Press Alt + R to read the document text or Alt + P to download or print.
This document contains no pages.
HomeMy WebLinkAboutARCHITECTURAL CONTROL APPLICATIONst
UI ';dmill Village by the Sea Ci-,�do 1
'ANK 10851 South Ocean Drive #169
By Jensen Beach, FL 34957
�CA8 (cr772-229-1145 FAX: 772-288-0175
ARCHITECTURAL CONTROL APPLICATION OO O
Exterior Change or Alteration
p
eke
� K &W4i;
LOT#:��
g"1100"4-vdvv
zee alr/"
a264'004
Home: ��f«%ice Other�hll 7W�- IO������
Description of
Contractor/Persons doing work:_L/��y
Note: Contractor Insurance needs to be on file with the office. (General Liability & Workers
Compensation)
Agreement:
L Alterations require submission of drawing to scale.
2. Painting requires chips of both house and trim colors.
I The Association is not responsible for determining if a Permit is required. Obtaining Permits is the sole
responsibility of the homeowner or the persons doing the work requested in this application. If a Permit is
required, the homeowner must post the permit on said property until the work is approved.
4. A site plan indicating the areas of work is required with dimensions.
5. Specifications of all material to be used must be submitted.
6. The Association, the Developer and the Management Company shall be held harmless from all liability
concerning this application.
7. Homeowner acknowledges that there will be no encroachment of easements or violations of the
Association's Covenants.
8. Th eets o t . Allow 40 days f response of approval or disap all
Sign f HomedAer Dat
For Architectural Committee Use or in Absence of Architectural Committee Board Use Only
Not
Approved
or
l" l-R
I: D !t .
;1a -14
P-ty,1012-112013
ICC
DIVISION: 08 00 00—OPENINGS
SECTION: 08 95 43—VENTS/FOUNDATION FLOOD VENTS
REPORT HOLDER:
FLOOD FLAPS°, LLC
POST OFFICE BOX 1003
ISLE OF PALMS, SOUTH CAROLINA 29451
EVALUATION SUBJECT:
FLOOD FLAPS® AUTOMATIC FLOOD VENTS:
MODELS FFWF12; FFNF12; FFWF08; FFNF08; FFWF05; FFNF05
ICC ICC
PMG cc"—
�TED
Look for the trusted marks of Conformity!
"2014 J�ecipient of Prestigious Western States Seismic Policy Council
(WSSPCC) Award in Excellence"
A Subsidiary of
ICGE valuation Reports are not to be construed as representing aesthetics or any other attributes not 9M�,"utl
speck lly addressed, nor are they to be construed as an endorsement of the subject of the report or a 1
IS
recom ndation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as
ISO/IEC IWO GO
to any �ding or other matter in this report, or as to any product covered by the report. Pmnulcl CemncaUm Body u ee�a ca,
'1000 �
° 2017 ICC Evaluation Service, LLC. All rights reserved.
Evaluation Report
ESR-3560
Reissued September 2017
This report is subject to renewal September 201 a.
wwWAcc-es.orn1 (800) 423-6587 1 (562) 699-0543 A Subsidiary of the International Code Council®
11
1: 08 00 00—OPENINGS
08 95 43=Vents/Foundation Flood Vents
HOLDER:
FLOOD FLAPS®, LLC
POS OFFICE BOX 1003
ISLE � F PALMS, SOUTH CAROLINA 29451
(843) 181.0190
TION SUBJECT:
FLAPS® AUTOMATIC FLOOD VENTS: MODELS
; FFNF12; FFWF08; FFNF08; FFWF05; FFNF05
1.0 EVALUATION SCOPE
with the following codes:
■ 5,2012 and 2009 Intemational Building Code® (IBC)
Jb1
015, 2012 and 2009 Intemational Residential Code®
Pr erties evaluated:
■ hysical operation
■ I ater flow
In eathering
2.0 iSES
d Flaps® automatic flood vents are used to provide for
equalization of hydrostatic flood forces on exterior
1. Certain models also allow natural ventilation.
3.0 JrESCRIP1
3.11General:
5"1,
d Flaps® automatic flood vents are engineered
hanically operated flood vents (FVs) that automatically
flood waters to enter and exit enclosed areas. The
are constructed of ABS plastic which serves as the
housing, and a front grill that contains an anodized
mel al screen imbedded in polypropylene plastic. On
co tact with rising flood water, the grill will disengage from
its ecured position, allowing flood water and debris to flow
thTugh in either direction. The FVs are available in two
series as described in Section 3.3.
The sealed series models contain two rubber flaps that
close the . FV to the passage of air when using with
conditioned areas or sealed crawl spaces. In the same
manner as the grill, the two rubber flaps. are pushed open
by water pressure, allowing water and debris to flow
through the FV in either direction. See Figure 1 for an
illustration of the Flood Flaps® automatic FV.
