HomeMy WebLinkAboutEVALUATION REPORT - UNDERLAYMENTSPolyglass L
1111 West
Deerfield B
(954) 233-]
SCOPE:
j This Evalu;
constructic
for use of
described
herein.
NEMO I etc.
Certificate of Authorization #32455
353 Christian Street, Unit #13
Oxford, CT 06478
(203) 262-9245
EVALUATE TEST CONSULT CERTIFY
REPORT
Inc.
ort Center Drive
FL 33442
Evaluation Report P12060.02.09-R24
FL5259-R28
Date of Issuance: 02/24/2009
Revision 24: 01/24/2018
an Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
materials in the State of Florida. The documentation submitted has been reviewed by Robert Nieminen, P.E.
e product under the Florida Building Code and Florida Building Code, Residential Volume. The products
rein have been evaluated for compliance with the a Edition (2017) Florida Building Code sections noted
LABELING: L 3beling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted herein.
CONTINUED,i MPLIANCE: This Evaluation Report is valid until such time as the named product(s) changes, the referenced
Quality Assl rance documentation changes, or provisions of the Code that relate to the product change. Acceptance of this
Evaluation Report by the named client constitutes agreement to notify Robert Nieminen, P.E. of any changes to the
product(s),� the Quality Assurance or the production facility location(s). NEMO Jetc. requires a complete review of this
Evaluation l eport relative to updated Code requirements with each Code Cycle.
ADVERTISEM NT: The Evaluation Report number preceded by the words "NEMOletc. Evaluated" may be displayed in
advertising, literature. If any portion of the Evaluation Report is displayed, then it shall be done in its entirety.
INSPECTION: ton request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or its
distributor; and shall be available for inspection at the job site at the request of the Building Official.
This Evaluai ion Report consists of pages 1 through 14.
Prepared
Robert J.N
Florida Regi
CERTIFICATIOI
1. NEMOI
distribu
2. NEMO
1 3. Robert
which It
4. Robert
5. This is a
project
specific
Nieminen, P.E.
ration No. 59166, Florida DCA ANE1983
The facsimile seal appearing was authorized by Robert Nieminen,
P.E. on 0112412018. This does not serve as an electronically
signed document.
)F INDEPENDENCE:
c. does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or
ig products it evaluates.
c. is not owned, operated or controlled by any company manufacturing or distributing products it evaluates.
eminen, P.E. does not have nor will acquire, a financial interest in any company manufacturing or distributing products for
, evaluation reports are being issued.
eminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
gilding code evaluation. Neither NEMO I etc. nor Robert Nieminen, P.E. are, in any way, the Designer of Record for any
which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless retained
for that purpose.
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
ERD
Mil
Pol,
Pol,
P&
U L,
5T 6049)
5T 6049)
5T 6049)
5T 6049)
ST 6049)
5T 6049)
5T 6049)
5T 6049)
S r 6049)
5T 6049)
5T 6049)
5T 6049)
5T 6049)
5T 6049)
5T 6049)
5T 6049)
5T 6049)
5T 6049)
ST 6049)
5T 6049)
5T 6049)
ST 6049)
5T 6049)
ST 6049)
5T 6049)
ST 6049)
5T 6049)
ST 6049)
5T 6049)
(EVIL 2396)
Dade (CER 1592)
iss USA
iss USA
iss USA
:. (QUA9625)
4. PRO66CT DESCRIPTION:
Examination
Physical Properties
Physical Properties
Physical Properties
Wind Uplift
Physical Properties
Wind Uplift
Wind Uplift
Wind Uplift
Wind Uplift
Wind Uplift
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Wind Uplift
Physical Properties
Wind Uplift
Physical Properties
Physical Properties
Physical Properties
IBC Compliance
HVHZ Compliance
Manufacturing Affidavit
P/L Affidavit
Materials Affidavit
Quality Control
Reference
P40390.08.12-1
P40390.08.12-2
C41420.09.12-3
P39680.03.13
P45370.04.13
131738.02.07-112
11757.04.01-1-R1
P41630.08.13
P11751.05.03-R1
P11781.11.03-R1
P45270.05.14
6020,07,14-1
6020.09.14-2
6020.09.14-3
6020.09.14-4
6020.09.14-5
6020.09.14-6
P46520.10.14
P43290.10.14
PLYG-SC7550.03.15
P40390.04.15
P44360.10.14-R1
PLYG-SC8080.05.15-1
PLYG-SC8905.05.16-1
PLYG-SC8080.07.16
PLYG-SC12025.10.16
PLYG-SC13040.12.16
PLYG-SC11900.03.17
PLYG-SC12115.08.17
ESR-1697
NOA 14-0717.08
Products Current
Mule -Hide Cross Ltg
Polystick SA Compound
Service Confirmation
ONEMO etc.
