HomeMy WebLinkAboutPRODUCT EVALUATION REPORTJoel Falardeau
FL P.E. #70667
Evolution Engineering, LLC
37841 Hart Circle SCANNED
Zephyrhills, FL 33542
I By
Cell (765)714-9022 Email ioelfalardeau@gmail.c6 i Lucia Couhfs
Product Eval
Date: October 2, 2017
FL Product Approval #: FL17010
Report No.: FL17010-AFFIRM
Project No.: 415-0605
Code: 61h Edition Florida Building Code
Compliance Method: 61G20-3.007(1)(f)
Product Category: Roofing
Product Subcategory: Metal Roofing
Conformance Review:
Product Name: Aluminum Roof Riser Panels
Manufacturer: ASI Building Products
4537 Transport Drive — Bldg #5
Tampa Distribution Center (50th St)
Tampa, FL 33605
Building Code Compliance Section references
• Product evaluation report refere ced sections 1504.3.2, 1507.4, and 2002.1 in the Florida
Building Code.
• Product Approval Installation Drawing referenced section 1604.3, Note A in the Florida Building
Code.
Building Code Design Standard
• The current edition of the Alumini um Design Manual (ADM) shall be used in the design of
aluminum structures per FBC 6th Edition, Section 2002.1.
• The Product Evaluation Report indicates that the current edition of the Aluminum Design
Manual (ADM) where used.
i
The undersigned has reviewed the above' referenced Florida Product approval and associated
documents and found all drawings and reports to be in compliance with ASCE 7-10, and Florida Building
th
Code, 6Edition. This product shall be re-evaluated following updates to the Florida Building Code.
a
Joel Falardeau 1I1I11�
FL P.E. #70667400,
r�`ul�
Evolution Engineering, LLC''-
37841 Hart Circle
Zephyrhills, FL 33542
Cell (765)714-9022 Email joelfalardeau@gmail.com
Limitations and Conditions of Use
I
I
1. Spans shown in tables in the product evaluation report are for the associated wind loads and
may be linearly interpolated.
2. The host structure shall be designed to resist all superimposed loads and shall be of a material
listed in this product's anchor schedule. Any deviations from host conditions described in the
installation drawings shall require site -specific designs by a registered design professional.
3. Components in the installation drawings shall be protected from corrosion and other such
damage per the Florida Building Code. I
4. Refer to the installation drawings for information on fabrication, material properties, and
performance.
5. This report does not evaluate the product for use in High Velocity Hurricane Zones (HVHZ).
6. This report does not include testing for impact resistance.
7. AS[ Building Products is a subsidiary of Lansing Building Products.
Supporting Documents
1. Product Approval Installation Drawing prepared by Evolution Engineering, LLC and sealed by Joel
Falardeau, P.E. (FL P.E. # 70667)
2. Engineering Analysis:
a. Comparative and rational analysis has been conducted for allowable span conditions
based on minimum and maximum boundary span testing.
b. Rational analysis was conducted per Florida Building Code 6th Edition
c. Full -Scale Certified Testing not required due to the code's "exception" available
3. Quality Assurance Entity:
a. Letter of Participation issued by Keystone Certifications, Inc. confirms that this
manufacturer is within a quality assurance program for this product under Rule 61G20-
3.008 (5).
Digitally
signed by ERIK
G STUART
No ]7805
Date:
%ems -
%A'. STATE OF .•4�i�
2017.10.26
nMWOO
10:47:01
-04'00'