HomeMy WebLinkAboutNOAMIAMI-DADS COUNTY
i � PRODUCT CONTROL SECTION
.l .i�id' REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 street, Room 208
BO �RD DE ADMINISTRATION DIVISION Malat Florida 33175 2474
T (786) 315-2590 F (786) 315-2599
NOTICE OF ACCEPTANCE (NOA) WWW:mfaSAld8tl=py(&Qm�
Owens Corning Roofing and Asphalt, LLC SCANNED
One Owens Corning Parkway BY
Toledo; OR 43659 St. Lucie County
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami -Dade County RER -Product Control Section to be
used in Miami -Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control Section
(in Miami -Dade County) and/or the AHJ (in areas other than Miami -Dade County) reserve the right to have this
product or material tested for quality assurance purposes. If this product or material fails to, perform in the accepted
manner, the manufacturer will incur the expense of such testing and the AHJ may immediately, revoke, modify, or
suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance,
if it is determined by Miami -Dade County Product Control Section that this product or material falls to meet the
requirements of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Oakridge®, TruDefinition Oakridge@, and TruDefinition Oakridge® Artisan Colors
Shingles
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida,'and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA renews NOA No. 12-0430.01 and consists of pages 1 through 4.
The submitted documentation was reviewed by Gaspar J Rodriguez.
APPrt AWED•yJil�)
NOA No.: 15-1102.03
Expiration Date: 02/03/21
Approval Date: 01/21/16
Page I of 4
ROOFING ASSEMBLY APPROVAL
Category:
Roofing
Sub -Category:
Asphalt Shingles
Materials:
Laminate
Deck Tvve:
Wood
SCOPE
This approves a roofing system using Oakridge®, TruDefinition Oakridge®, and TruDeffnition Oakridge®
Artisan Colors asphalt shingles manufactured by Owens Coming as described in Section 2 of his Notice of
Acceptance.
PRODUCT DESCRIPTION
Product
Oakridge®,
TruDefinition Oakridge®, and
TruDefinition Oakridge®
Artisan Colors
Manufacturing
Locations 91, 2, 3, 4
Oakridge®,
TruDefinition OakridgeO, and
TruDefinition Oakridge®
Artisan Colors
Manufacturing
Location #1, 2, 3, 4, 5
Dimensions Test Product Description
Specifications
13 '/a" x 39 3/9" TAS 110 A heavy weight, fiberglass reinforced laminate
asphalt shingle with continuous bead of
sealant.
13 '/a" x 39 3/s" TAS 110 A heavy weight, fiberglass reinforced laminate
asphalt shingle with dashed bead of sealant.
MANUFACTURING LOCATION
L Memphis, TN
2. Irving, TX
3. Savannah, GA
4. Jacksonville, FL
5. Atlanta, GA
EVIDENCE SUBMITTED
Test Agency
Test Identifier
Test Name/Report
Date
PRI Construction
OCF-153-02-01
TAS 100
Materials Technologies
OCF-152-02-01
TAS 100
09/22/10
OCF-158-02-01
TAS 100
09/21/10
OCF-151-02-01
TAS 100
11/10/10
OCF-130-02-01
TAS 100
09/27/10
OCF-165-02-01
TAS 100
09/21/10
OCF-170-02-01
TAS 100
Ol/07/11
OCF-177-02-01
TAS 100
06/06/11
OCF-178-02-01
TAS 100
12/05/11
02/02/12
rt[ANWW pgcourrry
NOA No.: 15-110 m
Expiration Date: 02/03/21
Approval Date: 01/21/16
Page 2 of 4
Underwriters 09NK14530 ASTM D 3462
12/31/09
Laboratories R2453 ASTM D3462
10/11/10
R2453 ASTM D 3462
11/03/10
R2453 ASTM D 3462
10/11/10
R2453 ASTM D 3462
10/11/10
R2453 ASTM E 108
01/13/11
R2453 ASTM E 108
10/11/10
R2453 ASTM E 108
11/03/10
R2453 ASTME 108
10/11/10
R2453 ASTM E 108
10/11/10
09NK14530 TAS 107 (ASTM D 3161)
12/31/09
R2453 TAS 107 (ASTM D 3161)
10/27/15
IONK13947 TAS 107 (ASTM D 3161)
11/12/10
R2453 TAS 107 (ASTM D 3 16 1)
10/11/10
R2453 TAS 107 (ASTM D 3161)
10/27/15
IONK13947 TAS 107 (ASTM D 3161)
01/28/11
I ICA15662 TAS 107 (ASTM D 3161)
05/27/11
I ICA65092 ASTM D 3462 / TAS 107 (ASTM D 3161) / ASTM E 108
02/14/12
11 CA40912 ASTM D 3462 / TAS 107 (ASTM D 3161) / ASTM E 108
11/30/11
LIMITATIONS
1. Fire classification is not part of this acceptance; refer to a current Approved Roofing Materials Directory for
fire ratings of this product.
2. Shall not be installed on roof mean heights in excess of 33 ft.
3. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code
and Rule 61 G20-3 of the Florida Administrative Code.
INSTALLATION
1. Shingles shall be installed in compliance with Roofing Application Standard RAS 115.
2. Flashing shall be in accordance with Roofing Application Standard RAS 115
3. The manufacturer shall provide clearly written application instructions.
4. Exposure and course layout shall be in compliance with DetaU A', attached.
5. Nailing shall be in compliance with Detail 'B', attached.
LABELING
1. Shingles shall be labeled with the Miami -Dade Seal as seen below, or the wording "Miami -Dade County
Product Control Approved".
MIAMI-DADECOUMY
BUILDING PERMIT REQUIREMENTS
1. Application for building permit shall be accompanied by copies of the following:
1.1 This Notice of Acceptance.
1.2 Any other documents required by the Building Official or the applicable code in order to
properly
evaluate the installation of this system.
APPROVED
NOA No.: 15-11ou:l
Expiration Date: 02/03/21
Approval Date: 01/21/16
Page 3 of 4
DETAIL A
DETAIL B
1
14"
END OF THIS ACCEPTANCE
APPROVED
EXPOSURE
NOA No.: 15-1102.03
Expiration Date: 02/03/21
Approval Date: 01/21/16
Page 4 of 4