3.2 Engineered Opening:
The Flood Flaps® automatic FVs comply with the design
principle noted in Sections 2.7.2.2 and 2.7.3 of ASCE/SEI
24-14 [Section 2.6.2.2 of ASCE/SEI 24-05 (2012 and 2009
IBC and IRC)] for a rate of rise and fall of 5 feet per hour
(0.423 mm/s). In order to comply with the engineered
opening requirement of ASCE/SEI 24, Flood Flaps®
automatic FVs must be installed in accordance with
Section 4.0.
3.3 Flood Vent Series Models:
Flood Flaps® automatic FVs are available in two series
with multiple models and sizes as described in Table 1.
The sealed series models, designated FFWF, include two
rubber flaps for the prevention of air flow. The multi-
purpose series, designated FFNF, omits the rubber flaps.
3.4 Natural Ventilation:
Flood Flaps® automatic FV models FFNF12, FFNF08,
FFNF05, and FFNF02 have metal screens with 1/4 inch by
1/4 inch (6 mm b�t 6 mm) openings and provide 37 square
inches (0.02 m) of net free opening to supply natural
ventilation for under -floor ventilation. Flood Flaps®
automatic FV models FFWF12, FFWF08, and FFWF05
have not been evaluated for use as openings for under-
floor ventilation.
4.0 DESIGN AND INSTALLATION
Flood Flaps® automatic FVs are designed to be installed
into walls of existing or new construction. Installation of
the FVs must be in accordance with the manufacturer's
instructions, the applicable code and this report. Flood
Flaps® automatic FVs can be installed in wood, masonry
and concrete walls up to a thickness of 12 inches
(305 mm). In order to comply with the engineered opening
design principle noted in Sections 2.7.2.2 and 2.7.3 of
ASCE/SEI 24-14 [Section 2.6.2:2 of ASCE/SEI 24-05
(2012 and 2009 IBC and IRC)], the Flood Flaps® FVs must
be installed as follows:
■ With a minimum of two openings on different sides of
each enclosed area.
ICC-I# Evaluation Reports are not to be construed as representing aesthetics or any other attributer not specificallyaddressed nor are they to be construed gM
Ias an dorsement ojthesubject ojthe report or a recommendationfor its use. There is no warranty by ICCEvaluation Service; LLC, express or implied, as
to any Ending or other matter in this report, or as to any product covered by the report.
© 2017 ICC Evaluation Service, LLC. All rights reserved. Page 1 of 3
Page 2 of 3
j Most Widely Accepted aria
■ With' a minimum of one FV for every 220 square
feet 0 m2) of enclosed area.
■ Belo the base flood elevation.
■ With the bottom of the FV located a maximum of
121 hes (305 mm) above grade.
5.0 COI DITIONS OF USE
The FI od Flaps automatic flood vents described in this
report omply with, or are suitable alternatives to what is
specfi d in, those codes listed in Section 1.0 of this report,
subjec to the following conditions:
5.1 T e Flood Flaps® automatic FVs must be installed in
a cordance with this report, the applicable code and
.0 a manufacturer's installation instructions. In the
bent of a conflict, the instructions in this report
5.2 The Flood Flaps® automatic FVs must not be used in
place of "breakaway walls" in coastal high hazard
areas, but are permitted for use in conjunction with
breakaway walls in other areas.
6.0 EVIDENCE SUBMITTED
Data in accordance with the ICC-ES Acceptance Criteria
for Mechanically Operated Flood Vents (AC364), dated
August 2015.
7.0 IDENTIFICATION.
The Flood Flaps® models recognized in this report are
identified by a label bearing the manufacturer's name,
the model number, and the evaluation report number
(ESR-3560).
TABLE 1—FLOOD FLAP AUTOMATIC FLOOD VENT MODEL SIZES
MODEL
DESIGNATION
kNBER
JI
Sealed Series
Multi -Purpose
Sealed Series
Multi -Purpose
FFVVF05
Sealed Series
FFNF05
Multi -Purpose
sr. 1 incn = ca.•+ mill, 1 1 - ...
under -floor ventilation only.
ROUGH OPENING
(Width X Height)
(inches)
16x8
16x8
16x8.
16x8
16x8
16x8
VENT SIZE
(WXHXD)
(inches)
55/aX714X12
5/eX /4X12
15/e�/4x8
15/ex /4x8
5-T1.x7/
155/A x 7'/4 x 5
ENCLOSED AREA
COVERAGE
220
220
220
NET FREE AREA
OPENING'
(in2)
NA
37
37
NA
37
Most Widely Acceptec l— of Trusted
Page 3 of 3
FFWF:L2.
12" DEPTH
FIGURE 1—FLOOD FLAPS® AUTOMATIC FLOOD VENT
FFN F0
FFN FOS
FIGURE 2—FLOOD FLAPS® AUTOMATIC FLOOD VENT SERIES MODELS
8" DEPTH
5" DEPTH
FIGURE 3—FLOOD FLAPS® AUTOMATIC FLOOD VENTS MULTIPLE DEPTH OFFERINGS