HomeMy WebLinkAboutPRODUCT APPROVAL ROOFING UNDERLAYMENTI
I SCANNED
Business & Professional Regulation
BCIS Home ! Log In ! User Registration ! Hot Topics ! Submit Surcharge ! Stats & Facts !
Florida _
.J`- Product Approval
USER: Public User
Product p_RMygl Menu > Product or AQpilcation Search > epplica[lon List > Application Detail
1, OFFICE OF FL # FL12328-R8
SECREURY Application Type Revision
Code Version 2017
Application Status Approved
Comments
Archived 0
Product Manufacturer TAMKO Building, Products, Inc.
Address/Phone/Email I PO Box 1404
I Joplin, MO 64802
(417) 624-6644 Ext2305
kerri__gden@tamko.com
Authorized Signature
Technical Representative
Address/Phone/Email
Quality Assurance Representative
Address/Phone/Email
Category
Subcategory
Compliance Method
Kerri Eden
kerrL_eden@tamko.com
Kerri Eden
PO Box 1404
Joplin, MO 64802
(417)624-6644 Ext2305
kerri_eden@tamko.com
Roofing
Underlayments
Tit
- O'nHOW ABOUT0600 roan Division -coWrACi'Dam
RECEIVED
APR 18 2018
ST. Lucie County, Permitting
Evaluation Report from a Florida Registered Architect or a Licensed Florida
Professional Engineer
Evaluation Report - Hardcopy Received
Florida Engineer or Architect Name who developed the Zachary R. Priest
Evaluation Report
Florida License PE-74021
Quality Assurance Entity i UL LLC
Quality Assurance Contract Expiration Date 01/07/2019
Validated By Locke Bowden P.E.
iValidation Checklist - Hardcopy Received
Certificate of Independence
Referenced Standard and Year (of Standard)
FL12328 R8 COI TBP14001.4 2017 FBC Eval Report TAMKO
Underlayments final.pd
Standard
Year
ASTM D1970
2015
ASTM D226
2009
ASTM D4869
2016
ASTM D6380
2003
TAS 103
1995
Equivalence of Product Standards
Certified By
Approved for use in HVHZ: Yes I
FL12328 R8 II TBP14001.4 2017 FBC Eval Report TAMKO
Underlayments final.pdf
Approved for use outside HVHZ: Yes ;
Impact Resistant: N/A
Verified By: Zachary R. Priest 74021
Design Pressure: N/A
Created by Independent Third Party, Yes
Other: See evaluation report for limits of use.
Evaluation Reports
FL12328 R8 AE TBP14001.4 2017 FBC Eval Report TAMKO
Underlayments final.pdf
i
Created by Independent Third Party. Yes
123
No. 3 M I
Asphalt saturated organic felt
L' is of Use
Installation Instructions
Approved for use in HVHZ: Yes
FU2328 R8 II TBP14001 4 2017 FBC Eval Report TAMKO
Underayments finaLpdf
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Verified By: Zachary R. Priest 74021
Design Pressure: N/A
Created by Independent Third Party: Yes
Other: See evaluation report for limits of e.
Evaluation Reports
FL12328 R8 AE TBP14001.4 2017 FBC Eval Report TAMKO
Underlayments final.pdf
Created by Independent Third Party: Yes
12328.8
No. 30 UL
Asphalt saturated organic felt
Limits of Use
Installation Instructions
Approved for use in HVHZ: Yes
FL12328 R8 II TBP14001.4 2017 FBC Eval Report TAMKO
Underlayments final.pdf
Approved for use outside HVHZ: Yes I
Impact Resistant: N/A
Verified By: Zachary R. Priest 74021
Design Pressure: N/A
Other: See evaluation report for limits of use.
Created by Independent Third Party: Yes
Evaluation Reports
FL12328 R8 AE TBP14001.4 2017 FBC Eval Report TAMKO
Underlayments final.pd
Created by Independent Third Party: Yes
i
12328.9
TAM -FELT I
Alternate to ASTM D 226, Type II underlayment
Limits of Use
Installation Instructions
Approved for use in HVHZ: Yes
FL12328 R8 II TBP14001.4 2017 FBC Eval Report TAMKO
Underlayments final.pdf
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Verified By: Zachary R. Priest PE-74021
Design Pressure: N/A
Created by Independent Third Party: Yes
Other: See evaluation report for limits of use.
