02/21/22
Approval Date: 02/09/17
Page 5 of 6
DETAIL I
®VERALI, DIMENSIONS AND NAILING PA'1 TEItN
39-3/811
(tm)
— 14-1 /2" - 17-1 /2" 14-1 /2" - 17-1 /2" —
(366-445mm) (366-445mm)
6-1/2" - 9-112" 6-1/2" - 9-1/2"
ENHANCED NAILING PATTERN - six nails per shingle*
required by some local codes and required for enhanced windicoverage on certain products.
See limited warranty for details.
These shingles MUST be nailed a nominal 6" (152mm) from bottom of
of shingle, above the cut outs, as shown. Nails must not be exposed.
END OF THIS ACCEPTANCE
Nail guide line
5-3/4" - 6-114"
(146mm - 159mm)
from bottom of shingle
Self seal
adhesive
on back
;VOA No.: 16-0811.11
ENpiration Date: 02/21/22
Approval Date: 02/09/17
Pare 6 of 6
I