HomeMy WebLinkAboutSTEP ANCHORING GUIDELINESsrn_EcREsr.
Fiberglass Step Anchoring
Guidelines
Concrete Installation
list ofComponeets (Purchased Locally)
2eafi V4°x35x 3
e 2eab W'x2'fx I3W BDb3 Lb�
L
tea% 2mh u4• 4mb MI'Aft
t•a'J�' o» 2mhv4'vmras
Concrete Installation Guidelines
1) Drill'/a" hole through step and bracket at
desired position through lower wooden
frame member.
2) install L-brackets using K" x 20 x 21W
Bolts, washers, and nuts.
3) Mark locarion of hole in L-bracket on the
concrete.
4) ?Wove the step away from the house. Drill
holes in concrete at the desired locations.
Tap in %d' concrete anchors.
5) Replace step so that the tops of the concrete
anchors protrude through the L-brackets.
Secure with the nuts and washers.
Ground Installation
List of Components
(2) 484154 Anchor Assemblies
Each assembly includes:
(1) 15 inch Anchor
(1) 3t8" x i W lag screw
(1) V16" X 1 ''14" washer
M
Ground Installation Guidelines
1) Set step in des ired position and mark the
anchor placements on the ground. Remove
step.
2) Screw the anchors in the ground so that the
eye of the anchor will be in the position as
shown.
3) Replace step and mark the place where the
hole in the eye of the anchor meets the side
of the step at the height of the lower frame
member.
4) Fasten screw into lower frame member
though eye of the anchor and washer.
WARNING: Failure to anchor the step properly
can result in injury. Place the step against the
house. Make sure the surface on which the step
rests is level.
Style Crest. lac. Drawer A Fremont, Ohio 43420