HomeMy WebLinkAboutEVALUATION REPORTSCANNED
BY EXTERIOR RESEARCH & DESIGN, I.I.C.
St Lucie County Certificate of Authorization #9503
�N STREET, UNIT 13
',J TRINITY 1 ERD 353 CHRISTIAO FORD, CT 06478
(203) 262-9245
EVALUATION REPO R R ECEIVED
ICP Adhesives and Sei lants, Inc. Evaluation Report 02768.03.06-118
12505 NW 44th Street MAY ® 3 ? 18 FL6332-RB
Coral Springs, FL 3306 Date of Issuance: 08/08/2008
(888) 774-1419 ST. Lucie County, Permitting Revision 8:10/12/2017
SCOPE:
This Evaluation Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida. The documentation submitted has been reviewed by Robert Nieminen,
P.E. for use of the product under the Florida Building Code. The product described herein has been evaluated for
compliance with the 6th Edition (2017) Florida Building Code sections noted herein.
DESCRIPTION: ICP Adhesives Polyset® AH-160
LABELING: Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted
herein.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s) changes, the referenced
Quality Assurance documentation changes, or provisions of the Code that relate to the product change. Acceptance of
this Evaluation Report by the named client constitutes agreement to notify Robert Nieminen, P.E. if the product
changes or the referenced Quality Assurance documentation changes. Trinity) ERD requires a complete review of this
Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded by the words "Trinity I ERD Evaluated" may be displayed in
advertising literature. If any portion of the Eva Iuatior Report is displayed, then it shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or
its distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists of pages 1 through 9.
Prepared by:
Robert J.M. Nieminen, P.E.
Florida Registration No. 59166, Florida DCA ANE1983
The facsimile seal appearing was authorized by Robert
Nieminen, P.E. on 10/12/2017. This does not serve as an
electronically signed document.
CERTIFICATION OF INDEPENDENCE:
1. Exterior Research & Design, LLC. d/b/a Trinity I ERD does not have, nor does it intend to acquire or will it acquire, a financial interest
in any company manufacturing or distributing products It evaluates.
2. Exterior Research & Design, LLC. d/b/a Trinity I ERD is not owned, operated or controlled by any company manufacturing or
distributing products it evaluates.
3. Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any company manufacturing or distributing products for
which the evaluation reports are being issued.
4. Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any other entity Involved in the approval process of the
product.
5. This is a building code evaluation. Neither Trinityl ERD nor Robert Nieminen, P.E. are, in any way, the Designer of Record for any
project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless retained
specifically for that purpose.
�TRINITYJERD
ROOFING COMPONENT EVALUATION:
1. SCOPE:
Product Category: Roofing
Sub -Category: Roof Tile Adhesives
Compliance Statement: ICP Adhesives Polyset® AH-160, as produced by ICP Adhesives and Sealants, Inc., has
demonstrated compliance with the 6th Edition (2017) Florida Building Code through testing in accordance with the
Standards set forth herein.
Compliance is subject to the Installation Requirements
and Limitations / Conditions of
Use set forth herein. .