Evaluation Reports
FL12328 R8 AE TBP14001.4 2017 FBC Eval Report TAMKO
Underlayments final.p_df
I
Created by Independent Third Party: Yes
i
12328.10
TW Metal and Tile Underlayment
self -adhering modified bitumen underlayment
Limits of Use
Approved for use in HVHZ: Yes
Installation Instructions
FL12328 R8 II TBP14001.4 2017 FBC Eval Report TAMKO
Underlayments final.pdf
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Verified By: Zachary R. Priest 74021
Design Pressure: N/A I
Created by Independent Third Party: Yes
Other: See evaluation report for limits of use.
Evaluation Reports
FL12328 R8 AE TBP14001,4 2017 FBC Eval Report TAMKO
Underlayments final.odf
Created by Independent Third Party: Yes
I
12328.11
TW Underlayment
self -adhering modified bitumen underlayment
Limits of Use
Installation Instructions
Approved for use in HVHZ: Yes
Approved for use outside HVHZ:IYes
FL12328 R8 II TBP14001.4 2017 FBC Eval Report TAMKO
Underlayments final.pd
Impact Resistant: N/A
Verified By: Zachary R. Priest 74021
Design Pressure: N/A
Created by Independent Third Party: Yes
Other: See evaluation report for limits of use.
Evaluation Reports
FL12328 R8 AE TBP14001.4 2017 FBC Eval Report TAMKO
Underlayments fiinal.Rdf
Created by Independent Third Party: Yes
i
Contact Us :: 2601 Blair Stone Road, Tallahassee FL 32399 Phone: 850-487-1824
The State of Florida is an AA/EEO employer. Coo ri�7c ht 2007-2013 State of Florida.:: Privacy Statement :: Accessibility. Statement :: Refund Statement
I
Under Florida law, email addresses are public records. If you do not want your e-mail address released in response to a public -records request, do not send electronic
mail to this entity. Instead, contact the office by phone or by traditional mail. If you have any questions, please contact 850.487.1395. *Pursuant to Section
455.275(1), Florida Statutes, effective October 1, 2012, licensees licensed under Chapter 455, F.S. must provide the Department with an email address if they have
one. The emails provided may be used for official communication with the licensee. However email addresses are public record. If you do not wish to supply a personal
address, please provide the Department with an email address which can be made available to the public. To determine if you are a licensee under Chapter 455, F.S.,
please click here .
Product Approval Accepts:
CREEK
TECHNICAL SERVICES, LLC
EVALUATION REPORT
Manufacturer: TAMKO BUILDING PRODUCTS, INC.
P.O. Box 1404 1
Joplin, MO 64802
(417) 624-6644 j
hftp://www.tamko.com
Quality Assurance: UL LLC (QUA9625)
SCOPE ;
Certificate of Authorization No. 29824
17520 Edinburgh Drive
Tampa, FL 33647
(813) 480-3421
FLORIDA BUILDING CODE, 6T" EDITION (2017)
Issued October 19, 2017
Category:
Subcategory:
f
Roofing i
Undedayments 11
Code Sections:
1507.1.1
Properties:
Physical propertes
PRODUCT DESCRIPTION
I
i
i
TAMKO® ASTM Slate ASTM D 6380, Class M, Type II underlayment constructed from organic felt saturated
Surfaced Roll Roofing with asphalt and coated on both sides with asphalt and surfaced with granules.
TAMKO® ASTM Tile ASTM D 6380, Class M, Type II underlayment constructed from an organic felt saturated
Underlayment with asphalt then coated on both sides with asphalt and surfaced with granules.
TAMKO® Master
Smooth
TAMKO® Moisture
Guard®
TAMKOO No.15 ASTM
Asphalt Saturated
Organic Felt
TAMKO® No.15 UL
Asphalt Saturated
Organic Felt
A O® No. 30 AS
As
alt Saturated
Organic Felt
ASTM D 6380, Class S, Type IV underlayment constructed from an organic felt saturated
with asphalt then coated on both sides with asphalt and surfaced with a fine mineral. For
use in non-HVHZ only.
Self -adhered, ASTM D 1970, fiberglass reinforced, modified bitumen sheet membrane
with a mineral surfacing and a removable. release film on the adhesive side and
removable selvedge release tape.