Date
08/06/2012
08/07/2012
09/11/2012
03/04/2013
04/26/2013
04/29/2013
04/30/2013
08/06/2013
11/26/2013
11/26/2013
05/12/2014
09/08/2014
09/08/2014
09/08/2014
09/08/2014
09/08/2014
09/08/2014
10/03/2014
10/17/2014
03/24/2015
04/03/2015
05/18/2015
05/20/2015
05/17/2016
07/16/2016
10/12/2016
12/27/2016
03/10/2017
08/08/2017
11/01/2014
01/22/2015
02/18/2009
03/01/2008
08/18/2011
Exp.10/05/2018
14.1 jj'j Mechanically Fastened Underlayments: I
4.1.1 Elastobase is a fiberglass reinforced, SBS modified bitumen base sheet.
4.1.2 Elastobase P is a polyester-rei nforced, 5BS modified bitumen base sheet.
4.1.3 Polyglass G2 Base is a fiberglass -reinforced, asphaltic base sheet.
4.1.4 Polyglass APP Base is a fiberglass -reinforced, APP modified bitumen base sheet.
4.2 I Self -Adhering Underlayments:
4.2.11 Polystick MTS or Polystick MTS PLUS is a nominal 60-mil thick rubberized asphalt waterproofing membrane, glass
fiber reinforced, surfaced with polyolefinic film surface; meets FRSA/TRI April 2012.
4.2
NEMO ETGi LLC.
Certificate o`puth
Polystick TU Plus is a nominal 80-mil thick rubberized asphalt waterproofing membrane, glass fiber reinforced, with a
polyester fabric surface; meets ASTM D1970 and FRSA/TRI April 2012.
Evaluation Report 1312060.02.09-1124
#32455 6EDITION (2017) FBC NON-HVHZ EVALUATION FL5259-R28
Polyglass Roof Underlayments, (954) 233-1230 Revision 24: 01/24/2018
Page 3 of 14
5.5
Allowable Roof Covers:
ONEMOjetc.
TABLE I: ROOF COVER OPTIONS
Undei',layment
Asphalt Shingles
Nail -On Tile
Foam -On Tile
Metal
wood Shakes
& Shingles
Slate
Elasto
lase
Yes
Yes
(Base Sheet in 2-ply system)
Yes
(Base Sheet In 2-ply system)
Yes
Yes
Yes
EI85tOPa5e
II
P
Yes
es
(Base Sheet n 2-pry system)
Yes
ply system)
(Base sheet in 2-ply
Yes
Yes
Yes
Polyglllss
G2 Base
No
Yes
(Base Sheet in 2-ply system)
Yes
(Base Sheet In 2-ply system)
No
No
No
Polygl
ss APP Base
No
Yes
(Base Sheet in 2-ply system)
Yes
(Base Sheet In 2-ply system)
No
No
No
Polys,
ck MTS or MTS PLUS
Yes
Yes
No
Yes
Yes
Yes
�Po`ys
Polysi(,
ck!IR-Xe
k TU P
Yes
No
No
Yes
No
Yes (See 5.5.1)
No
No
Yes
No
Yes
No
Polys,
�kTU Plus
Yes
Yes
Yes (See 5.5.1)
Yes
Yes
Yes
Polys,
k TU Max
No
Yes
Yes (See 5.5.1)
Yes
No
No
Polys,
k Dual Pro
Yes
No
No
Yes
Yes
Yes
Polys,
fkTile Pro
Yes
Yes
Yes (See 5.5.1)
Yes
Yes
Yes
Polys,
ck MU-X
Yes
No
No
Yes
Yes
Yes
Elasto
ex S6 G
Yes
Yes
Yes (See 5.5.1)
No
Yes
Yes
Elasto
ex S6 G FR
Yes
Yes
No
No
Yes
Yes
Elasto
ex G TU
Yes
Yes
Yes (See 5.5.1)
No
Yes
Yes
Polyfl
G
Yes
Yes
Yes (See 5.5.1)
No
Yes
Yes
Polyfl
G FR
Yes
Yes
No
No
Yes
Yes
Polyfl,
SAP or SAP FR
Yes
Yes
Yes (See 5.5.1)
No
Yes
Yes
Mule
or SA',
ide SA-APP Cap Sheet
PP Cap Sheet (FR)
Yes
Yes
Yes (See 5.5.1)
No
Yes
Yes
5.5.1 "Foam -On Tile" is limited to use of the following Approved tile adhesives / underlayment combinations.