2. STANDARDS:
Sections
Pro a Standard
Year
1504.2.1.1
Overturning resistance SSTD 11
1997
3. REFERENCES:
Kaibt
Examination Reference
Date
ERD (TST 6049)
Static Uplift—SSTD 11 P39740.02.12
02/20/2012
ERD (TST6049)
Static Uplift—SSTD 11 P39740.11.13-R1
01/02/2015
ICC-ES (EVL2396)
2012 IBC Compliance ESR-1709
12/01/2016
Miami -Dade (CER 1592)
HVHZ compliance 17-0322.03
04/27/2017
PRI (TST 5878)
Static Uplift—SSTD 11 ECM-001-02-01
09/21/2001
PRI (TST 5878)
Static Uplift—SSTD 11 PFI-006-02-01
05/09/2005
PRI (TST 5878)
Static Uplift—SSTD 11. PFI-006-02-02
05/09/2005
PRI (TST 5878)
Static Uplift—SSTD 11 PFI-007-02-01
10/11/2605
PRI (TST 5878)
Static Uplift — SSTD 11 PFI-008-02-04
02/21/2006
PRI (TST 5878)
Static Uplift—SSTD 11 PFI-009-02-03
02/21/2006
PRI (TST 5878)
Static Uplift—SSTD 11 TGRI-001-02-03
10/30/2006
PRI (TST 5878)
Static Uplift—SSTD 11 TGRI-001-02-03
10/30/2006
PRI (TST 5878)
Static Uplift—SSTD 11 PFPI-010-02-01
12/07/2006
PRI (TST 5878)
Static Uplift—SSTD 11 PFPI-011-02-01
12/07/2006
PRI (TST 5878)
Static Uplift—SSTD 11 PFPI-012-02-01
12/07/2006
PRI (TST 5878)
Static Uplift—SSTD 11 PFPI-013-02-01
12/07/2006
PRI (TST 5878)
Static Uplift—SSTD 11 PFPI-014-02-01
12/07/2006
PRI (TST 5878)
Static Uplift—SSTD 11 ECM-003-02-01
06/13/2008
PRI (TST 5878)
Static Uplift—SSTD 11 ECM-004-02-01
06/13/2008
PRI (TST 5878)
Static Uplift — SSTD 11 ECM-005-02-01
06/13/2008
PRI (TST 5878)
Static Uplift—SSTD 11 ECM-006-02-01
06/13/2008
PRI (TST 5878)
Static Uplift—SSTD 11 ECM-007-02-01
06/13/2008
PRI (TST 5878)
Static Uplift —SSTD11 ECM-008-02-01
06/13/2009
UL LLC (QUA 9625)
Quality Assurance Service Confirmation
Exp. 06/05/2018
4. PRODUCT DESCRIPTION:
4.1 ICP Adhesives Polyset® AH-160 is a two -component expanding polyurethane
roof tile adhesive that is mixed
and dispensed from a dispensing system provided by ICP Adhesives and Sealants, Inc. The components are
available in refillable tanks or disposable cylinders (ICP Adhesives ProPacko 30 & 100).
5. LIMITATIONS:
5.1 This is a building code evaluation. Neither Trinity I ERD nor Robert Nieminen, P.E. are, in anyway, the Designer
of Record for any project on which this Evaluation Report, or previous versions
thereof, is/was used for
permitting or design guidance unless retained specifically for that purpose.
5.2 This Evaluation Report is not for use in FBC HVHZ jurisdictions.
Exterior Research and Design, LLC.
Evaluation Report 02768.03.06-R8
Certijlcate ofAutharizatlon #9503
6'u EDITION (2017) FBC NON-HVHZ EVALUATION
FL6332-R8
ICP Adhesives Polyset® AH-160; (888) 774-1419
Revision 8:10/12/2017
Page 2 of 9
5.3 Fire classification is not part of this evaluation. Refer to a current Roofing Materials Directory for fire ratings
of this product and FBC 1505.2.
5.4 ICP Adhesives Polyset® AH-160 can be used with flat, low and high profile tiles or any rigid, discontinuous roof
assembly having a current Florida Statewide Product Approval or approved on a local -level by the Authority
Having Jurisdiction.
5.5 Minimum underlayment shall be per FRSA/TRI April 2012 (04-12) or having a current Florida Statewide
Product Approval or approved on a local -level by the Authority Having Jurisdiction for use with ICP Adhesives
Polyset® AH-160.
5.6 Field tiles, meeting the limitations of FBC 1609.5.3, using ICP Adhesives Polyset® AH-160 are limited to
projects having an Aerodynamic Uplift Moment (Ma), determined in accordance with FBC 1609.5.3 or Tables
2A and 2B of FRSA/TRI April 2012 (04-12), not greater than the following Allowable Overturning. Moment
values. Refer to Section 10 and ICP Adhesives and Sealants, Inc. published installation instructions for
Adhesive Paddy Placement details.