ASTM D 226, Type I underlayment constructed from a non -perforated organic felt that is
saturated with asphalt.
ASTM; D 226, Type I underlayment constructed from a non -perforated organic felt that is
saturated with asphalt.
ASTM D 226, Type 11 underlayment constructed from a non -perforated organic felt that is
saturated with asphalt
TAMKO® No. 30 UL ASTM D 226, Type II underlayment constructed from a non -perforated organic felt that is
Asphalt Saturated saturated with asphalt
Organic Felt
I
TAMKOO TW Metal and 361f-adhered, flexible, ASTM D 1970 and TAS 103, rubberized asphalt sheet membrane
Tile Underlayment with a polymer film on the surface and a removable release film on the adhesive side.
i
TAMKO® TW Self -adhered, flexible, ASTM D 1970, rubberized asphalt sheet membrane with a
Underlayment polymer film on the surface and a removable release film on the adhesive side.
TBP14001.4 FL12328-R8 Page 1 of 4
This evaluation report is provided for State of Florida product approval under Rule 61G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein:
CREEK
TAMKO BUILDING PRODCUTS, INC.
TAMKO Underlayments
TECHNICAL SERVICES, LLC l
1
TAMKO® TAM -FELT Alternate to ASTM D; 226, Type I and Type II underlayment constructed from a non -
perforated organic felt that is saturated with asphalt.
APPLICATION METHOD
Installation shall be in accordance with the published manufacturer's installation instructions, the FBC, and the
requirements below. I
Deck substrates shall be clean, dry, and free from any irregularities and debris. All fasteners in the deck shall be
checked for protrusion and corrected prior to underlayment application.
The roof deck shall be constructed of closely fitted plywood sheathing for new or existing construction. Plywood deck
shall be installed in accordance with FBC requirements. Roof decks shall have no more than 1/8" gap at abutting
joints. j
The minimum application temperature shall be 50°F except as follows:
a) The minimum application temperature of TAMKO@ TW Metal and Tile Underlayment and TAMKO@ TW
Underlayment shall be 40-F`
b) The minimum application temperature of TAMKO@) Moisture Guard® shall be 35°F.
The minimum roof slope shall be in accordance with FBC requirements except as follows:
a) The minimum slope of TAMKO@ ASTM Slate Surfaced Roll Roofing shall be 2:12.
Underlayments shall be exposed in accordance with the manufacturer's recommendations, but in no case shall
exposure exceed 30 days. I'
Exception: TAMKO@ TW Metal and Tile Underlayment may be exposed for a maximum 90 days.
Self -adhering underlayments may be adhered to primed or unprimed plywood substrates in the non-HVHZ.
i
All roof coverings shall be mechanic1ally fastened through the underlayment to the roof deck.
Alloy ble Roof Coverinns- I
Metal Roof
. Mineral
Wood
1 Asphalt
Panels and
Surfaced Roll
Shingles and
Slate
Clay and
Underlayment
{` Shin les
Shingles
Roofing
Shakes
Shingles
Concrete Tile
TAMKO@ ASTM Slate
Y'
N
N
N
N
Y
Surfaced Roll Roofing
1
TAMKO@ ASTM Tile
N
N
N
N
N
Y
Underlayment
TAMKO@ Master Smooth
i
Y'
N
N
N
N
N
i
TAMKO@ Moisture Guard@
Y
N
N
N
N
N
TAMKO@ No. 15 ASTM
Asphalt Saturated Organic
Y
Y
Y
Yz
N
N
Felt
TAMKO@ No. 15 UL Asphalt
Y
Y
Y
YZ
Y
N
Saturated Organic Felt
o. 0 ASTM .
Asphalt Saturated Organic'
Y
Y
Y
Y
Y
Y
Felt
T O@ No. 30 UL Asphalt
Y
Y
Y
N
Y
N
Saturated Organic Felt
TAMKO@ TW Metal and Tile
Y
Y
N
N
N
Y
Underlayment
TAMKO@ TW Underlayment
Y
Y
N
N
N
N
TAMKO@ TAM -FELT
Y
N
N
N
N
N
Notes: 1) Open valley applications per 1507.2.9.2
2) Wood shingles only
TBP14001.4 FL12328-R8 Page 2 of 4
This evaluation report, Is provided for State of Florida product approval under Rule 61G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
CREEK
TECHNICAL SERVICES, LLC
LIMITATIONS
TAMKO BUILDING PRODCUTS, INC.