it
TABLE
1A: ALLOWABLE TILE ADHESIVE / UNDERLAYMENT COMBINATIONS)
Adhesive
Florida Product
Underlayments
Approval
DAP
In Seal Storm Bond Roof
IDamTouch
Tile q,
hesive
FL14506
PolystickTU Plus, PolystickTU Max
Dow
ileBond-
FL22525
Polystick TU P, Polystick TU Plus, Polyflex SAP or Tile Pro
PolystickTU P, PolystickTU Plus, PolystickTU Max, Polystick Tile Pro,
ICP A'
hesives Polyset® AH-160
FL6332
Elastoflex G TU, Elastoflex S6 G, Polyflex G, Polyflex SAP, Polyflex SA Cap FR,
Mule -Hide SA-APP Cap Sheet or Mule -Hide SA-APP Cap Sheet (FR)
PolystickTU P, PolystickTU Plus, PolystickTU Max, Polystick Tile Pro,
ICP A
hesives Polyset® RTA-1
FL6276
Elastoflex G TU, Elastoflex S6 G, Polyflex G, Polyflex SAP, Polyflex SA Cap FR,
Mule -Hide SA-APP Cap Sheet or Mule -Hide SA-APP Cap Sheet (FR)
II I
1 Referto Re Manufacturer's or Adhesive Manufacturer's Florida Product Approval for Overturning Moment Resistance Performance.
NEMO ETC U.C. Evaluation Report P12060.02.09-R24
Certificate a' 4uthorization N32455 67H EDITION (2017) FBC NON-HVHZ EVALUATION F1.5259-1128
Polyglass Roof Underlayments; (954) 233-1230 Revision 24: 01/24/2018
Page 5 of 14
m
5.6
fONEMOlet1c.
Polystick.(all variations), Dual Pro, Tile Pro, Polyflex SAP or SAP FR, Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet
(FR) self -adhered to:
➢ New untreated plywood; ASTM D41 primed new untreated plywood; Existing plywood; ASTM D41 primed existing
plywood; New or existing, unprimed OSB; ASTM D41 primed OSB; Southern Yellow Pine; ASTM D41 primed
Southern Yellow Pine; ASTM D41 primed structural concrete; Huber Engineered Woods "ZIP System" Panels
(designed and installed to meet wind loads for project).
Note: Polyglass does not require priming of new or existing plywood or OSB sheathing. New or existing plywood or
OSB sheathing should be cleaned of all dirt and debris prior to application of Polystick membranes.
Elastoflex G TU, Elastoflex S6 G or Elastoflex S6 G FR in hot asphalt to:
➢ ASTM D41 primed structural concrete.
Polyflex G or Polyflex G FR torch -applied to:
➢ ASTM D41 primed structural concrete.
Bond -to -Insulation:
Polystick (all variations), Polyflex SAP or SAP FR, Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR) self -adhered
to:
➢ ASTM C1289, Type II, Class 1 polyisocyanurate or Type V polyisocyanurate-composite insulation; Dens Deck
DuraGuard; Dens Deck Prime; or SECUROCK Gypsum -Fiber Roof Board.
Elastoflex G TU, Elastoflex S6 G or Elastoflex S6 G FR in hot asphalt to:
➢ Dens Deck Prime or SECUROCK Gypsum -Fiber Roof Board.
Polyflex G or Polyflex G FR torch -applied to:
➢ ASTM D41 primed structural concrete; Dens Deck Prime or SECUROCK Gypsum -Fiber Roof Board.
For installation under mechanically attached prepared roof coverings, insulation shall be attached per minimum
requirements of the prepared roof covering manufacturer's Product Approval. For installations under foam -on tile
systems, insulation attachment shall be designed by a qualified design professional and installed based on testing of
the insulation/underlayment system in accordance with FBC Section 1SO4.3.1.
Bond to Mechanically Attached Base Laver:
Polystick (all variations), Polyflex SAP or SAP FR, Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR) Dual Pro or
Tile Pro self -adhered to:
➢ ASTM D226, Type I or II felt; Elastobase; Elastobase P or Mule -Hide Nail Base.