TABLE 1: FIELD TILESJIN ICP ADHESIVES POLYSETO AH-166
ALLOWABLE OVERTURNING MOMENT PERFORMANCE DATA
- 2TOIMARGIN OFSAFETVALREADYAPPUEDFOR INDEPENDENT (SINGLE ORCONTINUOUS PADDY) PLACEMENT
" 4.To:1 MARGIN:OF SAFETYALREADY'APPLIED FOR INTERDEPENDENT (TWO PADDY) PLACEMENT
Tile (FBC 1609.5.3)
Adhesive Paddy Placement
Allowable
Overturning
Type.
Profile
Moment (ft-lbf)
Independent; Single Paddy, Medium (2x7-inch, -30 gram)
60
Clay
Flat
Independent; Single Paddy, Large (WO -inch, -45 gram)
112
Concrete
Interdependent; Two Paddy (4x4-inch on underlayment, 2x4-inch at tile overlap)
54
Independent; Single Paddy, Medium (2x7-inch, -30 gram)
39
Clay
Low
Independent; Single Paddy, Large (2x10-inch, -54 gram)
67
te
Concrete
Medium
Interdependent; Two Paddy (4x4-inch on underlayment, 2x4-inch at the overlap)
58
Clay
High
Independent; Single Paddy, Large (2x10-inch, -45 gram)
134
Independent; Single Paddy, Medium (2x7-inch, "30 gram)
65
Clay
High
Independent; Single Paddy, Large (2x10-inch, -63 gram)
109
Concrete
Interdependent; Two Paddy (4x4-inch on underlayment, 2x4-1nch at tile overlap)
40
Clay
Barrel
2x10-inch x "35 gram for pans; 2 @ WO -Inch x -17 gram for cap
147
Concrete
Barrel
WO -inch x-35 gram for pans; 2 @ ix10-inch x-17 gram for cap
107
Clay
Cap atop 2x
Independent: Continuous Paddy (-34 gram/ft)
135
stringer
Concrete
Cap atop 2x
Independent: Continuous Paddy ("' 34 gram/ft)
116
stringer
ClayCap
atop 2x
Interdependent:
105
stringer
Head: One (1) #10 x 2'/:" screw; Overlap: l x 6 inch (-10.5 gram)
Concrete
Cap atop 2x
Interdependent:
76
stringer
Head: One (1) #10 x 2%" screw; Overlap: 1 x 6 inch (-10.5 gram)
5.6.1 Data in Table 1 relates to installation over a '30/90' underlayment system, as detailed in the FRSA/TRI April
2022 (04-12). Alternate underlayment systems include those having a current Florida Statewide Product
Approval and/or approved on a local -level by the Authority Having Jurisdiction specifically for use with ICP
Adhesives Polyset® AH-160.
5.6.2 Tile roof systems using tile types or profiles other than those listed above acquiring acceptance for use with
ICP Adhesives Polyset® AH-160 shall be tested in accordance with SSTD 11 or Testing Application Standard
TAS 101. For the interdependent two -paddy method, an additional 2-to-1 margin above that specified in
SSTD 11 or Testing Application Standard TAS 101 shall be applied in determining the 'allowable overturning
moment'.
Exterior Research and Design, U.C. Evaluation Report 0276B.03.06-RB
Certificate ofAuthorlration #9503 6m EDITION (2017) FBC NON-HVHZ EVALUATION FL6332 RS
ICP Adhesives Polyset® AH-160; (888) 774-1419 Revision 8:10/12/2017
Page 3 of 9
V TRINA"jY I ERD
5.7 Hip and ridge tiles using ICP Adhesives Polyset® AH-160 are limited to projects having hip/ridge design pressure
requirements, determined in accordance with Table 1A of FRSA/TRI April 2012 (04-12), not greater than the
following values. Refer to ICP Adhesives and Sealants, Inc. published installation instructions for Adhesive
Paddy Placement details.
