HomeMy WebLinkAboutGROUND INSTALLATIONFrok Aylecrest 03/27/2012 1.3:01 #431 P.023I024Ili
NN E DO
STYLECREST.
Fiberglass Step Anchoring
Guidelines
Crete Installation
'Components (Purchased Locally)
2eich114"x20x W"Both
2cErbv4'x20x 1 WBugs
2each v4" 4m±Vf itM
mete 2cachVfVkfih33
Armors
Installation Guidelines
1) Drill''/4" hole through step and bracket at
desired position through lower wooden
frame member.
2) Install L-brackets using''/4" x 20 x 214"
Bolts, washers, and nuts.
3) Mark location of hole in L-bracket on the
concrete.
4) Move the step away from the house. Drill
holes in concrete at the desired locations.
Tap in concrete anchors.
5) Replace step so that the tops of the concrete
anchors protrude through the L-brackets.
Secure with the nuts and washers.
Ground Installation
List of Components
(2) 484154 Anchor Assemblies
Each assembly. includes:
(1) 15 inch Anchor
(1) 3/8" x 1 %" lag screw
(1) 7/16" X 1 '/a" washer
Ground Installation Guidelines
l ) Set step in desired position and mark the
anchor placements on the ground. Remove
step.
2) Screw the anchors in the ground so that the
eye of the anchor will be in the position as
shown.
3) Replace step and mark the place where the
hole in the eye of the anchor meets the side
of the step at eight of the lower frame
member.
4) Fasten screxower frame member
though eyegt iA&hor and washer.
WARNING: Failure to anchor the step properly
can result in injury. Place the step against the
house. Make sure the surface on which the step
rests is level.
Style Crest, Inc. Drawer A Fremont, Ohio 43420
•+ram
t
'
MEA
f*
ct
ox
vo
h
co
1
mpicuLCTS,
I
I N
n
0
A-Z
�Efi-'Jlll
I