HomeMy WebLinkAboutNOAGHO Homes Corp
Meadowood lot 277
• 3218 Bent pine Drive
MIAMI-DADE
DEPARTMENT OF REGULATORY AND ECONOMIC RES,
BOARD AND CODE ADMINISTRATION DIVISION
NOTICE OF ACCEPTANCE (NOA)
Eagle Roofing Products LLC
1575 East C.R. 470
Sumterville, FL 33585
SCOPE:
This NOA is being issued under the applicable rules and
documentation submitted has been reviewed and accepte
used in Miami -Dade County and other areas where allov
This NOA shall not be valid after the expiration date stab
(in Miami -Dade County) and/or the AHJ (in areas other t
product or material tested for quality assurance purposes.
manner, the manufacturer will incur the expense of such 1
suspend the use of such product or material within their j
if it is determined by Miami -Dade County Product Contri
requirements of the applicable building code.
This product is approved as described herein, and has be
including the High Velocity Hurricane Zone of the Flori�
DESCRIPTION: High Profile Concrete Tile
LABELING: Each unit shall bear a permanent label
statement: "Miami -Dade County Product Control Apl
RENEWAL of this NOA shall be considered after a rE
in the applicable building code negatively affecting the
WAND
By
St Lucia Coo*
'ES (RER)
MIAMI-DADE COUNTY
PRODUCT CONTROL SECTION
11805 SW 26 Street, Room 208
Miami, Florida 33175-2474
T (786) 315-2590 F (786) 315-2599
www.miamidade.zov/ecq1qmX
;gulations governing the use of construction materials. The
by Miami -Dade County RER -Product Control Section to be
i by the Authority Having Jurisdiction (AHJ).
below. The Miami -Dade County Product Control Section
n Miami -Dade County) reserve the right to have this
'this product or material fails to perform in the accepted
ting and the AHJ may immediately revoke, modify, or
isdiction. RER reserves the right to revoke this acceptance,
Section that this product or material fails to meet the
designed to comply with the Florida Building Code
Building Code.
the manufacturer's name or logo, city, state and following
P, unless otherwise noted herein.
application has been filed and there has been no change
mane of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or probess. Misuse of this NOA as an endorsement of any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded b the words Miami -Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. if any portion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be
shall be available for inspection at the job site at the
This NOA revises NOA No.16-0314.08 and consists
The submitted documentation was reviewed by
MIAMI-DADE CAPPROVED
OUNTY
to the user by the manufacturer or its distributors and
of the Building Official.
pages 1 through 7.
Semino
NOA No. 17-0822.15
/ Expiration Date: 10/05/21
Approval Date: 10/26/17
l If Page 1 of 7
A
ROOFING ASSEMBLY APPROVAL
Category:
Roofing
Sub Category:
.Roofing Tiles
Material:
Concrete
1. SCOPE:
This approves a new roofing system using High Profile Concrete Tile as manufactured by Eagle Roofing
Products LLC in Sumterville, FL and described in Section 2 of this Notice of Acceptance. For use in locations
where the pressure requirements, as determined by applicable Building Code, do not exceed the design pressure
values obtained by calculations in compliance with RAS 127 using the values listed in section 4 herein. The
attachment calculations shall be done as a moment based system.
2. PRODUCT DESCRIPTION:
Manufactured by
Test
Product
Applicant
Dimensions
Specifications
Description
High Profile Concrete Tile
Lenght = 17"
T
S 112
High profile concrete roof tile. For direct deck or
Width = 12'/4"
T
e la
battened nail -on applications.
Thickness = V2"
Cl
ss III
Trim Pieces
Lenght = varies
T
S 112
Accessory trim, concrete roof pieces for use at
Width = varies
hips, rakes, ridges and valley terminations.
varying thickness
Manufactured for each tile profile.