TABLE 2: HIP & RIDGE TILES IN ICP ADHESIVES POLYSET11 AH-160
ALLOWABLE UPLIFT RESISTANCE, PERFORMANCE DATA
2 TO I MARGIN OF SAFETYALREADYAPPLIED FOR INDEPENDENT (CONTINUOUS PADDY)'PLACEMENT
4 TO 1 MARGIN OF SAFETYALREADYAPPUED FOR INTERDEPENDENT PLACEMENT
Allowable
Tile
Substrate
Attachment Method
Design Pressure
(psf)
Clay
2x PT ridge board
Independent: Continuous Paddy (-34.gram/ft)
116
Concrete
2x PT ridge board
Independent: Continuous'Paddy (134 gram/ft)
107
Clay
2x PT ridge board
Interdependent: Head: One (1) #10 x 2%" screw;
90
Overlap: 1 x 6 inch (-10.5 gram)
Concrete
2x PT ridge board
Interdependent: Head: One (1) #10 x 2Y2" screw;
56
Overlap:1 x 6 inch (-10.5 gram)
Clay or
Hip & Ridge Channel Metal (FL5374):
Independent: Continuous Paddy (-34 gram/ft)
169
Concrete
galvanized only
Clay or
Trim LockTM (FL5374): aluminum,
independent: Continuous Paddy (^34 gram/ft)
173
Concrete
galvanized, Galvalume® or stainless steel
Clay or
Trim Lock"". Plus (FL5374): aluminum,
Independent: Continuous Paddy (" 34 gram/ft)
178
Concrete
galvanized, Galvalume® or stainless steel
Clay
Top Notch (FL8095)
Independent: Continuous Paddy (^ 32 gram/ft)
125
Concrete
Top Notch (FL8095)
Independent: Continuous Paddy 32 gram/ft)
1.46
6. INSTALLATION:
6.1 ICP Adhesives Polyset® AH-160 and the the roof assembly shall be installed in accordance with FRSA/TRI
April 2012 (04-12) and ICP Adhesives and Sealants, Inc. published installation instructions, subject to the
limitations outlined in Section S.
6.2 Hip and ridge boards or hip/ridge metal shallbe installed in accordance with the FRSA/TRI April 2012 (04-12).
Proprietary hip and ridge metal shall be installed in accordance with the manufacturer's Florida Product
Approval.
6.3 Installation shall be performed by applicators who hold a valid Qualified Applicator Card presented'by ICP
Adhesives and Sealants, Inc.
7. BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the
installation of this product.
8. MANUFACTURING PLANTS:
Tomball, TX
9. QUALITY ASSURANCE ENTITY:
UL, LLC. = QUA9625; (847) 664-3623; LeAnna.Gradecki@ul.com
Exterior Research and Design, U.C. Evaluation Report 02768:03.06-R8
Certificate ofAuthorkatlon #9503 6T" EDITION (2017) FBC NON-HVHZ EVALUATION FL6332-RB
ICP Adhesives Polyset® AH-160; (888) 774-1419 Revision 8:10/12/2017
Page 4 of 9
�TRINITYJERD
10. PADDY PLACEMENT DETAILS (FROM ICP ADHESIVES. AND SEALANTS, INC. PUBLISHED LITERATURE):
10.1 Independent, Medium Paddy:
Underlayment A,°
_ c
�71h. yj`Ka 111:
Batten's optional °
EaveCourse
o r �
1101 n: '
Eave
Flat/Low Profile Tile
Hail'through plastic cement
(Wh4n requlred)
Paddy.(Ben"thTile)
Underlayment
7 in. �In.
Battens Optional
Eave
- Closure
Eave Course �
Fascia
i
Medium ProfileTile
Nail through plastic c _ ,e
(when required) Paddy (Beneath Tile)
Underlayment
7 In.z in.
Battensoptional4�; r' %
V EaveCourse `
� Fascia
Weephole
tUin. �2in Eaveclosure
tc7 / Drip edge
High Profile Tile
Exterior Research and Design, I.I.C. Evaluation Report 02768.03.06-118
[ertAcate oJAuthorizatlon #9503 dm EDITION (2017) FBC NON-HVH2 EVALUATION FL6332-RB
ICP Adhesives Polyset® AH-160; (888) 774-1419 Revision 9:10/12/2017
Page 5 of 9
D.2 Independent, Large Paddy:
Nailthrough.plasticcement Paddy(BefieathTile)
(when required).
Underlayment.
Battens optional a
Eave Course
loin: ~` til'. i�
Fascia
n /
EeveGosure__..