Elastoflex G TU, Elastoflex S6 G or Elastoflex S6 G FR in hot asphalt to:
➢ ASTM D226, Type I or II felt; Elastobase; Elastobase P, Mule -Hide Nail Base or Polyglass G2 Base.
Polyflex G or Polyflex G FR torch -applied to:
➢ Elastobase; Elastobase P, Mule -Hide Nail Base, Polyglass G2 Base or Polyglass APP Base.
For. installations under mechanically attached prepared roof coverings, base layer shall be attached per minimum
codified requirements. For installations under foam -on tile systems, base layer shall be attached per minimum
requirements of FRSA/TRI April 2012 (04-12), Appendix A, Table 1, or as listed in Section 5.6.4 herein, or as tested in
accordance with FBC Section 1504.3.1.
MEMO ETO U.C. Evaluation Report P12060.02.09-R24
Certificate oj, uthonzation #31455 6EDITION (2017) FBC NON-HVHZ EVALUATION FI5259-R28
Polyglass Roof Underlayments, (954) 233-1230 Revision 24: 01/24/2018
Page 6 of 14
6.
INNEMOletc.
INST' LLATION:
6.1 Polyglass Roof Underlayments shall be installed in accordance with Polyglass published installation requirements
subject to the Limitations set forth in Section 5 herein and the specifics noted below.
6.2 Re -fasten any loose decking panels, and check for protruding nail heads. Sweep the substrate thoroughly to remove
any dust and debris prior to application, and prime the substrate (if applicable).
6.3 �I'I Elastobase, Elastobase P or Mule -Hide Nail Base:
6.3. Non -Tile Applications:
Shall be installed in compliance with the codified requirements for ASTM D226, Type II underlayment in FBC Table
1507.1.1 for the type of prepared roof covering to be installed.
Elastobase, Elastobase P or Mule -Hide Nail Base may be covered with a layer of Polystick, Polyflex SAP, Polyflex SA
P FR, Mule -Hide SA-APP Cap Sheet or SA-APP Cap Sheet (FR), self -adhered, Elastoflex G TU, Elastoflex S6 G or
Elastoflex S6 G FR in hot asphalt or Polyflex G or Polyflex G FR, torch applied. Roof cover limitations are those are
those associated with the top -layer underlayment, as set forth in Table 1.
6.3. Tile Applications:
Elastobase, Elastobase P or Mule -Hide Nail Base are limited to use as a mechanically attached base sheet in the `Two
Ply System" from FRSA/TRI April 2012 (04-12). Reference is made to Table 1 and Section 5.6.4 herein, coupled with
FRSA/TRI April 2012 (04-12) Installation Manual.
NEMO El
Certificate
Shall be installed in compliance with the codified requirements for ASTM D1970 (except Polystick TU P) underlayment
in FBC Table 1507.1.1 for the type of prepared roof covering to be installed.
Direct -to -Deck with Mechanically Fastened Roof Covers:
All self -adhering materials, with the exception of Polystick TU Plus, Polyflex SAP or SAP FR and Mule -Hide SA-APP
Cap Sheet or SA-APP Cap Sheet (FR) should be back -nailed in selvage edge seam in accordance with Polyglass / Mule -
Hide back nailing guidelines. Nails shall be corrosion resistant, 11 gauge ring -shank type with a minimum 1-inch
diameter metal disk or Simplex -type metal cap nail, at a minimum rate of 12" o.c. Polystick TU Plus should be back -
nailed using the above noted fasteners and spacing, in area marked "nail area, area para clavar" on the face of
membrane. The head lap membrane is to cover the area being back -nailed.
All seal -lap seams (selvage laps) must be
firmly rolled with a minimum 28 lb. hand F
roller to ensure full contact and adhesion. ,
For Dual Pro and Tile Pro, align the edge of ;: k
the top sheet to the end of the glue pattern
(the sheet will overlap the fabric).
View of Ovelap Seam of Dual Pro and Tile Pro
All over -fabric and over -granule end -laps shall have a 6-inch wide, uniform layer of Polyplus 50 Premium Modified
Wet/Dry Cement or Polyglass PG500 Modified Cement applied in between the application of the lap.
Polystick TU Plus, Dual Pro and Tile Pro may not be used in any exposed application such as crickets, exposed valleys,
or exposed roof to wall details
d' EDITION (2017) FBC NON-HVHZ EVALUATION
Polyglass Roof Underlayments; (954) 233-1230
Evaluation Report P12060.02.09-1124
FL5259-R28
Revision 24: 01/24/2018
Page 12 of 14