NOA No. 17-0822.15
MIAMI•DADE COUNTY
Expiration Date: 10/05/21
• •
Approval Date: 10/26/17
Page 2 of 7
2A EVIDENCE SUBMITTED:
Test Aizency
Test Identifier
Test Name/Report
Date
PRI Asphalt Technologies
ERPF-001-02-03
TAS-112
Aug. 2006
Redland Technologies
7161-03
Static Uplift Testing
Dec. 1991
Appendix III
TAS 102 & 102(A)
Redland Technologies
Letter Dated Aug. 1,
Wind Tunnel Testing
Aug. 1994
1994
TAS 108 (Nail -On)
Redland Technologies
P09647-01
Wind Tunnel Testing
Aug. 1994
TAS 108 (Mortar Set)
Redland Technologies
P0402
Withd awal Resistance Testing of screw
Sept. 1993
vs. smooth shank nails
The Center for Applied
94-083
Static Uplift Testing
April 1994
Engineering, Inc.
TAS 101 (Adhesive Set)
The Center for Applied
94-084
Static Uplift Testing
May 1994
Engineering, Inc.
TAS 101 (Mortar Set)
The Center for Applied
25-7094-(3, 6 & 9)
Static Uplift Testing
Oct. 1994
Engineering, Inc.
TAS 102
The Center for Applied
25-7120-(1 & 2)
Static Uplift Testing
Nov. 1994
Engineering, Inc.
TAS 102
The Center for Applied
25-7183-(3 & 4)
Static Uplift Testing
Feb. 1995
Engineering, Inc.
TAS 102
The Center for Applied
25-7214-(3, 4, &7)
Static Uplift Testing
March, 1995
Engineering, Inc.
TAS 102
The Center for Applied
25-7804-4
Static Uplift Testing
Sep. 1996
Engineering, Inc.
TAS 102
Celotex Corporation
520111-3
Static Uplift Testing
Dec. 1998
Testing Services
TAS 101
Celotex Corporation
520191-2-1
Static Uplift Testing
March 1999
Testing Services
TAS 101
Walker Engineering, Inc.
Calculations
Aerodynamic Multiplier
Sep. 2006
ATL of South Florida
RT1211.02-15
TAS-112
12/17/15
ATL of South Florida
RT0706.03.17
TAS-112
09/25/17
NOA No. 17-0822.15
MIAMI-DADE COUNTY Expiration Date: 10/05/21
�ZIIWVROUPA Approval Date: 10/26/17
Page 3 of 7
3. LIMITATIONS:
3.1 Fire classification is not part of this acceptance.
3.2 For mortar or adhesive set tile applications, a static field uplift test in accordance with TAS 106 shall be
required, refer to applicable Building Code.
3.3 Applicant shall retain the services of a Miami -Dade County Certified Laboratory to perform quarterly test
in accordance with TAS 112, appendix `A'. Sich testing shall be submitted to the Miami -Dade County
Product Control Section for review.
3.4 Minimum underlayment shall be in compliance with the applicable Roofing Applications Standards listed
section 4.1 herein.
3.5 30/90 hot mopped underlayment applications may be installed perpendicular to the roof slope unless
stated otherwise by the underlayment material manufacturers published literature.
3.6 This acceptance is for wood deck applications Minimum deck requirements shall be in compliance with
applicable Building Code.
3.7 All products listed herin shall have aquality a surance audit in accordance with the Florida Building Code
and Rule 61G20-3 of the Florida Administrative Code.
4. INSTALLATION
4.1 Eagle Roofing Products LLC, High Profile oncrete Tile and its components shall be installed in strict
compliance with Roofing Application Standrrd RAS 118, RAS 119 and RAS 120.