Flat/Low Pro
rile Tile
4TRINITY (EtD
Nall through, plastic cement
(whenreg40ed) Underlavment �14
;Srpip.
\ 2m.wide
Battensoptlonal
ti^
w
�L
Medium. Profile rite
Nailth rougkplastic cemen
(wheft required) / Paddy (BeneathTile).
Underlayment
10.in. x ;.
2 in.wide
Battens:
optional,
Eave Course Fascia
Wedphole
TO ih. 2 in. Eave closure'
Drip edge
High ProfileTite
(GeneathTilej
'L Eave Closure
Fascia
Exterior Research and Design, U.C. Evaluation Report 02768.03.06-R8
Certiticate ofAuthorization #9503 6'H EDITION 12017) FBC NON•HVHZ EVALUATION Fi6332 R8
ICP Adhesives Polyset® AH-160; (888) 774-1419 Revision 8: 20/12/2017
Page 6 of 9
A3 Interdependent, Two Paddy:
Battens optional
°
° Paddy (under tile)
Singlepaddy f
on top oftile l
4x 4 in.
Sin'glepaddy
undertiliµ'�
Single paddy � 7
on underlayment 2 x4 in. /
\
10:int Fascia
Fiat/LoW.Proftte Tile
Nalfthr
L....
Battens °
optional o"
v
Single paddy
on underlayment
4 x'4 in. (/
Single 2x4in;
paddy on �\
topof;tile,
Eave cou rse
Nn'.'2/
Nail through plastic cement Single paddy under file
.(when required)
Paddy(between tiles)
Battens Paddy (under tile)
optional o
Single pad `�Ir
on topof t,--.
High Profile Tile
Medium Profile Tito
undertile
,addy (between tiles)
/ Paddy (under tile)
Weephole
Eave closure
Drip edge
`— Eave closure
Fascia
Exterior Research and Design, LLC. Evaluation Report 02768.03.06-R8
Certificate ojAathorizatlon #9503 6t" EDITION (2017) FBC NON-HVHZ EVALUATION FL6332-R8
ICP Adhesives Polyset® AH-160; (988) 774-1419 Revision 8:10/12/2017
Page 7 of 9
10.4. Two Piece Barrel (Cap & Pan) Tile:
1) Place enough adhesive toachieve 65to70sq;In. Steep pitch applications'
in contact with the pan tile. (when requited)
2) 7uugsldd down, Placa adhosivc
.112 inm.Covcrs , to 4 inch-tn from outsido ed0o of covertilo. .
Install cover tile.
ensuie 20 to 26 sq, in. contact area on
each aide of cover tile,,
undeflayment
(` rJ7
am.
Sheathing
Eaveclosure
(matar shown)
Weephole Fascia Board
Remove top portion of the,ea.va.course cover tlle.Abut to second course of
pan tiles.Ensure eave end,of pan and cover tiles are flush at eave line:
Two Piece Barrel - High Profile Tile.
10.5 Hip and Ridge (independent placement):
t_
A l,u,l MP, uuvFra amAcd above
h1 sur4:voa bold sides of Ilh Wittig.- board or gahim�d
imul,frnme: to pxvxide cteadmrbloclsre.
-ro-,W2cli Wrcl, MeR, abead of7CPPohsftttA?3•ld0 ws
be applied doxw W cEtr;zr of lite lery'tatge board or ff-*, ttized
fr<+cna
F11101 I
\JI KINI'jY j ERD
Exterior Research and Design, U.C. Evaluation Report 02768.03.06-118
Certificate ofAuthortzation #9503 6TM EDITION (2017) FBC NON-HVH2 EVALUATION FL6332-R8
ICP Adhesives Polyset® AH-160; (888) 774-1419 Revision 8:10/12/2017
Page 8 of 9
10.6 Hip and Ridge (interdependent placement):
- END OF EVALUATION REPORT
Exterior Research and Design, Ll.C. Evaluation Report 02768.03.06-118
Certfflcate ofAuthorizatlon #9503 6TM EDITION (2017) FBC NON-HVHZ EVALUATION FL6332 R8
ICP Adhesives Polyset® AH-160; (888) 774-2419 Revision 8:10/12/2017
Page 9 of 9