TAMKO Underlayments
1) Fire Classification is not within the scope of this evaluation.
2) Wind uplift resistance in not within scope of this evaluation.
3) Installation of the evaluated product shall comply with this report, the FBC, and the manufacturer's published
application instructions. Where discrepancies exist between these sources, the more restrictive and FBC
compliant installation detail shall prevail.
4) Contact the manufacturer when installing at temperatures below the minimum application temperature.
5) Unless otherwise stated, the minimum Iroof slope shall be in accordance with FBC requirements.
6) All underlayments shall be installed with the roll length parallel to the eave, starting at the eave, and lapped
in successive courses installed up the deck in a manner that effectively sheds water from the deck. End
laps shall be staggered between courses in accordance with the manufacturer's application instructions.
7) The underlayment may be used as described in other current FBC product approval documents.
8) The underlayment shall not be installed over existing roof coverings.
9) Contact the manufacturer regarding Ispecific exposure limits for each underlayment.
10) All products listed in this report shall be manufactured under a quality assurance program in compliance with
Rule 61 G20-3.
REFERENCES I
Enti I Report No. Standard Year
PRI Construction Materials Technologies (TSTG049) TAP-192-02-01 ASTM D 1970 2015a
PRI Construction Materials Technologies (TST6049) TAP-193-02-01 ASTM D 1970 2015a
PRI Construction Materials Technologies (TST6049) TAP-214-02-01 ASTM D 4869 2016
PRI Construction Materials Technologies (TST6049) TAP-215-02-01 ASTM D 226 2009
PRI Construction Materials Technologies (TST6049) TAP-216-02-03 ASTM D 6380 20D3(2013)
PRI Construction Materials Technologies (TST6049) TAP-217-02-01 REV ASTM D 6380 2003(2013)
PRI Construction Materials Technologies (TST6049) TAP-218-02-01 ASTM D 226 2009
PRI Construction Materials Technologies (TST6049) TAP-219-02-01 ASTM D 226 2009
PRI Construction Materials Technologies (TST6049) TAP-220-02-01 ASTM D 6380 2003(2013)
PRI Construction Materials Technologies (T$T6049) TAP-222-02-01 ASTM D 4869 2016
PRI Construction Materials Technologies (TST6049) TAP-245-02-01 TAS 103 1995
ASTM D 4798 2011
PRI Construction Materials Technologies (TST6049) TAP-311-02-01 ASTM D 1970 2015a
PRI Construction Materials Technologies (TST6049) TAP-319-02-01.1 ACC 188 2012
PRI Construction Materials Technologies (TST6049) TAP-387-02-01 ASTM D 1970 2015a
PRI Construction Materials Technologies (TST6049) TAP-388-02-01 ASTM D 1970 2015a
UL LLC (TST9628) 13CA12269 ASTM D 226 2009
TBP14001.4 FL12328-138 Page 3 of 4
This evaluation report is provided for State of Florida product approval under Rule 61G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any+product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
I
1
I
CREEK
TECHNICAL SERVICES, LLC
COMPLIANCE STATEMENT
I
The products evaluated herein by Zachary R. Priest
Code, 61h Edition (2017) as evidenced in the reference
TAiVIKO BUILDING PRODCUTS, INC.
TAMKO Underlayments
P.E. have demonstrated compliance with the Florida Building
I documents submitted by the named manufacturer.
RY R. •I pR�i,�
No 74021
' 13 STATE OF
CERTIFICATION OF INDEPENDENCE
CREEK Technical Services, LLC does not have, nor will it a
evaluation.
CREEK Technical Services, LLC is not owned, operated, or
Zachary R. Priest, P.E. does not have, nor will acquire, a fin
Zachary R. Priest, P.E. does not have, nor will acquire, a fin
_ 2017.10.19
12:15:58
_04r00t
Zachary R. Priest, P.E.
Florida Registration No. 74021
Organization No. ANE9641
a financial interest in any company manufacturing or distributing products under this
by any company manufacturing or distributing products under this evaluation.
interest in any company manufacturing or distributing products under this evaluation.
interest in any other entity involved in the approval process of the product.
END OF REPORT
TBP14001 A I FL12328-R8 Page 4 of 4
This evaluation report is provided for State of Florida product approval under Rule 61G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.