4.2 Data For Attachment Calculations
Table 1: Average Weight
(W) and Dimensions (I x w )
Tile Profile
Weight-W (Ibf)
Length-1 (ft)
Width-w (ft)
High Profile Concrete Tile
10
1.417
1.04
Table 2: Aerod nainic
Multipliers - A ft3
Tile
Profile
A
Batten Application
(ft3)
A (ft3)
Direct Deck Application
High Profile Concrete Tile
01300
0.277
Table 3: Restoring Moments
due to Gravity - M ft-lbf
Tile
Profile
3":12"
4":12"
5":12"
6":12"
Greater than
7":12"
High Profile
Concrete Tile
Battens
Direct
Deck
Battens
Direct
Deck
Battens
I
Direct
Deck
Battens
Direct
Deck
Battens
Direct
I Deck
6.68
6.99
6.57
6.88
1 6.44
6.73
6.28
6.56
6.10
1 6.38
NOA No. 17-0822.15
MIAMI-DADE couNTY Expiration Date: 10/05/21
�lrnauxeymj Approval Date: 10/26/17
Page 4 of 7
Table 4: Attachment Resistance
for Nail-Qn
(Expressed as a Moment - Mf (ft-lbf)
Systems
Tile
Profile
Fastener Type
Direct Deck
(min 15/32I" plywood)
Direct Deck
(min. 19/32" plywood)
Battens
High Profile
Concrete Tile
2-10d Ring Shank Nails
28.6
41.2
19.4
1-10d Smooth or Screw
Shank Nail
5'.1
6.8
2.8
2-10d Smooth or Screw
Shank Nails
6i.9
9.2
7.3
1 #8 Screw
2 F7
20.7
18.1
2 #8 Screw
Q.2
43.2
29.8
1-10d Smooth or Screw
Shank Nail Field Clip)
2$.1
23.1
19.0
1-10d Smooth or Screw
Shank Nail Eave Clip)
20.3
l
29.3
24.0
2-10d Smooth or Screw
Shank Nails Field Clip)
2�.6
27.6
38.6
2-10d Smooth or Screw
Shank Nails Eave Clip)
38.1
38.1
41.8
2-10d Ring Shank Nails' 33.1 48.1 45.2
1. Installation with a 4" the headlap and fasteners are located a min. of 2'/" from head of tile.
Table 5: Attachment ResistanO Expressed as a Moment Mf (ft-lbf)
for Two Patty Adhesive Set Systems
Tile
Tile Application
Minimum Attachment
Profile
Resistance
High Profile Concrete Tile
Adhesive
29.32
1 See manufactures component approval for installation re ui�ements.
2 The Dow Chemical Company TileBond Average weight per patty 10.7 grams.
ICP Adhesives Polyset® AH-160. Average weight per patty $ grams.
Table 6: Attachment Resistance
for Single Patty Adhesive
Expressed as a Moment - Mf (ft-lbf)
Set Systems
Tile
Profile
Tile Application
Minimum Attachment
Resistance
High Profile Concrete Tile
ICP Adhesives)
Polyset® AH-160
66.53
ICP Adhesivesl
Polyset® AH-160
38.74
3 Large paddy placement of 63grams of Polyset® AH-160.
4 Medium paddy placement of 24grams of Polyset® AH-160.
Table 7: Attachment Resistance
for Mortar)
Expressed as a Moment - Mf(ft-lbf)
Set Systems
Tile
Profile
Tile
A lication
Attachment
Resistance
High Profile Concrete Tile
Mortar
Sets
24.5
5 Tile-Tite Roof Tile Mortar.
NOA No. 17-0822.15
Expiration Date: 10/05/21
Approval Date: 10/26/17
Page 5 of 7
5. LABELING
All tiles shall bear the imprint or ider,
Detail Below), or following statement:
marking of the manufacturer's name or logo (See
-Dade County Product Control Approved".
EAGLE!m:;�
FLORIDA
(LOCATED ON
OF TILE)
EAGLE FL
(LOCATED ON FRONTSIDE OF TILE)
High Profile Concrete Tile LABEL, SUMTERVILLE PLANT
6. BUILDING PERMIT REQUIREMENTS:
6.1 Application for building permit shall be accom
6.1.1 This Notice of Acceptance.
6.1.2 Any other documents required by AHJ or
installation of this system.
MIAMI•DADE COUNTY
...s
ynlj
by copies of the following:
Building Code in order to properly evaluate'the
NOA No. 17-0822.15
Expiration Date: 10/05/21
Approval Date: 10/26/17
Page 6 of 7
Concrete Tile
ACCEPTANCE
NOA No. 17-0822.15
Expiration Date: 10/05/21
Approval Date: 10/26/17
Page 7 of 7